Can I reference a table with a calculated value?

I have monthly tables named by Roman numerals that correlate to the each month(Jan = I, Feb=II, Mar=III) and in a cell, want to reference the current month's table by using ROMAN(MONTH(TODAY()) :: B2 because it seems I cannot use numbers for table names as a reference. Although, this throws a syntax error at me too. Anyone have a solution or an alternative? Thanks!
I'm on iCloud Numbers, btw.

=INDIRECT(ROMAN(MONTH(TODAY()))&"::B2")
I don't know what problem you are having with table names that use regular digits. If your table was named "3" instead of "III", the formula would be:
=INDIRECT(MONTH(TODAY())&"::B2") which, on the day ofthis post, corresponds to 3::B2

Similar Messages

How Can I Export A Table With Its Entries ( values )

Hi guys,
How can i export a table with the entries that the table is populated with ??!!
Best Regards,
Fateh

To export a table and its data you can do it a number of ways.. Do you have access to SQL Developer? If not you can do it through the APEX SQL Workshop..
Under SQL Workshop, Utilities, Data Unload, To text (or XML, whichever you are more comfortable with..).. Select your schema, click next button, select the table, click next, select the columns you want exported (select ALL ITEMS in the select List), click next, on optionally enclosed by I usually enter a " (Sometimes I have long strings in columns), click the include column names checkbox to get the column names at the top of the document, click unload data button..
To get the ddl (code to build table) Sql Workshop, utilities, generate ddl, create script, select schema, select next, click table checkbox, select next, click the checkbox of table you want to get ddl for...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

How can I build a table with the time values of a timer from a while loop

Hi:
I have a question concerning building a table:
Every 100ms I read a value from a sensor (while loop with a timer). I would like to build a table with the actual time and the concerning value. For example:
0msec         1V
100msec     2V
200msec     3V
300msec     4V
etc.
If I use the Express VI for building a table, I always get the date and time, but I don't need the date and the time is in the following format: HH:MMS, which is nonsensical for me as I can't differentiate within msec. Can I change the format anywhere?
Can I also save the table to a file or even to an Excelsheet? How can I do that?
Thanks for your help!

Hi Craig:
thank you very much. To solve the mystery : ) :
I want to drive a stepper motor with a specific frequency. To get the current degree value of the motor I would like to measure the current time (from the beginning of the move on). (With a formula I get the degree value out of the time)
Concurrently I would like to get data from a torque sensor and from a pressure sensor. That's why I asked you about the time and the table. The measurement should start with the movement of the motor. How can I do that? Right now I have different block diagrams (different while loops) (see attachment) and I would like to put them in one.
I haven't done the block diagram for the pressure sensor yet, so there is only the one for the torque sensor and the one for the motor.
I also would like to set a mark in the table when the voltage value of an analog input gets under a specific threshold value. Is that possible?
I'm sorry, I'm a novice in LabVIEW. But maybe you can help me.
Thank you very much!
Steffi
Attachments:
motor.vi ‏238 KB
sensor.vi ‏59 KB

Can I replace my table with divs, in this context?

Hi,
I'm trying to accomplish something without the use of tables. Maybe someone can tell me how.
- The skeleton is basically made up of 3 newspaper-style columns.
- Their widths aren't very likely to change -- their widths will be fixed -- so this eliminates one problem right off the bat, right?
- The first column (left) is a sidebar menu, and it has its own distinct background image pattern.
- The other two columns (mid and right) share a flat background. Right now, I'm just calling the same 1k JPG twice (once in each of those two columns/cells). I find this simpler than creating an unnecessary container just for the common background.
- All 3 columns begin at the same line (0).
So far so good, the fixed widths and the fact that they all begin at y=0 makes this easier than it otherwise could have been.
Now here's the tricky part :
- The amount of content is different from page to page (some pages are longer than others), and the amount of content per column will also vary individually (so the sidebar might be the longest column in one file, the mid column could be the longest element in the next, and so on...)
- The layout is horizontally centered.
- All 3 columns need to end at the same spot, which will be dynamic from page to page (in other words, the backgrounds of these columns need to stretch/repeat until the end of the column with the most content, whichever of the 3 columns that may be on any given page).
- There is a page-end image to display that is as wide as the combined 3 column widths.
As you can imagine, using a table with 3 columns makes this easy as pie. But I was told to avoid tables whenever possible, so if there's an easy way to justapose 3 divs and have them behave like 3 cells of the same table -- without too much markup -- I'd give it a try, and potentially leave tables behind for good.
It would be easy enough to create a large container div, horizontally center it, and left-float 3 divs inside it... but this doesn't address the problem of having to have those backgrounds repeat all the way to the end of the site. The way I just described, the backgrounds would vertically end wherever the content of that individual column ends.
And since we know divs don't like height=100%, well...
Any help would be appreciated.
Thanks!

Have you tried using Faux Columns?
http://www.alistapart.com/articles/fauxcolumns/
or Project Seven's Equal Height Columns script?
http://www.projectseven.com/tutorials/css/pvii_columns

How can I treat many tables with one handler(?) ?

Hello~
I am applying BDB to my embbeded system not rich in resource.
Some *.db files are called frequently.
But, Opening a *.db file [db_create(&dbp, NULL, 0) AND dbp->open] takes a long time in BDB
So, I loaded this functions onto a booting module to call opening functions just one time.
And all D/B handlers(?) are loaded in all run time
But, a D/B handler takes about 360Kbytes. And there are too many *.db files(10) where a table is
How can I treat many tables with one handler(?) ?
Or
If you have the most efficient way to call openning functions just one time, please tell me
Thank you

Hello,
Opening the database handles is expensive due to
opening a file on disk. Is it possible for the application
to use in-memory dbs? Otherwise is there a way for the application
to cache the DB handles and reduce the overhead associated with
opening and closing them?
Thank you,
Sandra

How I can stop the combo box with list of values from fireing validations

Hi I'm using Jdeveloper 11.1.2.3.0
Using Hr Schema employees table
I Display employees data in af:table
and I make List Of values on Department_id filed to easy change the employee department
and another one on Job_id filed
and Imake them UI Hints as ( combo box with list of values ) in the employeesVO
the problem is when I Select a value from department or jobs ( combo box with list of values )
fires the entire filed validations for mandatory atributes
Note : the af:table Property ( contedelivery) is set to (immediate )
How I can stop the combo box with list of values from fireing validations

check it out.,
http://andrejusb.blogspot.in/2012/09/what-to-do-when-adf-editable-table.html

How to create table with list/map value binding

I need to display few values in a tabular format. Is it possible to create adf table without having value binding to a VO object. Can I make a table with some list/map combination.
I want to change the display format with minimum change in the application. Hence I am looking for a change to define a list/map and map it with the table.
Following is the structure I need to display in.
|     |Header1|Header2 |
|_______|_______|_______|
|Txt R1 |value 1 |Value 2 |
|_______|_______|_______|
|Txt R2 |Value 3 |value 4 |
|_______|_______|_______|
All the views does not have any relation. Hence I should not create a VO and adding rows of the VO object.
Edited by: Jaykishan on Jun 10, 2011 11:34 AM

Yes, you can do it. Create a pojo with the properties(column) you want to display in the table and create a list with the instances of pojos and then you can populate your table using the list.
Sample:
//POJO
public class SamplePojo {
private String col1;
private String col2;
public SamplePojo(String col1, String col2){
this.col1 = col1;
this.col2 = col2;
//add setter and getter methods
//Inside bean, prepare a list with pojo instances (Assume a getter exists for pojoList)
pojoList = new ArrayList();
pojoList .add(new SamplePojo("Value1", "Value2");
pojoList .add(new SamplePojo("Value3", "Value4");
etc.
//Inside jspx
<af:table value="#{<Bean>.pojoList}" var="pojo" ...>
   <af:column headerText="Header1" ..>
     <af:outputText value="#{pojo.col1}"/>
   <af:column>
   <af:column headerText="Header2" ..>
     <af:outputText value="#{pojo.col2}"/>
   <af:column>
</af:table>HTH
Sireesha

Reference all tables with the same name

If I have multiple worksheets that each have an identically structured table "Test", is it possible to create a formula in a cell of another worksheet that references the same range of cells in every table "Test"? So far I haven't found a way to reference cells in a table with an ambiguous name without having to prepend the worksheet name to the reference like so: 'Worksheet 1' :: Test :: B3:C4. What I want to be able to do is say Test :: B3:C4 and have the formula reference B3:C4 in all "Test" tables.
Thanks!

You've picked the correct descriptive term. Such a reference would indeed be "ambiguous".
You might be able to reference a set of disconnected ranges of cells, but each range would have to be explicitly described.
You might be able to collect the values in the cells into a single array in a single table, then reference that array in your formula.
Regards,
Barry
PS: "Sheets" in Numbers have little in common with "Worksheets" in MS Excel. Using the Numbers vocabulary can help keep the distinction more clear, and avoid unwarranted expectations.
B.

How can I represent a table with JSF ?

Hi,
I want to replace my (html) table with a JSF representation..
I found the tag <h:dataTable>, and this defines <h:column> but there is no <h:row> !!
There is an attribute rows to represent the number of rows to display, but how can I add these rows ?
Thank you

<h:panelGrid columns="2">
</h:panelGrid>will produce table with 2 columns and if provided, the next 2 columns will appear in the next row and so forth...

How can we create a table with more than 64 fields in the default DB?

Dear sirs,
I am taking part in the process of migrating a J2ee application from JBoss to SAP Server. I have imported the ejb project.
I have an entity bean with 79 CMP fields. i have created the bean and created the table for the same also. but when i tried to build the dictionary, i am getting an error message as given below,
"Dictionary Generation: DB2:checkNumberOfColumns (primary key of table IMP_MANDANT): number of columns (79) greater than allowed maximum (64) IMP_MANDANT.dtdbtable MyAtlasDictionary/src/packages"
Is it mean that we can not create tables with fields more than 64?
How can i create tables with more than 64 fields?
Kindly help,
Thankyou,
Sudheesh...

Hi,
I found a link in the help site which says its 1024 (without key 1023).
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/069940ccd42a54e10000000a1550b0/content.htm
Not sure about any limit of 64 columns.
Regards,
S.Divakar

Comparing Data in col of 2 tables - with a Calculation

There are 20 records in 2 different tables (A&B). The records pertain to periods between Jan 07 and March 09. There is a business logic that says that all the 15 records which fall between Jan 07 and Dec 08; their amount needs to be changed in Table B. While the amount for remaining 5 records that fall between Jan 09 and March 09 should remain the same. The formulae to be applied for the first 15 records is “amount/.50*0.125” and this result amount should reflect in the new table under the amount column.
Now the task to ensure that the calculation has happened correctly from Table A for those 15 records that fall between Jan 2007 and Dec 2008 in Table B and that the amount is the same for records for period after Jan 2009. I’d only be testing that the new amount after the business logic calculation reflects in the new amount column of Table B.
A sql statement is required for this.
Thanks,
Dush

you might want to give this pseudo code a try
update [2nd table]
   set amount = (select t.amount / .50 * 0.125
                   from (select id, rownum rn, amount
                           from [1st table]
                          where period_date between '01-JAN-07' and '31-MAR-09'
                         order by id) t
                 where t.rn <= 15
                   and t.id = [2nd table].id)
where id in (select t.id
                from (select id, rownum rn, amount
                        from [1st table]
                      where period_date between '01-JAN-07' and '31-MAR-09'
                      order by id) t
               where t.rn <= 15)still it's better if you can post the actual tables, columns, and some sample data

Can I reference a table indirectly (Project Siena)

I'm trying to work around the 15,000 row limit since I have a lot of data I want to pull into my app. I was able to create ten separate tables, and I have a drop down where I want it to change the table for a view based upon what's selected.
The dropdown is populated from a table with two columns, one is the label for the dropdown, the other is the name of the table i'd like to reference.
Is it possible to do any indirection like this?

I'm having the same issue, but don't fully understand what was answered. If my project has four tables:
TableFinder (Column is "TableName")
Table1 (Columns are "ID" and "Name")
Table2 (Columns are "ID" and "Name")
Table2 (Columns are "ID" and "Name")
I also have a Drop Down Box named "DropDown1" (Items is TableFinder!TableName)
Additionally, I have a Gallery (called "Gallery1")
How do I change the data for Gallery1 from Table1 to Table2 to Table3 when I select a TableName in DropDown1?
Thanks!

How can I update the table with a single query for...

I have a table with columns C1 and C2.
C1 C2
A1 null
A1 null
A1 null
A1 null
A2 null
A2 null
A2 null
A3 null
A4 null
A4 null
I want to update my table with a single query so that I would have data like
C1 C2
A1 1
A1 2
A1 3
A1 4
A2 1
A2 2
A2 3
A3 1
A4 1
A4 2
The updated column C2 has the values like serial no grouped on the column C1.

SQL> create table mytable
2 ( c1 varchar2(2)
3 , c2 number(2)
4 )
5 /
Tabel is aangemaakt.
SQL> insert into mytable (c1)
2 select 'A1' from dual union all
3 select 'A1' from dual union all
4 select 'A1' from dual union all
5 select 'A1' from dual union all
6 select 'A2' from dual union all
7 select 'A2' from dual union all
8 select 'A2' from dual union all
9 select 'A3' from dual union all
10 select 'A4' from dual union all
11 select 'A4' from dual
12 /
10 rijen zijn aangemaakt.
SQL> select * from mytable
2 /
C1                                     C2
A1
A1
A1
A1
A2
A2
A2
A3
A4
A4
10 rijen zijn geselecteerd.
SQL> merge into mytable t1
2 using (select c1
3              , row_number() over (partition by c1 order by null) rn
4              , rowid rid
5           from mytable
6        ) t2
7     on (t1.rowid = t2.rid)
8   when matched then
9        update set c2 = rn
10   when not matched then
11        insert values (null,null)
12 /
10 rijen zijn samengevoegd.
SQL> select * from mytable
2 /
C1                                     C2
A1                                      1
A1                                      2
A1                                      3
A1                                      4
A2                                      1
A2                                      2
A2                                      3
A3                                      1
A4                                      1
A4                                      2
10 rijen zijn geselecteerd.Regards,
Rob.

Can I create a table with more than 40 columns ?

Hello,
I need to organize my work with a table and need about 66 columns. I am not very good with Numbers but I know a little bit of Pages. I cannot find a way to create a table with more than 40 columns... Is it hopeless ? (Pages '08 v. 3.0.3)
Thank you all

It's never too late to try to teach users that the Search feature is not only for helpers.
The number of columns allowed in Numbers is not a relevant value when the question is about Pages '08 tables.
I tried to copy a 256 columns Numbers table into a Pages '09 document.
I didn't got a table but values separated by TABs.
I tried to convert this text range in a table and got this clear message :
If I remember well, in Pages '08, the limit is 40 columns.
It seems that you are a specialist of inaccurate responses, but I'm not a moderator so I'm not allowed to urtge you to double check what you wrote before posting.
Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 14:57:58
Please :
Search for questions similar to your own before submitting them to the community

Unable to create table with column default value with date interval

Please help to create table with calculated date defaullt value:
CREATE TABLE emp (
birth_date DATE DEFAULT sysdate + interval '3' day NOT NULL
or
CREATE TABLE emp (
some_date DATE,
birth_date DATE DEFAULT some_date NOT NULL
or
CREATE TABLE emp (
some_date DATE,
birth_date DATE DEFAULT some_date + interval '3' day NOT NULL
below syntax error:
TT1001: Syntax error in SQL statement before or at: "+"

I'm afraid this is not possible; as per the SQL Reference, TimesTen only supports 'constant expressions' for the DEFAULT clause and none of these are constant expressions.
Chris

Can I reference a table with a calculated value?

Similar Messages

Maybe you are looking for