Agentry Transmit Configuration - address and port
Hi experts,
I'm trying to setup a new Transmit configuration in the Agentry SDK for SMP 3.0 and I have a question - why the "Server Address Settings" for Address and Port are grayed out and set to Default?
Am I missing something in the configuration or there is a new logic? What if I have to go through a firewall and reverse proxy with a specific address and port?
Regards,
Denis
Hi Steve,
Thanks for the reply! So, from now on, the address and port will be only configurable on the Agentry client? I guess it will be enough just to configure it once in the beginning for each user and then only login in the client will be sufficient?
Regards,
Denis
Similar Messages
-
Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
at coherence::component::util::Initiator::openConnection
at coherence::component::net::extend::PofConnection::open
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::io::IOException: socket disconnect
at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
at coherence::net::Socket::readInternal
at coherence::net::Socket::SocketInput::read
at coherence::io::BufferedInputStream::fillBuffer
at coherence::io::BufferedInputStream::read
at coherence::component::util::TcpInitiator::readMessageLength
at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
at coherence::component::util::Daemon::run
at coherence::lang::Thread::run
on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
<protocol>Tls</protocol>
<local-certificates>
<certificate>
<url>c:\Cert\</url>
<password>password</password>
<flags>DefaultKeySet</flags>
</certificate>
</local-certificates>
</ssl>
thanks
Bala -
Changing the multicast Address and Port giving error
I am using Coherence 3.3.1 jar files (Coherence.jar and tangosol.jar) in my local application. But when I try to change the multicast Address and Port in tangosole-coherence.xml(in Coherence.jar) then it is giving this error -
"This member could not join the cluster because of an incompatibility between the cluster protocol used by this member and the one being used by the rest of the cluster. This is most likely caused by a Coherence version mismatch, or by mismatched protocol filters (e.g. compression, or encryption)"
If i am using unique IP and Port then how can it be in a Cluster as this error stating. Please reply ASAP.Hi,
There is a good chance that there is already the IP and port is being used by another cluster (which uses different versions of jars or configurations) and hence, when you are starting your cluster, throwing the error.
Can you double check if another cluster is already using it or not ?
Thanks,
Amit -
Changing IP Address and ports in Directory Server 5.1 SP 4 and 5.2 SP4
I have installed multiple instance of Sun Directory Server 5.1 and 5.2 on ports 389 and 390,now I want to change the IP Address and ports, I am able to change the directory server port from 389 by editing the dse.ldif file, now I want to change the port 390 and the IP address same as directory server, can someone expert from the forum guide me.
Thanks in Advance.
Mukesh Kumar1) I don't know what you've typed in when installing... but I've never seen that message. Are you using any language specific characters ?
Do you get the error after this screen ?
<b>
The suffix is the root of your directory tree. You may have more than
one suffix.
Suffix [dc=sun,dc=com]:
</b>
If yes, then this means that the value you typed in is not a valid DN... and you must enter a valid one.
2)The Directory Server is installed under /usr/iplanet but the database is under /var/iplanet/ds5 and configuration is under /etc/iplanet/ds5 ...
You can use symbolic links if you want to move things around.
3) You mean you downloaded the tar.gx file of iDS 5.1 and install it on Solaris 9... No problem, I do this every day. As long as you have right to create directories and files, you should be able to install as anyone. If not, you should install as root and then let the server run as a special user.
4) Solaris 9 comes with iDS5.1 packages already installed. But the server is not configured at all.
Running directoryserver setup allows you to configure it and create the database, accounts...
Running directoryserver uninstall remove the instance of the installed database... It doesn't remove the packages. You can start again a setup...
By the way, I think that iDS 5.1 on Solaris 9 comes with the full documentation... May be you should start by reading it.
Regards,
Ludovic. -
WLS9: address and port of a starting member?
Hi
I have a cluster running on different solaris 10 machines.
Each machine has different virtual interfaces:
myHostName1en1,myHostName1en2, myHostName2en1, etc... where myHostName#en0 is the standard network interface.
Cluster's members are always binded on an interface different from the standard one.
We restrict access to the admin server via connection filter so that only the addresses and ports of the members can access it. The problem is that a starting member (like every java process) makes its outgoing call from the standard interface(myHostName#en0).
Is there a way to tell the members that they should open the outgoing connection on a specifical interface and port via system properties?
Thank you in advance for your answer
Best RegardsCarlo de Rossi <> writes:
This is supported in WLS 9. Once bootstrapped the default listen
address should be used for outbound calls (or admin channel address if
configured). In order to route bootstrap calls over this address you
need to set the property -Dweblogic.admin.ListenAddress=<address> on
the command line of the booting server, where <address> is the address
you want to bind to outbound and should correspond to the regular
listen address when booted. You may also need to enable the admin port
/ admin channel for this to work.
andy
> Hi
> I have a cluster running on different solaris 10 machines.
> Each machine has different virtual interfaces:
> myHostName1en1,myHostName1en2, myHostName2en1, etc... where myHostName#en0 is the standard network interface.
> Cluster's members are always binded on an interface different from the standard one.
> We restrict access to the admin server via connection filter so that only the addresses and ports of the members can access it. The problem is that a starting member (like every java process) makes its outgoing call from the standard interface(myHostName#en0).
> Is there a way to tell the members that they should open the outgoing connection on a specifical interface and port via system properties?
> Thank you in advance for your answer
> Best Regards -
How to determine which IP address and port is used to make DNS queries?
I am using JNDI/DNS API to query a Enum server (Tel URI resolution in VOIP world) what is a DNS server.
But I have many network interfaces, in a VLAN environment, and I must to specify from which interface (and port)
all the requests are sent.
When I read the code of JNDI/DNS API (in JDK 1.5) and specially the DNSClient class, I can see that the
DatagramSocket is created without parameters... : udpSocket = new DatagramSocket();
How can I specify the IP address and port to use for my client???
Thanks for your help.I must to specify from which interface (and port) all the requests are sent. You don't have to specify the interface unless your static unicast routing tables are incorrect, and you never have to specify the port unless some lunatic is in control of your firewall.
-
Essbase1113 IP Address and Port Questions
hello,
everyone, i'm puzzled on a question about essbase.
it'll be so kind if you give me some suggestions.
in our project, we install EMP System 1113 on Win Server2003, but it's in local network. there is no problem when we connect it using client tools in local network environment.
however, we wanna connect the Essbase Server through Internet, we map the server address (such as 10.163.163.163) as an Internet address (such as 111.111.111.111).
we didn't use VPN such tools, and, the address is just a mapping, if we don't map the port, we couldn't connect the essbase server.
here comes the question, how do we map the essbase address and port ? i mean which port should we use, so that we could connect it through Internet ?
thank you so much.
wish to reply.
hawk.The ports that essbase use are outlined at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install_start_here/ch06s05s01.html
Cheers
John
http://john-goodwin.blogspot.com/ -
To know IP address and port no using DB Link
Hi -
Is it possiable to know the IP address and port no of other oracle database that are connected with DB link. i.e for example
we have 2 oracle databases(For example A and B and it's schemas are A_A and B_B) on two different IP address and DB link is created on B database i.e using B_B user to access A database i.e A_A user. Now By using A database i.e A_A user can we know the IP and PORT NO of database B?user4587979 wrote:
Hi -
Is it possiable to know the IP address and port no of other oracle database that are connected with DB link. i.e for example
we have 2 oracle databases(For example A and B and it's schemas are A_A and B_B) on two different IP address and DB link is created on B database i.e using B_B user to access A database i.e A_A user. Now By using A database i.e A_A user can we know the IP and PORT NO of database B?you can also know the ip address and port number by tnsping command.
$tnsping B
eg:-
C:\Documents and Settings\rajesh-kg>tnsping TESTDB
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-JUN-2
011 18:44:48
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oracle\product\10.2.0\db_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxxxxxxx)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SER
VICE_NAME = testdb)))
OK (50 msec) -
Change/Configure Host and Port for the Web Service Proxy with Server
Hi,
Is there a way to configure Host and Port in generated proxy for Web service depending upon server. (ADF 11g)
Scenario:
We are consuming Credit Card web service from a service provider and have different Host and Port details for development, QA and Prod.
So we created proxy classes using wsdl for development and things work fine, but when deploying code to QA or Prod we need to change the Host
and Port details.
Is their a way we could user variable's for Host and Port which looks to some configuration file to evaluate their values
based on server.
I am a bit new to this web service .. will appreciate if someone could provide an example.
Thanks.Are you using Web Service Proxy or Web Service Data Control?
If you are using Web Service Proxy. Right click on your Proxy --> Properties --> Port Endpoints. Here you can change the IP & Port details for each port.
Venkat -
Passing data to IP address and PORT???
Hi,
I am trying to do a scenario, where in I need to make a synchronous call to a IP address and Port.
The scenarion is
SAP--> XI --> IP address/Port.
Has anyone done this scenario, wherin you pass the string of data to a IP address and port?
RegardsThe scenario is RFC --> SAP XI --> IP address/port.
We have to give the bank related data to an IP address and a port for which we have to do a socket level programming.
Its a synchronous call.
We are thinking of using JAVA proxies for the same. But the receiver side JAVA proxies have to sit on XI server?
Can we have receiver side proxies on SAP XI server and make a call to IP address and Port?
Can the .ear file be deployed on the XI server??
Thanks -
How to extract Weblogic Listen Address and port.
Hi All,
I want to extract Weblogic Admin server's Listen address and port via Java to perform some admin actions.
Can someone please help on this.
Thanks,
GJHi,
Try this code.
import java.io.IOException;
import java.net.MalformedURLException;
import java.util.Hashtable;
import javax.management.MBeanServerConnection;
import javax.management.MalformedObjectNameException;
import javax.management.ObjectName;
import javax.management.remote.JMXConnector;
import javax.management.remote.JMXConnectorFactory;
import javax.management.remote.JMXServiceURL;
import javax.naming.Context;
import java.lang.*;
public class ServerDetails
private static MBeanServerConnection connection;
private static JMXConnector connector;
private static final ObjectName service;
static
try {
service=new ObjectName("com.bea:Name=DomainRuntimeService,Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean");
catch (MalformedObjectNameException e)
throw new AssertionError(e.getMessage());
public static void initConnection(String hostname, String portString,String username, String password) throws IOException,MalformedURLException
System.out.println("ServerDetails---Started in initConnection");
String protocol="t3";
Integer portInteger=Integer.valueOf(portString);
int port=portInteger.intValue();
String jndiroot="/jndi/";
String mserver="weblogic.management.mbeanservers.domainruntime";
JMXServiceURL serviceURL=new JMXServiceURL(protocol, hostname,port, jndiroot + mserver);
Hashtable h=new Hashtable();
h.put(Context.SECURITY_PRINCIPAL, username);
h.put(Context.SECURITY_CREDENTIALS, password);
h.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,"weblogic.management.remote");
connector=JMXConnectorFactory.connect(serviceURL, h);
connection=connector.getMBeanServerConnection();
public static ObjectName[] getServerRuntimes() throws Exception
return (ObjectName[]) connection.getAttribute(service,"ServerRuntimes");
public void printServerDetails() throws Exception
ObjectName[] serverRT=getServerRuntimes();
for (int i=0;i < serverRT.length;i++)
String name=(String)connection.getAttribute(serverRT,"Name");
String listenAddress=(String)connection.getAttribute(serverRT[i],"ListenAddress");
Integer listenPort=(Integer)connection.getAttribute(serverRT[i],"ListenPort");
System.out.println("Server Name : " + name +"\t Address: "+listenAddress+"\t Port: "+listenPort);
public static void main(String[] args) throws Exception
System.out.println("ServerDetails---Started");
String hostname=args[0];
String portString=args[1];
String username=args[2];
String password=args[3];
System.out.println("Hostname : " + hostname);
System.out.println("PortString : " + portString);
System.out.println("Username : " + username);
System.out.println("Password : " + password);
ServerDetails sd=new ServerDetails();
initConnection(hostname, portString, username, password);
sd.printServerDetails();
connector.close();
Regards,
Kal -
API method to query multicast address and port of a cluster
I am new to Tangosol and I'm looking to write a quick Java dashboard that will display current information on our cluster, such as the clustername and the multicast address and port that is being used. Looking at the API I've found the Cluster object and I'm able to get the memeberset and the clustername.But I have not been able to find a way to query the multicast address and port being used by the cluster.
Any help or links would be appreciated.
Thanks,
LenHi Len,
All this information could be retrieved via JMX. Please see this Wiki page. Detailed documentation about the semantics of all exposed attributes and method could be found in the Javadoc for the <a href ="http://tinyurl.com/r75sy">Registry interface</a>.
Regards,
Gene -
I want to be able to upgrade my Firefox installations that are located behind a Cisco PIX Firewall. What are the TCP/IP addresses and ports required to be opened for updating to occur?
This is less likely to be a firefox problem, as it appears something bad has happened to your network. Can you access the internet with other programs? Try email/ IRC/ Skype or even updating your computer.
What operating system are you using?
Ian. -
Configuration for LDAP IP Address and Port for Exchange 2010
Let's say Exchange 2010 is installed on a computer that is joined to a domain. However, I would like to redirect LDAP authentication to another IP address and another port like how sharepoint implement it below
http://sharepoint.stackexchange.com/questions/33540/ldap-authentication-connection-string
Is it possible to do the equivalent for Exchange 2010?
Note: I would like to do this without installing any Edge Transport server or Microsoft Forefront TMGThe question I would need to ask is "Why would you need to do this?" I ask because Exchange requires an Active Directory account for authentication. That account may have permissions from some other directory (as in a linked mailbox),
but the account is used to find it. For SharePoint, you can authenticate to other directories directly. -
I need to programmatically find these 3 variables to use.
1 How do you programmatically find a port number (com port) to use?
2 How do you find the IP address programmatically? (i.e. Java's equivalent of DOS' ipconfig command)
3 How do you find the name of the mail server?
Any help much appreciated.
Agent!I need to programmatically find these 3 variables to
use.
1 How do you programmatically find a port number (com
port) to use?Use? Use how?
If you want to set up a server then you usually assign it to a port. If that port isn't available then the server fails. If you don't do that then the clients will never find you.
For something unusual you would just start at X (I like 50000) and increment as each fails.
>
2 How do you find the IP address programmatically?
(i.e. Java's equivalent of DOS' ipconfig command) Just a guess but when I looked at the java docs I found the following...
InetAddress.getLocalHost()
InetAddress.getHostAddress()
>
3 How do you find the name of the mail server?
"The" mail server? I have two mail servers so what how does that work?
DHCP usually configures a IP address and a DNS Server. It can configure a mail server. But it doesn't have to. If so you would have use OS specific stuff to find it - like ipconfig.
Usually when someone sets up a mail client they must explicitly type in the mail server. And that is how most applications that need mail work as well.
Maybe you are looking for
-
I installed apache from the official repos and followed the instructions in the wiki for configuring it. I checked to make sure the http user exists, and I /etc/hosts looks good (to me). Upon boot, the daemon fails to start and I can't load local web
-
I have recived a new computer for christmas and dowloaded the new itunes on it but when i hook my iphone 4 up to the new computer with the new itunes it will only show up on the new devices the music i have on it will not show up in the new itunes li
-
Sharepoint web application is not working on client system
my sharepoint we application is working on premises but it is not working on local system
-
Hi, new ipad2 user. Recieve some emails that should have images but in their place are question marks. any advice on how to fix this would be great. thanks alot..brad
-
Formatting header rows in data form in hyperion planning
Hello Friends, I want to format header rows in data form in hyperion planning (formatting like Bold, Italic etc...) Is there any way to do that?