Calculated field in qualified table
Hello
I have created three very simple calculations i qualified tables. The calculated field as well as the fields that make up the calculation are qualifiers.
None of the calculated fields are updated!
I have tried to hit the recalculate button and calculated fields in the main table work without problems.
Is this a known limitation? What can I do to trigger the update?
BR
/Alexander
Hi,
This is not the case.
Suppose in Qualified table, you have 4 fields one Non-Qualifier and three Qualifiers say FNAME, LNAME and FULLNAME all of type text.
Now for Qualifier Field FULLNAME i define Property Calculated = Yes and In Calculation Expression I write as:
CONCAT(FNAME,LNAME)
So on updating Qualifiers Value value of Qualifier Calculated field FULLNAME get updated.
Suppose intially for a record i have qualifiers value as
FNAME LNAME
Mandeep Saini
FULLNAME = Mandeep;Saini
when i update value for these two qualifiers for the same record
FNAME LNAME
Alexander Isacson
then value in for Qualifier field FULLNAME get updated to Alexander;Isacson
i tried this and it is working fine.
Hope it will Help you,
Rewards if found Useful....
Mandeep Saini
Similar Messages
-
Non-display fields in Qualified Table to be displayed in ItemDetail iView
Hello expert,
Is it possible to display a non display field in Qualified Table in ItemDetailed iView?
It seems not possible by standard iView configuration.
Is it possible to achieve by some minor coding? If possible, such code is appreciated.
Thank you.
DaleHi Dale,
Yes, it is possible , and no need to do any custome coding. You can configure non-Display field of Qualified table to be displayed in Standard item detail iview.
You have to select Qualified look up field if you are creating Item iview on Main table and complete all steps.
once you complete all steps, open Item iview , select Reletionship and qualified display field option .
now you can see qualiied tables in table , click on Edit , now you can see all fields of qualified table.. you can select any field (dis/non-dis fields).
Hopw this helps you.
Thanks & Regards,
Veera. -
How to create a unique group field in Qualifier table
Hi,
I am trying to use a qualified table in Product maintable like "Site items".
However I would like to have two non-qual field in that like 'Plant' and 'item#' which should be an unique combination.
I have tried to create a table(X) with the above two fields with display and another table (Y)that uses the table X for lookup (site-item) so as to make it dispaly and unique both. However when i am using this Y table as a lookup for the qualified table(site items) , not able to load data.
Error message:
"Import failed. Unable to find source column index for 'Site Item ID' field"
Another issue also not able to populate data for the qualified flds even if when able to load data without making a group unique field for this qualified table.
In MDM 5.5 sp4. Thanks in advance for any tips.
-reoHi Beena,
In the above post of mine I suggested you to use STRING data type.
As you are telling that when creating TABLE MAINTANENCE GENERATOR you are
getting an error saying that " Datatype STRING is not supported ". I tried this, what you said is right.
After your reply I did research on this and I also met my heads,
The conclusion is <b>IT IS NOT POSSIBLE TO GENERATE TABLE MAINTANENCE</b> for the table which is using STRING type. At last I can give you one suggestion, i.e., In the short text of that field write STANDARD TEXT name.So that whenever you want, go to this standard text, but the problem is you have to maintain it manually.
<b>Reward all helpful answers.</b>
Regards,
V.Raghavender. -
Can't insert a calculated field into af:table
VO: select a.pp, count(b.id) from a left join b on a.pp=b.pp group by a.pp
When I try to drag count(b.id) into my af:table I get an error message: "Could not create widget" "This operation has been cancelled since the drop target is not compatible with the data source."
a.pp is draged as a column well.
Studio Edition Version 11.1.2.4.0User, please tell us your Jdev version!
I'm not sure I understand what you have done. You can't drag an attribute from the select Claus onto an af:table. Have you build a vo from the sql query and dragged the whole vo onto a page and drop it as af:table?
Timo -
Qualified table - Text Normalized field
Hi all,
I have to create one field in qualified table as text normalized. But then once i select the option as text normalized in field type, the qualifier properties gets disabled. So how can i make a text normalised to be yes qualifier.
Also i want to search a record according to the text as well as text normalized. It means when the user will search a record it can do with text as well as with special characters. But the recorde found should be same.
Can anyone give the solution for this ASAP.
ThanksHi,
I have to create one field in qualified table as text normalized. But then once i select the option as text normalized in field type, the qualifier properties gets disabled. So how can i make a text normalised to be yes qualifier.
I am on MDM 5.5 SP6 Patch1 (Build: 5.561.48)
I tried it we cant Create Qualifier field of Type Text Normalized. So we can make use of it as only non-qualifier field only in Qualified Table.
We may hope this functionality in New MDM Releases.
For e.g if the record exist 121 and 1-2-1 should give the same result for the search.
For this Create field of type Text Normalized as Keyword Property = None always in Field Property of MDM Console so only Text Normalizied search give the same result for the search. i mean it will find both these two records 121 and 1-2-1 even if you write 121,1-2-1 or 1#2#1 for your Text Normalized field in free-form search of your Data Manager.
Hope it will help you,
Rewards if Useful....
Mandeep Saini -
Mapping issue with Qualifier table
Hi,
1. I have an issue after mapping all 3 non-qual flds of a qualifier table in main table getting the compound fld enabled but selecting it , not mapping automatically to the appropiate compound field in the destination side, but giving an error message
"unable to retrieve source record".
2. The second issue is that after mapping some of the fields and qualified table and loading the maintable data, saving the map but subsequently when trying to open the saved map , it is coming out with the usual main error window
SAP MDM Import Manager
SAP Import manager has encountered a problem and needs to close.
We are sorry for the inconvenience.
Debug Close
Appreciate your help/suggestion on this issues.
regards
-reoAnswer for Qn2:
First you have to map all the display fields to individual Source Fields..
Once you have mapped all the dispaly fields of the Qualified Table, you have to do value mapping for the Fields that require Value Mapping.
Ex: Source Field A -> Destination Display Field 1
Source Field B -> Destination Display Field 2
Source Field C -> Destination Display Field 3
Now Value Mapping where required should be done.
Once the value mapping is done, then you can create a Compound Field.
If you have done the previous steps correclty, then the compound field name is enabled for you to create Compound Field.
Now map the newly created Compound Field to the Qualified Lookup field of the main table.
Now you have to click on the Automap for value mapping.
Hope this helps.
Please reward if you find this helpful -
Lookup Flat Table and Lookup Qualifier Table
Hi,
Can any body confirm that if I will change the type of lookup-flat type field to lookup-qualifier type field. But the structure of Lookup Flat table and Lookup Qualifier table will be the same then the Java code written to populate the lookup-flat type field will work without any changes with its new type (lookup-qualifier).
Right now when I run the code after the above said changes, no error comes but no values is assigned to that field.
Another way to ask this question, can a simple Qualifier Lookup table(without having any qualifier type field) be used as like Lookup flat table.
I would appreciate if any body can help me in this regard ASAP.
Regards
Shahid NadeemHi Alok,
I think this Qualifier importing after main table import is quite trickier that you estimate.
1)Map all the fields of qualified table with source fields whther they are qualifiers or non-qulaifiers.
- we will only be able to view the Non Qualifier field in the qualified table.
2)Now the main step is when you finish all field and value mapping there will be also a Target field name on your qualified table with values of display field. this field must be mapped to a source field to import qualified table. do value mapping also.
- This target field is the linkup field you are talking abot i feel, and it is viewed only in the main table and, as i have only on one non- qualifier this will not be a combination of any display fields.
3)I am not abl eto see the Non -Qualifier in my main table
So how do i proceed.
Kindly guide
Thanks
Simona -
Assignments in qualified tables
Hello I have managed to create some assignments formulas for some of the fields in the main table of the customers repository, however now we would like to use this same functionality or similar to assign values for fields in qualified tables.
is this possible at all? or is there any workaround?
Thank you!You can assign values to the Qualified tables linked to Main table.
You will need to add the non qualified fields to the Qualified table and the qualified fields to the main table record.
Look at the API and you will find the ways to create/update qualifier values.
Hope it helps.
Avinash. -
Expression logic for qualified tables
Hello Experts.
I am searching for an expression that can manage the following requirements:
Different records of a qualified table belong to one record of the main table. One value that belongs to a certain combination in the qualified table should be automatically transferred to a field in the main table. For example there is one main table (MAIN) and a qualified table (QT) with at least two fields.
Main table (MAIN) with some fields
Qualified table (QT) with Field 1 and Field 2
I tried following expression: IF(QT.Field 1 = NAME, QT.Field 2). But the expression doesn'tt work.
How can an expression work with a certain combination of a qualified table? Has anybody an idea how to solve such a mystery?
Thank you in advanced,
AnjaHi Anita.
I have the answer: You need an additional field in qualified table. This field is filled during import with the concatenation of all field values of the QT record.
Qualified table with field 1 and field 2 look then like this
Field 1: Name
Field 2: Anita
Field Conca:Name.Anita
Now it is possible to build expression that can evaluate the string of the concatenation field.
Thanks for your help,
Anja -
Validation upon qualified tables
Hi,
Can anybody help me in writing one validation for comparing the field X of two qualified tables A and B.
The X values comes from two different client systems. The need is to check and compare the two values.
BR SKHi Susil,
Create new Validation in the main table only
Select the Field X from qualified table1 and another field from qualified table 2.
i.e. say Qualified1 and Qualified2 are the two main table fields of type Lookup Qualified then the validation expression would be
Qualified1.FieldX = Qualified2.FieldX
But the above validation will be helpful when you assign the value of FieldX in both the Qualified tables for same record.
If I interpreted your question wrongly then please let me know.
Regards,
Jitesh Talreja -
Calculated field with decimal place
Hello,
if I create calculated field in a table using formula e.g., ColumnName/ 60, where format of ColumnName is INT (total ammount of minutes) in order to get hours, I get only integer part, not decimal. E.g., 80 (minutes)/60 =1.3333 but, in calculated field
I see only 1 hrs without possibility to change format of the field.
Can calculated field be used on this way? (My wish is to get 1.3 in that field)
How?
ThanksOf course the calculated field/column can not be an INT, if it is then change that.
Does something like this work?CAST(ColumnName/60 AS Decimal(10,2)) -
Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
NormanHi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman -
Can we Sum the Values in the Qualified table Fields??
Hi All,
I have a requirement where..Each material has multiple UOM's, So designed it as Qualified Table.
UOM is a Qualified table.
UOM Type is NON Qualifier.
Weight Qualifier - Integer field
Length Qualifier - Integer Field
Now in main table there is a field called Net Weight.
I need to write a validation which checks Whether Sum of ''Weight'' in Qualfied table is Equal to ''Net Weight'' for that record.
So if there are 5 UOM for 1 material, then the validation should check whetehr the Sum of all 5 Weights in QT is equal to ''Net Weight'' Field in Main table!!!
Did anyone faced a similar issue, If yes How did you solve it!!
Please Help!!
KR
JohnHi John,
Try this:-
Net Weight = SUM(UOM.Weight)
Here SUM is the standard function thats u need to select from list of functions.
Please let us know if it works..
Thanks,
Mahi -
Hi all
Can we able to enter the data in Qualified table field while creating the record in portal thru iView??
if posssible please let me know how to do the same in portal, i mean which type of iview we need to use to achieve the same??
Regards
SunilHi Sunil,
As mentioned above you need to use Item details iView and select the desired Qualified table fields which are part of your main table. Now select the Relationship and Qualifed Display Fields radio button. Here a seperate entry will be made for each lookup Qualified field (which is part of main table) which you have selected in the item details view.
Now select a particular Qualified field radio button and select the EDIT button.
Now you will be able to select all the desired Qualifiers and Non-qualifiers from the Available Columns.
I have tried this scenerio at my end and its working fine.
Regards,
Kaushik Koli. -
Expression with qualified table fields
Hi all!
I have 2 doubts concerning the free-form search and expressions using qualified table.
We're implementing SRM-MDM Catalog. Here is the scenario
The search is done in the Main Table (Products). The qualified table (Contract) has the following fields:
Contract ID: Non-Qualifier
Contract Item: Non-Qualifier
Contract Category: Non-Qualifier
Lower Bound: Non-Qualifier
Amount: Qualifier
Currency: Qualifier
Obsolete: Qualifier
There are 2 records in the Contract table assigned to the Product in main table:
123-1-Normal-1-100-BRL-False
456-1-Normal-1-250-BRL-True
1st doubt:
Using the free-form search, if I set the field Contract-Amount to be less than 150, only the record 123-1-Normal-1-100-BRL is listed in the result, which is ok. But if I enter in the expression option the formula Contract.AMOUNT<150, both records are listed:
123-1-Normal-1-100-BRL
456-1-Normal-1-250-BRL ???
Is this formula wrong?
2nd doubt:
The Contract info isn't a mandatory information. It's ok to have a product in the main table without a contract assigned to it. This can happen for example if all contracts for a product are obsolete. In the named search, if I select all products where obsolete equals to 'FALSE', only the records of the main table that have at least one valid contract are listed. As the contract info isn't mandatory, I was expecting a different behavior. Also the records that don't have a valid contract should be listed, but the contract information should be blank. Is there a way to do that?
Thanks!check out these tables,
VBAK Header Data
VBAP Item Data
VBAG Release Data by Schedule Line in Sch.Agrmt.
VBUK Header Status and Administrative Data
VBUP Item Status
VBRL SD Document: Invoice List
VBPA Partner
VBKD Business Data
VBKA Sales activities
VBEP Schedule Line Data
VBRK Billing: Header Data (invoice)
VBRP Billing: Item Data (invoice)
VBFA Sales Document Flow
VTTP Shipment item
regards,
seenu
Maybe you are looking for
-
I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to op
-
The code does not print out like it shoud. What am I doing wrong? Thank you for help public class test { public static void main(String ... args) { String text = "array"; char[] textArray = text.toCharArray(); System.out.p
-
Convert ical to excel,word,or pdf document?
Can I convert ical to a pdf,word,excel document?
-
Live eSeminar: Migrating to and Benefiting from Structured Authoring using Adobe FrameMaker 9
A live seminar will be held by Adobe's RJ Jacquez on Friday July 24th. The background info on this is: Migrating your existing unstructured FrameMaker documents, or Microsoft Word documents to Structured documents in Adobe FrameMaker 9, is much easi
-
Is there a way to take the bad words OUT of a song?!!
Like lets say there is a song but you cant find one that is clean can u take it out by your self when u bye it?