Access Connections does not accept Windows Wireless Config

Hi All,
We are rolling out RADIUS/802.1x wireless lan in our enterprise. The wireless settings are deplyed via AD grouo policy - no problems there.
I have an issue when i configure my access connections (ver 5.21) on my T61 machine. I configure AC to use Windows wireless security settings whcih are picked up correctly. The issues occur when i switch from this profile to another profile for exampls and vice versa. AC seems to think that i need to configure my wlan security settings each time i switch to that profile and wont connect. I get an error message:
The SSID 'WM2009' selected for this profile must be configured in windows. Click OK to configure the wireless settings in Windows'.
I know that the wireless settings are fine, as i can connect with the window wireless client fine - its just AC that has the issue.
Any ideas appreciated!

Domain policy wireless profiles are not compatible with Access Connections.
The problem stems that Domain profiles are stored in a different part of the registry than a locally created WZC profile. Since these are part of the domain policy, they cannot be altered locally. Microsoft wouldn't provide Lenovothe encryption used (for obvious security reasons), so the domain policy based profiles can't be manipulated by Access Connections.
But we do provide an ADM template that can be used to do much the same things.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=ACON-DEPLOY

Similar Messages

Exporting Access Connections profile / Import to Windows Wireless

Hi All.
I have an issue which i really hope someone have a solution for as either googling and searching through 53 pages on this forum has not provided me with an answer. Here goes...
The hospital on which i'm working are about to change their IT-infrastructure and when this migration takes place i will no longer be able to use Access Connections. I have about 30 profiles in AC and all of them with a security key which would be hell to setup again through windows wireless.
Do any of you know of a way to export profiles from AC and then import them to Windows Wireless?
Thanks in advance!

Domain policy wireless profiles are not compatible with Access Connections.
The problem stems that Domain profiles are stored in a different part of the registry than a locally created WZC profile. Since these are part of the domain policy, they cannot be altered locally. Microsoft wouldn't provide Lenovothe encryption used (for obvious security reasons), so the domain policy based profiles can't be manipulated by Access Connections.
But we do provide an ADM template that can be used to do much the same things.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=ACON-DEPLOY

X230 Access Connection does not Displaying

My Notebook is Thinkpad x230 and the Lenovo Access Connection versio is v6.1.
I have similar issues with this link Access Connections (5.84) opens with no window displayed (Win 7) but I cound not find a clear answer.
Please assist Lenovo.
Thanks

Very strange behaviour...
I had one version but it seems doesn't work as you said you can't open even ThinkVantage Tools window (not ThinkVantage Toolbox!) from "Start->"All Programs" menu. Isn't it?
If the OS is apdated too my advice is to delete Lenovo Hotkey Features package firstly as it consists some system tools, then reinstall it using TVSU (note you'll can't use the wireless adapters at this time) and check out the behaviour.
If it'll not help delete all Lenovo applications except of the part of them - Hotkey Features, Rescue&Recovery (did you test it?), ThinkVantage System Update. Then reinstall PM Driver and at least one-two application which didn't work previously.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Access Connections does not display available WiFi Networks

When I click find, Access Connections only shows the network it is connected to, but not all available networks. I removed and reinstalled it and it worked for 1-2 days, but the problem came back. When you manually set up a Location Profile and you click find networks, it find's them, but on the main Access Connections page it doesn't show them.

The latest version of Access Connections 5.50 is available for download here http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73682 and it fixed the problem for me.

Anyconnect NAM, does not disable windows wireless supplicant

I am having some issues with anyconnect nam for wireless. When i install nam with a profile, my wireless works fine, and authenticates as it should, no problem there. I can however not figure out how to get nam to remove the built-in windows supplicant in the tray, which shows me a tray icon, where a user can browse the list of SSID's currently broadcasted, i only want the nam supplicant's own list of ssid's to be shown. Any suggestion on how to accomplish this ?

Jan,
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect31/administration/guide/ac04namconfig.html
Windows Network Status Task Tray Icon
Network Access Manager overrides Windows network management. After installing Network Access Manager, the Windows networking icon in the task bar may confuse users, because the user can no longer use the network status icon to connect to networks.
You can remove the Windows network icon from the task bar by setting 'Remove the networking icon' in a Windows group policy. This setting only affects the tray icon, the user can still create native wireless networks using the Control Panel.
**Share your knowledge. It’s a way to achieve immortality.
--Dalai Lama**
Please Rate if helpful.
Regards
Ed

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
https://app.box.com/s/fe7v7h7kywjr23spumqp

Windows "Easy Connect" does not reply with the password / "Easy Connect is not Available"

Hello,
I have posted a related question some time ago, which was eventually resolved. However, after some time a problem with Easy Connect (used for MSRA) came back:
Whenever I arrive at the point in setting up a MSRA session where Easy Connect is needed, I get the reply: "Easy Connect is not Available". Here is an example of the problem:
Start MSRA
--> as expected, a window with "invite someone to help you" and " Help some who has invited you" appears
Select "invite someone to help you"
--> as expected, a window with "Who do you want to get help from" appears
Select "Invite someone to help you"
--> as expected, a windows with "How do you want to invite your trusted helper?" appears
Select "Use Easy Connect"
--> as expected, the temporary "Create invitation window / checking network capabilities" window appears
Next, I would expect this windows to close a new window to provide me with the Easy Connect password. However, instead I get the window "Easy Connect is not available".
I cannot continue. (I have screenshots so can repost with them if that would clarity my question)
Any suggestion how to resolve would be appreciated.
(Please do not reply with the 3 suggestions from the FAQ (both computers must run windows 7 / Access to internet is limited / your router does not support Easy Connect - doesn't help)
More background information and things I have tried:
The "Easy Connect is not available" window offers the "Tell me more about how to fix this problem" which I have tried, but those suggestions do not help
If I use the other MSRA option: "Help someone who has invited you" (this would be my typical use case), followed by "help someone new" and than select "Use Easy Connect", I also get the "Easy Connect is not available"
window instead of the expected option to enter the Easy Connect password. I believe this is that same problem.
This happed with both the 32 as well as the 64 MSRA versions
I'm using Window 7 Ultimate, 64 bit with all the latest updates
This desktop PC is wired to the internet via an Edimax gigabit switch, a Dlink DIR-855 wireless router and a fiber modem in bridge mode
The W7 desktop has a single active network connection only
I'm using Windows Firewall and Windows Security Essentials
Disabling the firewall on the PC did not help
Network discovery is enabled in Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings (that’s UPnP – right?)
The Internet Connectivity Evaluation Tool does not seem to be available anymore from MSFT sites
Restarting "Peer Name Resolution Protocol" did not help
Restarting "Peer Networking Identity Manager Properties" did not help
Starting up with a "Clean Boot" (disabled all non-Microsoft services using MSConfig) did not help
I would also be interested to understand how I can check on the status of the "Easy Connect" service. Is this a service hosted somewhere, or??
Thanks!

Dear Andy,
Thanks a lot for your reply. Let me answer your questions:
Q: Could you use the other methods: save this invitation as a file and use e-mail to send invitation?
A: yes, that way I can establish a MSRA connection
Q: Have you disable other network connections, including disable all virtual network card?
A: if I check with ‘Device Manager/Network Adapters’ (or Control Panel/Network and Internet/Network Connections) I see two network adapters (my Asus motherboard has two network connectors). Both are available, but only one is used. I have
disabled one. Unfortunately, this does not solve the problem. I will leave it disable for now.
Q: To find detailed information about this issue, please locate to event view and find the logs about remote assistance.
A: I have to admit that the Event Viewer is unfamiliar territory for me. So, I’m not sure where and what to look for. However, as suggested, I found "Event Viewer (local)/Applications and Services Logs/Microsoft/Windows/Remote assistance/Operational".
Each time, I attempt to use MSRA/Easy Connect, it seems two entries are added. As I cannot seem to upload files with this post, here are just the two entries:
“Diagnosis Repro Attempt resulted in a failure.”
“Remote Assistance troubleshooting has confirmed the problem: Remote Assistance Easy Connect isn't available.”
If you need more details, please suggest what to forward or check. I'm eager to find a solution!
W.

After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Window pops up stating"browser error" when trying to access documents using google doc's. Holding shift key and refresh does not clear window. What's next?

Shut down and restarted computer, "browser error" still pops up when trying to access documents using Google doc's.
Holding shift key and clicking refresh does not clear window.
What else can be done to clear the window and gain access to my documents?

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

it is a windows 8

TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

I am not able to access my Ipad as it says that icloud has not been backed up and it does not accept when i click ok

i am not able access my ipad as it says that the icloud has not been backed up. it also does not accept when i click ok.

Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
When it's rebooted you can force a backup via Settings > iCloud

TS1398 my ipod touch won't connect to my wi-fi which is locked,i've tried using the password on the router but it does not accept it,ive phoned talk talk,,,,let's not go there!!!!1

my ipod touch will not connect to my home wi-fi internet which is locked,i've tried using the password on the router but it does not accept it.
i phoned talk talk for advice but unfortunately i would have been as well asking an axe weilding monkey high on cocaine...
appreciate any advice...
thanks.
martin.

thanks for getting back so quickly.when i put password into ipod it comes up with message
"unable to join network"
the router is using AES incription.
my wi-fi is a secured connection WPA2,
i believe i should have WEP or WAP connection for it to work?
i have set up my daughters nintendo 3ds lite to internet no problem using existing connection.
talktalk said they do not support apple ipod touch sytem?
very confusing,particulary as i've bought 3 ipod touch ,,,,mmmmmmm!
thanks again..

HT2305 ITunes does not accept the installation on Windows 7

ITunes does not accept the installation on Windows 7 , I finished downloading itunes setup > run > ..... > next > install > ............................ > rolling back action and no i tunes in my PC , itunes won't help my iphone any more

yes, i know that the iphones are ok. its impossible that all three are damaged...
But i want to know, its itunes fault, or an software from me. I installed the 2 windows 7 computers self (last week complete new). The third is an dell computer with vista 64, dunno what software is on it.
here is an complete list, i installed only essential software:
windows 7 64bit
newest graphic board drivers (pc1: ati, pc2: nvidia)
newest audio drivers (xfi and asus sound sonar)
newest chipset drivers (intel x58 INFallOS_9.1.2.1007PV)
newest intel storage controll drivers (STORallOS_9.6.0.1014PV)
logitech setpoint 6.15 64bit
all windows updates
Firefox
Thunderbird
cdburnerXP
Mumble
Teamspeak 2+3
skype
Video Player (PC1: MPC classic, PC2: VLC)
Audio player (PC1: winamp lite, PC2: aimp)
foxit pdf reader
direct x9
7zip
avast! antivir
and latest itunes 64bit
and some games
i downloaded all software new last week, but it didnt help.

Access Connections does not accept Windows Wireless Config

Similar Messages

Maybe you are looking for