Archiving functionality with financial modules
Hi,
When going through the concepts of archive and purge with oracle ebs , i found that we donot have archive functionality with
1. oracle payables
2.Oracle Cost Management
3.Order Management
Could some one tell me why we donot archive data from these modules alone????
Why is purge functionality alone present in all the modules??
Thanks,
Akila Manikandan.
Hi,
There are two conditions that you should keep in mind while using the Archive files with errors option
1. The Processing Mode has to be Archive not Delete in case you are using the Add Time Stamp for the archived files with errors(the second check option not the first one)
2. In case the processing mode is Delete you can not use the second ADD Time Stamp option but this also can archive files with errors
Ranjit
Similar Messages
-
File adapter - Archive issue with adapter module
Hi All,
I have 2 issues here. We are currently using PI 7.11 EHp1 SP02.
1. Arhival with "add time stamp" wont work. It just gives us an error message saying simpledate format exception.
I have gone through the OSS note 1265534 and thought this will resolve the issue. But our BASIS team believes this note is only applicable for PI 7.1 SP01. Can you one using PI 7.11 SP02 comment on this?
Note: Archive option with out add time stamp works fine.
2. When I use adapter module in my sender file configuration, the archive option itself does not work. Read the official SAP help which says "To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor."
So the question here is, how do we make the error permanent? The only way to throw error from adapter module is using the ModuleException. It has 4 different constructors. I have used both
ModuleException me = new ModuleException ("My error Msg"); and
Module Exception me1 = new ModuleException ("Error String", new Throwable("My error Msg");
In both the cases, the archival wont happen.
Any ideas welcome.
Thanks
JaiHi,
I am using NFS protocol here not FTP. Sorry I dint mention that earlier.
Thanks
Jai
Edited by: Jaishankar on Apr 1, 2010 9:55 AM
Edited by: Jaishankar on Apr 6, 2010 11:10 AM -
Basic functionality and few steps for how to integrate with PS module
HI Experts,
I am very new to C-projects .
So cn anybody put some light on what c-project is and how cn we integrate wth PS module step by step.
Thanks In adv.
Regards
AshisHi,
Please find some details about cProject below.
Collaboration Projects (cProjects):
SAP offers SAP Collaborative Project Management (cProjects). cProjects covers the entire range of project management activities in development and consultancy projects, from planning to implementation to project completion.
Value Proposition
cProjects supports organizations to grow their project management excellence by
a) providing solid standalone project management core support
b) offering a wide range of integration options
Key Benefits Include:
a) As single source of truth cProjects provides company-wide transparency of all projects.
b) Complete functional support for project planning, execution and controlling
c) Project structuring and scheduling
d) Clear responsibilities based on project roles
e) Well-defined handovers through approval protected phase gates
f) Effective Collaboration for all project stakeholders through web interface
g) Effective use of resources through cProjects enterprise resource planning and tracking.
h) Reduce project time to market and costs by implementing project templates
i) Timely and consistent status information based on dashboards, evaluations and alerts
j) Rapid access to all project related information in the entire SAP Business Suite.
k) Governance through comprehensive authorizations
l) Tracking project history through status reports and versions
Integration by Evolution
cProjects supports organizations in evolving their project management maturity by constantly adding enterprise integration capabilities to their project management solutions. Many customers start with cProjects by deploying it in a stand-alone scenario with limited integration. cProjects offers a wide range of integration scenarios to increase project reach and effectiveness. A cProjects implementation growths with our customers.
Integration Functions Include:
1)Cross project reporting with SAP NetWeaver Business Intelligence
2)Detailed Project Costing with SAP ERP Financials and Project System
3)Enterprise Resource Management based on SAP ERP Human Capital Management
4)Business object integration to the SAP Business Suite for example materials or sales orders
5)Portfolio integration including strategic resource management with SAP xApp Resource and Portfolio Management
6)Partner collaboration with SAP Collaboration Folders
7)Enterprise Portal Deployment and Collaboration Room integration
8)Confirmation of time and travel costs with SAP ERP Time and Travel
9)SAP CRM opportunity management integration
10)Powerful document management with SAP Document Management and SAP easyDMS.
11)Early Project Costing with SAP ERP Easy Cost Planning
Positioning
Since cProjects birth as development project management for the automotive industry it has emerged to a flexible project management solution for all industries and focused on various project types, including
new product development and introduction,consulting projects and IT projects.
SAP cProjects and SAP Project System (SAP PS) are both part of SAP's offering for Project Management. Customers can use them independently or integrated depending on project requirements. If both are used integrated for the same projects cProjects manages project schedule and resources while cost and budget are managed in SAP PS.
cProject integration with PS module
With cProjects 4.0 multilevel controlling is possible. For the project type multilevel controlling (either automatic or manual) could be chosen. It can be either for the project elements or the for the project roles. Once you are on the accounting tab and by choosing account assignment you may notice that for every cProjects element a corresponding WBS element getting created in the Project system. We can do costing thereafter for the WBS elements in the Project systems
Regards
Award points for useful answer
Edited by: Yogesh Pande on Dec 9, 2008 2:02 PM -
Using Multiple Functions with in members selection of Hyperion Financial St
Hello everyone, I am trying to retrieve all the level 0 entity members from a specific Level 3 entity member. Can I use multiple Functions with in Report studio to do this?? Or is creating an alt hierarcy my only option?
ThanksYou can try doing System Defined member list Lev 0 AND Descendants of Lv 3 member
JTS -
XML Publisher with Service Module - Service Request Reports -- URGENT
Hi all ... any pointers/help/guidance with the problem listed below would be much appreciated.
I'm working in the context of the Oracle Service Module & Service Request Reports.
I'm required to configure the XML Publisher Responsibility seeded functionality with the service module reports.
Listed below are the two reporting requirements that I'm considering , corresponding to the following seeded XMLP Responsibility seeded components:
(I'm quoting an extract from the Oracle TeleService Implementation & User Guide here).
Detailed Report
Data Definition: Service Request Detail Definition (CS_SR_DETAIL_DEF)
Corresponding Template: Service Request Detail Report Template (CS_SR_DETAIL_TMP.en)
Template Description: Includes all of the available service request attributes including charges, the two descriptive flexfields, and extensible attributes.
Summary Report
Data Definition: Service Request Summary Definition (CS_SR_SUMMARY_DEF)
Corresponding Template: Service Request Summary Report Template (CS_SR_SUMMARY_TMP_en)
Template Description: Includes a subset of the detailed report attributes including the same charges information as the detailed report.
When I log into the EBS >> XML Publisher Administrator Responsibility >> Service Application ... I find these seeded XMLP components, together with the preview data, downloadable templates & sample output.
The question is:
Where (responsibility/application/navigation/etc.) do I find the seeded EBS Service Reports to provide the expected XML input to the seeded XMLP Service Request Data Definitions & Templates????
Notes ...
I have found the following two reports, under the Service Application in EBS, set their output type to XML and viewed the output of the submitted request:
- Service Request Detail Report
- Service Request Summary Report
... but each of these two reports produce XML output of a different data model/structure to that expected by each of the corresponding seeded XMLP data-definitions/templates.
Additionally, I cannot find any corresponding concurrent program definitions on the system with the same SHORT-NAME/CODE as the seeded XMLP data definitions themselves i.e. CS_SR_DETAIL_DEF and CS_SR_SUMMARY_DEF.
Are the necessary reports not actually seeded within EBS? Do the seeded XMLP data definitions & templates require development of new Concurrent Programs from scratch to access the database tables and provide the necessary data/input, or am I missing something here??I am sure you found a solution to your problem. If not, to give a pointer to this issue, I guess these reports are gererated right from the service request screen and this definition is used there.This report can be generated from several places based on where you are within SR scree.
Thanks
Nagamohan -
MM Integration with other modules
Hello & thanks for being so quick in responding me ,
Can someone help me with the integration of MM-PP,MM-QM, is there anymore modules apart from these 4 which interact with MM i mean SD FI QM & PP.hi
FI-SD-MM Integration
http://www.sap-img.com/financial/integration-of-fico-with-other-modules.htm
http://www.sap-img.com/sap-mm.htm
http://www.sap-img.com/sap-pp.htm
http://www.sap-img.com/sap-qm.htm
http://www.sap-img.com/sap-sd.htm
nag -
Pipelined function with lagre amount of data
We would like to use pipelined functions as source of the select statements instead of tables. Thus we can easily switch from our tables to the structures with data from external module due to the need for integration with other systems.
We know these functions are used in situations such as data warehousing to apply multiple transformations to data but what will be the performance in real time access.
Does anyone have any experience using pipelined function with large amounts of data in the interface systems?It looks like you have already determined that the datatable object will be the best way to do this. When you are creating the object, you must enter the absolute path to your spreadsheet file. Then, you have to create some type of connection (i.e. a pushbutton or timer) that will send a true to the import data member of the datatable object. After these two things have been done, you will be able to access the data using the A3 - K133 data members.
Regards,
Michael Shasteen
Applications Engineering
National Instruments
www.ni.com/ask
1-866-ASK-MY-NI -
Only Financial modules implementation
Hello Everybody,
I have two different issues which I want to resolve and want to know what the best process would be.
# New Implementation
# Release 12.1.3
# One Company from another big ERP System to EBS
# Other Companies from different legacy systems to EBS
# Only Financial modules are being implemented for the 1st phase.
# Requirements have been gathered from all Co's and Gap analyzed.
# The Co. with the big ERP System is behind in requirements gathering & analyzing GAP and so the general opinion is to get it into General Ledger
directly through FAH.
Now there are two main questions.
Q 1) If only Financial modules are being implemented in AP how to make
payment without matching the receipt, without knowing the material or services
have been received, also how to handle the return of goods. Similarly in AR - how to
handle a similar situation. also, another aspect is the invoices in AP and
Transactions in AR - whether they should be keyed in manually or they should be
brought in through the standard API for AP and Auto Invoice for AR. Is there a
better way to handle this in terms of Application Integration Architecture, SOA
or BPEL etc?
1a) Open AR Transaction conversions - what is the best way of converting Open AR Transactions
from the legacy system to Oracle Financial module? Can I only convert open AR Invoices - create a
Transaction type for the purpose with no posting to GL or do I also need to
consider Open receipts in the process - I mean those unapplied receipts? What
happens with the AR Invoices which have been partially paid? How do you handle
those scenarios? How do you make sure you do not account for the transaction
twice? Can we use the Receipt API or is there a better way?
1b) How do you handle Sales returns where the AR Transaction is not there in Oracle Financials post GO Live?
This also becomes complicated since only Financial modules are being implemented in the first phase?
1c) Let's say Order entry is happening in the legacy system - in that case can we bring in the data through standard API
and run auto invoice on a regular basis rather than doing it in isolated fashion in Oracle Financials AR? How cumbersome or
difficult would it be to achieve this? If I need to bring in AR Transaction data from legacy system to Oracle
Financials on an ongoing basis then what is the best process to handle it other
than through the API and run the auto Invoice? Can the Service Oriented
Architecture or Application Integration Architecture be of any help in this
regard as well?
Q2) How to get the data from another ERP system to EBS - do we do a FAH (Resource
Intensive process), or can we get the data into GL Interface through the
standard API (for only a GL Journal Conversion) and a mapping table?
I will be extremely help if you can please suggest steps to resolve these issues.
Thanks,Hi Everybody,
Can anybody please respond to the above queries? I would request particularly Hussein and OctopusRex to please respond with any suggestions.
Thanks,
Arun -
Hi all
I have been working on a File(FCC) to File(FCC) Scenario. I am working on PI7.0 with SP12. I would like to archive all the files with errors, for which the sender file adapter shows an option Archive Faulty source files. But I am not able to archive any of the error files. Help.sap.com mentions that this functionality works when a permanent error occurs.
I have tried out with all possible combinations and I am still unable to archive the error file.
Please help!!!
Regards
KartikHi,
There are two conditions that you should keep in mind while using the Archive files with errors option
1. The Processing Mode has to be Archive not Delete in case you are using the Add Time Stamp for the archived files with errors(the second check option not the first one)
2. In case the processing mode is Delete you can not use the second ADD Time Stamp option but this also can archive files with errors
Ranjit -
How to create a function with ref_cursor as parameter in OWB 10.1
Hi,
Can any one help me how to create a function with ref_cursor as parameter in OWB 10.1.?
Its urgent. Please help me.
Thanks,
SivHi David,
Thanks for your reply.
Before going for this function, I need to create a package in transformation node in owb module.
My package is as follows,
Create or replace package 123
type xxx is RECORD ( parameters);
type yyy is RECORD (parameters);
type aaa is table of yyy;
type bbb is REF CURSOR return xxx;
type ccc is record (parameters);
type ddd is ref cursor return eee;
END;
How can I create the above kind of package manually in OWB 10.1 (Should not to import the package)
Please help me its urgent.
Thanks,
Siv -
Outlook: How to update folders in automatic archive function
When using the automatic archive function (pdf maker, single portfolio of emails) in Outlook 2010 we have the following problem:
Once set the email folders and subfolder structure of our archive remains at the status of its first setting. This means every time we rerun the archive function NEW folders/ subfolders (added after initial setup) will NOT be included!
Is there any way to automatically update the subfolder structure (e.g. below a main project folder) every time we rerun the archive function???
Otherwise this function is totally useless as any change in our Outlook folder structure is not reflected in the archiving functions, which means NEW folder and their contents are not archived!
We have like 20 projects with different archive paths we now have to archive manually each time we backup.
Thank you for your help!
JanRSA1
Go to the "Modeling" tab
Go to the "Source Systems" object type
Find your Source System
Right-Click on the source system
Choose 'Transfer Exchange Rates'.
Your BW Administrators team should have this function set up as a daily batch process. -
Implementing archive functionality
Hi all ,
I want to implement archive functionality.
I am using appfuse and maven.(spring framework)
In my aplication when user logs in he is provided with list of records from one table.
He should be able to archive as many recrds as he want.
I am not getting how to implement this functionality.
Code of jsp which shows al records is
<head>
<title><fmt:message key="engagementformList.title"/></title>
<meta name="heading" content="<fmt:message key='engagementformList.heading'/>"/>
<meta name="menu" content="EngagementformMenu"/>
</head>
<c:set var="buttons">
<input type="button" style="margin-right: 5px"
onclick="location.href='<c:url value="/engagementformform.html"/>'"
value="<fmt:message key="button.add"/>"/>
<input type="button" onclick="location.href='<c:url value="/mainMenu.html"/>'"
value="<fmt:message key="button.exit"/>"/>
</c:set>
<c:out value="${buttons}" escapeXml="false"/>
<form>
<display:table name="engagementformList" class="table" requestURI="" id="engagementformList" export="true" pagesize="25">
<display:column property="id" sortable="true" href="engagementformform.html" media="html"
paramId="id" paramProperty="id" titleKey="engagementform.id"/>
<display:column property="id" media="csv excel xml pdf" titleKey="engagementform.id"/>
<display:column sortProperty="dateLastMod" sortable="true" titleKey="engagementform.dateLastMod">
<fmt:formatDate value="${engagementformList.dateLastMod}" pattern="dd/MM/yyyy"/>
</display:column>
<display:column sortProperty="dateRcvd" sortable="true" titleKey="engagementform.dateRcvd">
<fmt:formatDate value="${engagementformList.dateRcvd}" pattern="dd/MM/yyyy"/>
</display:column>
<display:column property="title" sortable="true" titleKey="engagementform.title"/>
<display:column property="requestorsName" sortable="true" titleKey="engagementform.requestorsName"/>
<display:column property="requestorsExtensionNo" sortable="true" titleKey="engagementform.requestorsExtensionNo"/>
<display:column property="requestorsEmailId" sortable="true" titleKey="engagementform.requestorsEmailId"/>
<display:column property="LOB" sortable="true" titleKey="engagementform.LOB"/>
<display:column property="ITSolutionLeadsName" sortable="true" titleKey="engagementform.ITSolutionLeadsName"/>
<display:column property="ITSolutionLeadsExtensionNo" sortable="true" titleKey="engagementform.ITSolutionLeadsExtensionNo"/>
<display:column property="ITSolutionLeadsEmailId" sortable="true" titleKey="engagementform.ITSolutionLeadsEmailId"/>
<display:column property="solve" sortable="true" titleKey="engagementform.solve"/>
<display:column property="solveNumber" sortable="true" titleKey="engagementform.solveNumber"/>
<display:column property="typeofRequest" sortable="true" titleKey="engagementform.typeofRequest"/>
<display:column property="partOfProgram" sortable="true" titleKey="engagementform.partOfProgram"/>
<display:column property="reasonWorkRequired" sortable="true" titleKey="engagementform.reasonWorkRequired"/>
<display:column property="descriptionOfWorkRequired" sortable="true" titleKey="engagementform.descriptionOfWorkRequired"/>
<display:column property="impactIfChangeIsNotMade" sortable="true" titleKey="engagementform.impactIfChangeIsNotMade"/>
<display:column property="relatedProjectProgramActivity" sortable="true" titleKey="engagementform.relatedProjectProgramActivity"/>
<display:column property="quantifiedFinancialBenefits" sortable="true" titleKey="engagementform.quantifiedFinancialBenefits"/>
<display:column property="otherBenefits" sortable="true" titleKey="engagementform.otherBenefits"/>
<display:column property="funding" sortable="true" titleKey="engagementform.funding"/>
<display:column property="priority" sortable="true" titleKey="engagementform.priority"/>
<display:column property="priorityDate" sortable="true" titleKey="engagementform.priorityDate"/>
<display:column property="timingIssues" sortable="true" titleKey="engagementform.timingIssues"/>
<display:column property="alternativeSolutions" sortable="true" titleKey="engagementform.alternativeSolutions"/>
<display:column property="status" sortable="true" titleKey="engagementform.status"/>
<display:column property="username" sortable="true" titleKey="engagementform.username"/>
<%-- <display:column property="archived" sortable="true" titleKey="engagementform.archived"/> --%>
<display:column sortable="true" titleKey="engagementform.archived">
<input type="checkbox" name="archived" value="${engagementformList.id}" >
<c:out value="${engagementformList.id}" />
</display:column>
<display:setProperty name="paging.banner.item_name" value="engagementform"/>
<display:setProperty name="paging.banner.items_name" value="engagementforms"/>
<display:setProperty name="export.excel.filename" value="Engagementform List.xls"/>
<display:setProperty name="export.csv.filename" value="Engagementform List.csv"/>
<display:setProperty name="export.pdf.filename" value="Engagementform List.pdf"/>
</display:table>
</form>
<c:out value="${buttons}" escapeXml="false"/>
I ma not getting how will i collect all the reocrds that are marked for archiving in from this jsp and pass it to controller for archiving.
Can anybody have an idea about this or implemented this before.
Thanks in advance.yes,but i am notegetting how will i collect all the records for which checkbox has checked im this jsp and how to pass that list of records from jsp to controller. :(
-
Can someone explain the 'archive' function for TC?
Hi there,
When you access TC from Airport Utility, there are options to erase and archive the HD.
I have tried the archive function, but what I don't understand is how one utilises the archive. What happens if I need to use it?
Sorry if this seems obvious...
Michael.I think you misunderstand the archive function. As I stated in my first post, the archive is a clone of the Time Capsule HDD. It gives you an additional copy of the TC HDD. You may never need to use it.
To restore, that depends on what you need to restore... the entire system or individual files. You restore your entire system with your install disks and using the TM backup to restore. To restore file(s) you preferably use your TM interface. -
Hello, Pals:
We're about to implement SAP Financial Module,as most of us,we have checked lots of material related with it for some days,but soon we found all those stuff could only showed us general information of SAP system.What we now need is something like blue prints which was 'real' used in a certain project.So if anyone who would like to send me some documents like that would be very much appreciated. and also if you have your own experience which would like to share with us. I would be love to wait.
thanks guys.
my email:[email protected]Hi Jyotsna,
If you can send the same document to me that would be highly appreciated and also tell me how I can assign points to you as I don't know.
My mail id is [email protected]
Thanks in advance.
Regards,
Vineela. -
Reporting cell comments with Financial Reporting
Hi all,
Is there anyway to report comments attached to cells in "Planning data forms" with Financial reporting? Which function should I be using to do that?
I am using the 11.1.2.2 version.
Thanks.I believe the functionality is <<CellText("GridName", Row, Column, Page)>> whcih retrieves planning cell comments.
The full FR studio guide is here: http://docs.oracle.com/cd/E17236_01/epm.1112/fr_user_epm/frameset.htm?launch.html search for celltext and it will give you more detail.
Edited by: Agnete on Aug 28, 2012 9:44 AM
Maybe you are looking for
-
How do I import an iPhoto library to an existing iPhoto library?
I have about 6-7GB of photos stored in iPhoto on an old MacBook. I want to import them to an existing iPhoto library on my wife's new iMac. What's the best way to do this without losing any data? I have an external USB HD, but I'm not sure the bes
-
How do I create an iPad dps app that needs a password to enter?
I need to create an iPad dps app for a corporate client and they have asked the question if after download, we can have it password protected to enter? If so how do I go about this? so the app has a log in page once loaded?
-
IDoc Data Lost between ECC and MII Message Listener.
We have recently experienced some network issues which caused the IDoc's to stop flowing outbound from ECC to MII Message Listener. This happened 3 times during a network switch reconfiguration. 2 of the three occasions the MII Message listener had
-
Why won't my mac highlight items when I click and drag?
Has anyone had their mac suddenly stop highlighting? When I click and drag it does not highlight.
-
Metadata update needed -- Is there a way to tell what change will be made?
Hi all, I have many thumbnails which show that metadata updates are pending. Is there any way to find out what metadata will be updated when the commit is made (Keystroke splat-s on mac?) Thanks in advance, $$PhotoHobby