Webcenter Deployment issue - mdsid not found

I am currently working with Oracle Webcenter 10.1.3.2 and trying to deploy the application to standalone OC4J.
I am getting the below error:
Error getting MDS MO : mdsId=/oracle/adf/portlet/BIWCPortletProducer_1202175324609/ap/E6default_e73c379b_0117_1000_8003_0a030f4d69ca.pxml
I checked and ensured that .pxml file exists in the above location.
Has anyone come across this issue?

There are a few things to check:
- check the webcenter developers guide on how to deploy a webcenter app. The deployment part alone is 180 pages, and contains a lot of info!
- check if you use a webcenter deployment profile. This is important, since the ear needs some more files than an ordinary ear.
- you should use a webcenter standalone oc4j to have the necessary libraries. JDev 10.1.3.3 has this as an extension.
- when deploying, JDev asks for an mds location to store the customisations. Take care not to use the same location where JDev stores the development mds information, but a new directory.
- when deploying on another server, use the predeployment tool.
Jeroen van Veldhuizen

Similar Messages

EM Configuration issue : file not found

I have installed Oracle 10g db on Linux & my Enterpise Manager Url is not working
When I give a command emctl dbconsole start ,I get the an error EM Configuration issue : file not found
Help is appreciated.
Savitha

Did you ever get an answer for this? I am experiencing teh same error after running the upgrade script.

Syncing files constantly issue & page not found when trying to access a file on web

Can anyone assist with syncing issue. Syncing runs all day and new files are not syncing. I can see the files in web browser (not in desktop APP) however when I try to access the files I get page not found.
I went into archive (after reading all the forums I coudl find) and I think there are a couple of damaged files as when I tried to delete them I received an encountered 'error' and could not permanently delete.
I need assistance to get my syncing fixed, and page not found fixed.
Help!
Thanks@

There can be a number of causes for not being able to access file form web browser. One, you might be writing to wrong directory. Two, you might not have sufficient privileges to either write to directory or overwrite files already in that directory. From your description, it's the latter of the two, so you need to get a hold of creative cloud support and get file/folder permissions fixed. Good luck.

Oracle DB 11g Release 2 Installation in Solaris OS for SAP - issue: Files not found

Hello All,
Having problem during my installation of oracle DB.
the installer keeps on prompting that files not found and the directories and files permission seems different from expected
I attached the images of the files the installer is looking for and also the /oracle/<SID>/11ginstall_11202.log
I also attached the thing i put in ENV command
Not sure if its the issue in the oracle profile or installer itself or wrong input
please help

Hi Frogoso,
Please have a check on the known issues SAP note for Oracle installation.
Section G: is related to Solaris
1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
You may re-check whether all the Solaris related pre-requisites are met before executin RUNINSTALLER.
Suggestion here would be to go with latest available Oracle patch 11.2.0.4 as you are installing a new system.
Hope this helps.
Regards,
Deepak Kori

After deployment got "404 Not Found". How to find the correct URL?

To the experienced:
In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
I then used this url to invoke the deployed application in a browser:
http://localhost:8888/ZB/faces/staff/login.jspx
But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
Many thanks for your help!
Newman

Hi, Arun,
Thank you for the suggestion. I tried it but got the same error.
I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
http://localhost:8888/ZB/faces/staff/login.jspx
And I got the same "404 Not Found" error.
There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
All ideas and suggestions are very much appreciated!
Newman

Shared Service issue. Not found 404

Hello. Everyone.
I installed and configurated EPM 11.1.2.3.
When I opened Shared Service URL , I get an error message that "Not found 404".
WorkSpace can display.
What happen?
I run validation.bat .
Shared Services URL is error.
Workspace URL is not error.
Where is an log file of validation.bat ?
OS:Windows Server 2003 SP2
DB:Oracle database 11.2.0.1.0
IIS ver6.0
I use Oracle HTTP Server.
Please give me advise.

As always you should check the logs, don't know where the logs are then go to the logs section in the documentation Introduction
Cheers
John
http://john-goodwin.blogspot.com/

7u45: MacOS X: Deployment Rule Set not found?

Per the Deployment Rule Set packaging instructions:
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/deployment_rules.html#package
"Install the DeploymentRuleSet.jar file on your users' systems in the following directories:
On Windows platforms, install the file in the <Windows-directory>\Sun\Java\Deployment directory, for example, c:\Windows\Sun\Java\Deployment.
On Mac OS X and UNIX platforms, install the file in the /etc/.java/deployment directory.
To view the active rule set, see the Security section of Java Control Panel."
I am able to use and view the rule set on Windows and Linux platforms, but the deployment rule set is not seen under MacOS X (10.9 Mavericks).
I placed it in:
/etc/.java/deployment/DeploymentRuleSet.jar and yes, it is properly signed, in the correct format, etc. Identical file works fine under Windows and Linux.
Anyone else have this issue?

Hurray!! I finally found out how to get the JCP to display the DeployementRuleSet.jar file.
The path in the documentation (/etc/.java/deployment) is wrong (at least on Mac OSX 10.7.5)!.
I went through the decompilation of the ControlPanel source code, and found out that the expected path for the jar file is
/Library/Application Support/Oracle/Java/Deployment
Note:The Deployment directory has to be created

Time Machine Issue -- Error not found anywhere

I am having a Time Machine issue in which the error displayed cannot be found anywhere: Google, Bing, Apple, etc.
The error message is: "Time Machine couldn't find some of its settings on the backup disk "BACKUP". Make sure the backup disk is connected, and that other connected disks don't use the same name as the backup disk. Last success backup: 6/21/10 at 2:52 PM"
The other odd thing is that my Time Machine folders are empty. The directory structure is: BACKUP > Backups.backupdb > TIGERMASTER > {empty}. (TIGERMASTER is my MacBook Pro's name.)
When I do a Get Info on the directories, it reports Zero kb on disk with 0 items. When I do a Get Info on BACKUP, it reports 833GB used, with about 140GB free (it's a 1TB external HDD).
Disk Utility sees folders and files, however: "Number of Folders:583,061 / Number of Files:3,725,350"
Um, help?!
My Mac's Info:
*Model Name: MacBook Pro*
*Model Identifier: MacBookPro3,1*
*Processor Name: Intel Core 2 Duo*
*Processor Speed: 2.4 GHz*
*Number Of Processors: 1*
*Total Number Of Cores: 2*
*L2 Cache: 4 MB*
*Memory: 4 GB*
*OS: 10.6.4*
*Ext. HDD: LaCie 1TB*

Here are the last few lines of the error output. The entire output was laden with red text, which indicates errors:
+Invalid node structure+
+Invalid record count+
+Rechecking volume.+
+Checking Journaled HFS Plus volume.+
+Invalid node structure+
+The volume could not be verified completely.+
+Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.+
The most common output error (there must have been over a hundred) looked like these:
+Overlapped extent allocation (id = 10715055, /.HFS+ Private Directory Data+
+/dir_10712993/Mobile Backups/8884195JY7H/Structured/4eea38a1ac5f110bcb3d0a10ce4d571300ab85aa.mddata) +
+Overlapped extent allocation (id = 10715056, /.HFS+ Private Directory Data+
+/dir_10712993/Mobile Backups/8884195JY7H/Structured/4eea38a1ac5f110bcb3d0a10ce4d571300ab85aa.mdinfo) +
+Overlapped extent allocation (id = 10715057, /.HFS+ Private Directory Data+
+/dir_10712993/Mobile Backups/8884195JY7H/Structured/4f01e5e3411040bbec70277a704bfeb5b735d336.mddata) +
+Overlapped extent allocation (id = 10715058, /.HFS+ Private Directory Data+
+/dir_10712993/Mobile Backups/8884195JY7H/Structured/4f01e5e3411040bbec70277a704bfeb5b735d336.mdinfo) +
I tried to mount the disk, but it gives me the error: "The disk BACKUP could not be mounted. Try First Aid on the disk and then retry mounting." Of course, I can't back up any of the files because I can't mount the disk.

Error while deploying EAR : TLDs not found?

Hi all,
I encountered this error while trying to deploy an EAR using the NWDS for Netweaver CE 7.1.
C:\usr\sap\MIT\J00\j2ee\cluster\server0\temp\deploy\work\deploying\ohs.ear1239681726594\convertwarfile\FCKeditor.tld (The system cannot find the file specified)
I doublechecked the WAR inside the EAR file, and I found that the TLD is indeed in the WEB-INF directory of the WAR. This is the correct place to put it, yes?
Should I reference to it in some other place? or should I move the TLDs to a different directory?
Thank you for your assistance,
Rajendra

Hi, bojidar.
No I don't think there are multiple copies of the TLD in my archive. I suspect the problem lies on the fact that I imported the WAR from my tomcat deployment instead of building the archive directly from the Netweaver Development Studio. Some SAP specific deployment descriptors probably wasn't there.
I have switched to trying to deploy directly from the NWDS though, and although I still haven't managed to deploy successfully, the problem is now different. I'll post about it in another thread.

IPad and iTunes synching issues - device not found

I do not see my iPad as an option in iTunes.. My computer recognizes my iPad, but does not give me an option to choose it from my devices, as I would my iPod. There is an window that pops up, I believe my computer thinks it is a camera. Any suggestions? Thank you in advance for your help!

This article is more specific to the "not recognized" issue on Macs:
http://support.apple.com/kb/TS1591

Unlock Page Issues: IMEI not found (errorCode.ULP2003)

Hello ,
I am not an at&t customer and would like to unlock my device. I bought the at&t device off the motorola online store but later realized that the device is locked to at&t. I found this link when I was looking for a solution online. When I try to unlock the device using the device unlock page I get this message saying that the IMEI number I have entered is not a valid one. Following are the details that you requested :-
Cell number - ***
Device Make - Motorola X2 (2014)
Device IMEI - ***
Email address - ***
[Edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]

Hello!
Cell and/or account number *****
Device Make/Model Samsung S5Active
Device IMEI *****
Email Address *****
I get "unknown IMEI number" when I try to fill out the unlock code request- my account is, I believe, in good standing, the phone is legal (purchased through Costco in December), etc, etc
THANKS!
[Edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]

JMS compiling issue (class not found??)

I have installed JMS and the Sun Application Server and am having an odd problem. Here is my code:
Subscriber2 class:
import javax.jms.*;
public class Subscriber2
     private MyMessage2 msg;
     public Subscriber2(){}
}MyMessage2 class:
public class MyMessage2
     public MyMessage2(){}
}I am using the following two lines to compile the two programs (in this order, too):
javac -classpath C:\sun\appserver\bin\j2ee.jar MyMessage2.java
javac -classpath C:\sun\appserver\bin\j2ee.jar Subscriber2.java
For some reason, I am getting an error during the compilation of Subscriber2.java
Subscriber2.java:5: cannot resolve symbol
symbol : class MyMessage2
location: class Subscriber2
private MyMessage2 msg;
Why can't it find the MyMessage2 class? They're in the same directory. What is going on here?

Since it is indeed a classpath problem, I would suggest to read the following, as to not have again the same type of problem :
http://mindprod.com/jgloss/classpath.html

Installing issue excel2010 not found

I'm trying to install the data mining addin for excel.
I get a error excel 2010 not detected.
I'm running windows 8.1 pro on an E3 enterprise office licence with excel 2013 64 bit.
There are 3 versions on the download link page and I have tried both of the ones that are marked suitable for excel 2013
Any ideas?

Hello there,
Did you take the following steps to activate the add-ins in Excel?
1. Click the File tab, click Options, and then click the "Add-Ins category.
2. In the Manage box, click Excel Add-ins, and then click Go. The Add-Ins dialog box appears.
3. In the Add-Ins available box, select the check box next to the add-in that you want to activate, and then click OK.
http://office.microsoft.com/en-gb/excel-help/add-or-remove-add-ins-HP010342658.aspx
Keep us posted.

IPage - Casting Issue - Class Not Found

EP6SP14...Encountering a funny issue...
I am successfully compling the following code. All JAR are in place and NWDS is detecting the class and showing the methods properly. LookupObject() is able to find the object.
import com.sap.portal.pcm.page.IPage;
IPage page = (IPage) lookUpObject request,PcmConstants.ASPECT_SEMANTICS,pageUrl);
lookUpObject() returns - com.sap.portal.pcm.page.admin.AttributeSetPage@81e75c
but during Casting, it gives error...
Caused by: java.lang.NoClassDefFoundError: com/sap/portal/pcm/page/IPage
Any ideas what's missing???

Hi Gulshan,
For IPage (and IiView, ILayout, ...) you need the following reference:
<property name="ServicesReference" value="com.sap.portal.ivs.api_iview"/>
Hope this helps.
Daniel

Oracle Certification Page Error - Page Not Found (404)

Hello,
I'm experiencing the following problem: can not access the certification section on oracle site:http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=39
I receive the following error:
Page Not Found (404)
We're sorry! The page you are looking for has been moved or no longer exists.
Please check the current status page first before logging an SR to AITSYS WEB SERVICES group
or Calling the HelpDesk and provide the following information along with steps to reproduce the issue:
Page Not Found Error 404 on Thursday, 23-Oct-2008 01:54:56 PDT amts498.oracle.com (141.146.13.151)
Does anyone have the same problem?

I am sorry, but I am not able to replicate your issue. The page is working fine for me. Perhaps you could contact OU technical support. Are you also having trouble getting to page tihs page http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=3?
You can find OU technical support numbers on this page http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=123. There are also certification email addresses, but they will not be able to assist with technical problems with the website. The Oracle Certification Program Website is a part of the Oracle University website, so this is probably a bigger problem that you are having with the OU site.
Regards,
Brandye Barrington
Certification Forum Moderator
Certification Program Manager

Webcenter Deployment issue - mdsid not found

Similar Messages

Maybe you are looking for