Batch determination During Goods Issue

Greetings..
How to Active batch Determination WHile issuing the goods to Production.
I created Class and charachteristics. and assigned to materialmaster .
Now at the time issue i need that the system should ask the to check the Batch available in Stock with ther Shelf Life..as my charecteristics is shelf Life
How to do this bathc Determination.
Please GUide me with the Steps to be caried Out.
Thanks In advance...
Edited by: SAP PP on Apr 13, 2009 10:57 AM

Hi,
You can activate batch determination on the base of Goods Movement:
Batch Determination Process
Purpose
This process describes how you find suitable batches for a business transaction.Here are some examples of business transactions in different applications:
Business Transaction Application
Material withdrawal for production/process order
Internal material provision
Return delivery to supplier
Scrap/sample
Transfer posting
To configure this ,please find the details below:
Prerequisites
u2022 You must have assigned a search procedure to the business transaction. The search
procedure contains different strategy types that are relevant for the business transaction.
u2022 There must be a batch search strategy for one of the strategy types. See also Creating a
Batch Search Strategy
u2022 The selection class must contain at least one of the characteristics with which the batch
was classified.
Thanks,
AMIT
Logistics - General----> Batch Management -
> Batch Valuation -
>Valuation for Goods Movement in Inventory Management -
> Activate Batch Classification for Goods Movements in IM

Similar Messages

MPN Manufacturer batch determination during goods issue

I am from pharma industry and my business runs with batch management, MPN features.
Scenario:
I have 3 different finished product P1, P2 and P3. All three finished products use raw material R1.
But, I have restrcition like, when I am manufacturing P1 product I can only use R1 of batch from manufacturer M1.
For P2 material we can use R1 batch from manufacturer M2 only.
For P3 material we can use R1 batch from manufacturer M1 and M2.
Now, I have maintained the BOM CS02 batch classification for three differ FGs P1, P2 and P3 with relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
In COB2 T-code I am mainmtaining strategy type CO02 - Order type/Plant/Parent material with child relation ship. Here also, I am maintaining relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
Now, when I am creating process order in COR1, I am getting in case of P1 order R1 material batch determination only batches from M1 manufacturer.
Same as for P2 material process order R1 material only batches for detrmination from M2 manufacturer.
Same as for P3 material process order R1 material batch determination option from M1 and M2 only.
Now, if I don't go for batch determination through Process order and in stead of that if I want the batch determination during goods issue MIGO 261 movement against order, the above manufacturer level control we can't put.
As in MBC2 T-code, we have standard batch determination and search strategy for material, plant and movement type.
But, here we can't maintain any parent child relationship.
Now, can you please suggest how I can control manufactuer batch detrmination as per above strategy during Migo goods issue.
Through any standard settings we can do or, any exits required?
Gurus please suggest!

Dear
You can do this by using FM CO_WB_BATCH_DETERMINATION or VB_BATCH_DETERMINATION function module.
here you can sort the batches and compare the Batch results with the batch search strategy.
Regards,
R.Brahmankar

Automatic Batch Determination during Goods issue of Production Order

Hi,
Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
Thanks and Regards
Enrico

Dear Enrico
It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
Configuration Required for your above issue are as follows :
1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
Create Condition Tables
Create Access Sequences
Create Strategy Types
Batch Search procedure definition
Batch Search procedure allocation and check activation
Define Selection classes
Define sort rules
Maintain Batch Allocation Strategy Number Ranges
All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
Refer the below link for your farther reference :
http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
Hope this will be useful
Regards
JH
Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM

Automatic batch determination during goods issue

Hi,
We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction. Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
Thanks & Regards,
N. Laxman

Dear Laxman,
Check these links,
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
Automatic batch determination
Re: how to make the batch determination process automatic
Regards
Mangalraj.S

Override consignment price determination during goods issue process

Hi ALL,
My requirement is that User is asking want to override consignment price determination during
goods issue process. Is there any BADI/User Exit or Enhancement spot which can override the price value and in the
database level during Goods issue.
If yes provide me the enhancement details and where I can implement.
I will very thankful to you all if I get your valuable input.
Regards
Subhasis

Dear Laxman,
Check these links,
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
Automatic batch determination
Re: how to make the batch determination process automatic
Regards
Mangalraj.S

Batch Determination While Goods Issue

How To Active batch Determination at the time of issue the goods
I have done following SPRO setting .
Strategy type --> YB01
Inventory managment Search Procedure --> YB001
Allocation IM Search Procedure -->> 261assigned to YB001 along with Active "Check batch"
In MBC1....for Search Startegy YB01 , for combination of Movement Type/Plant/Material ,materil assignement made as
material 40100
No. batch -999
Changed Allowed : Check
Uom : B
Mproposal : Active
Material Master of raw Material 40100
Material Master batch Management tick active
Classifcation view : Class As Shelf life
Characheirstics :Remaining Shelf Life
Now i have cretaed prodcution order of 10 qty ..
I have Four Batches With Differnt Life is available in Stock...
Now i want to see this Four batch at The time of Issue so that i can select one of the batch for issue..
Right now i m not getting Batch determination ..
What else i have to do ...
Please Guide..

Dear,
Have you created the sort rule in ACU70 with LOBM_VFDAT?
Have you assigned the sort rule in MBC1?
Also check Implementation Guide for R/3 Customizing (IMG)-- Logistics u2013 General-- Batch Management--Batch Determination and Batch Check -->Batch Search Procedure Allocation and Check ActivationAllocate IM Search Procedure/Activate Check
Assign for 261 mov type - YB0001.
Same need to assign in OPL8 also please try and come back.
Regards,
R.Brahmankar

Outbound delivery output not re-determined during goods issue?

Hi,
i'm currently in the process of testing an SAP upgrade from 4.6B to ECC 6.0, and have encountered the following problem: one of our outbound delivery output types (LD00) is supposed to print out at goods issue (which happens in VT02N, by the shipment).
In 4.6B, the output determination procedure correctly triggers at goods issue, however, in 6.0, it doesn't. Re-opening the delivery in VT02n causes the LD00 to be determined after all, but by then it's too late.
Does anyone have the slightest idea why the output determination isn't re-evalutated at goods issue?
regards
Rob

Hi,
Perhaps you are using an own VOFM subroutine to do filters if the output works or no. You create this subroutine with tcode VOFM, and after some steps you create an include in a report of SAP (SAPL). You can check if you are setting a VOFM in SM34/VVC_T683_XX_E1 for the output scheme. Sometimes is necesary to run this report to create and activate the report sapl, if no, when the abap call the subrutine, SAP doesn't find (perform * if found)
For VOFM there is a good document in google, format PDF, search it with the string inside vofm ext:pdf.
I hope this helps you
Regards,
Eduardo

Stock determination during goods issue

Hi expert,
our client has one requirement in such a way whem they issue the material , at that time they could see batch wise stock
and acordingly they could issue the material.
i have assigned stock determination rule and group to material master as well as in movement type.
even then this is not triggering.
Regards,
Santosh

follow the link
http://help.sap.com/erp2005_ehp_04/helpdata/EN/25/283aac4f7811d18a150000e816ae6e/frameset.htm
navigate in the menu on the left.
SAP explains here how to setup search strategies

Batch creation during goods issue to order

i had a scenario where 4 production lines are used to produce fg material,in final operation all material produced in different lines are mixed . i am using different grades of raw material( single raw material) in different ratio in each line . during adding raw material in the operation batch number is recorded .
in each line 1 ton of material is produced for 1 hour , i had a production order of 100 tons i had to produce 25 batches ( each batch produce 1 ton ) in each line , and each time batch number should be recorded. if raw material from 1st operation enters to 2nd operation in 1st line new batch is again added in 1st operation this process continues un till production order quantity is reached. how to map this scenario in sap.
Thanks

Hari,
I am not sure if I understood your requirement exactly. But in the first pass did you check WIP batch functionality?
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ff2779-f9d3-2b10-9dab-e9d84c5953c5?overridelayout=t…

Automatic batch determination during order confirmation

Dear experts,
We have defined automatic batch determination using stock determination (OPJ2, for plant/order type, operation 3, check column BD).
This works fine, only problem is that now both backflushed and non-backflushed materials get batches assigned, but for the non-backflushed we do not want this.
Does anybody have an idea how to achieve this?
Edited by: ton teuns on Jun 8, 2011 9:01 AM

Dear Ton,
As you have mentioned non-backflushed materials,it means the backflush indicator is not set in the material master or else in
the work center or in the production order.
So assuming the indicator is not how are you able to see these components during the order confirmation?
So first remove the backflush indicator so that it means those components are manually issued and check these threads to
explore more,
Automatic batch determination during goods issue
Regards
Mangalraj.S

Batch determination based on fifo during goods issue

Hi All,
My client requirement is that system should propose automatic batch during goods issue based on goods receipt.
I have activated batch wise split valuation.
I have maintained characterstics with MCH1 table and HSDAT.
Assigned to class and class is assigned to stratergy type.
Created sort sequence and sort rule ascennding.
Assigned this to stratergy type.
Maintained condition record also.
During goods issue to production system is not proposing the batch based on gr date.
System is not stopping me while making goods issue with other batch.
Please guide to fix the above issue.
Regards,
Venkatesh

Split valuation has nothing to do with this problem.
I hope you do not just require the sequence for physical goods issue to be FIFO because your year end valuation will be FIFO method, as this is not necessary for FIFO valuation.
IMG > Ligistics general > batch managment > batch determination > Allocation of batch determination schema and activation >...
here you set the box for batch check active, which means if a batch is entered manually then this batch is checked against the batch determination and an error is issued if the wrong batch is entered.

Auto populate of vendor in partner Tab during Goods issue- Batch management

Dear All,
I there a possibility of populating the Vendor (in partner tab) during goods issue (MVT 601,201, 240 etc).
Provided the material is batch managed.
Thanks and Best Regards
W.Raghuram

What I feel is that u have to maintain the Batch Characteristics then it is quite possible.
In std In Partner tab I feel not possible. Not sure other expert may guide you.
Biswajit

Account determination in Goods issue

Hi Experts,
Is it possible to determine different accounts during goods issue based on customer accounting group?
Regards
Federico

Hello,
customer account assignment group will come into picture in revenue account determination only (VKOA), that too when the invoice is created through sales.
At the time of goods issue the accounts will get updated based on the G/L accounts maintaned for GBB in OMWB.
Prase

Help needed in Automatic Batch determination during Delivery

Hello gurus..
Can anyone point me in the right direction. I am trying to trigger auto batch determination during delivery creation based on available batches. thank you
If any can give me the config that goes with it, that'll be great

Steps to configure Batch Management
1) Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
2) Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
3) Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements
4) Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics
5) Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
6) Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
7) Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
8) Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
9) Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
10) Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
11) Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
12) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
13) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
14) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
15) Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
16) Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
17) Batch Determination Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
18) Batch Determination Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
19) Batch Determination Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
20) Batch Determination Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
21) Batch Determination Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB
thanks
G. Lakshmipathi

Batch determination during MIGO

Dear all,
This is question regarding the Sort rule used during Batch determination during MIGO (GI).
Below are what i've done:
1. Maintain Batch search strategy via SPRO
2. Maintain Batch search condition records via MBC1. Here I maintain the sort rule = ZSORT.
FYI, sort rule contains characteristic fields: (1)BATCH_CREATION_DATE, (2)BATCH_NUMBER.
3. Performing GI via MIGO, in Batch determination screen there is a column showing "Characteristic sort." From here, i can view how the characteristic fields and its value being sorted.
Problem arise, in above screen, i can only see (1)BATCH_CREATION_DATE only display in column "Characteristic sort.". Missing of characteristic field (2)BATCH_NUMBER.
Could you please comment on what went wrong? Please comment
This is the setting used for BATCH_NUMBER (TCode CT04):
Basic data
Chars group = BATCH
Status = Released
Format = Char
Number of Char = 10
Value Assignment = Single value
Values
No maintenance
Addnl data
Table name = MCHA
Field name = CHARG
Procedure for value assignment = Not Ready for input
Restriction
No maintenance

Dear all,
I've got my issue solved. There are 2 areas i applied fixes:
1. Sort rule's characteristic field should come from the same class as Selection criteria (MBC1)
2. Sort rule's characteristic field's setting in CT04, it should coming from table field that declared in tab "Addnl data".

Batch determination During Goods Issue

Similar Messages

Maybe you are looking for