At the urging of an Apple Store employee, I upgraded to OS Lion X. However, Excel does not recognize the hard drive and I cannot save any work. I understand there is a small compatibility issue - any suggestions ?

I need some direction on fixing an issue with excel and lion x which has a compatibility issue - can't save my work to a hard drive.

If you made a backup before installing lion, now would be a good time to restore that backup.... Ok, well you can always boot into lion recovery menu.... shut down your mac, hold down the option key and restart your computer..... Select recovery from the disk startup menu and go to disk utility... select the OSX disk, you can try repairing your permissions and repairing the disk.... If you lucky enough, it will fix it.... If not, and you have a decent internet connection, click the reinstall LION OSX after exiting disk utility. Your mac will now REDOWNLOAD LION OSX and reinstall it.... did you happen to make a backup before?
Also, did your mac originally have Leopard? Just curious... Because LION is entirely 64bit now where as Snow leopard had support for 32 bit as well, but the problem may be that some of your older apps where 32 bit.... This is just a guess though I'm not sure.... Because I've had numerous problems and crashes with my CS 4 stuff and final cut pro 7 and aperature.... Not sure if it's totally related to the whole 64 bit thing, but the thing is that the crashes are only occuring on my 32 bit apps.... otherwise the computer runs great.... To remedy, I had previously made an OSX lion USB drive so that I could do a fresh install of LION. I backed up all my data and files, installed a new SSD and my Macbook is SCREAAAAAAMING fast.... Sorry about the gloating but I'm sure we'll get to the bottom of your problem....

Similar Messages

I upgraded my cloud storage from 2G to 120G and today it went back to 2G and I cannot save my work. Anyone experience this? Unable to get any customer service.

I upgraded my cloud storage from 2G to 120G and today it went back to 2G and I cannot save my work. Anyone experience this? Unable to get any customer service.

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

My iMac with Mavericks update does not recognize my brother printer and I cannot even add the printer info in the system preferences printer list. What is WRONG?

I had to buy a new printer when I got my Imac and I chose the Brother multifunction inkjet MFCJ470DW. It worked fine when my Mavericks version was 10.9.1, but after the automatic update to 10.9.2 the computer no longer recognizes the brother, or says it isn't connected, and when I deleted it from printer preferences and attempted to re-enter it as default printer, I cannot even type anything into the list of printers when I press the + sign to add. What am I doing wrong? Can someone please tell me even how to add text into the printer preferences list?

I had some of the same issues your having, deleted the printer from Printer and Scanner in System Preference.
What I ended up doing was connecting the printer with a USB cable like it was a new set up, down loaded the drivers from Apple, still did not seem to work, but did a coupel of restarts and the printer was found then I completed the set up.

In Windows 7, I have two alternative languages available. however, Firefox does not recognize the alternat keyboards when I choose them. Does Firefox have the ability to add other language keyboards to be available when selected?

Windows 7 and previous versions gives the ability to add additional keyas validboard selections to be available when selected. The command logo is located on the bottom right of the bottom command bar. I have tried several times to type emails in my Yahoo Mail program while in Firefox, and though the selection shows on the bottom bar, the keyboard is still in English. I do not wish to change the operating language. I just want to have the availability when needed.

Easiest to switch the keyboard layout is to assign a specific shortcut key to each layout (e.g. Shift+Ctrl+9)
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
*http://support.microsoft.com/kb/258824 - How to change your keyboard layout

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.

HT204053 I just changed my Apple Password and icloud does not recognize the password.

I just changed my Apple Password and icloud does not recognize the password.

To change it on your iPhone you have go to Settings>iCloud and delete the account, then set it up again with your new credentials. When you delete the account from your phone it will delete any data you are syncing with iCloud (such as contacts and calendars) from your phone but it will remain in iCloud. Provided your are signing back into your existing account and not changing to a new account, it will be synced back to your phone when you sign back in.

HT3529 I'm having trouble with my iPhone 5 iMessage service. The device does not recognize the users who have iMessage when I try to contact them using this feature. Who have the same issue and what did you do in order to solve it?

I'm having trouble with my iPhone 5 iMessage service. The device does not recognize the users who have iMessage when I try to contact them using this feature. Who have the same issue and what did you do in order to solve it?

Read here:
http://support.apple.com/kb/ts2755

I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change.

I use itunes to store my music but I use Virtual DJ Broadcaster to play it. Somehow itunes has changed from Itunes Music Library to Itunes library. Virtual DJ does not Recognize the change. Virtual DJ at present seeing an older version of my libraries. Is it possible to Save my last library and Playlist and re-name everything else in my itunes account so it will again show "Itunes Music Library" Past libraries are of no consiquence . I'm hoping removing everything except the last Library on my computers will make Virtual DJ recognize it. I tried renameing the Library to "Itunes Music Library" but it did not work. I fear the problem is in the Registry and without the correct path I am reluctand to play around in there. Any help would be appreciated.

Incidentally, my first thought was to map a network share from the NAS to my computer, so that my music files appear on the Z: drive, say on my computer. I could then set up iTunes to store music etc in that folder, and to copy all new items to that folder. However, if I do that, all that'll happen is that on my NAS, the library file will become out of date as I add music to the collection but not to the index.

I have Lightroom 3.6 and it does not recognize the raw images from my Canon 7d mark II, suggestions?

I have Lightroom 3.6 and it does not recognize the raw images from my canon 7d mark II, suggestions, do I need to upgrade?

Yes, you need an upgrade for native support in Lightroom. You need version 5.70 or higher; current version is 5.71.
Alternatively, you could use the most recent DNG converter and convert the raw files to DNG files before importing into Lightroom.

Why Apple does not recognize the serial number of my iMac?

why Apple does not recognize the serial number of my iMac?

You're positive you have the correct number?
Open System Profile /Applications/Utilities
Select Hardware on the left under Contents
Serial number is on the right under Hardware Overview
You can copy and paste it from there to here > Apple - Support - Check Your Service and Support Coverage

I changed my apple id on my computer and my iPad does not recognize the new id

I changed my Apple id on my computer and my ipad does not recognize the new id and continues to display the old id. How can I get it to change to the new id?

Easy Fix: On your iPad, go into Settings>Mail,Contacts,Calendars and click on your hotmail account. Simply replace the password that's already there with your new one. Then, I recommend rebooting your iPad:
To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
If you've already tried this, then the next step would be to delet your hotmail account from your iPad (also in Settings>Mail, Contacts, Calendars) and then reboot the iPad and add the account back again.

Lightroom does not recognize the raw format of files loading from my Nikon AW1 and loads them as jpegs. I know there are updates that would allow this camera to be recognized as shooting raw but I haven't been able to work it out. Any help out there?

Lightroom does not recognize the raw files (necs?) coming in from my Nikon AW1. It loads them as jpegs. I know it is possible to update Lightroom so it knows my Nikon but I can't get it to work.
I would like files to be loaded as .dng.

update by downloading the files directly and then applying them for lr 4 and earlier, http://www.adobe.com/downloads/updates/
for lr 5.7.1, the last lr 5 update, use the below link:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 6| 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Windows 7 in bootcamp does not recognize the wifi and usb

i have just made the bootcamp with Win7. it does not recognize the wireless driver and the high resoltion screen.
plus every time i have set the right click of trackpad.
could any one help me in solving this issue?
is there any way to upgrade the bootcamp driver from 3.0 to 3.3 without passing through 3.1 and 3.2?

You might wan't to ask in the Boot Camp forum where the Boot Camp gurus hang out.
https://discussions.apple.com/community/windows_software/boot_camp
It sounds like you have not yet completed the Windows installation process by installing the Windows drivers.

Computer with Windows Vista SP 2 and Desktop 5.0.0.11 does not recognize the BB via USB

Hi all,
I have had an 8100 for some time. Recently the desktop will communicate to the 8100 via bluetooth but Windows does not recognize the 8100 when I plug it in via USB. I have tried downloading and reinstall the desktop with no luck.
Suggestions?
Jim

Hi and Welcome to the Forums!
Here is the list of troubleshooting KB's...hopefully something will be useful:
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Anyone who has had a webcam failure where the "device manager does not recognize the hardware"?

HP Pavilion dv7 running win 7 64 bit
Device manager does not recognize trueVision HD webcam. Tried all the suggestions on HP website, which eventually says it's a hardware failure. Has anyone had any resolution to this issue? I see the problem occurs across various platforms with varying resolutions to the problem.

Ha Ha. I'm replying to my own post!
Solution.... If your laptop does not recognize the built-in camera at all in the device manager and your warranty has expired or your willing to void your warranty. You can see if you have the same problem as I had. Gently pry the plastic frame around your camera and display screen apart you need to go at least half way down the sides. There is also some adhesive tape you will need to push to one side or the other. To the right of the camera there is a very small connector, it wont even look as if it is separated. Use a tweezer or small screwdriver to push the connector into the socket. This fixed my problem ...The next startup recognized the camera and has worked perfectly since. In my opinion (13yrs experience in reliability engineering semiconductor manufacturing) this is a manufacturing reliability issue either the socket cannot hold the connector in place or there is too much strain on the wiring to the connector. Good luck.

At the urging of an Apple Store employee, I upgraded to OS Lion X. However, Excel does not recognize the hard drive and I cannot save any work. I understand there is a small compatibility issue - any suggestions ?

Similar Messages

Maybe you are looking for