Configuration for LDAP IP Address and Port for Exchange 2010

Let's say Exchange 2010 is installed on a computer that is joined to a domain. However, I would like to redirect LDAP authentication to another IP address and another port like how sharepoint implement it below
http://sharepoint.stackexchange.com/questions/33540/ldap-authentication-connection-string
Is it possible to do the equivalent for Exchange 2010?
Note: I would like to do this without installing any Edge Transport server or Microsoft Forefront TMG

The question I would need to ask is "Why would you need to do this?" I ask because Exchange requires an Active Directory account for authentication. That account may have permissions from some other directory (as in a linked mailbox),
but the account is used to find it. For SharePoint, you can authenticate to other directories directly.

Similar Messages

Coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpA

Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
    at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
    at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
    at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
    at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
    at coherence::component::util::Initiator::openConnection
    at coherence::component::net::extend::PofConnection::open
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::io::IOException: socket disconnect
    at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
    at coherence::net::Socket::readInternal
    at coherence::net::Socket::SocketInput::read
    at coherence::io::BufferedInputStream::fillBuffer
    at coherence::io::BufferedInputStream::read
    at coherence::component::util::TcpInitiator::readMessageLength
    at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
    at coherence::component::util::Daemon::run
    at coherence::lang::Thread::run
    on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"

We are facing same issue.    Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
              <protocol>Tls</protocol>
              <local-certificates>
                <certificate>
                  <url>c:\Cert\</url>
                  <password>password</password>
                  <flags>DefaultKeySet</flags>
                </certificate>
              </local-certificates>
            </ssl>
thanks
Bala

I seem have two apple IDs - on for an icloud address and one for everything prior.

I seem have two apple IDs - one for my new icloud email address and one for ipad/purchases which has been active for 6 months.
Can I change this to simplify it, or should I follow instructions to ensure everything is matched?

I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

Agentry Transmit Configuration - address and port

Hi experts,
I'm trying to setup a new Transmit configuration in the Agentry SDK for SMP 3.0 and I have a question - why the "Server Address Settings" for Address and Port are grayed out and set to Default?
Am I missing something in the configuration or there is a new logic? What if I have to go through a firewall and reverse proxy with a specific address and port?
Regards,
Denis

Hi Steve,
Thanks for the reply! So, from now on, the address and port will be only configurable on the Agentry client? I guess it will be enough just to configure it once in the beginning for each user and then only login in the client will be sufficient?
Regards,
Denis

I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email. It has said "Verifyng" since yesterday, but has not sent a verification email. I checked my iCloud settings for that email address and it shows "pending".

I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email address to use to send/ receive messages. It has said "Verifyng" beside it in settings since yesterday, but has not sent a verification email. I have also tried Adding it as a new email address several times, but get the same outcome. I can still send/ receive texts from my phone number, just not from the email address.
In my iCloud settings under Contact Information for that email address and it shows "pending". When I select "Resend Verification Email" I get "Cannot Connect to iCloud".

Hello, Dorian071.
Thank you for visiting Apple Support Communities.
Here is the best article to reference when experiencing issues with iMessage activation issues.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H.

I have an iphone4. every time i turn it on i get an old I.D. and a message saying, "Apple password " then my email address and asks for the password. I have a different account that itunes on my computer recognizes. How do i remove this from my phone?

i have an iphone4. every time i turn it on i get an old I.D. and a message saying, "Apple password " then my email address and asks for the password. I have a different account that itunes on my computer recognizes. How do i remove this from my phone?

to remove that account.
go to settings > iTunes & App Stores > click on that apple ID then sign out.

Can we unlock an iphone which one locked with an email address and password.I have no idea about the email address and password for the icloud

can we unlock an iphone which one locked with an icloud email address and password.I have no idea about the email address and password for the icloud.can any one help me about this.

It sounds like you are talking about an iPhone that has been Activation Locked. This article explains:
http://support.apple.com/kb/PH13695
If so, the iPhone can never be unlocked without the original Apple ID and password. This is an anti-theft measure.

TS1702 When I try and use the Kindle app on my touch it keeps telling me to register the kindle. I register it using the account and password I used to get the app but it tells me there is no customer found for the email address and password. help

When I try and use the Kindle app on my touch it keeps telling me to register the kindle. I register it using the account and password I used to get the app but it tells me there is no customer found for the email address and password. help

No, it is asking you to register with your Amazon user id and password. Your Apple ID won't work.

Forgot my email address and password for old accou...

I have forgotten my email address and password for my old skype account. -_-" I made this one so I could post on here. I was wondering if I could get my old account back. The username is kaseynevada. I would greatly appreciate it. And even if you can't change my password if you could just remind me what email account I used with my that account that would be awesome. I'm pretty sure I can figure out the password for my email.

Please visit the thread which link pasted below for suggestions:
http://community.skype.com/t5/Security-Privacy-Trust-and/Password-Reset/m-p/1074828/highlight/false#...
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

So my brother is using my e-mail address and number for iMessage on his iPad and i do not want that but he is far away, is it possible to remove a device from using my e-mail address from my macbook ?

So my brother is using my e-mail address and number for iMessage on his iPad and i do not want that but he is far away, is it possible to remove a device from using my e-mail address from my macbook ?

Hi ShantellePhilips,
Thanks for visiting Apple Support Communities.
If your brother's iPad is using your Apple ID and phone number, and you want to remove this association, you can reset your Apple ID password. See this link for more information:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Note: If you no longer have access to the [iOS device] that is using the number you want to remove, reset your Apple ID password.
Apple ID: Changing your password
http://support.apple.com/kb/HT5624
All the best,
Jeremy

Hi emm when i go onto imessage and facetime it asks me for my email address and password and i put it in then i wait 2 mins then it says please check your network and then try again then i check it and it is fine plz what do i do?

Hi emm when i go onto imessage and facetime it asks me for my email address and password and i put it in then i wait 2 mins then it says please check your network and then try again then i check it and it is fine plz what do i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

WLS9: address and port of a starting member?

Hi
          I have a cluster running on different solaris 10 machines.
          Each machine has different virtual interfaces:
          myHostName1en1,myHostName1en2, myHostName2en1, etc... where myHostName#en0 is the standard network interface.
          Cluster's members are always binded on an interface different from the standard one.
          We restrict access to the admin server via connection filter so that only the addresses and ports of the members can access it. The problem is that a starting member (like every java process) makes its outgoing call from the standard interface(myHostName#en0).
          Is there a way to tell the members that they should open the outgoing connection on a specifical interface and port via system properties?
          Thank you in advance for your answer
          Best Regards

Carlo de Rossi <> writes:
          This is supported in WLS 9. Once bootstrapped the default listen
          address should be used for outbound calls (or admin channel address if
          configured). In order to route bootstrap calls over this address you
          need to set the property -Dweblogic.admin.ListenAddress=<address> on
          the command line of the booting server, where <address> is the address
          you want to bind to outbound and should correspond to the regular
          listen address when booted. You may also need to enable the admin port
          / admin channel for this to work.
          andy
          > Hi
          > I have a cluster running on different solaris 10 machines.
          > Each machine has different virtual interfaces:
          > myHostName1en1,myHostName1en2, myHostName2en1, etc... where myHostName#en0 is the standard network interface.
          > Cluster's members are always binded on an interface different from the standard one.
          > We restrict access to the admin server via connection filter so that only the addresses and ports of the members can access it. The problem is that a starting member (like every java process) makes its outgoing call from the standard interface(myHostName#en0).
          > Is there a way to tell the members that they should open the outgoing connection on a specifical interface and port via system properties?
          > Thank you in advance for your answer
          > Best Regards

How to determine which IP address and port is used to make DNS queries?

I am using JNDI/DNS API to query a Enum server (Tel URI resolution in VOIP world) what is a DNS server.
But I have many network interfaces, in a VLAN environment, and I must to specify from which interface (and port)
all the requests are sent.
When I read the code of JNDI/DNS API (in JDK 1.5) and specially the DNSClient class, I can see that the
DatagramSocket is created without parameters... : udpSocket = new DatagramSocket();
How can I specify the IP address and port to use for my client???
Thanks for your help.

I must to specify from which interface (and port) all the requests are sent. You don't have to specify the interface unless your static unicast routing tables are incorrect, and you never have to specify the port unless some lunatic is in control of your firewall.

To know IP address and port no using DB Link

Hi -
Is it possiable to know the IP address and port no of other oracle database that are connected with DB link. i.e for example
we have 2 oracle databases(For example A and B and it's schemas are A_A and B_B) on two different IP address and DB link is created on B database i.e using B_B user to access A database i.e A_A user. Now By using A database i.e A_A user can we know the IP and PORT NO of database B?

user4587979 wrote:
Hi -
Is it possiable to know the IP address and port no of other oracle database that are connected with DB link. i.e for example
we have 2 oracle databases(For example A and B and it's schemas are A_A and B_B) on two different IP address and DB link is created on B database i.e using B_B user to access A database i.e A_A user. Now By using A database i.e A_A user can we know the IP and PORT NO of database B?you can also know the ip address and port number by tnsping command.
$tnsping B
eg:-
C:\Documents and Settings\rajesh-kg>tnsping TESTDB
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-JUN-2
011 18:44:48
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oracle\product\10.2.0\db_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxxxxxxx)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SER
VICE_NAME = testdb)))
OK (50 msec)

Passing data to IP address and PORT???

Hi,
I am trying to do a scenario, where in I need to make a synchronous call to a IP address and Port.
The scenarion is
SAP--> XI --> IP address/Port.
Has anyone done this scenario, wherin you pass the string of data to a IP address and port?
Regards

The scenario is RFC --> SAP XI --> IP address/port.
We have to give the bank related data to an IP address and a port for which we have to do a socket level programming.
Its a synchronous call.
We are thinking of using JAVA proxies for the same. But the receiver side JAVA proxies have to sit on XI server?
Can we have receiver side proxies on SAP XI server and make a call to IP address and Port?
Can the .ear file be deployed on the XI server??
Thanks

Configuration for LDAP IP Address and Port for Exchange 2010

Similar Messages

Maybe you are looking for