Calculate total in minutes and seconds?
Is there a way to calculate the total in minutes and seconds in a table column?
Whether you set the date/time cell format to mm:ss from the pull down menu, or create your own custom cell format, the count and sum functions will return 0.00, because they expect to operate on numerical, not date/time data.
Instead, set the cell formatting to mm:ss for all cells. In the summation cell, you will need the following expression:
=(A2 + A3 + An)
The following screen captures will help.
Similar Messages
-
Can't calculate time in Appleworks - minutes and seconds
I can calculate hours and minutes, but not minutes and seconds. I've tried using leading zeros and colons, and leaving them out. The number format is set correctly (13:59:01), but I cannot get a calculation. Very frustrating.
Have tried all the obvious things I can think of.
Anyone have an idea?Got it. Must use single leading zero, not double. I hate spreadsheets.
-
Regarding function module to convert hours to minutes and seconds to minute
hi all,
is there any function module to convert hours to minutes and seconds to minutes....if so please guided me....i hav req like this...want to convert all those to minutes[seconds and hours]....Hi,
Use FM
SD_CALC_DURATION_FROM_DATETIME
Pass paramters like
I_DATE1 16.09.2008
I_TIME1 10:33:00
I_DATE2 16.09.2008
I_TIME2 19:00:00
and you will get the result as below..
E_TDIFF 8:27
8 hours and 27 minutes...
Now u can use this values of hours and minutes to get the exact wage type values... get the details from HR module and multiply it with the hours and minute and calculate it...
Use Offsets and get the hour and minute value from E_TDIFF
Hope it will solve your problem..
Thanks & Regards,
Naresh -
Formula for Distance/Velocity Returned in Hours, Minutes, and Seconds
I want to find the formula to calculate elapsed time in hours, minutes, and seconds when you are given the velocity and distance.
Distance(Miles)
MPH
Duration(h, min, s)
60,0
20,30
0
100,0
20,80
For an unknown reason the formula do not work for me.
Cells A2, B2, A3, and B3 are numbers.
In cell C2 I use formula : =DURATION(0,0,A2/B2)
Thanks
Carougeois -
I need help to convert hours,minutes and seconds to seconds.
Hi, I need help with the code on how to convert the hours,minutes and seconds to seconds. I don't know which formula to use so that I can get the results in total number of seconds. Thanks.
Jos ("when in doubt: parenthesize correctly")Bracist.You're more right than you'd known: last week I climbed over a safety
fence (which I wasn't supposed to do of course) to adjust the position
of an optical measurement device we installed in a huge production
machine in a factory. I stepped on some sort of hose; the end of that
hose broke loose and hit me straight in the middle of my lower jaw. My
front teeth feel wiggly now and my molars on the left of my lower jaw are
not what they used to be. This Wednesday I get that all fixed at some
dental clinic. Keep your fingers crossed because me+dentists == war.
My tongue continuously keeps on reporting craters and disaster ;-)
Jos, how's it going? Besides a possible loss of some teeth, I'm fine ;-)
My Spring/Hibernate journey continues. I'm trying out Hibernate 3.2
annotations and the Ant tools. So far, so good.Good to hear. At the moment I'm putting my teeth (sic) in that darn snmp
stuff which simply refuses to work the way I want it and besides that I'm
heavily involved in some of that SAP stuff. Spring is not in the vicinity for
me in the next couple of months sadly enough.
kind regards,
Jos -
How to conver this System.nanoTime() into Hours,minutes and second
I am getting my Total time with the help of this function ie System.nanoTime(). But i want to Display in the form of Hours,minutes and second.
So can any one plz tell me that how i will do this conversion.If it's less than 24 hours you can use Calendar. or SimpleDateFormat. Add the epoch time for some convenient midnight to the milliseconds value (divide nanos by 1000000).
Otherwise it's just successive division and remaindering.
Probably nanos is higher resolution than you need, milliseconds is easier. -
How to Convert frames into minutes and seconds
Hi,
does anyone know how to convert frames into time (minutes and
seconds). I need the users to view the swf with current time being
played and over time. I have 2152 frames in total and I want that
to be converted to time. Can anyone help me on this. I would really
appreciate it. It is very urgent!!!!
ThanksTime Indicator,
> does anyone know how to convert frames into time
(minutes
> and seconds).
That depends entirely on the framerate of the movie. At the
default
12fps, 12 frames would be one second; 24 frames would be two.
At 24fps, 24
frames would be one second.
> I need the users to view the swf with current time being
played
> and over time. I have 2152 frames in total and I want
that to be
> converted to time. Can anyone help me on this. I would
really
> appreciate it. It is very urgent!!!!
Judging by your four exclamation points, I'd say it's
definitely urgent!
Well, again, if you're at 12fps, 2152 frames would take 179
seconds, or 2
minutes and 59 seconds. I arrived at that number by dividing
2152 by 12.
Keep in mind, though, framerate is actually more of a
guideline than an
exact figure. Framerate determines the rate at which Flash
will *try* to
display content. On an especially slow computer, the Flash
Player may not
be able to keep up, and the same number of frames might
actually take more
time.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
How can I change the timer in the clock app to minutes and seconds instead of hours and minutes?
Is it wishful thinking or a false memory? It seems like there used to be a way to change the timer function of the clock from hours and minutes to minutes and seconds. I feel like there's a magic tap or secret swipe that I discovered but have forgotten. Am I totally delusional?
We may have to wait for an update. Aside from changing the country, I'm not sucre this can be done. There is no Health App in the System preferences and no way to modify from within the app. Weird.
If you go to Language & Region under general settings and choose any other country, you will get Metric. I have the opposite problem. I live in a Metric country and want my health app to be in lbs and inches which is what I am used to. -
How can i use minutes and seconds in my job interval
Sir,
I want to use minutes and seconds in my job interval.
suppose i want to run my job on 1:15:10 AM what will be the syntax. my code is below.
Declare
jobno number;
BEGIN
DBMS_JOB.SUBMIT(jobno,'DEL_DEPT;',trunc(SYSDATE + 1) + (1/24),'trunc(SYSDATE + 1) + (1/24)');
END;
Thanks in advance.Declare
jobno number;
BEGIN
DBMS_JOB.SUBMIT(jobno,'DEL_DEPT;','trunc(SYSDATE + 1) + 4510/86400','trunc(SYSDATE + 1) + 4510/86400');
END;
number of hours in a day = 24
number of minutes in a day = (24 * 60) = 1440
number of seconds in a day = (24 * 60 * 60) = 86400
4510 is the number of seconds in 1 hour 15 minutes and 10 seconds. -
Row 6 in this spreadsheet is the result of Row 2/Row 3 as evidenced by the formula listed while Cell Y6 selected. How can I make the values in this row appear as durations of minutes and seconds rather than 3-digit decimals? For example, rather than appearing as 9.84 I would like the value of Cell Y6 to appear as 9:50 or 9min 50sec. (obviously .84x60seconds 50 seconds). I tried changing the cell formats from "number" to "duration," but no change is made. Using the "duration" format does however work if I am manually entering the decimal value into the cell rather than allowing it to result from another caluclation within the spreadsheet. Is there a solution to this within Numbers '09? You can see why I would want the "pace" displayed in minutes and seconds. Thanks in advance!
RyanHi Ryan,
You wrote:
"The problem is that my "Distance" is a row of automatically generated values resulting from ((Row1/60)*Row 6). Changing the format of Row 1 to minutes causes row two to be expressed as a duration, which obviously it shouldn't because it is a distance. The spreadsheet has to be designed so that all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace). The rest of the cells must be automatically poulated as a result of formulas."
I'm assuming that where you say "Row 1" in this you mean "Row 2", which is labeled "Time" in the example in the OP.
In the original post, you presented a formula from cell Y6. Replacing the Header labels in that formula's cell reference with the Addresses of the referenced cells, the formula was:
Y6: =Y2/Y3
In this post, you are saying that Y6 contains entered data: "...all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace).
Which is correct?
Regards,
Barry -
Field with time in minutes and seconds
Dear community,
first of all, I am using Apex 3.1 on Oracle 10g, if this is necessary to know (yes I know, an old version, but given by the company I'm working for). After I've developed a few applications in Apex, thank to the forum and all the answers inside, I came to a problem that I could not solve:
I want to have a normal text field, where the user can enter a duration of an event (e.g. "3:45" or "2:30"). That duration will allways be in the format "MM:SS". No hours, no milliseconds... But how can I save the given values in the database, so in which format? A varchar would be a possibility, but I want to build a report later on, where there is a sum of the times. And how to get a sum of varchar?! But how to make it clear to Apex and Oracle DB that the users gives in a time and not a varchar? The only thing oracle offers is a date field, but I want to save a time and not a date!
Does anybody has a clue for me, cause it seems to me, that possibly I just don't know what I'm searching for, cause people must have had this problem before!?
THanks for your help!
Regards
hogeBut how to make it clear to Apex and Oracle DB that the users gives in a time and not a varchar? The only thing oracle offers is a date field, but I want to save a time and not a date!All APEX items are character strings, so implicit or explicit conversion is required when the values are stored in database columns. For the recommended <tt>INTERVAL DAY TO SECOND</tt> columns, use <tt>TO_DSINTERVAL</tt> to perform the conversion.
Use <tt>EXTRACT</tt> to get the minute and second values from the <tt>INTERVAL</tt> going in the other direction.
but I want to build a report later on, where there is a sum of the times.A user-defined aggregate function can be created to sum <tt>INTERVAL DAY TO SECOND</tt> values: here's an example.
APEX's lack of built-in support for summaries on <tt>INTERVAL</tt> types can be worked round by including the sum in the report query using a </tt>UNION</tt>:
SQL> with test_data as (
2 select
3 rownum n
4 , numtodsinterval(ceil(dbms_random.value(0, 3600)), 'SECOND') t
5 from
6 dual
7 connect
8 by rownum <= 10)
9 select
10 n
11 , t
12 , to_char(extract(minute from t))
13 || ':'
14 || to_char(extract(second from t), 'fm00') t1
15 from
16 test_data
17 union all
18 select
19 null
20 , sum_dsinterval(t)
21 , to_char(extract(hour from sum_dsinterval(t)))
22 || ':'
23 || to_char(extract(minute from sum_dsinterval(t)), 'fm00')
24 || ':'
25 || to_char(extract(second from sum_dsinterval(t)), 'fm00')
26 from
27 test_data
28 order by
29 1 nulls last
30 /
N T T1
1 +000000000 00:04:46.000000000 4:46
2 +000000000 00:07:05.000000000 7:05
3 +000000000 00:31:11.000000000 31:11
4 +000000000 00:53:16.000000000 53:16
5 +000000000 00:19:02.000000000 19:02
6 +000000000 00:57:12.000000000 57:12
7 +000000000 00:43:29.000000000 43:29
8 +000000000 00:03:11.000000000 3:11
9 +000000000 00:16:40.000000000 16:40
10 +000000000 00:20:49.000000000 20:49
+000000000 04:16:41.000000000 4:16:41A custom named column (row) report template with conditional templates can be used to layout and format such a report so that the summary row(s) are properly handled. -
How do I log the time in hours, minutes and seconds to a table
Hi
I'm a relatively new user of Labview. I am currently writing a program that logs the temperature of an oven and the current time to a table and graph. I am using a GPIB card to communicate with the oven. I have used the Get Date/Time string to get the time and the Decimal String to Number to convert the time to a number which I have then put into an array which goes to a table and graph. My problem at the moment is that the time is being logged in hours only. I need to log the time in hours, minutes and seconds. Can you tell me how I can do this?Hi,
I can see the setup now. The decimal string to number will only ever give the hours, since the ':' character is not part of a number, so won't translate. Use the code I attached previously to get the time as a timestamp, and then go from there.
I've made some modifications, although you'll need to alter the file save to take into account the double precision number
for the timestamp is now 3E+9 (since it's seconds since 1904!!), but since you're writing to a comma separated values (or tab deliminated) style file, this shouldn't be a problem. You could always do a textual save from the table instead.
Thanks
Sacha Emery
National Instruments (UK)
// it takes almost no time to rate an answer
Attachments:
temp time program.vi 98 KB -
How to insert degree, minute and seconds in a cell
How to insert degrees, minutes and seconds in a cell. Need operate trigonometry functions
Hi harrigorri,
Does this work for you?
Degrees
Minutes
Seconds
Decimal degrees
128
26
45
128.445833333333
Formula in E2
=B2+C2÷60+D2÷3600
Font size enlarged to show the division symbol ÷
Regards,
Ian.
Edit: 3600, not 360 -
Execution time in minutes and seconds
In the UUT Report, the Execution Time displays in seconds. How can I get that to display in minutes and seconds.
I'm just now getting to this, and I've decided to address this in the reportgen_html.seq. In the step labelled "Add Execution Time", the expression reads,
Locals.Header += "<TR><TD NOWRAP='NOWRAP'><B><LI>" + ResStr("MODEL", "RPT_HEADER_EXEC_TIME") + "</B><TD><B>" + (PropertyExists("Parameters.MainSequenceResults.TS.TotalTime") ? Str(Parameters.MainSequenceResults.TS.TotalTime, Parameters.ReportOptions.NumericFormat , 1, True) + ResStr("MODEL", "RPT_HEADER_SECONDS") : ResStr("MODEL", "RPT_NOT_APPLICABLE")) + "</B>\n"
I found the RPT_HEADER_SECONDS constant and changed it to _MINUTES and changed the string. I divided the Parameters.MainSequenceResults.TS.TotalTime by 60, and this all seems to work. The only thing that's not working is that I'm updating the Parameters.ReportOptions.NumericFormat, and no matter what I do it keeps showing me 13 decimal points.
The Parameters.ReportOptions.NumericFormat is set to %$.13f (but I've tried several variations).
I just want it to display something like 21.63 minutes. Also, what is the $ doing in that expression -
GPS coordinates with minutes and seconds always 0
I noticed the geotagged photos from my Android phone (Samsung Galaxy S3 with Android 4.3.1 Jelly Bean) have GPS coordinates always rounded to integers in Aperture. However when viewing the photo coordinates on the phone directly before importing in Aperture, or using a non-Apple tool (such as ExifTool), precise coordinates with minutes and seconds are displayed. After some research, I conclude this is an Apple bug. It affects iPhoto and Preview.app too (probably due to same underlying code reading Exif tags).
Did you experience the same bug? What phone and firmware were used to take the picture?
For the technical record, here's the bug (which I've notified to Apple). Internally (in the binary format of Exif tags), coordinates are represented by 3 values for degrees, minutes and seconds. Each of these values is represented by a rational number encoded with 2 integers (numerator and denominator). Most cameras will set an integer in the degrees values, and fractional part in the minutes and/or seconds. This format is properly decoded by Aperture. It is however valid format to set minutes and seconds values to 0, and a non-integer value in degrees, such as 70,764,776 / 10,000,000 = 7.0764776 deg. This format is not correctly parsed by Aperture.Yosemite has fixed the issue. Coordinates are now correctly displayed.
Maybe you are looking for
-
Can't enter a date into a table cell the way I want to
I am trying to put "Jul 2008" in a table cell but every time I remove focus from it, it changes to "Jul 1, 2008". This is very annoying, how can I turn this off?
-
N8 web browser start page, symbian anna
How to set my bookmarks as browser's start page, like it was option in old browser?
-
I found 2 cool search features in iTunes
I dont know if these are well known or when they were implemented but I just found them this morning by accident. I am using 10.0 On my Macbook Pro I have to use the Fn button but I bet these work on a desktop without the need to use the Fn button. 1
-
Firefox will no longer save a Bitmap. When I click "SAVE AS" , nothing happens.
When I right-click on an Internet image, and on the drop-down box, select SAVE AS. No box appears to show the current name of the image, or to allow me to enter a name of my choice. ... and image is not save anywhere. Up to now it has always worked p
-
I'll try to be short and sweet. My screen won't start on my my new MacBook Pro. The screen also will not go to sleep. Ant ideas. Hopefully somebody can Coe with an answer thanks in advanced.