Business Workflow between MIR7 and MIR4

Hi,
I want to implement Business Workflow between MIR7 and MIR4 in following manners -
#1. MIR7 - Invoice Verification Preparation through MIR7
#2. I want intervention of Audit Team to complete this document
#3. I want intervention of Taxation team to release this document
#4. Finally post by Account team through MIR4
Pls. guide me.
Urvang

Hi NVS,
What Markus says is correct. There is the ability to import wsdl services into workflow for a service step in the process but in general you may have to develop an abap object as a wrapper to access the third party system.
My rule of thumb is that if 70-80% of the process is in the one system (Web AS supporting the application) then it's fine doing it with workflow otherwise you should look at a more structured approach to make sure you have a stable solution for the long term - <a href="/people/alan.rickayzen/blog/2006/12/15/bpel-in-a-nutshell">BPEL</a> is the defacto standard for dealing with such processes so you should be looking at XI for the process integration combining it with workflow or tasks for the human integration.
If it's a simple process and you don't have workflow know-how then guided procedures is a good intuitive approach.
Alan

Similar Messages

Deactivate Invoicing (MIR7 and MIR4) in a Purchase Order

Hi SAP Experts,
We have Purchase Orders (PO) for service (construction of building) to a vendor (contractor). We are using the Goods Receipt (MIGO) to receive the percentage accomplishment. However, we are using an ABAP program for invoicing instead of (MIR7 u2013 parking of invoice and MIR4 u2013 posting of invoice) since we pay a down payment to the vendor and we also have a retention amount. Our problem is if we use the ABAP program for invoicing to process payment, we can process it again using MIR7 and MIR4, which may result to double payment to the contractor. Is there a way where we can receive the goods (MIGO) and deactivate parking and posting of invoices (MIR7 and MIR4 respectively)?
Thanks,
Matt

Hi vaishali gupta,
Thanks for the advise. We ticked the final invoice and it did not let us invoice the PO using MIR7 and MIR4 and our ABAP program. However, we still need to issue an invoice using the ABAP program that we created. Is there another way where we can use our ABAP program to invoice the PO and at the same time, cannot be invoiced using MIR7 and MIR4?
Also, when we ticked the Final Invoice, when we made a goods receipt, the amount that was received became 0.00.
Thanks,
Matt
Edited by: chuamatt on Mar 6, 2012 1:54 AM
Edited by: chuamatt on Mar 6, 2012 2:09 AM
Edited by: chuamatt on Mar 6, 2012 2:14 AM

Updating Final Cut Studio 2.01 and workflow between FCP and AE

Hi. I am currently working in FCE 3.5 and am considering purchasing Final Cut Studio 2.01 (new and sealed) as opposed to the latest version since I am running a PowerPC G5. Am I assured of being able to download all the updates for Final Cut Pro 6 and exactly which version would be the latest and final one? Was there ever an FCP v6.5? I do mainly animation/motion graphics and work in After Effects (along w/ Flash, Carrara, Photoshop, Illustrator, etc.). I understand that the workflow between FCP (as opposed to FCE) and AE is greatly enhanced. Can someone give me an idea of what advantages this new workflow will offer in terms of what I'll be able to accomplish that I can't do now w/ FCE? Also, any other comments on how FCP (as compared to FCE) will benefit me as an animator will be greatly appreciated. Lastly, am I correct in assuming that I will be able to open my FCE 3.5 project files in FCP 6 but not visa versa? Thanks. Jack.

Thanks for the replies everyone. I see that I will need some 3rd-party support in order to realize the benefit of a Final Cut Pro/After Effects workflow. Have another question. What are the kinds of filters that you can keyframe in FCP but not in FCE? And are there many filters in FCP that are not included w/ FCE? As I deal mainly w/ animation as opposed to footage of live video I am trying to justify the investment in Final Cut Studio 2 in terms of it being a benefit to me as an animator. I currently use FCE 3.5 (which includes versions of SoundTrack and LiveType) and After Effects CS3 plus other graphics programs. I would love to be able to work within DVD Studio Pro as iDVD is so limiting as an authoring program but am not sure how much I will benefit from switching from FCE to FCP. This is what I am trying to nail down.

General workflow between FCS and FCP question....

Hey all.
I'm totally new to FCS, and while in a few hours I've figured out a lot about how it works, what is totally eluding me is how to establish an efficient work flow back and forth between FCS and FCP...it's really driving me crazy.
Yeah, I know, read the manual...but nothing I'm finding anywhere seems to be a really direct, straight-up description of how to get a FCP project up and running.
Specifically I am dealing with the whole "checking out" a project thing, creating proxies, etc., it just feels very awkward. The test project I'm working with has 1 (ONE!) clip (granted a 28GB HD clip)...but FCS is not allowing me to make a proxy into the cache, this is after I already took that clip into FCP, cut it, saved it, checked it back into FCS just to make sure I got the basics of flowing back and forth down.
I wish I could be more specific, but I really really really just want a basic explanation of how to use the FCS as, you know, a server.
Anyone who can point me in that direction is a GOD!
thanks,
Mark

Hi Mark,
Here are the specific sections of the manual that should give you the best explanation regarding the Check out/in workflow for FCP projects in Final Cut Server:
Check out:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =5
Editing:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =6
Check in:
http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =7
-Daniel

Question about Workflow between Premiere and After Effects

Hey guys, I have Production Premium CS5 (Premiere and AE)
One thing that has always confused me was basic workflow between these 2 products. Is it best to get your clips, but them into sequence, do the basic effects that Premiere supports and output into the highest quality video in order to take into AE and apply effects to?
Or should I take video footage, do my After Effects work, export that as a clip that will then be used in the video composition in Premiere? I know I don't want to move a project too many times between because of compression, so what would the most optimized workflow be?
FYI, I am doing a lot of video game frag movies, so I have a lot of effects I like to put into it.

Really?
I'm always amazed at Photoshop's cold boot startup time. On my rig it takes 8 seconds. From a warm boot, Photoshop will start in 2-4 seconds.
This isn't the case with my video editing software though...
Sony Vegas 8.1 (looking to learn Premiere so I don't need this anymore - Cold Boot : 8 seconds, Warm Boot : 3 seconds)
After Effects (Cold Boot : 22 seconds, Warm Boot : 8 seconds)
Premiere (Cold Boot : 48 seconds, Warm Boot : 16 seconds)
Premiere seems to be a beast of a program; I'm rather surprised, I thought AE would be the more intense one. Sorry, I haven't yet overcome my fears of losing projects/data because I'm running on a Windows machine.
It's half the reason why I have a Mozy account to backup my files to an online resource.

Business Conectior between EBP and CCM

Hi
I have one question
Do we require any business connector is for exchange of data between EBP and the catalog content management ?
I think we just need OCI for transfer of data ... Is there any other Business connector is required.
Nitin

Also - the OCI exchange is From Catalog -> EBP. Data exchange, like contract or product master data, requires configuration of SAP XI to achieve these requirements, as does usageof XML type upload files.
Regards,
Jason

Workflow between fcp and soundtrack pro

i am working on getting the workflow between final cut pro and soundtrack pro right for several weeks now, and i have to say, i expected more.
not that all the special gadgets aren't there, they are just not working the way they describe them in their manual or other sources.
am i the only who has made such experiences working with these tools?
for example: if i want to send a single clip from my timeline to soundtrack, there should be the possibility to have in and out points, so that final cut doesn't send the whole clip (even the parts i don't use ) to soundtrack. cool feature if it would work! no matter what you do it always sends the whole clip to soundtrack and therefore saves the whole file with all the changes and effects. and we don't talk about 8 or 9 MB here. a single clip of 1 minute, altered with EQ, takes up to 80 MB to save!!
another problem from my point of view is the exchange of whole sequences. the whole thing heavily depends on the use of markers, because without them someone working with soundtrack doesn't even see were the cuts are, which makes it nearly impossible to synchronise sounds. markers have to be placed at every single cut.
i could go in like this, but first i would like to know if i mist some fundamental thing about the use of these two pieces of software.

It depends on how you are working. If you've sent over something as a Multitrack project then you have to export the mix and edit it back in as it doesn't update in the same way. A STP audio file shoul update upon saving.

Can any please explain the integration business process between PS and CS

Dear Guru's
Can any please explain the integration business process between Project systems (PS) and customer service (CS).
Business Process: We do machinery Erection or commissioning, later we do provide service warranty for one year.
How we map this Business scenario in sap.
Regards,
Bhanu

basic steps for such a process would be
1) Use PS functionality for your machinery erection or commisioning work. Once the physical work is completed then close porject
2) Use CS functionality for warranty and service - set up the work as a functional location on customer site (PM/CS functionality)
3) Use service order to manage any service calls on the object which could require billing via SD module - bill value may be zero if under warranty

Replication of text determination (business partner) between ERP and CRM

Hello,
in ERP I have maintained a text determination procedure Z1 and assigned it to the text object "KNA1". The textprocedure include the Text ID's "Z011" and "Z020".
In CRM exist the text object "KNA1" and "BUT000". I have customized a a text determination procedure "Z1" and the same Text ID's as in ERP, to booth text objects.
The text ID's don't be replicated, no matter i maintain it in CRM or ERP.
Can anybody tell me, how can I replicate the content of the text ID's? What is the relevant text object in CRM?
Thanks for help
Regards
Andreas

Andrea,
There are objects for replicating the data between CRM and CDB.
CRM_DNL_TTXOB and CRM_DNL_TTXID.
But none for replication between R/3 and CRM. WE need to maintain it manually.
Regards,
Aj.

Best workflow between Premiere and Encore for subtitling...

Hello All,
I switched from FCP and DVDS Pro to Premiere and Encore but having trouble to get the same workflow for the type of work we do here,
We deal with lots of foreign films that will be distributed on DVDs and streamed via places like Xbox, PSN and such.
We tried by starting by laying the final edit of the film in Premiere and placing subs. We found out that there was no easy way to export the video track as an stl or compatible format so we outputted the film and used subrip to create an srt which worked ok when we brought it over to DVDSP but subrip always generates lots of bad text which has to be manually fixed. I than decided lets try Encore cause it must be more compatible with Premiere for transferring info between the two but have not found a good way to do this yet.
What would be the best work flow between the two programs so you can create a DVD with subs and also have movie with a sub track that can be outputted for VOD besides having to do the work twice? I am sure many production houses have this need.
Thank you all for reading and look forward to some ideas. We are using CS6.
-john

To the best of my knowledge, you will have to use a non-Adobe app for creating the subtitle file. Once created, you'd bring that into Encore for disk creation. I'm not sure you can create a file for VOD with subtitles using Adobe tools. Encore can create Flash output, but that's probably not the best choice here.

Intercompany business transaction between US and France (EU)

Hi
Can any one tell how the intercompany business transaction works between a company code in US and another company code in France (EU countries). I have intercompany where both the company codes are within USA, but not sure how to understand the legal and other things to set up this transaction.
I would like to know the business process and please do not reply with configuration details.
Thanks
Suddu

You can just try using Search functionality in the forum to find the answers. I am sure you will find plenty of answers for intercompany business process.
Regards,

Error message in case of One time vendor in MIR7 and MIR4.

Hi,
We have a requirement where we need to give a warning message when an invoice document is parked in case if it is a One time vendor and bank details are missing. It should be an error message if user is trying to save it as completed or posting the document. We have already found a BADI INVOICE_UPDATE method CHANGE_AT_SAVE for giving error / warning message but we also want the same to be appeared in the popup coming when we press Messages button in MIR4 screen same way as standard messages are shown. I know that there is a table T_ERRPROT which need to be populated in order to show the messages in the popup window but could not find any appropriate user exit or badi to populate this table. Any suggestion or solutions are welcomed.
Thanks and Regards,
Jaideep,

Hi,
in badi HEADERDATA_CHECK you have available as input parameter I_RBKPV.
do something like:
* If there is any error do not allow posting
    DATA: gt_errtab    TYPE TABLE OF mrm_errprot,
          gs_errtab    TYPE mrm_errprot.
    CONSTANTS:     c_errprot(23)   TYPE c VALUE '(SAPLMRMF)TAB_ERRPROT[]'.
    FIELD-SYMBOLS: <fs_errprotj_dt> TYPE table.
    ASSIGN (c_errprot) TO <fs_errprotj_dt>.
    REFRESH gt_errtab[].
    gt_errtab[] = <fs_errprotj_dt>[].
    DATA: c_okqx(17)   TYPE c VALUE '(SAPLMR1M)OK-CODE'.
    FIELD-SYMBOLS: <fs_okqx> TYPE ANY.
    ASSIGN (c_okqx) TO <fs_okqx>.
    IF NOT gt_errtab[] IS INITIAL.
      READ TABLE gt_errtab INTO gs_errtab WITH KEY msgty = 'E'.
      IF sy-subrc = 0.
        CASE <fs_okqx>.
          WHEN 'BU'. "POST
* This is optional: you can either search for a particular message or
* do not allow any error message
* Here search for the message triggered in badi INVOICE UPDATE
            READ TABLE gt_errtab INTO gs_errtab WITH KEY msgty = 'E'
            msgid = 'ZXX' msgno = '030'.
            IF sy-subrc = 0.
              CLEAR <fs_okqx>.
              MESSAGE s030(zxx). "While errors exist document will not be posted
            ENDIF.
        ENDCASE.
      ENDIF.
ELSE. "THIS IS THE NEW PART
   IF i_rbkpv-YOURBANKFIELD IS INITIAL. "This is the New part
        CASE <fs_okqx>.
          WHEN 'BU'. "POST
              CLEAR <fs_okqx>.
              MESSAGE s031(zxx). "Please fill in bank details
        ENDCASE.
   ENDIF.
ENDIF.
Best regards.
Edited by: Pablo Casamayor on Jun 2, 2009 6:39 PM

Workflow between FCP and Color

I have been working on a 720P DVCPRO project. I am not sure what the work flow should be for adding in your color correcting stage.
I have edited my project with speed ramps and different effects within Final Cut 6.02. When I rendered my files from Color after making a color correct, I then sent it back to Final Cut.
Once I opened the timeline that color added to my final cut project, All of my transitions were replaced with straight cuts. Also the speed ramps were gone, and any variable speed clip within the timeline had been replaced with 100% speed from the end of the clip i used.
Should this be expected? If so how should I be working on the color correcting stage, or in what order should I be adding effects and timeramps to?
What is the best way to do this?
Any help would be great!
Thanks,
Jesse

Please refrain from double posting, there's absolutely no need. http://discussions.apple.com/thread.jspa?threadID=1382731&tstart=0
I'll also tell you, again, to read the release notes, the user guide and search the forum as this has been discussed many times already.

Viewing free/busy time between gmail and exchange

I have a need to allow users in a partner organization to see free/busy time in our calendars for scheduling. We are using Google Apps for Business. The partner organization is using Microsoft Office365.
If both were using O365, I know federation is possible. Is there anything similar with Gmail or any third part tools to allow both parties to see free/busy time on the others calendars?
This topic first appeared in the Spiceworks Community

Hi Brian,
I think the root cause is that the external URL was not on the E2K7 CAS servers for EWS.
You can set the URL using the below command:
Set-WebServicesVirtualDirectory -identity "CHIEXCH-CAS-P1\EWS (Default Web Site)" -externalurl https://***.***.com/EWS/Exchange.asmx
Set-WebServicesVirtualDirectory -identity "CHIEXCH-CAS-P2\EWS (Default Web Site)" -externalurl https://***.***.com/EWS/Exchange.asmx
Thanks,
James

Information about Integration WebDynpro for ABAP and Business-Workflow

Hi Experts,
I'm looking for information about
Integration WebDynpro for ABAP and Business-Workflow
Link, documents and books are welcome!
Thanks
mishak

If you have worked on workflows earlier the procedure is very simple. You just need to enter certain parameter values of your application in SWFVISU for the respective task and re-register your system in UWL administration. Thats it! your webdynpro and workflows are integrated. For details on the parameters check the following link,
http://help.sap.com/saphelp_nw04/helpdata/en/19/bff5c18ba44da4a4ca68cf572dabda/frameset.htm
There are also a couple of blogs on "launching webdynpro from UWL" (Procedure for both Java and webdynpro is almost similar). You can also check these for more details.
Thanks,
Prasath N

Business Workflow between MIR7 and MIR4

Similar Messages

Maybe you are looking for