Zune will not copy 720p videos, which were created...

Hi,
I bought a Lumia 710 roughly a week ago. I recorded a bunch of 720p videos, synced them with my PC with Zune, and deleted some of them from the phone.
Today I wanted to copy one of them back to the phone so I could watch it on a DLNA-enabled TV, but Zune converted it first, lowering the quality and I cannot find a way to skip the conversion.
Before I purchased the phone I read about Zune and how the sync works, and I knew it would convert unsupported videos if possible, but in this case it's absolutely unnecessary.
I think it happens because the phone itself has 800x480 screen, so Zune *thinks* it's pointless to copy 1280x720 video to it. However the converted video looks terrible on a TV through DLNA.
Is there a way to change phone profile in the drivers or something to prevent this conversion?
(Sorry for bad english, I'm a little bit nervous right now.)

Are you aware that you've posted in the iTunes for Mac forum? You might have better luck solving the problem if you post in iTunes for Windows. Perhaps someone there will be able to help you.

Similar Messages

  • Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone no longer play), unable to transfer to computer either. Says Parameter error when I try to copy or play file

    My Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone), unable to transfer to computer either. Says Parameter error when I try to copy or play file. very frustrating, not being able to access past videos taken at all. This has been going on for a while now

    Have you done any of the basic troublshooting steps described in the User Guide (Appendix B) - Restart, Reset, Restore?

  • HP Officejet Pro 8600 Premium will not copy or scan.

    Hello,
    I have a HP Officejet Pro 8600 Premium that prints just fine however it will not copy or scan. When I attempt to copy a document it displays Starting Copy... on the printer but will not copy and must be turned off and on to use the printer again. When I attempt to scan it brings up an error box telling me to check all of my network connections.
    I have already tried the services.msi fix and have ran hp printer and scannor doctor tool to attempt to fix my problem. 
    In the services.msi I found that all services dependant on (WIA) were already running and set to automatic.
    The scan doctor found that It wasn't communicating with the drivers, which I then reinstalled, and restarted the computer. It then continued to have problems with the drivers and asked me to contact support.
    Thank you for your time.
    edit: The printer is also running the latest firmware and I have also checked my anti-virus firewall so that it is allowing the printer through network. (note: in attempt to fix the issue i have both a usb and network connection trying to get either connection to work).

    Hi-
    To make sure I understand this correctly, you are unable to do a copy at the device itself?   This should function without the device being connected to a PC at all.   if this is indeed the case, it sounds as if this is a hardware issue.  I would then check with HP support on your product for warranty repair.
    I am an HP employee, however, this content reflects my personal opinion and is in no way associated with HP.

  • My macbook will not load online videos

    My macbook will not load online videos such as youtube or CNN. the videos will just be a black screen and will not load. i have tried using different browsers and also have uninstalled and reinstalled Adobe. what else could it be? Thanks

    If you can't install or update Flash, follow these instructions.
    If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
    Step 1
    You might have to log out or restart the computer before a Flash update takes effect.
    Step 2
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Close the window. Then select
               ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Step 3
    If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 4
    a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
              When visiting other websites
    From that menu, select either Allow or Ask.
    b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
    c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
    Right-click or control-click the highlighted text and select
              Services ▹ Open
    from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 5
    In the Safari preferences window, select the Advanced tab and uncheck the box marked
              Stop plug-ins to save power
    Step 6
    Open this folder as in Step 4:
    /Library/Internet Plug-Ins
    Delete the following item, or anything with a similar name, if present:
              Flash Player (failing).plugin 
    You may be prompted for your login password.
    Step 7
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 8
    If you get a "missing plug-in" error, select
              Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked  
              Allow (or Enable) plug-ins
    Then click the button marked
              Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 9
    Select
              Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.

  • Will Not Copy After Being Idle

    THIS IS A COPYING ISSUE!!!  After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print.  I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem.  Consequently, we purchased a new HP 5740 printer  The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work.  If you then turned the printer off and immediately turned it back on, it would copy.  Again, Comcast reiterated it was a printer problem.   I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer.  After hooking up the second HP 5740, the same problems with copying occurred.  I returned the second HP 5740 to the dealer for a refund and left town for three months.  We recently returned and purchased a HP ENVY 7645 printer from another dealer.  We are having the same issues with this printer as we had with the two previous HP 5740 printers.  I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician.  The installation occurred today and we are still experiencing exactly the same problem.  The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy.   He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem.  DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

    Hi @lamoso,
    Welcome to the HP Forums!
    I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
    I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
    After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
    Let's see what happens after giving these two steps a try!
    Thank you for posting!
    “Please click the Thumbs up icon below to give me a virtual high-five for responding.”
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Printer will not copy but will print from the computer

    Hp Photosmart D110 all in one printer--I am totally disgusted with this printer...have had it a few months.  It will only get about 160 economy pages per ink cartridge which is ridiculous.  So we bought an ink refill kit and just refilled and reinstalled the black ink cartridge.  it is printing from the computer just fine but the printer WILL NOT COPY.  When I use the tool box and check ink levels it just shows question marks on both ink cartridges.
          I spent 45 minutes on HP Chat Support and got no answers except that I need to use genuine HP Cartridges. They could not explain to me why the printer would print but not copy with refilled cartridge.
        Any help from any of you regarding the NOT copying and the ink cartridges.....thanks so much

    Did you ever get it to copy? I have the same problem

  • OGMRIP is broken... will not rip any video.

    I am firstly not sure if this section is the correct one, if not then i am sorry
    After changing over from Ubuntu to Arch i still wanted to rip my dvd's into high quality MKV files using the program "ogmrip".
    After installing all the packages wich it depends on i installed the program itself and it seemed to work just fine, but it will not rip any videos.
    It keeps telling me that the codec is not supported by the video output and then fails.
    This is actually a known issue with version 0.13.4 and was solved by means of a patch or by replacing it with version 0.13.5 ...
    Without the patch this version of the package is useless, so can someboddy tell me how to contact the maintainer and advice him of this ?
    It would be nice to have the latest and correct version in the repo's
    UPDATE
    created the package and placed it in aur and i will also mail the maintainer of the file.
    Last edited by Dennis Beekman (2010-06-29 14:19:22)

    It's already flagged out-of-date, which means the maintainer is aware of the new release. If you're in a hurry, build a 0.13.5 package for yourself using the Arch Build System.

  • Have a MF8580Cdw that will not copy

    Have a MF8580Cdw that will not copy. The little lights on the B&W and color start buttons are no longer lit up either.

    Sounds as if it's a hardware issue - if I were you, I'd take the unit into your local Apple Store or an AASP and have them run diagnostics on the machine. I'm fairly certain that it's a hardware problem.
    Clinton

  • Songs will not copy to iPod - authorization issue?

    My apologies first if this topic has been covered already.
    I just bought a shiny new 5Gen iPod and I need to load it up. Problem: any songs/videos I have purchased through the ITMS previously (with old iPod) will not copy to the new iPod.
    Is this an authorization issue? How do I correct this? AND if I get the new iPod authorized correctly, does this mean I can no longer transfer stuff onto the old one?
    How do any of you with more than one iPod handle this?
    Please and thank you!
    Powerbook G4 Titanium Mac OS X (10.4.2)

    There are a few things you can do if this happens. Here are the first steps...
    Have you played the songs in iTunes for a few seconds? This will authorize them. Now sync your iPod. Do they play?
    If not, make sure everything is up to date on your computer...
    iTunes
    iPod Updater
    If that doesn't work, in iTunes, go to advanced-->deauthorize computer. Now play the songs in iTunes. It will ask for your account information (from the iTunes Music Store). Enter that. Now play a few purchased songs for a few seconds. Sync your iPod. Do the songs work now?
    If they don't, please post back for more suggestions.
    btabz

  • Purchased music videos from iTunes but it will not play, no video or sound

    Purchased music videos from iTunes but it will not play, no video or sound. There were several vidoes on the purchase I made and two of the videos will not play the video or sound. I've checked to see if they were waiting for download and nothing is there. Any suggestions.

    Is your iTunes account authorized for this computer in iTunes? - to check, open iTunes, and in the top menu bar, select "store", then "authorize this computer".  How to Authorize iTunes - http://www.apple.com/support/itunes/authorization/.

  • Windows media player will not play tutorial videos

    I get messages that my media player will not read the video tutorials.

    Sorry, a little new to Adobe forums.  Basically I bought Photoshop Elements which provides several online tutorials.  Buried in the tutorial page was the note that they show best with Quicktime.  Problem solved.  Adobe software problem, no.

  • HP Officejet Pro 8600 Plus will not copy even after hard reset

    HP Officejet Pro 8600 Plus on Windows 8 OS 
    Will print from computer; will scan documents & save to computer; will NOT copy document on the unit.
    Shut down printer; unplugged from wall and back of unit; held on/off button for 60 seconds; plugged back in; started unit.
    Placed document on glass; hit copy; hit black; Unit pulls sheet of paper; unit scans document (squeaks while scanning); after period of time, it spits out paper & reads "copy cancelled", but does not clear or return to home screen.
    HELP!!
    This question was solved.
    View Solution.

    Hello,
    Please check your private message inbox for the reset I'm going to send you.

  • HP LaserJet 1536dnf MFP will not copy or scan but does print

    My HP LaserJet 1536dnf MFP will not copy or scan but does print.  It does not matter if I use the ADF or the glass.  When copying or scanning I get a completey black page.  The light bar does move from one end of the printer glass to the other.  There are no connectivity issues as the printing function and the e-print function work fine.
    Thank you for your help

    Hi @akb3,
    I understand that when you try to scan or copy, you are getting a black page. I can help you with this.
    Please keep the scanner lid open and then press the copy button.
    Check if the scanner bulb glows.
    Check if the scanner moves freely across the glass.
    If it does not try connecting the printer directly to the wall jack and try again.
    Update the printer's firmware if the bulb glows and scanner moves freely. HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
    If the issue persists, then I would recommend to call HP Tech Support for further assistance to see what other options are available for you at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Contact HP Worldwide.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Photoshop CC 2014 for PC will not copy or paste

    Running:
    Photoshop CC 2014 for PC
    Windows 8.1 Pro, R2 64 bit, AMD FX3 8350 with 16GB RAM. 75% of RAM free
    Photoshop CC 2014 for PC will not copy or paste.
    When I create a line of text and want to copy and paste the text in the same document, the copy and paste functions are not working. The commands on the Edit menu are grayed out. CTL+C and CTL+X and CTL+V do not work.
    I have the correct layer selected.
    There is nothing else selected, just the text.
    Copy and paste fail on new documents, existing documents, documents with backgrounds, documents without backgrounds.
    I deleted all my Photoshop settings in Roaming>Adobe>Photoshop CC 2014
    I uninstalled Photoshop without saving preferences, removed all files and folders and then reinstalled.
    Photoshop will still not copy and paste.

    I honestly don't know what may be wrong on your system to cause what you're seeing, but I can confirm that on my fully updated Windows 8.1 Pro x64 system equipped with ATI 7850 I can do cut/copy/pastes as you would like to do, so it's not a basic incompatibility.
    Are you selecting the characters by dragging the mouse across them, then copying?
    When pasting, have you set an insertion point first?
    -Noel

  • I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    Submit your feedback requesting this feature directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

Maybe you are looking for

  • HTTP error: 500 (Internal Server Error) while creating content server repst

    Hi All, I am getting the HTTP error as mentioned below, HTTP error: 500 (Internal Server Error)"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s My content server is running on a Microsoft Cluster Env

  • ITunes Blue Screen of Death when starting

    Since iTunes 4.7, half the time when I enter iTunes, I get a stop error 0x00000050 or PAGEFAULT_IN_NONPAGEDAREA Sometimes when iTunes starts, it will run just fine, but most of the time it just crashes instantly. When I reboot, the computer says its

  • Broadcom 802.11ac Windows 8.1 won't connect to wifi router

    I'm using a asrock z87E-ITX with Broadcom 802.11ac wireless adapter, and windows 8.1 my wireless adapter won't connected to my zte f660 wireless router, but it's connected to any mobile phone thetered device. The problem is when i try to connect, the

  • How Do I Edit a Text File in PowerShell??

    How do i edit the text (or paragraphs) in text files using PowerShell? Thak You

  • Xine broken (solved)

    After a reboot all of the applications that use xine now donot work anymore. For example, the login & logout sound is gone, and when I start Amarok from terminal, I get these: $ amarok KGlobal::locale::Warning your global KLocale is being recreated w