Cairo-dock being spawned multiple times when clicking 'home' icon?

Hi all,
Not sure if any other cairo-dock users experience this, sometimes another instance of cairo-dock will launch seemingly out of nowhere. I've seen this for a couple of weeks but never been able to correlate it with any particular thing I've been doing. The only way I realize is that when I've got my mouse moving over the dock there's my animated dock and another static copy behind (which isn't animated since it doesn't have focus). Quitting the first dock just leaves the 2nd fully functional one in its place.
EDIT: mandog isolated the cause.
Last edited by ngoonee (2010-11-01 16:35:32)

This was happening to me when I was using Xfce. I had cairo dock at autostart but it was also starting because of Xfce's weird session saving option.
Last edited by z0id (2010-11-01 13:50:34)

Similar Messages

Email being sent multiple times when actions are triggered after creating an incident. Anyone has a resolution?

Email being sent multiple times (3 times) when actions are triggered after creating an incident.
Below is the snip of "Scheduled Actions" of the created Incident.

Hi Ritesh
Email is triggered based upon conditions and you set
on closer look it is 3 different email on three 3 different requirement for e.g
email triggered to reporter on new status
email trigerred to processor on Proposed solution and New status
Therefore, check the start condition for above 2 email actions and refer below blog
Sending E-Mail from Support Message
Thanks
Prakhar

C# Constructor being called multiple times when I run my VI

Hi all,
We are runing LabVIEW 8.51 in the lab and have been using a bodged together C++ DLL which was crude but got the job done. Now looking at rewriting it in C# to make it easier to maintain and support long term.
Ive got the C# DLL appearing in Labview and can happily call my test functions from the VI to prove both the DLL inputs and outputs are working fine (the simple input a number, add 1 and return result type of code).
However, this DLL will end up managing a Serial port connection so the contstructor must only be called once as its responsible for making my .net serial port object. Ive added a text log message in the constructor and have found that just running the VI is causing the constructor to be called at least 5 times a second. There is no user input causing this....just running the VI.
Both VI and C# source is attached.
Any ideas folks? Im a complete newbie at LabVIEW having taken this on from another developer.
The VI is in \Release and this is where the Log file is generated.
Mat
Attachments:
Bus Pirate LabVIEW.zip ‏78 KB

Ummmm.. yes, loop. That big thing gray rectangle that surrounds your code. Have you done any LabVIEW tutorials? That isn't even a LabVIEW question, but a basic programming question.
To learn more about LabVIEW it is recommended that you go through the introduction material, tutorial(s), and other material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. There are also several Technical Resources. You can also take the online courses for free.

On Execute operation, the bean getter is being called multiple times

Hi,
I have a JCR data control, i am trying to write a method that returns predicate, but this method is being called multiple times, when executing the advanced search operation.
public List<Predicate> getPredicates() {
ArrayList<Predicate> predicates = new ArrayList<Predicate>();
   // predicates.add(new Predicate("jcr:content/idc:metadata/idc:xScope",Operator.EQUALS,"GLOBAL"));
DCBindingContainer bc=(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
JUCtrlListBinding attrBinding=(JUCtrlListBinding) bc.findCtrlBinding("StateId");
Object stateId= attrBinding.getSelectedValue();
if(stateId instanceof Row){
predicates.add(new Predicate("jcr:content/idc:metadata/idc:xState"
, Operator.EQUALS
,((Row)stateId).getAttribute("StateId").toString()));
attrBinding=(JUCtrlListBinding) bc.findCtrlBinding("DistrictId");
Object districtId=attrBinding.getSelectedValue();
if(districtId instanceof Row){
      predicates.add(new Predicate("jcr:content/idc:metadata/idc:xDistrict",Operator.EQUALS,((Row)districtId).getAttribute("DistrictId").toString()));
    attrBinding=(JUCtrlListBinding) bc.findCtrlBinding("Scope");
    Object scopeId=attrBinding.getSelectedValue();
    if(scopeId instanceof Row){
        predicates.add(new Predicate("jcr:content/idc:metadata/idc:xScope",Operator.EQUALS,((Row)scopeId).getAttribute("ScopeType")));
    AttributeBinding tempAttrBinding=(AttributeBinding)bc.findCtrlBinding("CreatedDate");
    Object createdDate=tempAttrBinding.getInputValue();
    if(createdDate!=null){
        predicates.add(new Predicate("jcr:content/jcr:created",Operator.EQUALS,createdDate.toString()));
    if (predicates.size()>0){
      return predicates;
return Collections.emptyList();
} The problem is while it's being called multiple times different list's are being returned which is causing the method not to work . The bean is in pageFlowScope .

That is bc ADF life cicle... Is always executing 2 times...

Asked to enter PIN multiple times when sending Digitally Signed emails

Hey everyone, I have been having a very difficult time trying to figure out why my co-workers and myself are being asked to enter our PIN multiple times when digitally signing emails. My co-workers are looking to me for a solution, however
I just cannot seem to find any information on as to why this is happening. Could anyone possibly shed some light on why this may be happening? Thanks in advanced!!!
P.S. We are using Outlook 2013

Hi,
Let's troubleshoot this issue by the following steps:
1. Start Outlook in Safe Mode to determine whether it's 3rd-party add-ins related:
Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
If no issue in Safe Mode, disable the suspicious add-ins to verify which on caused the problem.
2. Go to Control Panel and search for "Manage computer certificates" then open it, find the certificate and right click on it, choose Properties -> under General tab select "Enable all purposes for this certificate" -> Apply ->
OK.
3. If you create a new Outlook profile, does this issue persist? A new profile will provide a new environment for the account and it will not remove any information from the old profile. A profile corruption may be the source of this issue.
How to create and configure email profiles in Outlook
http://support.microsoft.com/kb/829918/en-us
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Manage computer certificates

Finalize() method being called multiple times for same object?

I got a dilly of a pickle here.
Looks like according to the Tomcat output log file that the finalize method of class User is being called MANY more times than is being constructed.
Here is the User class:
package com.db.multi;
import java.io.*;
import com.db.ui.*;
import java.util.*;
* @author DBriscoe
public class User implements Serializable {
    private String userName = null;
    private int score = 0;
    private SocketImage img = null;
    private boolean gflag = false;
    private Calendar timeStamp = Calendar.getInstance();
    private static int counter = 0;
    /** Creates a new instance of User */
    public User() { counter++;
    public User(String userName) {
        this.userName = userName;
        counter++;
    public void setGflag(boolean gflag) {
        this.gflag = gflag;
    public boolean getGflag() {
        return gflag;
    public void setScore(int score) {
        this.score = score;
    public int getScore() {
        return score;
    public void setUserName(String userName) {
        this.userName = userName;
    public String getUserName() {
        return userName;
    public void setImage(SocketImage img) {
        this.img = img;
    public SocketImage getImage() {
        return img;
    public void setTimeStamp(Calendar c) {
        this.timeStamp = c;
    public Calendar getTimeStamp() {
        return this.timeStamp;
    public boolean equals(Object obj) {
        try {
            if (obj instanceof User) {
                User comp = (User)obj;
                return comp.getUserName().equals(userName);
            } else {
                return false;
        } catch (NullPointerException npe) {
            return false;
    public void finalize() {
        if (userName != null && !userName.startsWith("OUTOFDATE"))
            System.out.println("User " + userName + " destroyed. " + counter);
    }As you can see...
Every time a User object is created, a static counter variable is incremented and then when an object is destroyed it appends the current value of that static member to the Tomcat log file (via System.out.println being executed on server side).
Below is the log file from an example run in my webapp.
Dustin
User Queue Empty, Adding User: com.db.multi.User@1a5af9f
User Dustin destroyed. 0
User Dustin destroyed. 0
User Dustin destroyed. 0
User Dustin destroyed. 0
User Dustin destroyed. 0
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 1
User Dustin destroyed. 1
User Dustin destroyed. 1
User Dustin destroyed. 1
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
User Dustin destroyed. 2
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
User Dustin destroyed. 3
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
User Dustin destroyed. 4
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
User Dustin destroyed. 5
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
User Dustin destroyed. 6
Joe
USER QUEUE: false
INSIDE METHOD: false
AFTER METHOD: false
User Dustin pulled from Queue, Game created: Joe
User Already Placed: Dustin with Joe
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
User Dustin destroyed. 7
INSIDE METHOD: false
INSIDE METHOD: false
USER QUEUE: true
INSIDE METHOD: false
INSIDE METHOD: false
User Dustin destroyed. 9
User Joe destroyed. 9
User Dustin destroyed. 9
User Dustin destroyed. 9
User Dustin destroyed. 9
User Dustin destroyed. 9
INSIDE METHOD: true
INSIDE METHOD: false
USER QUEUE: true
INSIDE METHOD: false
INSIDE METHOD: false
INSIDE METHOD: true
INSIDE METHOD: false
USER QUEUE: true
INSIDE METHOD: false
INSIDE METHOD: false
It really does seem to me like finalize is being called multiple times for the same object.
That number should incremement for every instantiated User, and finalize can only be called once for each User object.
I thought this was impossible?
Any help is appreciated!

Thanks...
I am already thinking of ideas to limit the number of threads.
Unfortunately there are two threads of execution in the servlet handler, one handles requests and the other parses the collection of User objects to check for out of date timestamps, and then eliminates them if they are out of date.
The collection parsing thread is currently a javax.swing.Timer thread (Bad design I know...) so I believe that I can routinely check for timestamps in another way and fix that problem.
Just found out too that Tomcat was throwing me a ConcurrentModificationException as well, which may help explain the slew of mysterious behavior from my servlet!
The Timer thread has to go. I got to think of a better way to routinely weed out User objects from the collection.
Or perhaps, maybe I can attempt to make it thread safe???
Eg. make my User collection volatile?
Any opinions on the best approach are well appreciated.

Simple Event being Displayed Multiple Times

I have a simple event from the past that is being displayed multiple times. There are no other UIDs that are the same in iCal and no other event has the same SUMMARY name.
This particular event shows up 9 times. I can also reproduce the result from Automator by searching the specific calendar and looking for events in the date range.
The event is as follows:
BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Apple Inc.//iCal 3.0//EN
CALSCALE:GREGORIAN
BEGIN:VEVENT
SEQUENCE:5
TRANSP:OPAQUE
UID:EC6F5DBC-9BCC-4007-87F2-4A9C796C8551
DTSTART:20070330T000000
DTSTAMP:20071206T205550Z
SUMMARY:Babysit Paul
CREATED:20080919T173959Z
DTEND:20070401T120000
END:VEVENT
END:VCALENDAR
I am not very familiar with the format but it looks pretty straight forward.
The calendar is being synched via Mobile Me and is shared by another two computers. Not sure why this should be relevant since the entry on the computer and on Mobile Me both show this duplication of the event.
The reason I was looking at all was because of the hangs in iCal since I set the sync to automatic.
Any ideas welcome,
Richard

Post Author: foghat
CA Forum: Data Connectivity and SQL
If all the records you are displaying in your report
truly are duplicated, you could try check off 'select distinct records'
from the File --> Report Options menu. While this may solve the problem for you, it would be worthwhile to determine if you are actually joining your tables correctly.
likely the records aren't an exact duplicate and the problem is with your join criteria. To verify this you can: start by removing table b from the database expert altogether. does
that solve your problem of multiple rows? If it does, you are not joining to table b correctlyIf you still have
multiple rows, loan_id on its own must not make a record unique. Is
loan_id duplicated in either of your tables? Just because loan_id is a
primary key does not necessarily mean it is unique - often a record
will have 2 or more primary keys and only when all primary keys are
used is the record unique. If you display all of the columns
from both tables, you will hopefully see some (maybe just one) columns
where the value is different between your seemingly duplicate data.
You may need to join on this value as well.as for the type of join you are using (inner, not enforced) you should be fine. Good luck

Dps file automatically opening multiple times when working on another file in the same folio?

dps file automatically opening multiple times when working on another file in the same folio? Can anybody please help

Can you try resetting your preferences first and see if that helps - see Troubleshooting 101: Replace, or "trash" your InDesign preferences

EO entity level validations being executed multiple times

Hi,
I'm using JDev 10.1.3.4, BC, JSF
I have defined multiple entity level method validators in my entity object. On commit I get the desired results except for the fact that each of my method validators runs multiple times when they should only run once. So I end up with twice the method validator messages that I should. And if I put any additional messaging in in the validators themselves I end up with 10 times the desired messages.
What are some of the reasons that would cause this looping through the validators. I assume I have done something to cause this but can not figure out what it is. Any ideas on what I should look for?
Note : Also using JHeadstart but I don't think it should be a factor at the entity level.
Thanks,
Jim
Edited by: 170412 on May 5, 2009 4:11 PM

Hi,
1) Set the Foreign key using setAttribute Methods ? When u create a VO based on Multiple EO's, there should be some relationship between those 8 EO's like Primary key & Foregin key. And when u perform Commit on this all the value from ur beans will get saved to the database. But the Foreign u need to set independently using setAttribute method becoz it wont get saved by its own.
2) If i'm doing the validations at EO level, those setters and getters will be called before the Create(), Update() and Delete()
methods in the EOImpl class. Is that true?Yes, you are right it will get called for create and update operation but not for Delete.
Regards,
Gyan

Why does the Creative Cloud app steal focus multiple times when it starts up?

I am running Windows 8.1. When my system boots up, I've set Creative Cloud to launch at startup. I like to have the CC app running in the background so I can keep all of my apps up to date.
The problem is that the CC app steals the operating system's focus multiple times when it launches. For example, right after I log in to Windows, I'll usually launch Chrome. If I start typing something in the address bar, I am interrupted halfway through as the CC app launches and steals the focus. So then I reset the OS focus to Chrome and start typing again. And then CC usually steals the focus again after a couple of seconds.
I've verified that it is CC by disabling launch-at-startup. Doing this makes the problem go away.
This is completely obnoxious and unnecessary. If an app launches in the background, it shouldn't steal the focus once, let alone twice. This is software development 101. We are paying good money and should not have to deal with problems like this.

Here you go:
https://creative.adobe.com/share/a943d4fa-a03e-4f8f-a49e-d22019257dea
David

Aperture recently started listing Facebook albums multiple times when trying to select an album to share to.

Aperture recently started listing Facebook albums multiple times when trying to select an album to share to.

I've seen this duplication once or twice before - in my case it was with SmugMug.
Try removing the Facebook account from within Aperture, and then re-adding it. It should resolve the issue.

Is there any way to have FaceTime ring multiple times when someone wants to talk? Unless I am at my computer I would never I would never know someone wants to talk.

Not sure of the protocol and apologize if I have repeated my question which is "Is there any way to have Facetime ring (alert) multiple times when someone wants to talk? Unless I am at my computer, I would never know someone wants to make contact."

I reposted the question here where I'm getting advice:
http://discussions.apple.com/thread.jspa?threadID=1302031&tstart=0
S.

Why does my iphone only send one picture multiple times when i select multiple photos to send?

why does my iphone send one picture multiple times when i select multiple photos to send (via message or email)?

Are you sending via Camera itself?
That is, selecting a picture, then select forward link symbol from bottom left
then select another picture,
Each time make sure you see the blue check mark at bottom right of each selected picture.
The number of " # Photos Selected" should be displayed at the top.
Then select Mail or Message and transmit.

Customer is getting created multiple tims when it has multiple sites

Hi,
I developed customer conversion.
when I load data through conversion in R12 Customer is getting created multiple tims when it has multiple sites.
what are the things I have to take care to prevent this.
Please suggest me If any one has Idea.
Thanks & Regards,
Narendra.

Hi Gabriel,
Thanks for taking time to reply to my post.
When one of my collegue giving the print, there is only one spool which is getting created, but when I run the program there are multiple spools are getting created.
-Pradeep

My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear

My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear....please help!!!???

Do a reset
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Cairo-dock being spawned multiple times when clicking 'home' icon?

Similar Messages

Maybe you are looking for