BizTalk 2013 SFTP Adapter Dynamic SFTP send port exception: Open remote file for write error

I am using BizTalk 2013 SFTP adapter. I defined a Dynamic One-Way
send port on BizTalk server administration.
Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
 Server stack trace:
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker.OpenRemoteFileWrite(String fileName, Int32 fileOffset)
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpFileWriterStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
 Exception rethrown at [0]:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
 Exception rethrown at [1]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result)
MessageId:  {926F44F2-9180-4B33-96FF-9E4CBC459382}
InstanceID: {36A50A7F-63C4-48D9-903D-A33C85DDAE36}
Can you please assist with explaining why are we getting this exception?
Thank you for your help.

Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Hi Yaeli1,
From the error message above,  please check the permission for file writing , it seems that this issue is related to access permission.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

    Hello, 
    We have a requirement to connect SFTP secure site with the private key and polling files.   Initially I have
    tested BizTalk Server 2013 SFTP Adapter receiver Port using  Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
    However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
    did not poll any files from SFTP Site.  I added only one file to SFTP Server ( 145 kb file) for testing purpose.
    However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
    I could not find any errors in Event viewer also.  I can download\upload file using WinSCP tool .
    So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter  is also working find
    without any issues for Client SFTP Site.
     This is the configuration on SFTP Receive Adapter
    This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool. 
    <o:p></o:p>
    Appreciate your help on this.<o:p></o:p>
    Thanks<o:p></o:p>
    PrabathD<o:p></o:p>

    BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
    The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
    submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
    Set your poll interval to a non-zero value and check the behavior.
    Regards.

  • Receiver SFTP adapter giving spaces between characters in the Output file

    Hi PI Experts,
    My Scenario is: Paymul (EDI file ) ECC -> PI -> SFTP server.
    Source Sender File adapter able to pickup this Paymul D96A file and able to send messages to target SFTP server using SFTP receiver adapter.
    But, Generated Output file having single space between each character. I am not using any content conversion modules in Receiver SFTP adapter.
    Also not having any mappings to transform the messages. it is just pass through interface.
    I have attached example Output file. I have changed the .Dat file to .txt just to attach here.
    Could any one try to help me on this. Please let me know incase need any more details.
    Thanks,
    Govindu.

    Hi Govindu,
    Please see if the below Endcoding settings wont resolve your issue.
    File Type - Text
    File Encoding - ISO-8859-1
    Regards,
    Jannus Botha

  • Proxy settings for dynamic ftp send port

    Does anyone have an idea how to configure the proxy settings when using a dynamic send port to connect to an ftp server?
    When using the FTP send port there is the property 'Server' to specify the proxy settings, but how would this be done with a dynamic send port?
    I can't find anything about this. And there doesn't seem to be a property
    FTP.Server according to intellisence in my orchestration.
    Kind regards,
    Mitch Vanhelden
    Blog: http://mitchvanhelden.blogspot.com

    It seems like most or all of the FTP properties are exposed in the Global Property Schemas assembly.  The FTP properties are under the "FTP" namespace (see FTP property schema below).
    One thing you might try is to get it working (simple messaging) using a static FTP send port.  Once it is working, turn on send port tracking of message properties (before and after port processing).  Inspect the tracked message for the FTP
    related properties set during static transmission and try setting these within your orchestration.
    <?xml version="1.0" encoding="utf-16"?>
    <xs:schema xmlns="http://schemas.microsoft.com/BizTalk/2003/ftp-properties" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" targetNamespace="http://schemas.microsoft.com/BizTalk/2003/ftp-properties" xmlns:xs="http://www.w3.org/2001/XMLSchema">
    <xs:annotation>
    <xs:appinfo>
    <b:schemaInfo schema_type="property" xmlns:b="http://schemas.microsoft.com/BizTalk/2003"/>
    </xs:appinfo>
    </xs:annotation>
    <xs:element name="RepresentationType" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="198b2027-4cde-4677-88f1-7b66caf6473a"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="SSOAffiliateApplication" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="8045bcbe-3285-412c-8b5a-dc3be5978c9b"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="UserName" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="6E789556-2F81-4fa6-B8E2-5214F1662289"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="Password" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" isSensitive="true" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="FEFD9283-C98A-470d-8E0A-C00214EE4047"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="BeforePut" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="58C0F130-2D2D-4374-8418-714A31046A58"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="AfterPut" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="CFBD9956-B0C6-48af-9257-4E27C7771998"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="ReceivedFileName" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="441B372A-23A1-4465-8329-F56AC0BDBFD8"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="MaxConnections" type="xs:unsignedInt">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="0A580338-036A-411B-A28A-1BCC86E56458"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="CommandLogFileName" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="CCE01F9B-8869-4216-BD7A-8F476FA40327"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="AllocateStorage" type="xs:boolean">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="4945CA1F-A812-483B-B32F-C98513EBF51E"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="PassiveMode" type="xs:boolean">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="74B6373E-550F-4434-B2D1-DE912ACDB3A7"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="SpoolingFolder" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="1C703221-ADE1-4DF7-9D6E-1770903DC614"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="UseSsl" type="xs:boolean">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="D032AB42-E927-470C-B5E8-E59A5E32851D"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="UseDataProtection" type="xs:boolean">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="42E3D7F0-5FF5-4C6E-8E72-BD76D203C6DD"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="FtpsConnectionMode" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="EDA0F134-3F42-4DD7-8428-75BA65E7C4CA"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    <xs:element name="ClientCertificateHash" type="xs:string">
    <xs:annotation>
    <xs:appinfo>
    <b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="423E6603-652E-4A61-B49F-B632031E3180"/>
    </xs:appinfo>
    </xs:annotation>
    </xs:element>
    </xs:schema>
    David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

  • Which ports to open on FW for Voip

    Hello,
    Can anyone tell me which ports (TCP and UPD) to open on the firewall when you have ip phones and ip communicator behind it?
    This just to squeeze down the range a bit.
    Thanks for your help.
    Kurt

    Kurt,
    Take a look at the following link.
    http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/sec_vir/udp_tcp/index.htm
    Hope this helps. If so, please rate the post.
    Brandon

  • Which ports to open in PIX for outgoing Cisco VPN client connections ?

    I have Cisco vpn clients behind the PIX and i want them to connect to a vpn 3005 which i behind another PIX . Can anybody tell me which ports i have to open on both the PIX firewalls ?

    It depends on how you have deployed your VPN Remote Access users.
    By default, if you enable IPSec-Over-TCP or IPSec-over-UDP, then port 10000 is used for both, these methods are Cisco Proprietary and can be changed.
    If you use NAT-T (NAT Traversal), the Standards-based implementation, then it uses UDP-4500).
    either way, the operation of the VPN depends on:
    1) Whether these service have been enable on the VPN Concentrator
    2) Enabling the relevant transport settings on the VPN Client connection Properties.
    Regarding the PIX infront of the VPNC3005, you will need to allow these above ports inbound to your VPNC3005 Public interface.
    Locally, it depends if you filter outbound connections through your PIX. If you don't, then the PIX will allow the connection for the VPN Client attempting to access the remote VPNC3005

  • I have office 2013 and it uses word to save and open .pdf files.

    I want to use Adobe Reader XI, how can I use that instead of Word?

    Word cannot interpret the unicode that comprises a PDF so it just comes up as garbled characters all over the page.
    Are you using Windows 7 or 8?
    I know how to change it in 7.
    In your Control Panel>Programs>Default Programs>Set Associations
    Scroll down to Adobe Acrobat Document (or ,pdf) in the list. Click it and click Change Program. Change it from Word to Reader, and click OK.

  • LabWindows/CVI 2013 SP2 stops working when I try to open a file using the project file menu.

    I have windows 7 on my system and sometime late last year I starrted getting a Windows dialog telling me that LabWindows/CVI has stopped working when I try to open a file from the project file menu.  I also get an error when I run a project debug mode and use a selectFilePopup in the code.  The error says, "The program has suspended execution at address 0x75D5025E.  No source line information is available."  I've tried removing and reinstalling CVI to no avail.  Any suggestions?

    Constantin,
    Thank you for your response.  I've attached screnshots showing the version details for kernal32.dll and ntdll.dll.  I also looked at the updates to see which might have been installed when the problem started.  Unfortunately there are 15-20 updates every month.  I didn't take note of when the error started to occur.  At first it only affected my ability to open files from within the project (i.e. file->open->Source, etc).  Then I went back to modify a project that had a SelectFilePopup and found that that wouldn't work either. 
    Attachments:
    ntdll.dll version.jpg ‏15 KB

  • Making a static FTP send port behave like dynamic

    Hi,
    we are on BizTalk 2013.
    we have a static send port FTP. an server ip and a folder is set for this static FTP port. however we want to change the target folder dynamically. so we have a custom send pipeline that promotes the below properties:
                pInMsg.Context.Promote(
    "IsDynamicSend",
    "http://schemas.microsoft.com/BizTalk/2003/system-properties",
    true);
                pInMsg.Context.Promote(
    "OutboundTransportType",
    "http://schemas.microsoft.com/BizTalk/2003/system-properties",
    "FTP");
                pInMsg.Context.Promote(
    "OutboundTransportLocation",
    "http://schemas.microsoft.com/BizTalk/2003/system-properties", 
    FTPPath+ReceivedFileName);
    what is wrong with this approach? Because it always takes the static configuration and not the dynamic as set above.
    Please help.
    Thanks

    Best option would be to suspend a normal message and check it's promoted properties having URI, later in pipeline component just modify/ overwrite those properties.
    You don't need to touch "OutboundTransportType" property as it will be already set to FTP.
    Also "IsDynamicSend" doesn't needs to be set to True, because at adapter level it doesn't matter whether the port was dynamic or not, it only cares about the promoted context properties.
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • SFTP adapter Config in PI 7.1

    Hi Experts
    I am working on a SFTP adapter on the sender side to encrypt the file and send it to the Thirdparty, Can I configure multiple files to send to  the different parties or banks (Different Bank may use different keys) in the same Receiver SFTP  adapter to achive this
    please help if there is any blog on SFTP Receiver adapter how to configure
    Thanks
    PR

    It depends on the adapter you are using to achieve the SFTP protocol (seeburger, advantco,...?). However, most of them don't support multiple FTP connections with the same adapter. But this is easy to achieve by adding many communication channels to the Receiver Determination of the scenario.
    Standard Receiver Determination 
    http://help.sap.com/saphelp_nw04s/helpdata/en/14/d5283fd0ca8443e10000000a114084/frameset.htm
    Also, for overal information on SFTP adapters for PI, please check the document below.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0e0117a-3167-2d10-d2ae-f87dfa5e00f0?quicklink=index&overridelayout=true

  • How to configure SMTP dynamic send port?

    Hi,
    I am trying to configure STMP send port to send emails, enabled SMTP Server on the DEV box and configured it as described in the link below.
    https://sandroaspbiztalkblog.wordpress.com/2013/05/09/biztalk-2013-installation-and-configuration-install-and-configure-smtp-server-feature-part-4/
    Able to send emails using Telnet client, and these email get stored in C:\inetpub\mailroot\Queue folder.
    I have a dynamic send with following values.
    msgEMail(SMTP.CC) = “[email protected]”;
    msgEMail(SMTP.DeliveryReceipt) = False;
    msgEMail(SMTP.From) = “[email protected]”;
    msgEMail(SMTP.ReadReceipt) = False;
    msgEMail(SMTP.Password) = “XXX;
    msgEMail(SMTP.Username) = “DDD”;
    msgEMail(SMTP.SMTPAuthenticate) = System.Convert.ToUInt32(XX.SMTPAuthenticate);
    msgEMail(SMTP.SMTPHost) = “smtp.domain.local”;
    msgEMail(SMTP.Subject) = “sdfgdfgd;
    msgEMail(SMTP.MessagePartsAttachments) = 2;
    Message gets suspended with the following error message.
    A message sent to adapter "SMTP" on send port "XXX_DynamicSendPort_XXXX" with URI "mailto:
    [email protected]" is suspended.
     Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit,
    Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=81bf3856ad764e35" Source: "XML assembler" Send Port: "XXX_DynamicSendPort_XXXXX URI: "mailto:localhost" Reason: Data at the root level is invalid.
    Line 1, position 1. 
     MessageId: 
    {3C50F418-24C4-4661-9B34-4B7F5F6FBBA4}
     InstanceID: {2F6B9A0E-92EE-4953-81D2-9A124FAC99CE}
    Please can some advise me what is wrong here? do you think I have configured
    msgEMail(SMTP.SMTPHost) property correctly? Or should it be the name of the DEV box?
    Thanks
    SS
    Shiva Sadayan

    Hi Shiva,
    You should not be using XMLTransit pipeline at the send port.
    Perhaps you should go with default passthrough pipeline or
    Create a send pipeline with MIME/SMIME encoder and drop it at Encode section of pipeline. Accept the default settings for MIME/SMIME encoder and use it with the dynamic port.
    I found this article very useful while sending email from BizTalk. Refer:
    Sending Emails in Biztalk
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Handling empty files Using SFTP adapter

    Hi folks,
    Can any please let me know how to handle empty file handling in SFTP adapter as a sender.
    I getting error in sxmb_moni while empty file coming in sftp adapter. Please help me on this issue.
    Thanks,
    Enivass

    Hi,
    please select option "Empty file Handling-*do not create Message*" in sender comm channel as per your requirement.
    Try this.
    Reg

  • Receiver SAP SFTP adapter-errorlog on SFTP server

    Experts,
    I am using receiver SAP SFTP adapter to connect to an SFTP server and send files.Receiver SFTP server is a VMS system.I could able to write the files to home directory of the user that has been given,but apart from writing the files I am seeing warning log file in the the target folder on SFTP server like below description.I am giving dot(.) in the file path to write the files to the default directory that has been assigned to the user given by receiver SFTP server team.
    WARNING: ssh_file_server_receive_proc: platform cannot stat() filename /home/dir1/dir2 ./TestFile(TestFile is my file name) .
    Just to test,we placed files in the receiver SFTP server using same user and password as the PI recv SFTP channel with command line and winsCP client tool,but we don't see any error logs on the server with WinSCP tool or command line transfer of the files.Log file with above  warning is generating only when we place files on the server using SAP SFTP adapter in the recv channel of PI.
    Please let me know,if you have any insight or seen similar issue.
    Thank you,
    Sri

    Hi Poonam - Blogs on SFTP : Just search for SFTP and filter by blogs/documents.. you can find many..
    >>> http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/305eeb5b-81e7-2f10-d8aa-9216de04ca3e?QuickLink=index&overridelayout=true&57075820413417
    http://scn.sap.com/docs/DOC-35572
    I read in some of the SDN forum that SFTP adapter doesnt have the capability to read the files from multiple directories. So, if we get any requirement to read the files from multiple directories using sftP, why could be a possible solution for this requirement?
    >>> Yes. It is only possible with NFS.
    You have to define multiple channels/interfaces...

  • SAP SFTP Adapter

    HI FRIENDS,
    I need your help in two points -
    1 -- Is there a document on sdn which covers the detailed information on SAP SFTP adapter? I found few links online but they are only covering few features. None of them talks about any limitation on the adapter.
    2-- I read in some of the SDN forum that SFTP adapter doesnt have the capability to read the files from multiple directories. So, if we get any requirement to read the files from multiple directories using sftP, why could be a possible solution for this requirement?
    Thanks for your time. PS.

    Hi Poonam - Blogs on SFTP : Just search for SFTP and filter by blogs/documents.. you can find many..
    >>> http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/305eeb5b-81e7-2f10-d8aa-9216de04ca3e?QuickLink=index&overridelayout=true&57075820413417
    http://scn.sap.com/docs/DOC-35572
    I read in some of the SDN forum that SFTP adapter doesnt have the capability to read the files from multiple directories. So, if we get any requirement to read the files from multiple directories using sftP, why could be a possible solution for this requirement?
    >>> Yes. It is only possible with NFS.
    You have to define multiple channels/interfaces...

  • Receiver SFTP Adapter

    Dear Gurus,
          I have configured receiver SFTP adapter using key based authentication to place the files in root (~/) folder, we have shared our public key to the SFTP vendor and they stored it in their key store.
          But while testing the scenario, in PI it's showing success everywhere in channel monitoring, moni and as well as messages monitoring, but strange none of the files were found in the SFTP box when I logged in using file zilla.
          Kindly give your valuable findings.
    Thanks
    Ravi.

    Hi Ravi,
    Are you using the same user account while logging in using FileZilla as in SFTP Receiver Communication Channel?
    Best Regards,
    Anand Patil

Maybe you are looking for

  • Blue screen error 1e on windows server 2008 r2

    Hi Friends, Please help me, I am facing with blue screen error 1e, Kindly help me to fix this issue, Problem signature:   Problem Event Name:    BlueScreen   OS Version:    6.1.7601.2.1.0.274.10   Locale ID:    1033 Additional information about the p

  • Smartforms. Text in Main is overwritten by a BMP picture

    Dear all, I have the following problem: If I print in the first page of the main a picture the following text element is not printed under the picture. The text is printed into the picture. On all other pages this process scenario works only on the f

  • [SOLVED] Trying to make command into bash alias

    Here is a command I would like to make into an easy to use bash alias: #Copy results of a find to somewhere find -iname "*something*" -exec cp '{}' /path/to/copy/results/to \; I realize there are usually several ways to do something in the shell, so

  • Auto resize photos in slideshow??

    I am creating a slideshow with many pictures and don't want to go through and resize each picture. How do I make it so the pictures get automatically formated to a particular size?

  • How to check sent email messages?

    Hi all. I set up my imap account on the phone and it works great. Only problem is, how do I check my sent messages? I thought it might be in the 'Mailboxes' area, but the only thing there is inbox.. Anyone have any ideas? Thanks!