Background job not run properly

Hi,
When an infopackage is triggred through process chain in BI a background job will be exeuted at R/3 to fetch data from R/3.
But the bakground job did not execute properly hat is it did not fetch any data but ot finished.
But when the infopackage is executed manually the background job fetches the data from R/3.
Why the job is not fetching data when triggered through process chain.
Please help me to sole this issue.
Regards,
Indhu

Hi Induja,
In your case, you will have to debug the background job that is activated through BI. Check if proper data is coming from BI.
You can only debug a background job if it is created under your user id. Thus, to debug the job you first have to own it and then debug by selecting it and either typing 'JDBG' in the command field or through menus available on the top.
Job overview transaction code - SM37.
Hopefully the issue is in Development/Test/Quality system and not in Production.
Hope that helps!.
Regards,
Saba

Similar Messages

Background Job not running

Hi All,
A background job has been scheduled to run every minute.It was working fine but a few days back it did not get scheduled for 2 hours . Any suggestions as to why this might have happened.
TIA.
Vartika

Hi Manik,
The job started working fine after 2 hours. It was only for 2 hrs that it did not work. How to check if the userid was locked or not during that period.
Thanks
Vartika

Oracle Job not running properly

Hi All,
I am facing an issue with oracle jobs.
I have writtent the script of a job scheduled to be executed automatically after 2 seconds.It works on a table and dequeue the data in that table.
Now the job is not able to execute for next time.If i execute the job immediately then also it does not run for next time.
so where could be the problem...
Please give me pointers.
Thanks in advance :)
Thanks n Regards
Arun

user10280915 wrote:
Hi All,
I am facing an issue with oracle jobs.
I have writtent the script of a job scheduled to be executed automatically after 2 seconds.It works on a table and dequeue the data in that table.
Now the job is not able to execute for next time.If i execute the job immediately then also it does not run for next time.
so where could be the problem...
Please give me pointers.
Thanks in advance :)
Thanks n Regards
ArunThings that you'll need.
1. JOB_QUEUE_PROCESSES to be non-zero
2. A commit after submitting the job
3. The job not to be broken.
4. don't schedule very frequently (say <5s) if the os is Linux :( ).
I'd check in the above order.
Niall

Scheduled Job not running properly

Hello Friends,
I have a webservice that sends the mail to 24 or above users at a single go . This functionality I need to schedule . So I designed the job for same purpose , now the problem is that the webservice is running absolutely fine but once the job is scheduled and run , the mails are not send . I tried to send a single mail also with the help of scheduler API and was succefull in doing that but If the webservice needs to send more than one mail , this does not happen through the Scheduler API
I also had encountered problem while runnign the webservice earlier. I was getting the Read timed out error during execution of webservice For its solution I increased the time out period of the webservice mannually ( from the left panel , the time out period can be increased in WebService Navigator ) and the problem got solved , this you cant do once you have scheduled the job so one of the reson may this time out expiration also .
So can any one help me out with the way to increase the time out period for the webservice not mannually rather in a more stabel and permanent way
Edited by: Smriti_techno on May 5, 2009 8:50 AM

hi
refer this link for example of scheduler api
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90a95132-8785-2b10-bda5-90d82a76431e
let me know am i correct or not
bvr

Convert Spool to PDF and mail for the jobs not run in background.

Dear All,
I need to convert the spool job into pdf and mail as attachment for job not run in background.
I am printing the bills using the program SD70AV3A to print the bills in a batch using the SUBMIT.
But i am not using the spool options since its going to into waiting state in spool...and i need to change the printer properties to G
to get the printer to print the reports as these jobs run in backgroud....but this solution is not acceptable solution.
SUBMIT SD70AV3A
         WITH RG_KSCHL-LOW = 'ZRR'
         WITH RG_NACHA-LOW = '1'
         WITH PM_VERMO = '2'
         WITH PM_NSORT = '1'
         WITH RG_VBELN IN range.
*        TO SAP-SPOOL
*        SPOOL PARAMETERS print_parameters
*        WITHOUT SPOOL DYNPRO
*        VIA JOB name NUMBER number
*        AND RETURN.
so how do i get the spool number from the above after the job is submitted....and then convert into pdf and mail
please suggest some solution. I have searched on net but most the solutions are say to run the job as background job...
i have also looked into the program RSTXPDFT4 but it asks for the spool id ....how can i get spool id for the job that has been completed.
please suggest some solution.
Thanks
Bhargava.

Hi,
Spool to PDF : FM 'CONVERT_ABAPSOOLJOB_2_PDF'
Table TSP01 to get spool number
You ,may need to convert OTF to PDF: FM CONVERT_OTF
and the to binary : FM 'SMCS_XSTRING_TO_BINARY'
To send mail use class: cl_document _bcs.
Regards,
Maria João Rocha

Background job not automatically poopulating Dependant Demand

Hi Users,
We've recently set up a POS & PA using the DP-BOM selection and characteristics, manually created PPM's and generated CVC's using the BOMS. All of this is set up fine in our SCM 7.0.
The background job has created the forecasts for the ouptput products but NOT the input product.
Now if I call up the parent material, and then choose to show the input products the dependant demand is generated. If I now return to the material with the dependant demand, it now shows the demand from the parent.
Or, if the forecast is genereated interactively, then the dependant demand is poopulated.
Is there an automated method to populate the dependant demand when using background jobs? I would like to think that we don't have to query every sales BOM parent in DP and drill into the input products to load the dependant demand?
Please let me know if there is an easier way to do this as part of the background processing.
Thanks
Edited by: Paul_111 on Mar 31, 2011 4:20 PM

Hi Andand,
Thanks for your reply and sorry if my post is confusing.
As far as the PPM with imputs A & B, output C - I have this relationship working and calcuclating demand in DP no problems.
If I now add a new PPM combination inpput X, Y and output Z. Create the BOM CVC and TSO so its all set to go. Add to selection profiles and background jobs.
Now, if I run the background job to create the forecast and this runs successfully. Now I check my products.
Z has the forecast generated, X & Z have no dependant demand showing.
The only way I've found that pushes the demand to X & Z is:
- open product Z in demand planning and then choose the option to show input products from the header
OR - from demand planning, select the univariate forecast to run interactively.
My issue:
The background job (if run alone) does not push the forecast on Z to X & Y.
And if I show the input products or create forecast (as bove) the dependat demand is shown on X & Y.
This is going to be a slow process if we have to do this everytime we run the backgound job.
What am I missing when running the background job?

Background Job Still Running - Data Can Be Displayed Only Msg Populated in Maintain Versions (OKEQ) Screen

Hi,
I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
How can I resolve it.
Waiting for your valuable suggestions.
Regards,
Nageswar.

Dear Rajneesh Saxena
Thanks for your prompt reply.
Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
Problem is solved
Regards,
Nageswar.

Background job is running for long tome in source system (ECC)

Hi All,
Background job is running for long tome in source system (ECC) while extracting data to PSA.
I checked in ECC system SM66,SM50 the job is still running
in SM37 the job is Active
There are only maximum 7000 records the extractor is 2LIS_02_ITM but it is taking 11 to 13 hours to load to PSA daily
I had checked enhancements every thing is correct.
Please help me on this how can I solve this issue.
Regards
Supraja K

Hi sudhi,
The difference between Call customer enhancement... and Result of customer enhancement:... is very less we can say this as a second.
The difference is between LUWs confirmed and 1 LUWs -
   and Call customer enhancement -
Please find the job log details below, and give me the solution to ressolve this
01:06:43 ***01:06:43 * ztta/roll_extension........... 2000000000                              *                 R8           050
                 R8           048
01:06:43 1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA     RSQU          036
06:56:31 Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 5.208 records                  R3           407
06:56:31 Result of customer enhancement: 5.208 records                                              R3           408
06:56:31 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 5.208 records                      R3           407
06:56:31 Result of customer enhancement: 5.208 records                                              R3           408
06:56:31 PSA=1 USING SMQS SCHEDULER / IF [tRFC=ON] STARTING qRFC ELSE STARTING SAPI                 R3           299
06:56:31 Synchronous send of data package 1 (0 parallel tasks)                                      R3           410
06:56:32 tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =                           R3           038
06:56:32 tRFC: Start = 00.00.0000 00:00:00, End = 00.00.0000 00:00:00                               R3           039
06:56:32 Synchronized transmission of info IDoc 3 (0 parallel tasks)                                R3           414
06:56:32 IDOC: Info IDoc 3, IDoc No. 1549822, Duration 00:00:00                                     R3           088
06:56:32 IDoc: Start = 04.10.2011 06:56:32, End = 04.10.2011 06:56:32                               R3           089
06:56:32 Altogether, 0 records were filtered out through selection conditions                      RSQU          037
06:56:32 Synchronized transmission of info IDoc 4 (0 parallel tasks)                                R3           414
06:56:32 IDOC: Info IDoc 4, IDoc No. 1549823, Duration 00:00:00                                     R3           088
06:56:32 IDoc: Start = 04.10.2011 06:56:32, End = 04.10.2011 06:56:32                               R3           089
06:56:32 Job finished                                                                               00           517
Regards
Supraja

FOR ALL ENTRIES stmnt. in SELECT query is not running properly

Hello experts,
          In my report program, I write one query on table BSIS.
         Internal table declaration -
       DATA : BEGIN OF DLC_BSIS OCCURS 0,
                        BUKRS LIKE BSIS-BUKRS,
                        GJAHR LIKE BSIS-GJAHR,
                        BELNR LIKE BSIS-BELNR,
                        SHKZG LIKE BSIS-SHKZG,
                        BSCHL LIKE BSIS-BSCHL,
                        AUFNR LIKE BSIS-AUFNR,
                        HKONT LIKE BSIS-HKONT,
                        QSSKZ LIKE BSIS-QSSKZ,
                        DMBTR LIKE BSIS-DMBTR,
                   END OF DLC_BSIS.
Query as follows --
         SELECT BUKRS
                       GJAHR
                       BELNR
                       AHKZG
                       BSCHL
                       AUFNR
                       HKONT
                       QSSKZ
                        DMBTR FROM BSIS
                                  INTO TABLE DLC_BSIS
                                 FOR ALL ENTRIES IN IT_BKPF2
                                 WHERE BELNR = IT_BKPF2-BELNR
                                              AND BUKRS = IT_BKPF2-BUKRS
                                              AND GJAHR = IT_BKPF2-GJAHR.
IT_BKPF2 internal table having -- BUKRS - LT01
                                                     BELNR - 6400000061
                                                     GJAHR - 2009.
And in BSIS database table -- 3 entries are there for the above documnet.
But, in my internal only one entry has come for the same above document.
I think For all entries stmnt. is not running properly. But Why it's not running properly.??
What would be the reason..??
Thanks in advance....!!
Regards,
Poonam.

>
Poonam Patil wrote:
> Hello experts,
>           In my report program, I write one query on table BSIS.
>
>          Internal table declaration -
>
>        DATA : BEGIN OF DLC_BSIS OCCURS 0,
>                         BUKRS LIKE BSIS-BUKRS,
>                         GJAHR LIKE BSIS-GJAHR,
>                         BELNR LIKE BSIS-BELNR,
>                         SHKZG LIKE BSIS-SHKZG,
>                         BSCHL LIKE BSIS-BSCHL,
>                         AUFNR LIKE BSIS-AUFNR,
>                         HKONT LIKE BSIS-HKONT,
>                         QSSKZ LIKE BSIS-QSSKZ,
>                         DMBTR LIKE BSIS-DMBTR,
>                    END OF DLC_BSIS.
>
>          Query as follows --
>
>          SELECT BUKRS
>                        GJAHR
>                        BELNR
>                        AHKZG
>                        BSCHL
>                        AUFNR
>                        HKONT
>                        QSSKZ
>                         DMBTR FROM BSIS
>                                   INTO TABLE DLC_BSIS
>                                  FOR ALL ENTRIES IN IT_BKPF2
>                                  WHERE BELNR = IT_BKPF2-BELNR
>                                               AND BUKRS = IT_BKPF2-BUKRS
>                                               AND GJAHR = IT_BKPF2-GJAHR.
>
> IT_BKPF2 internal table having -- BUKRS - LT01
>                                                      BELNR - 6400000061
>                                                      GJAHR - 2009.
>
> And in BSIS database table -- 3 entries are there for the above documnet.
>
> But, in my internal only one entry has come for the same above document.
>
> I think For all entries stmnt. is not running properly. But Why it's not running properly.??
> What would be the reason..??
>
>
> Thanks in advance....!!
>
> Regards,
> Poonam.
include the buzei field in selection criteria i have faced the same situation earlier.
always select all the key fields.
varun

Gimp will not run properly

I just purchased a 24 inch Imac and Gimp will not run properly. I have the latest system updates and firmware. Gimp starts X11 and appears to load, but the only item visible is the Gimp menu, none of the tools. It shows as running in the dock.
If I try to open a graphic with Gimp, it loads but the graphic is not visible and only the Gimp menu is visible in the menu bar. It shows up as running in the dock.
It works fine on a G4 quicksilver. I have the latest version 2.2.11
Thanks,
Fran
IMAG INTEL Mac OS X (10.4)

Hello Francis,
Did Gimp ever load properly? On first load, it should have gone through an installer within X11. Also, I've noticed that my image windows start up hidden. There also may be a bug in which clicking on the Gimp app icon in the dock itself won't bring the windows forward, so you have to use the X11 icon instead. Try using Expose to show all windows in all applications to see if they've opened but sort of "off-screen."
It could be a bad installation, or it could be that somehow the toolbars and palettes, etc. in Gimp just never appeared. Check to make sure X11 is up to date as well. I'm currently running 1.1.3 with XFree86 4.4.0.

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just g

I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just get a message asking for the disc to be inserted. any ideas anyone?

Use the download version:
Download CS3 products
Mylenium

Captivate project not running properly on iPad

Hello,
I built a project using Captivate 7.0. When I published the project, I checked both the SWF and HTML5 boxes so the tutorial would run on an iPad. However, when I view the tutorial on the iPad, the tutorial does not run properly. The pages do not advance (even though, in Captivate, I have the slides advancing automatically - not on mouse clicks), all of the bullets on a slide do not appear, and the narration stops in the middle of a slide and does not resume.
Do you have any suggestions?
Thank you,
Sarah

Hi Joel,
I removed all bullet animations and re-published the project (I checked the "Force re-publish all the slides"). My tutorial runs on an iPad, without the slides hanging up. It appears removing the bullet annimations solved that issue. Thanks for the suggestion.
However, neither my music introduction on the first slide nor my narration on subsequent slides comes in. I confirmed I do not have "mute" on and that my volume is up. Also, I confirmed the sound works by running the tutorial on my desktop.
Do you have any ideas?
Thanks,
Sarah

Vz protect not running properly

I have the latest version, but it is not running properly (just keeps scanning).
How can I fix this? Should I uninstall and then reinstall? Is there a charge to do that?

hello lhill123, maybe that's an issue with hardware acceleration - first please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

I have bought a iPhone 4 , yesterday . I heard that iOS 7 is not running properly on iPhone 4 , so I have decided to upgrade it to 6.1.2 . Please help to do this.

I have bought a iPhone 4 , yesterday . I heard that iOS 7 is not running properly on iPhone 4 , so I have decided to upgrade it to 6.1.2 . Please help to do this.

YOU CAN'T.
If you upgrade your phone you can only upgrade to iOS 7 and that is it. You can only ever update to the lastest available software, which in this case is iOS 7. You either upgrade to this or not at all because you can't upgrade to anything else.

I defined custom action but it is not running properly.

Hi,
I defined custom action but it is not running properly.
I deployed in MII (System Management --> Custom Actions)
When i use it as an action in a transaction error below generated.
Errors
[ERROR]: STEP EXCEPTION (Custom_Action_0) : Item 'Custom_Action_0' is not an Action
[ERROR]: STEP EXCEPTION (Custom_Action_0) : Item 'Custom_Action_0' is not an Action
Custom action code is below.
package com.wipro.action;
import com.sap.xmii.xacute.actions.ActionReflectionBase;
import com.sap.xmii.xacute.core.ILog;
import com.sap.xmii.xacute.core.Transaction;
@author cemil.bozlagan
public class CustomAction extends ActionReflectionBase {
    private String strFirstInput;
    private String strSecondInput;
    private String strOutString;
    public CustomAction() {
        strFirstInput = "";
        strSecondInput = "";
        strOutString = "";
    @Override
    public String GetIconPath() {
        return "/com/wipro/action/resources/icons/CustomAction.png";
    @Override
    public void Invoke(Transaction trx, ILog ilog) {
        try {
            strOutString = strFirstInput + strSecondInput;
            // This varaible is defined in ActionReflectionBase class
            _success = true;
        } catch (Exception e) {
            _success = false;
    public String getFirstInput() {
        return strFirstInput;
    public void setFirstInput(String strFirstInput) {
        this.strFirstInput = strFirstInput;
    public String getSecondInput() {
        return strSecondInput;
    public void setSecondInput(String strSecondInput) {
        this.strSecondInput = strSecondInput;
    public String getOutString() {
        return strOutString;
    @Override
    public boolean isConfigurable() {
        return false;
How can i solve this problem?
Thanks.

Hi Cemil,
Pls check document, I hv sent to your mail.
May be it helps.
Regards
Padma

Background job not run properly

Similar Messages

Maybe you are looking for