After effcts "up to date" but i want to upgrade to 14.1
i want to update to 13.1
but it says "up to date"
Run the cleaner tool and try again.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium
Similar Messages
-
For iphone users with att, can you block incoming texts all together? After paying $20 for data i dont want to pay as i go/pay more for texts
SMS is exchanged over the same network as calls - no data involved.
MMS requires data.
iMessage requires the same as email - internet access via an available wi-fi network or via your carrier's cellular data network.
You can disable SMS/MMS altogther with your account by requesting this with AT&T. You can turn iMessage off unless your iPhone is connected to an available wi-fi network. -
i recently got a new laptop so my itunes library is empty but i want to upgrade my ipod without losing my music. how can i do this? please someone HELP!!!
but i got music from my old laptop and my little brothers laptop so basically its no way i can take whats already on my ipod and put it on my computer and drag and drop it to my new itunes library
-
I have an older Airport Extreme (disc shaped) that we use with my wife's PowerBook (OS 10.5.8) and my MacBook Pro (OS 10.9.4). We currently only have Airport Utility on her Mac, but I want to upgrade the utility so I can use it on mine. Which version of the utility will work on my MacBook, and still control the older Airport Extreme?
if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses. -
I've signed up for a Students Single App Plan but I want to upgrade to a Students Complete plan, can/how should I go about this?
It prompts me to upgrade to the complete plan, but not the complete students plan.I think you need Adobe contact information - http://helpx.adobe.com/contact.html
-
Hi, i have an Air but want to upgrade to the new model. How do i wipe the memory clean of my existing Air so i can sell it, and ensure when i get my new PC it automatically assumes the existing settings? Any help appreciated...
First of all, as a rule you should have two backups before you do anything else. (most don't, and it's up to you).
I would have one backup done as a Time Machine backup on an external disk, which you will use to import all settings, data and apps to your new MBA via Setup Assistant on your very first boot of the new machine.
Second, I would have prepared, a bootable backup done via Carbon Copy Cloner or Super Duper on a second external disk. This you can use for unforseen problems that might be evident on the Time Machine backup (hey it happens).
After you have these two items in preparation, then use the original system disk or flash drive to reformat and reinstall the original operating system to the old machine, cleanly. After that, it is ready for sale. If the unit is not an SSD equipped MBA, you can perform a secure wiping of the disk when you perform the reformatting.
To reiterate.... You need a good Time Machine Backup as a source for you setting up the new Mac with Setup Assistant. -
What if I already have version 10.6.4 but I want to upgrade to Ap3?
I was reading the posts from the many people who have had problems with Ap3 and then upgraded to 10.6.4. I have the opposite situation: I have 10.6.4 but want to upgrade to Ap3. Has anyone experienced any problems with this upgrade?
Yes, lots of issues when upgrade to Ap3. Most can be avoided
It takes a long time and some times days to finish the install. Leave it on and don't use it until it is finished. This could save you lots of problems. Turn Faces off if you don't need the feature as this looks at every image and scans it to identify faces.
iMac, do you have 4GB RAM as this is about a minimum for reliable operation of Ap3 at a half serious work load level.
The install will need to use a lot of your hard drive space for a period. You get this back when it is finished.
When it is done Check for Aperture Updates especially if the upgrade is from Disc. Allan -
I don't want to upgrade to ios7 on iPhone 4. But instead want to upgrade to ios6. How can I do that?
I have an iPhone 4 with iOS 5.1. I want to upgrade it to iOS 6. How can I do that when iOS 7 is available in the market. I fear upgrading to ios 7 will make my phone pretty slow. Gene I want to upgrade to iOS 6. Pls advise
You cannot. As long as your device is qualified to run the most recent iOS, that's the iOS that will be installed on your device. If you are currently at iOS 5.1, the update that will be installed is iOS 7.0.3. The update process will skip iOS 6.x.x since it is no longer valid for your device.
-
My original ipad is running iOS 5 but I need 6 or7 to run an app I want to install. Software update is telling me that it is up to date and does not offer 6 or 7
Click here and follow the instructions. If you can't get a compatible application version, you need a newer device.
(98389) -
How do I update to ios 6 on my iPad 2?
I am running iOS 5 and it tells me that it is up-to-date. I need iOS 6 to run afew apps that I would like to use.Are you sure it isn't an 1st generation iPad?
If you have an iPad 2 you should be able to run iOS 6.1.3.
http://support.apple.com/kb/ht4623 -
HT4623 Mine say its up to date , but I want to update it to the iOS 7
I need help to UPDATE MY IPAD TO THE iOS 7
I suspect you have a 4G iPod. Those can onlu go as hig as 6.1.3
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB -
Thinkpad E550 - great machine but I want to upgrade to a 250GB SSD
Have a new E550 and it's a great choice. The E550 has an optional upgrade from the factory of having a 128GB SDD, either a Sandisk or a Samsung PM851. But I need a 250GB SSD so I plan to buy one and transfer the system across to the new drive. I'll use the current 500GB HDD for backup.
I plan to purchase a 250GB Samsung 850 EVO. The question is what is the best way to go about transfering everything across to the new drive? I have heard that the Samsung software that comes with the EVO does not always work well. I also understand that the existing restore partition wont work once transfered across to the SSD, so I am wondering what I do about that? Anyone got this to work already, or have any tips?
I figure that an alternative would be to do a fresh install of windows 8.1 on the new drive, but I'm not sure where my Windows licence key can be found? Thankshttp://www.howtogeek.com/97242/how-to-migrate-windows-7-to-a-solid-state-drive/ Samsung's SSDs 840, 850, PRO, are blacklisted due to sever TRIM bug deleteing data : http://www.digitaltrends.com/computing/samsung-ssd-bug-wiping-data/ https://blog.algolia.com/when-solid-state-drives-are-not-that-solid/
-
this is in connection of my question regarding the ram 12gb 1600 plus 8gb 1600 and the result was 12gn but 1333 ghz speed.. Confused?
my mac book pro was new one, just bought only bu i want to uprade to 16 gb but becoz of 8gb is expensive each. I bought only 8gb first and utilize my 4gb ram.. pls help...Please keep all post on this topic in your original thread.
Thanks -
i need help please post some answers
I really don't need to say more than what Niell has stated but just to explain it a little further, Snow Leopard is a new Mac OS for your Mac - not a software update from Leopard 10.5.8. That is why you will not see it as an update. It is an upgrade.
Software update does exactly that - it searches and finds updates for the software on your Mac. It will not find new software upgrade for you. -
Hundreds of clients still use CS2, but we want to upgrade--what to do?
I know InDesign backwards compatibility and version conversion (or lack thereof) can be a contentious subject, and I know it's been discussed here at great length (http://forums.adobe.com/thread/641138?start=0&tstart=0), but I thought it might be worth a try to present my production department's dilemma. What to do when InDesign CS2 is getting more and more buggy on our Macs, but moving to CS5 would make our files unusable for most of our clients?
We've been putting off dealing with this issue as long as we could, but it's becoming more and more urgent as Adobe releases new CS versions.
The details:
I'm the production manager/art director for a small inhouse art department. We have 5 art department Macs and 7 editorial department Macs running CS2 (InDesign, Illustrator and PhotoShop) in 10.5 or 10.4, depending on the Mac.
Our company sell and distribute editable InDesign CS2 files (puzzles, graphics and so forth) to hundreds of clients around the world, most of whom are newspapers.
It'd be really nice if they'd upgrade, but newspapers are cutting their budgets and laying off staff left and right, and they're certainly not about to upgrade if they can avoid it. Seriously: a large percentage of them are still using Quark 4 in Mac Classic, which we can't support, so they have to recreate the puzzles from scratch using text and eps files. (The puzzles we still distribute as Quark files we have to create in 6.5 and backsave to 5, though I realize there is software out there from Marksware that could solve this problem.)
I'd love to just give them PDFs... But these files need to be editable so that the newspapers can change them to match their own fonts and styles, or edit them to fit, or translate them into other languages. (We create them with generic fonts such as Helvetica and Times that all newspapers are bound to already own, since we can't distribute fonts along with the files).
Meanwhile, as our own computers get upgraded or replaced, InDesign CS2 is causing more and more issues--it crashes all the time, doesn't work right in Snow Leopard (we had to downgrade back to regular Leopard), and of course won't open files created in later versions, since someone with CS5 or CS4 can't backsave to CS2.
So what are the possible solutions? Has anyone else dealt with this? What have you done? Some things I've considered:
Trying to create editable PDFs... but many of the clients we have are not particularly tech-savvy, and I have to admit I'm not sure how to do this in an efficient and user-friendly way.
Buying CS5 for just department, and digging through eBay and other channels to buy just enough copies of CS3 and CS4 to use as a bridge back to CS2. But this just seems like such a clunky and inefficient solution that would significantly slow down all those nice production workflows I spent so much time streamlining.
Letting clients know that the oldest version we could support is CS3. But that still leaves the problem that we'd have to get a bunch of copies of CS4, which is no longer the latest!
Sigh... this is driving me nuts! Any suggestions are appreciated!Thank you all for your responses! Peter, you're correct that I did already pretty much know the answer, but I was hoping there was just some trick or solution out there that we hadn't thought of that other InDesign users had come across.
We are indeed trying to hold on to and maintain some older Macs for using CS2, and even have a Mac still running Classic for Quark 4 (oh, and Pagemaker--my goodness, I forgot about all our Pagemaker documents!). And I'll talk to the folks here about setting up a more robust long-term technology plan.
Bob, you are also correct that in hindsight my company probably should have bought each version as it came out, and maybe we will do that going forward.
But I have to say I'm still frustrated that no third-party conversion app exists, especially since the files we create for distribution are quite simple -- they don't use any of the advanced features of the software at all. Oh well!
Maybe you are looking for
-
How to clear the picture from custom container
Hi All I am uploading the employee image into custom container . for that i have used the below fn modules CALL FUNCTION 'HR_IMAGE_EXISTS' EXPORTING p_pernr = pernr * P_TCLAS = 'A' * P_BEGDA = '18000101' * P_ENDDA = '99991231' IMPORTING * P_EXISTS =
-
Just bought a 20" and after setting up I find that the puter won't eject discs. So... I go through the troubleshooting and guess what? The disc reader-writer isn't lined up with the slot... The housing and the hole are not lined up, so , when I try t
-
This is a head's up to anyone looking for Video converters. I had the misfortune of downloading the latest free Miro Video Converter. I was horrified by all the garbage software it attempted to install on my system. Nevertheless, I used the Advanced
-
Mountain Lion ATI driver missing in MacBook Pro
The ATI driver is missing with the new update for my 2011 MacBookPro. Where I can find the driver?
-
How can I run scripts in CP 8 on a timely bases.
In CP 8 I want a script to run every second automaticaly, how can I do this? The reason for this is that I want the application that I build to check for the GeoLocation every second, so that the arrival at a location that is entered as a variable c