Background job - not sure if its executed in BG

Hi,
I wanted to submit my program in background and have used
Job_open, Job_sumbit, Job_close FM's.
I have passed following parameters.
Job_open - jobgroup, jobname,sy-datum, sy-timlo
job_submit- sy-uname, jobcount,jobname,sy-langu, sy-repid
Joc_close-jobcount,jobname,sy-datum,sy-timlo.
My program doesn't show any error.
But I am not sure if it's really executing in background....how to find out?
I have checked in SM37 and my
duration time is 0
delay time is 25 secs
status - released
startdate & time is empty.
Does this mean it never ran in background?
Plz help

Hei ....
After passing immediate start in job_close.....
In SM37 i have
Status as : canceled.
have start time
have start date.
duration as 567
delay as 60 secs.
which is better that what i have done previously....Now i get the duration time, start date, start time.
How can i escape from "canceled"?
thanks

Similar Messages

Updated but not sure if its right

i updated my firmware version for my N97 from 10.0.012 > 11.0.021 but im not sure if its right, when i do *#0000# it shows my new version of the software, but my internal memory stays intact, i did not lose any files(even though i did a backup) is that alright? did any of u guys have the memory wipedout after the update? help pls asap im very new to this
Solved!
Go to Solution.

ok, did what u told, so i wanted to help u guys too who might encounter problems like mined,
USB detection error fix
PC does not detect N97 or USB charging connection not detected
Widget
Home screen online/offline widget crash fix
Fix for “Alphabetical and Number input are mixed in facebook until end key is pressed
Widget UI improvement - New facebook widget fixes a problem of Home Screen background visible on soft-key area
Browser fixes to improve widgets stability.
MfE related fixes
Partial fix for Messaging/calendar entry lost
Mail for exchange calendar entry synchronization error fix
UI transition error fixes (Portrait <-> landscape transition, there is a home screen corruption.)
UI transition (Slowness and bad effects)
Slow Touch UI response
Picture of the device lock appears half of the screen when transitioning the UI sometimes
Landscape: in some cases the soft buttons on touch (right hand) show the Home Screen in background (install maps.google.com)
Photos thumbnail performance and stability improvements
Device performance deteriorates when lots of content in the device - especially photos
Partial fix no display backlight illumination when unlocking lock-key - CAP Genius reported already
New version of Accueweather to improve the “Connection error” situation
Device reset when browsing with high speed packet access (for Malaysia)
“Browser soft key UI doesn’t work after putting Chinese character with qwerty keyboard”
Java fixes (TCK, Pre-install app disappearing, *#7370#*)
Operator fixes (CMCC, Hutchson and Telefonica, Vodafone)
Ovi store client now embedded in the core image

We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now

to
We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now so we can possibly recover our laptop? Any one who can point us in the right direction that would be great and we would be very grateful. Thanks So Much

Lojack for laptops - if that is the product you purchased and installed, you will need to read the user manual or contact the manufacturer as it is 3rd party. You did file a police report right?

HELP! Resetting all setting on iphone 5, but then i tried to restart it. Not sure if its stuck or resetting

Hi if you seen my previous post, or you might have not. My safari app isn't working and the setting for safari in setting insn't responding. I reset all setting hoping this would work and fix the problem. However, i held both the home and off button because i didn't want to do the reset anymore because i was stuck at one place for a long time. the reset with the home did happen, but the resetting all setting is still happening and progress bar hasn't move. Im not sure if its stuck or if its just taking a while.

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Bought 64gb playbook from amazon and not sure if its new or refurbished.

Bought 64gb playbook from amazon for my daughter and not sure if its new or refurbished. Tablet has small fine scratches on the back, hair stuck in the casing, no screen protector, brown adaptor box has had label of some kind removed, adapter inside is loosely bound. Amazon supplier advises me to return but also that it isn't supplied with a screen protector or cover and adapter is new and packaged in a brown box. Not sure whether to accept a replacement or just get a refund. A bit concerned that this is a refurbished item being supplied as new.
Solved!
Go to Solution.

Definately sounds like it's not a new item, this isn't how they come packaged.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

In my Iphone 5, Nothing on my App Store is working, its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

settigns>itunes and app store to make sure you are signed in.. If you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

Background job not deleted

Hi Experts,
i want delete the "SM:SELFDIAGNOSIS" background job on solution manager system .
and i have deleted, go to next date and then delete the released job but after one day again its showing in released.
so how i can delete it properly .
Regards
jai kr.

Shiv,
First check the frequency of this job from SM37
Go to SM37 -> give your job name ->and select all the options like
delete the entries in start date and end date fileds. then execute.
If you find job in Released state ,simply go to menu Job -> click on release to schedule.
Now this job will in Schedule and won't run untill you release it.
Deleting the jobs is not good idea ,simply you can suspend it.
Regards,
Srinivas Chapa.

Background job not updating data for some steps of program

We have created a custom program and submitting the standard program RPRCCC_READ_KR1025
which is used for conversion of AMEX credit card files.
Since this program can update data for 1 company id at a time,we have created a background job
for that program with 10 steps and 10 variants of data related to 10 different company codes.
when this job is executed it is not updating data for all the 10 files , sometimes it updates 5,7,etc...
If we execute the other files which didnt update in job manually they are getting updated.
All the files executed with that program can be seen in PRTA transaction.
Regards,
Gautham.
Edit: Solved.
Since the standard program updates the database every time with commit work
there should be some time until the next database update,so we can use wait command
after the submit statement which will do the trick.
Edited by: Gautham Vangaveti on Aug 5, 2010 7:20 PM

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Background Job Not Reconnected After Offline Backup.

Hi all,
Background jobs which are scheduled before Databse Offline Backup are always cancelled. Reconnect WP does not happen even if following parameters are set.
We had set profile parameters in all Application Server like
   rsdb/reco_trials = 15
   rsdb/reco_sleep_time = 60
   rsdb/reco_add_error_codes = +3113 +3114 +1012 +1014 +1033 +1034 +1089 +1089 +1090 +1092
R3 Production server (640 Kernel, Patch 175 , SAP_BASIS 620 , SAP_APPL 470)
   Database : Oracle 9.2.0.6
SYSLOG Msg : SM21
<b>     Communication error, CPIC return code 020, SAP return code 497
       > CPI-C function: CMINIT(SAP)
       Operating system call gethostbyname failed (error no. 0 )
       Operating system call gethostbyname failed (error no. 0 )
       Communication error, CPIC return code 020, SAP return code 497
       > CPI-C function: CMINIT(SAP)
       Communication error, CPIC return code 020, SAP return code 497
       > CPI-C function: CMINIT(SAP)
       Communication error, CPIC return code 020, SAP return code 497
       > CPI-C function: CMINIT(SAP)                                   </b>
Thanks & Regards.
Naba

Looks like some Gateway error....though not sure...
Check Note 63347 - List: CPIC error codes and then u can try to troubleshoot further...

Background job not automatically poopulating Dependant Demand

Hi Users,
We've recently set up a POS & PA using the DP-BOM selection and characteristics, manually created PPM's and generated CVC's using the BOMS. All of this is set up fine in our SCM 7.0.
The background job has created the forecasts for the ouptput products but NOT the input product.
Now if I call up the parent material, and then choose to show the input products the dependant demand is generated. If I now return to the material with the dependant demand, it now shows the demand from the parent.
Or, if the forecast is genereated interactively, then the dependant demand is poopulated.
Is there an automated method to populate the dependant demand when using background jobs? I would like to think that we don't have to query every sales BOM parent in DP and drill into the input products to load the dependant demand?
Please let me know if there is an easier way to do this as part of the background processing.
Thanks
Edited by: Paul_111 on Mar 31, 2011 4:20 PM

Hi Andand,
Thanks for your reply and sorry if my post is confusing.
As far as the PPM with imputs A & B, output C - I have this relationship working and calcuclating demand in DP no problems.
If I now add a new PPM combination inpput X, Y and output Z. Create the BOM CVC and TSO so its all set to go. Add to selection profiles and background jobs.
Now, if I run the background job to create the forecast and this runs successfully. Now I check my products.
Z has the forecast generated, X & Z have no dependant demand showing.
The only way I've found that pushes the demand to X & Z is:
- open product Z in demand planning and then choose the option to show input products from the header
OR - from demand planning, select the univariate forecast to run interactively.
My issue:
The background job (if run alone) does not push the forecast on Z to X & Y.
And if I show the input products or create forecast (as bove) the dependat demand is shown on X & Y.
This is going to be a slow process if we have to do this everytime we run the backgound job.
What am I missing when running the background job?

Background job not run properly

Hi,
When an infopackage is triggred through process chain in BI a background job will be exeuted at R/3 to fetch data from R/3.
But the bakground job did not execute properly hat is it did not fetch any data but ot finished.
But when the infopackage is executed manually the background job fetches the data from R/3.
Why the job is not fetching data when triggered through process chain.
Please help me to sole this issue.
Regards,
Indhu

Hi Induja,
In your case, you will have to debug the background job that is activated through BI. Check if proper data is coming from BI.
You can only debug a background job if it is created under your user id. Thus, to debug the job you first have to own it and then debug by selecting it and either typing 'JDBG' in the command field or through menus available on the top.
Job overview transaction code - SM37.
Hopefully the issue is in Development/Test/Quality system and not in Production.
Hope that helps!.
Regards,
Saba

Background job not generating spool

Hi all,
I am calling a report from another report. The called report will display the final output list.
Here, the called report will be executed in background.
here the job is completing but the spool is not generated.

Hi,
It seems that the final internal table which has the output data is empty & hence write statements are not executed ( assuming all the write statements are inside a loop).
Place one write statement outside loop like
write :/ 'Following is the result :'.
& check whether spool is generated. If yes, then the problem is of empty internal table.
You can select the job in SM37 & type JDBG in command prompt to debug a background job.
Debug & check the issue.
Best regards,
Prashant

Background job not yet been Finished

Hi,
I have set a Background job today at 10:15 to start run at today 11:30 AM.
it is a periodic daily process at 11:30 am.
But when i checked the status of this job, its still in the status Released.
i know that, this job will not take more then 20 mins
what could be reason?
Regards,
Swetha

Hello Sweta,
As the job is in 'released' status so you can say that it has not started running, it will come to 'active' status as soon as it starts running, so you should not fear to cancel the job scheduled.
Answer to why in 'released' status for such a long time may be due to some network speed problem or due to some other jobs alreay running in the system which would be occupying all the work processes which are available in the system. If possible try to find the job which has taken more that 65 thousand seconds, kill that job and then refresh after 5-10 mins to see the status of your job.
Hope it helps.
Thanks,
Jayant

Background job not working for VF02

Hi,
When i give schedule RSNAST00 report in background for one output type its not generating spool, but the job status is in Complete. But in foreground it fine.
For another output type its working fine in background.
Is there any printer setting has to be done in driver program or in smartforms? Kindly help me on this.
Regards,
Vijay.

Hi,
Check whether u have assigned following values.
      l_wa_control_parameters-device      = 'PRINTER'.
      l_wa_output_options-tddest            = nast-ldest.
      l_wa_output_options-tdimmed         = nast-dimme.
      l_wa_output_options-tdnewid          = 'X'.
      l_wa_control_parameters-no dialog = 'X'.
CALL FUNCTION l_fnmod    "'/1BCDWB/SF00000149'
EXPORTING
control_parameters = l_wa_control_parameters
output_options       = l_wa_output_options
Still the problem exists then i wil send u the code.
Regards,
Vijay.

Background Job not Printing TOs immediately

Hello experts,
I am having an issue with printing Transfer Orders created by background job, the output requests are sent to the output controller with status '-' . It works when I manually create the TOs or if I run the RLAUTA10 program with my userID in SE38 .
I have set the background job user default print parameters in SU3 to print immediately.
Also in the Job step, I have set up the print parameters to 'print immediately'
I have assigned printer for sorce storage type & set the indicator to use the source sto type in OMLV, The printer seems to be determined correctly, I've checked the Spool request name & printer in the spool controller, only issue seems to be the print not being triggered immediately.
Not sure, if there is some other setting that I have to make to be able to print the TOs created by the background job immediately.
Any help would be appreciated.
Thanks
Kris T

whether the printer which you assigned is configured in SAP (network printer)? or LOCL?
printing may not happen if LOCL(background job)
Thanks

Background job - not sure if its executed in BG

Similar Messages

Maybe you are looking for