Automatic Batch Determination during Goods issue of Production Order

Hi,
Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
Thanks and Regards
Enrico

Dear Enrico
It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
Configuration Required for your above issue are as follows :
1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
Create Condition Tables
Create Access Sequences
Create Strategy Types
Batch Search procedure definition
Batch Search procedure allocation and check activation
Define Selection classes
Define sort rules
Maintain Batch Allocation Strategy Number Ranges
All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
Refer the below link for your farther reference :
http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
Hope this will be useful
Regards
JH
Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM

Similar Messages

Automatic batch determination during goods issue

Hi,
We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction. Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
Thanks & Regards,
N. Laxman

Dear Laxman,
Check these links,
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
Automatic batch determination
Re: how to make the batch determination process automatic
Regards
Mangalraj.S

MPN Manufacturer batch determination during goods issue

I am from pharma industry and my business runs with batch management, MPN features.
Scenario:
I have 3 different finished product P1, P2 and P3. All three finished products use raw material R1.
But, I have restrcition like, when I am manufacturing P1 product I can only use R1 of batch from manufacturer M1.
For P2 material we can use R1 batch from manufacturer M2 only.
For P3 material we can use R1 batch from manufacturer M1 and M2.
Now, I have maintained the BOM CS02 batch classification for three differ FGs P1, P2 and P3 with relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
In COB2 T-code I am mainmtaining strategy type CO02 - Order type/Plant/Parent material with child relation ship. Here also, I am maintaining relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
Now, when I am creating process order in COR1, I am getting in case of P1 order R1 material batch determination only batches from M1 manufacturer.
Same as for P2 material process order R1 material only batches for detrmination from M2 manufacturer.
Same as for P3 material process order R1 material batch determination option from M1 and M2 only.
Now, if I don't go for batch determination through Process order and in stead of that if I want the batch determination during goods issue MIGO 261 movement against order, the above manufacturer level control we can't put.
As in MBC2 T-code, we have standard batch determination and search strategy for material, plant and movement type.
But, here we can't maintain any parent child relationship.
Now, can you please suggest how I can control manufactuer batch detrmination as per above strategy during Migo goods issue.
Through any standard settings we can do or, any exits required?
Gurus please suggest!

Dear
You can do this by using FM CO_WB_BATCH_DETERMINATION or VB_BATCH_DETERMINATION function module.
here you can sort the batches and compare the Batch results with the batch search strategy.
Regards,
R.Brahmankar

Batch determination During Goods Issue

Greetings..
How to Active batch Determination WHile issuing the goods to Production.
I created Class and charachteristics. and assigned to materialmaster .
Now at the time issue i need that the system should ask the to check the Batch available in Stock with ther Shelf Life..as my charecteristics is shelf Life
How to do this bathc Determination.
Please GUide me with the Steps to be caried Out.
Thanks In advance...
Edited by: SAP PP on Apr 13, 2009 10:57 AM

Hi,
You can activate batch determination on the base of Goods Movement:
Batch Determination Process
Purpose
This process describes how you find suitable batches for a business transaction.Here are some examples of business transactions in different applications:
Business Transaction Application
Material withdrawal for production/process order
Internal material provision
Return delivery to supplier
Scrap/sample
Transfer posting
To configure this ,please find the details below:
Prerequisites
u2022 You must have assigned a search procedure to the business transaction. The search
procedure contains different strategy types that are relevant for the business transaction.
u2022 There must be a batch search strategy for one of the strategy types. See also Creating a
Batch Search Strategy
u2022 The selection class must contain at least one of the characteristics with which the batch
was classified.
Thanks,
AMIT
Logistics - General----> Batch Management -
> Batch Valuation -
>Valuation for Goods Movement in Inventory Management -
> Activate Batch Classification for Goods Movements in IM

Batch and Quantity display during goods issue to Production order

Hi
Most of our raw materials used in production order are batch managed.While issuing goods to production order(TC MIGO).
While issuing goods ,when we issue we can see batch number only in the F4 help.At times the displayed batches may have ZERO stock.To prevent the wrong batch entry ,the end user is forced to open another screen in MMBE or MB52.
Is there any way ,where in both Batch and the quantity is also displayed in F4 help.
Thanks in Advance.
Surya

Hi All
my client have same problem. is it possible guide me how can prevent from to show Batch that has not Qty. when we do goods issue?
Regards
R.Tr

Automatic batch determination during order confirmation

Dear experts,
We have defined automatic batch determination using stock determination (OPJ2, for plant/order type, operation 3, check column BD).
This works fine, only problem is that now both backflushed and non-backflushed materials get batches assigned, but for the non-backflushed we do not want this.
Does anybody have an idea how to achieve this?
Edited by: ton teuns on Jun 8, 2011 9:01 AM

Dear Ton,
As you have mentioned non-backflushed materials,it means the backflush indicator is not set in the material master or else in
the work center or in the production order.
So assuming the indicator is not how are you able to see these components during the order confirmation?
So first remove the backflush indicator so that it means those components are manually issued and check these threads to
explore more,
Automatic batch determination during goods issue
Regards
Mangalraj.S

Override consignment price determination during goods issue process

Hi ALL,
My requirement is that User is asking want to override consignment price determination during
goods issue process. Is there any BADI/User Exit or Enhancement spot which can override the price value and in the
database level during Goods issue.
If yes provide me the enhancement details and where I can implement.
I will very thankful to you all if I get your valuable input.
Regards
Subhasis

Dear Laxman,
Check these links,
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
Automatic batch determination
Re: how to make the batch determination process automatic
Regards
Mangalraj.S

Excess goods issue against Production order

HI PP Gurus,
My requirement is to block excess goods issue of raw material against a production order.
Ex. Production order qty = 10 , For producing 10 Finish goods i require 10 raw material. When i do confirmation via CO11N the system automatically shows GR & GI Values in Goods Movement tab. there i change GI value of RM from 10 to 20 the system takes the value and does the GR & GI.
My requirement is that the system should not do GR & GI if the GI value is more than that is calculated at the time of creation of Prod. Order.
Thanks in Advance,
Deven

Hi,
Rstriction of excess goods issue against production order is not possible in standard setting.
For achiving this you have to go for User exit.
The logic should be
In MIGO check mvt. type 261
Pass the order through table RESB and select all the components with quantity.
Capture the header material of order and use this as input along with the order creation date, plant and BOM application to explode function module CS_BOM_EXPLOSION.
THis will give you the BOM components which were valid at the time of order creation.
Now compare these BOM components with the components from RESB with quantity.
Here conditions will come in picture
If quantity is exactly matching then GI will be possible
or if you want to keep tolerance limit say for 10% then accordingly you can map the condition.
Regards
Amit Parkhi

Goods Issue on Production Order

Dear PP Gurus,
The requirement is,
while doing Goods issue for Production order of X material, during operation Confirmation ' CO11 & CO12' , System should allow only BOM components of X and restrict or give warning message for goods movement of other materials.
I tried to use available User Exit for PP Orders but none of them gives desired output.
Can nybody guide me.
Thnx in advance.

In customizing materials management -
> Inventory Management and Physical Inventory->Goods Issue / Transfer Postings make--> Set Up Dynamic Availability Check
For 261 movement type set Dynamic Availability Check as "F"
and then in omcq transaction M7 362 message set "E"
This customizings prevent good ıssue more than reservation quantity

Good issue to Production order - Allows it in back posting date

Dear all,
Good issue to Production order ( 261 Movement ), allows us to post the component in back dated eventhough stock is not avaible on that date.
Example - Component stock on date 10.02.2010 = Zero , I made it Good receipt on date 18.02.2010 and now stock is available on date 18.02.2010.
Now GI to Production it allows the qty on current and back Posting date also , I want control on date with error message. It should not allowed the GI for back date from 18.02.2010.
Because of this our MB5B report shows the negetive issue qty if i post in back date.
Waiting for reply
Thanks and Regards,
Saurabh

Hi SAurabh,
PLease check whether Negative Stock is allowed for the valuation Area (plant).
GOTO >> SPRO >> MM>> Invetnroy management and physical inventory >> Goods issue/ Transfer Posting >> Allow Negative stock.
Untick the Negative stock allowed for your valuation area (PLant)
Regards,
Pravin

Error while doing Good Issue for Production Order using BAPI

Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date   = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind   = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant     = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = zptp_s_rf_migo_261-aufnr
    IMPORTING
      output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header       = gs_header
      goodsmvt_code         = gs_gmcode
    IMPORTING
      goodsmvt_headret      = gs_headret
    TABLES
      goodsmvt_item         = gt_item
      goodsmvt_serialnumber = gt_serial
      return                = gt_return.
Thanks in Advance.

hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM

How to restrict reversal of Goods issue against production order.

Dear All,
How to restrict reversal of Goods issue against production order if production order status is CNF or DLV.
i want that user can not reverse the goods issued against production order, if they want to do so, then user has to reverse the GRN and reverse the GI then only.
Please suggest the solution.
Regards,
Sandeep Dhruve

Hy Sandeep,
You have to use User Exit for this.
The following enhancement is available for production orders:
o   CCOWB001    User exit for modifying menu entries
You can use this function module to deactivate menu entries or
functions. The locked functions can then no longer be executed by the
user.
The enhancement CCOWB001 contains the following components:
Function exit
o   EXIT_SAPLCOWB_001   Good movement: Deaktivate functions
      Display documentation
Regards,
Dhaval
Edited by: Dhaval Choksi on Aug 22, 2008 3:01 PM

How to stop excess goods issue against production order from MB1A

Hi Gurus,
In our organization goods issue against production order is done by using MB1A T.Code manually.Due to this reason sometimes excess quantity of RM issue against production order.Now I want to stop the excess goods issue against production order by using MB1A but I want to mainatain a certain tolerence.
Please advice what to do?
Regards
Nirmal

Hi ,
Use user exit MBCF0002
This is called when u do goods movement for production order.
Regards,
Vishal

Automatic batch determination during transfer posting. Issue.

Hi All,
Please could anyone advise to solve the following problem with automatic batch determination:
1. When delivery is created for sales order, SAP automatically assigns batch number.(SLOC 1)
2. From time to time there is a need to transfer the same material number, which is on delivery to another sloc2.
3. Using Mb1b tcode i do transfer posting from SLOC1 to SLOC 2. In batch field i put * or (**) for automatic generation. (movement 311).
The problem appears here, when SAP automatically assigns the same batch to transfer posting which was assigned to delivery (p.1).
So that after transfer posting done, there is no required quantity left in batch needed to do a goods issue for delivery. So goods issue is not possible because of that kind of transfer posting.
Do you have any idea, how to manage this, and to restrict SAP choosing the same batch which was assigned to delivery.
Thank you,
Kind Regards.

There are 3 strategy types setup in MBC3 (1, 2)
ME01, ME02 which are standart SAP.
And one started from Z* with settings below:
Plnt
Valid From
Valid to
Delet.Ind.
No. split
Cpl.change
OnlineBdet
UnitofMeas
MProposal
Selection
Sort seq.
AAAA
04.01.2006
31.12.9999
099
X
B
001
X
X
|
Date of last goods receipt
ascending
Kind Regards,
Andrey

Help needed in Automatic Batch determination during Delivery

Hello gurus..
Can anyone point me in the right direction. I am trying to trigger auto batch determination during delivery creation based on available batches. thank you
If any can give me the config that goes with it, that'll be great

Steps to configure Batch Management
1) Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
2) Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
3) Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements
4) Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics
5) Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
6) Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
7) Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
8) Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
9) Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
10) Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
11) Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
12) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
13) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
14) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
15) Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
16) Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
17) Batch Determination Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
18) Batch Determination Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
19) Batch Determination Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
20) Batch Determination Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
21) Batch Determination Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB
thanks
G. Lakshmipathi

Automatic Batch Determination during Goods issue of Production Order

Similar Messages

Maybe you are looking for