Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
https://app.box.com/s/fe7v7h7kywjr23spumqp

Similar Messages

I have a Iphone and I want to downloa a game but it's over 50MG or MB so it says you must connect to wifi or download from a computer so I downloaded it from the computer and the computer says the downloads done but the app bar is empty and says waiting..

I have a Iphone and I want to downloa a game but it's over 50MB so it says you must connect to wifi or download from a computer so I downloaded it from the computer and the computer says the downloads done but the app bar is empty and says "waiting.."

Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend.

Upgraded to Mavericks, now cannot connect to iCloud, no e-mail!

Just upgraded.
Restarted.
Mac tells me it cannot connect with iCloud because there's a problem with "catsongs at me dot com"...
... except, I don't use catsongs at me dot com for my account...
... I use the dot mac extension
Restarted away... same message...
On the road and now locked out of my MAIL!!!!
Keeps telling me there's a problem with my dot me account in iCloud... but I don't use that account for anying. Signed in via Apple site... it's my dot mac...
Help!
Thanks,
Cat

Just to be clear.
AIM stands for AOL Instant Message. So an AIM Password is an AOL Instant Message password.
An Apple ID issued by Apple (@mac.com and iCloud issued @me.com and @icloud.com ending IDs) can also be valid AIM Screen Names
In the past the password at Apple had to comply with the AIM limit of 16 characters.
I have seen a recent post that suggests that this limit may have changed.
Try logging in here if the Name was registered at AIM or is an @mac.com name
https://settings.aim.com/
(You cannot log in here with an @iCloud.com or @me.com ending ID as there are addtional checks in iChat 6 and upwards that invloved logins to both Apple And AIM at the same time to confirm access to the password).
10:07 pm Saturday; January 11, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Connecting Cisco 2821 Router, Switch, and Cable Modem

Hey everyone,
I am currently in the Cisco Network Academy at my school and just finished CCNA 1. I have a few questions though.
I am purchasing new equipment and that equipment includes:
1-Cisco 2821 2-port Gigabit Router
1-Linksys SE3016 16-Port Gigabit Switch (unmanaged)
1-Cisco WAP4410n Wireless Access Point
1-Motorla SurfBoard Gigabit Cable Modem (no router built in-Just standalone Modem used with Comcast Xfinity High Speed Internet)
1-12U Network Rack (not enclosed)
I am confused on how I will connect the cable modem to the router and the router to the switch and the WAP so that I still have WiFi. Since the router only has 2 Ge Ports, how would I cable this up?
If my assumptions are correct, would I do the following set up?
Take the Cable Modem and run a Straight Thru to Port 1 of the Router.
Connect the Switch Port 1 to Port 2 of the Router using a Straight Thru cable (I believe I will most likely have to Subnet a network, won't I?).
Connect Switch Port 2 to WAP using Straight Thru Cable (so I still have WiFi in my home).
Connect all my computers and other devices to the Switch (this includes several PC's/Laptops, two printers that are ethernet, two TV's that are ethernet, an AppleTV and a Blue Ray Player that are both ethernet, and some Cisco Powerline Network Adapters).
Will that set up work?
Also, how would I configure the router to work with my cable modem AND act as a DHCP Server so that all of my devices get IP Addresses? I have the Cisco Command Guide Book, but it is confusing to me as of now.
Thanks!
Chris

A good start but a few points I would make.
If you set the clock manually, you may find it resets itself after a router reboot. I would look at pointing it at an NTP server:
#ntp server x.x.x.x
#clock timezone GMT (Assuming you are UK based)
Although not required, I would put a description on each of the interfaces as it may help identify them later if you are not physically in front of the Router.
#interface gi0/0
#description WAN
Same for LAN
You have set up your LAN subnet with a /16 subnet mask which is effectively 10.0.0.1 - 10.0.255.254. This is a large subnet allowing over 65k hosts which is not best practice on enterprise networks. It probably won't cause you any issues but I doubt you will have any more than 254 hosts so personally I would use a /24 subnet (255.255.255.0)
The only major thing missing is NAT which needs to be configured on the router to translate the LAN IP addresses from their 10.* private range to the Public IP address on the Gi0/0 WAN Interface.
Firstly you need to define the 'inside' and 'outside' NAT interfaces which is fairly self explanatory:
#interface gi0/0
#ip nat outside
#interface gi0/1
#ip nat inside
Gi0/0 is your outside interface because its facing the Outside world (i.e the internet) and Gi0/1 is your inside interface because its facing Inside your LAN.
Then you need to tell the router which addresses to translate against by first creating an access list:
#ip access-list standard LAN-Addresses
#permit 10.0.0.0 0.0.255.255
Finally you need to tell the router to start translating:
#ip nat inside source list LAN-Addresses interface gi0/0 overload
Oh, I have just noticed that you do not have a 'default route' configured. A router forwards packets by first looking up the destination IP address of the packet (i.e where its going) in it's own routing table. Obviously home routers are not going to have an entry for every Public IP subnet on the internet so they use something called a default route which effectively says 'If I cannot find an entry for this packet in my routing table, use the default route'.
As you are on DHCP and your IP address (and even default gateway) could change on your WAN interface, I would not bother with the next hop address in the default route but rather use the outgoing interface as below:
#ip route 0.0.0.0 0.0.0.0 gi0/0
Hope this helps!

HT1925 I cannot remove or reinstall Quicktime for Windows XP. It keeps looking for Quicktime.msi file. The file is in the folder but it does not think it is the right file. How can I fix this?

Quicktime keeps wanting to upgrade, but it will not finish becasue it cannot find the file quicktime.msi. The file is in the folder where it thinks it is. I have tried to uninstall and reinstall, but because it cannot find the file it stops. I have tried to run Quicktime but it says it is not there. How can I remove it so I can install it again.

It appears it is fixed. FYI. I went to Major Geeks and it said:
Project has been abandoned. You can now use Microsoft FixIt for this problem.
Read more at http://majorgeeks.com/download.php?det=4459#csPejWlRIRpo3bpv.99
Thank You for your help

My MacBook is self-assigning its IP address (and won't let it go)

My MacBook is generally well-behaved, but at times (seemingly random times), it self-assigns an IP address when it should be getting one from a router. The problem is sporadic and occurs in two separate locations - home (where I have control of the wireless router) and school (where I have no control over the router).
Sometimes I come home from school, and I have no problem connecting to my WLAN (2Wire router). Sometimes, however, I get the dreaded "self-assigned IP address" message, and I cannot thereafter get an "un-self-assigned" IP address. I have tried renewing the DHCP lease - no luck. I have tried trashing com.apple.airport.preferences.plist, and although that has worked on occasion, usually it doesn't solve the problem. Even more maddening is that rebooting doesn't help. Nothing consistently solves the problem - and that is so much more annoying than the problem itself!
At school I have this same problem and more. The school network SSID is not broadcast, so AirPort seems not to be able to remember it. Every single time, despite the fact that I've asked it to "remember this network," I have to type in the SSID and WEP in order to join the network. Sometimes it works quickly, and sometimes it won't work for a while, and other times it self-assigns an IP address. (ARGH!) And then I have to try the hit-and-miss "solutions" that work sporadically at home, which work equally unreliably at school.
Can I make it STOP self-assigning an IP address when it thinks it can't get one from the network? Part of the problem seems to be that the AirPort does not to want to give up its IP address after it has self-assigned. Is there an equivalent to the DOS command ipconfig /release that I could type from a terminal window? (It has been a while since I used UNIX.)
There are many things I like about my new Mac (I was a UNIX user in grad school and then had to use a PC at work, so I am a newbie to Mac OS), but this problem is totally unacceptable for a computer that is supposed to be so much better than a Windows-based machine. At least in Windows I knew how to troubleshoot problems - here I am completely helpless! And I CANNOT believe Apple has not fixed this, because from what I can tell by looking on the web (when I can actually get a real IP address), people have had the problem for at least FOUR YEARS!!!!!!
Please help - I am desperate! Thank you in advance.

Have you tried making a New Location for each yet? The Automatic one get confused easily.
Some "nix" to try when it happens also...
sudo ipconfig set en1 BOOTP;sudo ipconfig set en1 DHCP
sudo ifconfig en1 down;sudo ifconfig en1 up
Sometimes having an all OFF Location can help, thanks to Gnarlodious...
http://gnarlodious.com/Computer/MacOsx/WiFi

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

The way I resolved this issue was to create a dual boot Mac, so that I am able to boot from either Mountain Lion or Mavericks. Running Vectorworks in a virtual machine just didn’t cut it.
I had already upgraded to Mavericks, which meant that trying to install OS 10.8.5 as a second operating system produced the error message saying it cannot be installed on this computer.
First, if you need a copy of Mountain Lion installer and you has previously purchased it, open the App Store app, press the option key and then click on the purchases tab. You will see a list of all downloaded software from Apple and you can download OS 10.8.5 again without paying for it a second time. If you had previously created a boot disk of Mountain Lion, which I had not, you can obviously skip this step and the next.
You will need a boot disk for Mountain Lion. After downloading the Mountain Lion installer, the easiest way to create a boot disk is to use a slick little app called DiskMaker X, which you can get here: http://liondiskmaker.com Next you will need a USB flash drive of at least 8GB in size. Install and run DiskMaker X, plug in your flash drive, and follow the prompts. In just a few clicks, your boot drive will be easily created.
Next, you will need to add a partition on your startup drive on which you will install Mountain Lion. Here is the procedure for creating the new partition: http://macs.about.com/od/applications/ss/diskutilitysize.htm You can find this at Apple support, but this site gives you additional procedures that may be helpful. I set my new partition at 50 GB, but you can do with less is you don’t have the space.
With those two operations done, and your OS 10.8.5 boot drive plugged in, restart you Mac and press the option key after you hear the chime. You will be asked which drive you wish to start from- select the boot drive. After your Mac boots up, you will see several options- choose install Mountain Lion (actually I think the option is reinstall Mountain Lion).
After completing the OS install, install your copy of Vectorworks, copy and move whatever files you need to from Mavericks, and you are in business. To boot from either OS, simply press the option key and select OS 10.8.5 when you need to work in Vectorkorks, or OS 10.9 for all your other tasks. Switching back and forth isn’t as advantageous as otherwise, but it is the best way to run Vectorworks without upgrading for the $1,500 or so that would be required otherwise.

Since upgrading to Maverick I cannot send/share photos through iPhoto. Dropbox says "not connected to server". All other online email activities work just fine.

Since upgrading to Maverick I cannot send photos while in iPhoto. Dropbox says I am not connected to server.
All other internet email activities work just fine.

And again why do you think Dropbox is involved in any way? There is no connection of any sort between iPhoto and Dropbox
THis sounds like you either need to (my personal suggestion) change your email client to Mail in the iPhoto preferenceemail if you want to use the iPhoto client under the accounts tab delete your account and re-enter it
Ln

After I upgrade to maverick I cannot longer use my scanner (Epson Aculaser cx17). Now it works only as printer

After I upgrade to maverick I cannot longer use my scanner (Epson Aculaser cx17). Now it works only as printer. Does some one else have a similar problem?
With Lion worked very well.

The scanner is not amongst the scanners Apple supports on 10.6 through 10.9:
OS X: Printer and scanner software available for download
Now it could use another scanner's engine, thus supporting the driver. It could also support the TWAIN preference in Preview application.
It could also show up in Apple menu -> System Preferences -> Print and Scan.
If none of that helps, look at my FAQ*:
http://www.macmaps.com/macosxnative.html#SCANNER
for third party scanner drivers.
* Links to my pages may give me compensation.

Why does my computer self-assign an IP address whenever I rest the network?

All of a sudden both my wife's and my MacBook Pro dropped their internet connections (Verizon FIOS). I spent a long time with the Verizon tech person and he suggested that I post here.
My computer is running Mountain Lion and my wife's is running Lion.
Thanks.
Jon

Rest the network? Why would you do that? It's not like it builds up lactic acid. Actually turning electrical devices on/off can actually degrade performance/reliability over time.
When MacOS loses connection with the network it will self-assign an IP address.. see above. Turn the network back on, and I suspect it reconnects. No?
If you recently upgraded to M/L I suggest you go into System Preferences/Network, delete the Wifi service ("-") and then recreate it ("+"). Do the same with the Ethernet service connection. Also, use WPA2 for router/network security.
Then repair permissions.
BTW, I use Verizon FIOS and experience no problems.

After upgrading to mavericks i cannot log into my VPN using RDC

After upgrading to mavericks i cannot log into my desktop at work using Remote Desktop Connection for Mac
I get a message that The computer i am triyng to connect to cannot establish my identity
What to do?

You don't need to go to the App Store to for support for Steam and Minecraft. You need to go to their website(s).
You're welcome

Since I upgraded to Mavericks I cannot play .AVI files in Aperture

Hi, I have about 1 Tera of .AVI videos as referenced files to Aperture libraries that I have spent long time organizing, tagging, and keywording... Since I upgraded to Mavericks I cannot play these videos any longer. I can play them with VLC or DivX but not within Aperture. Is there any way to ask Aperture to use VLC to play the videos? Or to get Quicktime to play them within Aperture? I assume I am not the only one with this problem but haven't found any way to solve it.
Thanks a lot for any hint!

Hi, I have about 1 Tera of .AVI videos as referenced files to Aperture libraries that I have spent long time organizing, tagging, and keywording..
It is probably not a question of avi or mov. AVI is just a container for media with a variaty of codecs. It will depend on the codecs you installed, if Aperture will be able to show these.
What is your Aperture version? Have you upgraded to Aperture 3.5.1? My Aperture version has no problems to show my AVIs. I installed Perian 1.2.3 to have more codecs.

Upgraded to Mavericks now iTunes screen is a negative. Background is black and titles etc. are white. How do I reverse it?

Upgraded to Mavericks now iTunes screen is a negative. Background is black and titles etc. are white. How do I reverse it?

Hello Tarpon471,
It sounds like your desktop is otherwise colored normally, but the colors in iTunes are inverted. I was thinking it is possible that a 3rd party plugin may be causing an issue with iTunes since the upgrade to Mavericks.
Try the troubleshooting in this article named:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/ts3430
Thank you for using Apple Support Communities.
Regards,
Sterling

Since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

Hopefully this is what you are looking for:
Canon MP560 series:
Status: Idle
Print Server: Local
Driver Version: 10.84.2.0
Default: Yes
Shared: Yes
URI: usb://Canon/MP560%20series?serial=254057
PPD: Canon MP560 series
PPD File Version: 10.84.2.0
PostScript Version: (3010.000) 705
CUPS Version: 1.7.2 (cups-372.4)
Scanning support: Yes
Scanning app (bundleID path): -
Scanning app version: -
Scanner UUID: 00000000-0000-0000-0000-323534303537
Printer Commands: PrintSelfTestPage ReportLevels
CUPS filters:
Raster2CanonIJ:
Path: /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
Hope

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

Similar Messages

Maybe you are looking for