Best exporting setting for web

What will be the best exporting setting from FILE>EXPORT> to share a HD projet on the web.
Jean

Convert it to h.264.
Try this:
File - Export - QT Conversion...
Make sure QT movie is selected and where it says default... change it to Broadband High.
Then go into the OPTIONS button and change the size to reflect the 16:9 aspect ratio...
That will give you the quality you want I'm sure.
As for # megs... well -- try a smaller SIZE option and then force it 2x or 1.5x from your web page.
Good luck,
CaptM

Similar Messages

  • What is the best export setting for video on blogger

    What is the best export setting for video from premeire to blogger.com or blogspot.com

    I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

  • Best export setting for HD Video

    I am currently woriking with Final Cut Express HD and I am new to the whole HD experience. I would like to know what is the best exporting setting for FCE to be copied on DVD and viewed. I am currently working on a wedding project with a JVC Pro HD camera GY-HD110 720p. Any help will be appreciated. Thank You.

    This is a question better asked in the FCE forum located at the link below:
    http://discussions.apple.com/forum.jspa?forumID=936

  • Best export type for web viewing

    I just bought a Eyetv and recoreded me playing halo 2 on my 360. i was wondeirng what the best export for posting something on youtube would be. the choices i have are, quicktime movie, mpeg-4, h.264,divX avi, windows media, AAc audio and apple lossless audio. i was just wondering what the best is to post videos on youtube. i tried one but the quality didnt turn out so well once it was on youtube but before that it was clear. is it just youtubes uploads?

    i think it is just youtube decreasing the quality so it will stream quickly ... i always use quicktime movie though ... no particular reason for that though!

  • CS4: Best export settings for web delivery?

    Greetings, all!
    I recently upgraded to working with HDV footage in CS4 from working with SD footage in Elements 3, and have been struggling a bit with getting the best quality export from CS4/AME for delivery over the web.
    I'm most concerned with exporting a best quality master that I can then transcode to m4v, flv, etc.  So far, the best luck I've had is with a H.264 .mp4 export, but it's still not as clean as I'd like to see.  I've also read that exporting as a Quicktime animation provides excellent results, but I'm having issues with Quicktime on my new PC (error -43 file missing, for one thing) and I've read a bunch of posts here that advise staying away from QT whenever possible.  I'm working mostly with NTSC HDV 1440x1080 60i footage from a Canon XH-A1s, with some NTSC HD 1920x1080 30p and 24p footage from a Canon T2i thrown in sometimes.  I don't mind shrinking my export down to 1280x720, but for my master I really want the cleanest possible video.
    Any tips would really be appreciated.
    Thanks!

    Anybody have any tips???
    Here are the specs I have been using so far.
    Format: H.264
    NTSC, 1280x720, 29.97 [fps], Progressive
    AAC, 128 [kbps], 44.1khz, Stero
    VBR, 2 Pass, Target 6.00, Max 8.00 [mbps]
    Widescreen 16:9
    Profile: high
    Level: 5.1
    What I get is a file that's about 250megs for a 5-minute video that looks pretty clean.  What I'm really looking for is more like a 2.5gig file that's super clean.  Back when I was shooting SD, I would export an .avi file as my master that would run about 1gig or so for a 5-minute file.  I'm looking for a similar workflow now that I'm working in HD.
    Any ideas?

  • What is the best export setting for burning a dvd?

    I am trying to export my senior thesis to a DVD, I've never burnt a DVD before and am using Adobe Premiere cs6. 
    I used a Canon7D 24fps to film and want the best quality of video and audio possible. 
    ALSO, after I've exported it, are there any other steps I need to take before burning it to a DVD?
    Please help!

    The best quality will be using an x264 encoder in CQ mode to create a Blu-ray.
    Next best is exporting using an H.264 Blu-ray preset for creating a Blu-ray.
    After that, exporting a lossless file for MPEG 2 conversion using the free HC Encoder using CQ mode, which will end up on a DVD.
    Last in the quality lineup, export using an MPEG2-DVD preset, changing the Min, Target and Max bitrates to 5, 7 and 9 respectively.
    Avoid Dynamic Link.

  • Best export setting for iMovie photo slide show for use on Mac or PC

    I've searched, no clear answer.... Simply trying to determine the best settings in iMovie 11 to export slideshow (no video, just stills using jpegs) that will ultimately be used primarily for viewing on a computer screen..either Mac or PC. Goal is highest quality..don't care about size.
    Am I even asking this question right?
    thanks!

    The presets are all h.264. They are pretty good. However, if you know what you are doing, you may get better results using export to QuickTime. It is not likely to look any better, but you may be able to get a smaller file size that looks about the same.

  • Advice of best export setting for HD

    Hello.  I am editing with CS4 and did my first HD project.  Project setup was fine, used Sony XDcam EX native MP4 footage that was shot HQ 1440x1080i.  Didn't show red render line in PRemiere so I believe the new sequence settings are correct (XDcam HD, 1080i (60i), 1440x1080, HD anamorphic 1.333, 29.97).   In Premiere the footage looks supberb, I just had to interpret footage as HD 1080 anamorphic in the Premiere bin so it displayed to the right aspect ratio.
    When I export with Media Encoder I find it looks compressed (softer) and on pans is blurs a bit with what looks like scan lines.  Motion stabilizer was shot off when I shot, so thats not the issue.  How do I get my HD project to encode to mpg2 and still retain the HD qualities.  I've tried so many setting combinations in Encoder. Here's an example:
    HDTV 1080p 29.97
    NTSC
    quality 5
    1440x1080
    29.97fps
    none (progressive)
    wide 16:9 (1.333)
    profile: main
    level: high
    bitrate: min. 8.33, target 15, max 18.5
    160 MB file size (sample 1 min 30 second clip)
    What is the recommended bit rate that most people can play back on their computers / DVD player?  Is it just not possible to get the quality unless you go BlueRay? What am I doing wrong?  Is encoder improved in CS5?
    Or should I be recommending a different playback format to clients?
    I'm lost and can't find the answers.  Thanks,
    Christine Z

    Christine,
                    You are getting very mixed up here or at least the language of your post is confusing.
    Regardless of what flavour of HD you shoot and edit in, compressing for SD DVD involves resizing and effectively 'downrezzing' your footage so it will never look as good as HD. In PAL land where I live SD DVD is 720*576, NTSC is I believe 720*480. So to compress something to watch on a DVD player you want to be using those dimensions to begin with - there is probably a DVD preset that does that.
    If, instead, you are talking about delivering to the client as some other file such as H.264, Flash or WMV then I would still down rez just to make it playback better - a 1440*1080 WMV wont play nicely on most PCs.
    The settings you state below, by the way, look more like those you'd use for HD DVD or Blu-Ray.
    In terms of using the Media Encoder in CS4, if it's any consolation, I've never got a decent HD to SD conversion out of it.
    Finally the quality of DVD or other file playback can vary enormously depending on the monitor so check it on a couple of others and if it's a DVD, try it on a TV.
    Maybe post exactly what you're trying to achieve and I'm sure others will chip in.

  • Best export setting for Final Edit Master with AVCHD

    Hey Guys,
    I have been editing AVCHD footage shot from the Panasonic TM700 cam, footage shot in 1080p 60p.  After I have finished my edits and I want to render out a MASTER film that I can use in multiple fronts if I need, what is the best setting to render out to?
    I have a friend in the compression biz, and he tells me to render out to mpeg2 main concepts codec at 50Mbps setting, your thoughts?  In this setting I cannot render out at 59.94, only 29.97 or 30.  What should I do?
    Chris

    The best Master will be something lossless, something that doesn't degrade the image any further.  That leaves out all MPEG options.
    You can go Uncompressed, or install the free Lagarith or UT codecs on your system.  They're lossless codecs, so they will compress it to make a smaller file than full Uncompressed, but without any loss of quality.
    From there, you can use that to transcode to any other format you like.

  • Best export setting for video taken with an iPhone 4?

    Whats the best way to do it and keep all the quality? Any presets i could have?

    These work perfectly for the IPhone 3 so i do not see any reason why the should not give the same result in 4.
    Just copied them from CS5.

  • Best Export Setting for TV 1080 with constant FPS

    1080 23.976fps  DSLR footage
    Coming from Final Cut Pro,  I would export a ProRes 1080 mov file for my TV.  This would give me a high quality playback.
    I have experimented with several export options in PP 6 and noticed choppy playback on my TV.  Upon closer inspection, the FPS appears to be changing with each frame. 
    What settings do I need for a constant 24fps with a high bitrate ?        

    4 Hours later, I am still waiting on the export of a 10 minute HD timeline.   The clips all have Magic Bullet on them but that's about all.    There must be a quicker workflow for this ?  
    My Final Cut workflow was the following...
    Export a 5-10 minute ProRes HD Sequence takes about 5 minutes!   I then open theProRes mov file and convert to H264 with a smaller dimension. I use quicktime player to make this conversion.  This takes me no more than 1 hour.   Total export and conversion with Apple's Final Cut averages about 1 hour and 20 minutes.

  • Best export setting for hdv

    I have some HDV footage that has already been loaded onto my system but I want to convert the footage to a more manageable format so that i can make data disks and share them with people. I also don't want to edit with HDV but converting it to DVCPRO, which I've heard is the best file type to convert it to, takes up way too much space. Any suggestions?

    To share to SHOW or to share to EDIT? DVCPRO HD has a higher data rate than HDV, but like HDV unless people have FCP installed on their system they will not be able to see the footage. Those codecs only come with FCP.
    To VIEW...H.264.
    Shane

  • Best QT export setting for istockphoto?

    Hi.
    I want to export my footage using PPro CS5 for uploading onto istockphoto.com.
    The required format is QuickTime (Photo-JPEG).
    This is the source summary:
    1440x1080 (1.3333), 29.97fps, Upper
    (was shot with Sony AX2000)
    Does anyone know the best export setting for this footage?
    I tried this...
    Format:QT
    Preset:Custom
    Codec:Photo-JPEG
    1440x1080
    29.97fps
    Upper First
    Aspect: HD Anamorphic 1080 (1.333)
    Then, the exported video looks vertically streched...
    What am I doing wrong?
    Please help.
    Thank you!
    Kitty_Kai

    You're probably doing nothing wrong.  Many players will not unsqueeze the footage automatically, you have to tell it to do that with a keypress or menu setting.

  • What is the best export setting from QuickTime Pro 7 for standard DVD

    I have several AVI movies I took and want to import them into iMovie, so I can create a DVD that will play in any DVD player or computer. (Along with a bunch of pictures.)
    Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
    I have export them using *_QuickTime 10_* and QTP7 to *MOV, MP4, & M4V* and the output is *+bad bad bad+*.
    I have tried both export and save-as. Neither has done a good job.
    The internal information of the AVI movies are: (as reported by QT)
    Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
    I have used several settings with not much luck including:
    AAC, Stereo (L R), 44.100 kHz, MPEG-4 (Perian), 640 x 480, Millions
    MPEG-4 Video, H.264
    Should I be using a better application then QuickTime?
    Is there a way to just use iDVD with the original AVI movies?
    These are wedding movies and pictures that people are waiting for.

    Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
    That depends on your specific work flow and the codec(s) involved. Generally speaking, if the file plays in the QT Player and is "conversion" compatible, then the file can be added directly to iDVD (i.e., unlike iMovie '08/'09/'11 which requires the file to be "edit" compatible with QT).
    I have export them using QuickTime 10 and QTP7 to MOV, MP4, & M4V and the output is bad bad bad.
    The quality of your output file will depend on a number of things: primarily the quality of your source file, the efficiency of the target codec, and the specific settings used. (About which you did not elaborate.) The rule of thumb here is that your output will never be better than your input and each re-comprssion of the data has the potential to degrade the quality to some degree.
    I have tried both export and save-as. Neither has done a good job.
    The "Export" option re-compresses the data while the "Save As..." option only places the original data in an MOV file container. So if this output is "bad, bad, bad," then I suspect your source file(s) are not of high quality to begin with. (This seems to be confirmed by the very low audio sampling rate which implies the video data rate was probably also low to conserve file storage space.)
    The internal information of the AVI movies are: (as reported by QT)... Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
    The basic codecs here appear to be both playback and conversion compatitible with QT (other than the very low sampling rate which some QT apps may not like). Thus, if your work flow is to simply burn DVDs that can be played on commercial players, the AVI could most likely be dropped to iDVD for authoring. On the other hand, if you are editing in a recent version of iMovie, then that app may not like the AVI file container. In this case, the best quality you can likely expect would be to use the "Save As..." option to place the data in an MOV file container and import to iMovie.
    Unfortunately, editing in iMovie '08/'09/'11 is done "by reference" which means your output file will be created by exporting the impoted source data to another compression format. The default would be H.264/AAC which is a highly compressed format which in turn would be re-compressed again by iDVD to multiplexed MPEG2/PCM content further reducing quality by using a less efficient video codec. My recommendation for export from iMovie in this case would be AIC/Linear PCM. (I.e., to export your edits to the Apple intermediat video codec using the original file size and frame rate with just a bit of "sharpening" and using 16-bit/48 kHz Linear PCM audio (which is what will be used to create the DVD).
    Should I be using a better application then QuickTime?
    How much are you willing to spend?
    Is there a way to just use iDVD with the original AVI movies?
    Yes. Simply create a new SD project, select your theme, drop the compatible AVI content to the appropriate "drop" area(s), add photos as desired, preview the results, and author the DVD if/when satisfied.

  • Best export settings for video for web

    Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

    For now, it would be on my own website or a clients website. But there may
    be another possibility, I have a client that already has some videos
    available for viewing on their website, looks like they are YouTube videos
    that play on their site, and there is an option to "Watch on YouTube". So I
    guess I would love some recommended export settings for a straightforward
    video clip on my website, and if I need to explore the YouTube preset in
    Premiere, let me know. Thank you, I really appreciate your answers and
    help!!

Maybe you are looking for