A/P Down payment Request

Dear Experts,
While I make and AP down payment request, and make the payment against that Down payment request the system hits the Rate different account as my vendor is Local vendor and there is not involvement of multi-currency.
Help Required,
Thanks & Regards

Hi,
I am afraid that you have used multicurrency GL account code in the GLAD or in the BP master data. To make sure, let me know if it happened in certain local vendor or all local vendors.
JimM

Similar Messages

CO Object Assignment Error while posting Down Payment Request

User is raising a Down Payment Request for the purchase of an Asset through a Purchasing Document. This Asset Master has got the cost center and WBS Element assigned in it.
System while saving the DP Request is throwing an error that CO Account Assignments has different Profit Centers
I have also checked the cost center master but the profit center assigned there is correct only. Should I check the OKB9 settings ? If yes, for which GL Account do I need to check ? Where else can I check the CO Object Assignments for profit centers ?
Requirement is critical. Please help.
Thank you
Ravi
9849393564

Hi,
Good evening and greetings,
Please have a look in GGB1 (Profit Centre Substitution), there may be some rule which is overriding the OKB9.
Please reward points if found useful.
Thanking you,
With kindest regards,
Ramesh Padmanabhan

Vendor down payment request over PO value

Hi All,
I have a requirement for vendor down payment request amount compare to PO value checking.
I have PO with total value - 600 USD.
When I create down payment request using F-47, I input amount 1000 USD.
The system never show me any message.
I want the SAP to block me from posting down payment request over PO value.
I've read in the forum, to change message type F5373 with error type. But the message never appear in my F-47 screen.
Anyone can help me, what am I missing here ?
Thanks,

Hi,
You are right about message F5 373. But this is applicable at the time of the Payment of the Advance i.e. F-48. It is not available at the time of creating the Advance Payment Request against T Code F-47.
If you want to have this control in the Payment Request, then you will have to use the validation, which you can put with the help of your abaper.
Regards,
Amit

Vendor down payment request Error

Hi all,
i created a vendor down payment request using f-47. I had created a tax code for the country "AE" using FXTP. But when in the vendor down payment request it is not picking the tax code,giving the error "Tax code AN for country AE has been deleted or incorrectly changed", Message no. FS201
Kindly help me,
Thanks in advance
Ani Varghese

Hi,
The reason behind this error is that the TAX CODE IS NOT CORRECTLY MAINTAINED.
You might not have maintained the GL Accounts for this. Maintained it in OB40.
Regards,
Amit

Vendor Down payment request

Hi,
I have 2 queries regarding vendor down payment request F-47
1) Want to create DPR on header level (We have ECC.6 No enhancement package)
2) When I create DPR on item level of more then item value it will stop me & show error but when ever I will create multiple request of same line item with actual amount or less amount (but more then actual amount in total) will be not stop me.
I already active F5 373 message into error.
Thanks,
Farrukh khan

Hi,
You are getting this error becausea either you have giving more amount than the PO value or GRN and IV has already been created for this item.
You are requested to do create DPR as per below given screen shots
Press Enter
Click on
Hope, this solves your issue.
Regards,
Tejas

Vendor Down Payment Request on WBS (F-47)

Dear Fellows:
I have came across a problem that while creating a Vendor Down Payment request (T.code: F-47) on WBS, my system is not stoping me over budget exhaust. I have Budget of 100 and i create request for 101, system allows it and post the document.
Vice Versa if i create a Vendor Down Payment request over Commitment iten, then system check the budget and generates message.
any good solution to it would highly be appreciable.
Regards.

Hi,
The budget availability check is done only against the assigned values and
Following entried does not contribute to the Assigned value
    V: Value type not relevant (<> Act./Plan/Stat.Act./Stat.Plan/Commt)
    D: Delivery
    S: Settlement to object with no budget control
    R: Revenue cost element
    C: Cost element is exempt cost element
    M: Minimum from actual + commitment and plan per order value update
    P: Plan value is not on apportioned order / network
    B: Plan Costing Single Position
    S: Funds Commitment in Balance
So the down payment is not covered for the calculation of the assigned value.
Hence no check is carried out for the Availability check.
hope its useful.
Reward points if useful.
Thanks..

Vendor down payment request to MM purchase order

We want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole, so without the line item numbers.
Thanks
Martien
Edited by: M. van den Eshof on Mar 12, 2010 1:10 PM

Dear Martien,
we have had the same problem here at our company. In ECC6.0 we haven't found a solution for this.
We are doing a workaround:
We post the down payment request only on one, the main item in the purchase order. But this causes negative effect on cash management.
If you find a other solution, so please tell me.
Best regards.
Manuel

Down payment request to the purchase order as a whole for f-48

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Actually looking for any screen exit is available for that or any other way.
Regards
RK

Check for FI user exits in this link
http://wiki.sdn.sap.com/wiki/display/ERPFI/UserExitsin+FI
Check also this links
USer Exit / Badi F-47 & F-59
http://wiki.sdn.sap.com/wiki/display/ABAP/Find%2bApplication%2bclass%2bwith%2bExits%2band%2bBadis%2bfor%2ba%2bTransaction
Edited by: Jeyakanthan A on May 25, 2010 1:03 PM

Down payment request to the purchase order as a whole

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Regards
RK

Hi
Actually looking for any screen exit is available for that or any other way
Rgs
RK

Down Payment Request for a Purchase Order Type K

I am making a down payment request to a supplier where the purchase order is of type K.
At the time of recording the payment request (A-47) the transaction meets the cost center of the purchase order and, because of having a message class (KI 281), blocks the release.
The question is:
At present the validation of the message class (OBA5) should validate the account of the purchase order or the supplier's account of the F-47?
Rgs,
Ivair

Hi
KI 281 message says that the GL account has to be created as a cost element. So, please create a cost element for the GL you are using (KA01). Hope this is the problem.
If this does not work, please let me know.
Thanks,

Down payment request based on purchase order

Dear all,
How to make down payment request(F-47) based on purchase order(not line item wise) ?,
Currently in F-47 it is asking to enter amounts purchase
order line item wise,because downpayment is made only for entire purchase order value not line item wise.
How to solve this issue ?
Jeyakanthan

Hi,
This is SAP standard functionality. you have to specify line item, though you specify line item system will check for whole PO. and while posting invoice you will get information of the down payment.
Regards,
Raj

Payment program - down payment request

Hello,
1) Down payment request is saved with the house bank entered
2) Payment is posted in F110 (in the payment proposal house bank is displayed)
3) While displaying payment document house bank field is empty.
Why house bank is not copied from down payment request to payment...
Thanks
Karol

Hi,
House can be maintained at vendor master level only.
Still if you want to see the check information / bank information go to FB03 and enter doc no, comp code, FY and press enter
Go to menu item -> environment->check information.
So here you will get all the data about the house bank and check data.
Hope this will help you for some extent.
Thanks,
Srinu

Summarizing open items in down payment request from SD

Hello!
We have a sales order with a billing plan, let say, 20% down payment, 80% - final invoice. There are 3 items in the sales order. When creating the down payment request the system creates 1 document with 3 customer lines. We would like to have 1 document with only 1 customer line. Is it possible to summarize customer lines on the down payment request?
OSS note 213852 "Analysis of down payment processing with FI" says that summarization is not possible, but the note was issued in 2002. Were there any updates since then?
Thank you!
Edited by: Anna Strokova on Oct 7, 2008 8:58 PM

Hi Goutham,
I think you should have posted this question to PLM forum i.e. Product Lifecycle Management (PLM). Project System is part of PLM .
Down payment request can not be created automatically from the project structure or milestone in projects.Milestones in projects are used for billing purpose.
You can use transaction f-47 to enter down payment request.
Please refer the link below for down payment request.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/01/a9c78f455711d182b40000e829fbfe/frameset.htm
Hope this helps.
Reward points if you find useful.
Regards
Tushar

A/R Down Payment Request and Cash Flow

Hi All,
is there a way to present down payment requests in standard cash flow reports?
Thanks in advance,
Vangelis Kanellopoulos

Hi Vangelis Kanellopoulos,
Down Payment Request is only a Request. Therefore, it is not linked to cash flow yet. If you want the figure to show in cash flow report, you have to make your own user query report.
Thanks,
Gordon

Error in Posting Vendor down Payment request

Hi
I am getting an error in posting vendor downpayment request. I am using the T Code F-47 and special GL indicator F.
Error: Special GL Indicator F is not defined for down payments
Message No F5053
Diagnosis: The specified GL Indicator is not classified as "Down payment" or not listed in the list of the target special GL indicators "F"
System Response: The entry is not accepted
Procedure: Enter an allowed special GL indicator or indicate a change of the default settings
I have checked the settings in FBKP. The GL Accounts and properties have been maintained there. The target GL Indicator A is also maintained in the properties. In OBXT also the GL Indicator has been defined. What could be the error?
Regards
Rahul Sharma

Hi,
What ever the special gl you are created or assigned to K in OBXT are will not allow to post down payment. in FB60 by using these special gl indicators we can post invoice.
Go to OBXR and assign F is for down payment request if it is not there. before assign in OBYR delete the assignment in OBXT. Defaulty the F is used for down payment requests only.
Hope this is clear, if yes assign points, any problem revert me
Regards,
Sankar

Business object for A/R Down payment Request using DI is this exposed .

Hi All,
Requirement: Need to Create A/R Down payment Request using DI.
Table : ODPI
1. Can anyone tell me what is the DI objects for A/R Down Payment Request .
2. When Im directly puting the object as '203'
Application.GetBusinessObject(203)
Error: "The Logged on user does not have permission to use this object"
while I logged on as manager with full permissions
please help me with creating request document.
Regards
Nani

Dear Nani Kumar,
Which B1 version do you use?
The Down payment object exposed from B1 2007 version but not B1 2005.
So you can not use it in B1 2005 and before.
Best Regards
Jane Jing
SAP Business One Forums team

A/P Down payment Request

Similar Messages

Maybe you are looking for