Can't create a working Wireless Network using Airport Extreme Base Station

I don't know what I'm doing wrong...
I've got the cable from the modem going to the base station. I follow ALL on screen instructions. I select "Using DHCP" because when I plug the ethernet cable into my MBP it automatically does everything for me, and has that as its setting as well.
I get to the stage where it asks whether or not I'd like it to share an IP or go into bridge mode, I'm not sure what either of these two mean...I've tried both and both result in no wireless internet.
On several occasions I get to the end, and after I do the "final" update is comes back with one problem - internet connection, saying the router doesn't have a valid IP.
I'm totally lost on what to do here...
If you need more information just ask...please...

The below procedure is described in your AirPort setup manual, but it can be a little confusing. Here is my step-by-step procedure for an AEB setup for the system you describe:
A. Setup the 'Main' Base Station:
1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main).
2. Check ethernet cable connections:
- DSL Modem > AEB (main) WAN port;
- AEB (main) > Mac computer running OS X 10.5.x.
3. Power-on DSL Modem and wait for it to initialise.
4. Power-on the AEB (main) and start your Mac computer.
5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
6. Select 'I don't have a wireless network and I want to create one', click Continue.
7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
8. Select 'I connect to the Internet with a DSL or cable modem using DHCP. Click 'Continue'.
9. Click 'Update' and wait for the AEB (main) to restart.
10. Disconnect the ethernet cable between your Mac and the AEB (main).
B. Setup Client computer
1. Open System Preferences/Network/AirPort.
2. Against 'Network Name:' select your network (the name you gave it at A7).
3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
4. Click 'Apply' and exit System Preferences.

Similar Messages

How can I rename an established wireless network using airport extreme?

How can I rename an established wireless network using airport extreme?

Thanks for the info. On your Mac......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the picture of the AirPort Extreme
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window that appears
Edit/backspace out the Wireless Network Name and type in a new name that you want to use
Click Update at the lower right of the window
Wait a full minute for the AirPort Extreme to restart
Close AirPort Utility
The new network that you named will use the same network password that you set up originally.

Extend an existing non-Apple wireless network using an Extreme base station

I have an existing wireless network via a Belkin modem/router. I would like to add my Airport Extreme base station to this existing wireless network, however this appears difficult. Can anyone help me please?

Hello IanWhite. Welcome to the Apple Discussions!
I have an existing wireless network via a Belkin modem/router. I would like to add my Airport Extreme base station to this existing wireless network, however this appears difficult.
Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your Belkin router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
o Linksys WRT54G or WRT54GS (not v5)
o Belkin F5D7230-4 and F5D7231
o BT Voyager 2091
o Netgear WGR614 v6
o Buffalo WGR-G54
Is your Belkin one of the models in the above list?

Windoze Ad-hoc networks killing Airport Extreme Base Station

After having a horrible experience with an Orinoco base station sometime ago at his coffee shop, a client of mine asked me to install a new Wi-Fi access point to replace it. Since I'd never had a problem with my graphite Airport Base Station, I selected recommended that he try the Airport Extreme. Everything was been fine for over a year and half, with only the occasional interference problem, and even that easily fixed by a restart on the base station. Lately that has changed. We're in Baton Rouge, and since Hurricane Katrina, our population in our city has doubled (that's not an exaggeration), and the number of customers using the network in his coffee shop has increased as well - although it's still well below the maximum. The problem is that there are is large number of students from Loyola, UNO and Tulane who are now attending LSU, right across the street. And a significant fraction of those have ad-hoc networks set up on their Windoze notebooks, apparently unintentionally. When they come into the coffee shop their ad-hoc networks seems to cause the Airport Extreme to die, and not recover, until it is reset. This happens many times per day, sometimes more than once in an hour.
It had been configured to automatically select a channel, but I re-configured to use a specific channel (and have been experimenting with the particular channel). It seems to reduce the problem for a time, but then we'll have the problem back in force within a few days.
I have verified (using iStumbler) that there are no other "managed" networks near-by, and I have noticed that the problem ALWAYS happens when there is are ad-hoc networks, and after politely asking customers if I can check their settings, (it's scary how many people will let you poke around on their computer, if you seem like you know what you're doing) I've also seen compelling evidence that it is Windoze users, not Mac users, who tend to cause the problem. Incidentally at this particular coffee shop the Windoze:Mac ration is something like 60:40. What can I say, it attracts discerning customers. Since some of them have "lsuwireless" set up as an ad-hoc network (and as I said, LSU is across the street), my guess is that somehow these get set up, not on purpose, but accidentally, while trying to connect to the university's wireless network. Apparently the process is not so straight forward for Windoze users as for Mac users.
I have upgraded the Airport Base Station software to the latest available as of last week. Though I don't have that version number available at the moment.
So I have several questions:
1) Is this really the same radio interference problem that I've read about elsewhere on this discussion board?
2) Would an external antenna on the base station help? How about a powered one?
3) Aside from "Use Interference Robustness" and trying different channels, is there some configuration setting that I might be missing that could enhance the base station's reliability?
4) Does anyone have a suggestion for a permanent fix - preferably without switching to a different access point, although at this point, that's a viable alternative. After a year and a half of stable operation though, we're loathe to switch again unless it can't be avoided, because the Orinoco access point we used before had behaved exactly like this, but even worse, and without necessarily having ad-hoc networks being present to cause the problem.
5) Failing any other good solution, can anyone suggest a way to determine which computers are causing the problem without having to interrupt each customer to poke around on his computer?

I have an Intel based iMac and a MacBook Pro. Both
are (well until tonight) connected to the internet
wirelessly through the Airport Extreme Base station.
I've had no trouble up until now. Tonight for some
odd reason the MacBook Pro Airport card fails to
detect the Airport Extreme Base Station. It detects
OTHER wireless networks around the building, just
not the one it's supposed to connect to. Opening up
Airport Utility doesn't even show the Airport
Extreme Base Station being present. I know the Base
Station is not at fault - it works fine with the
iMac. Tried setting the Sharing mode on but that
didn't help either (not that I changed any of the
settings to begin with).
Can anyone help? I'm really at a loss here.
Any one? Any suggestions?

How to disable the wireless section of Airport Extreme Base Station?

Is it possible to disable the wireless section of Airport Extreme Base Station?
It is because I do not want to have any high frequency radio signal which may be dangerous for small baby (no such proof for the moment, however).
Anyone using the new Airport Extreme Base Station please check and help.
Thanks!!

I think you are a little too concerned. Just for the sake of how to, here it is.
go to manual set up, airport, wireless, wireless mode, and then choose off.
good luck.

Can't create a working wireless network (with AEBS N station)

I have a new Airport Extreme Base Station (802.11n), firmware 7.2.1 and a PowerMac G4 running Leopard, with the built-in Ethernet port dead, fried by a storm.
I installed a PCI Gigabit network card which works great. I have a static IP, and no more DSL modem. I am connected directly (via fiber) to my ISP. I purchased the AEBS N to create a wireless network for my iPhone and my laptop(soon to come). But after "successfully" setting up the base station with my IP settings I cannot connect to Internet. I believe that the base station or the actual firmware is not "smart" enough to "look" to anything else but the built-in Ethernet port. It simply tells me that there is nothing connected to the WAN port (even-though I was able to upload all the settings to the AEBS)
AEBS Settings: Create a wireless network,Share an IP address, router mode and Mac connected via DHCP. The wireless network is visible by clients , but they also can't connect to the Internet.
What is wrong? Should I set AEBS in BRIDGE mode? Can someone, please help?
Thank you in advance!

Duane, Thanks for your reply!
I used to be connected via a DSL modem, but now, my ISP removed the modem saying is no longer needed and I am connected only to a wire.(so that means I am part of a LAN I guess) They say is fiber optic up to my block of flats. They have a box on the staircase from where multiple wires goes to apartments! I believe lies a switch in there...!All I know for sure is that I have a static IP and all these numbers I uploaded to the base station! All I have is the amber flashing light and the "nothing connected to the WAN port" msg.
I tried to set the device in bridge mode, but no luck! No Internet!When I connect directly to my mac everything is fine!
They said no problem if I want to put a wirless router in the house!Should I ask them for any specific settings?
Repeat: The Ethernet port I use is from a PCI card. The built in Ethernet is dead! Can this be a reason?
Please let me know if you need other details!

Connect a PC to My existing Wireless Network Using Airport Extreme

this is my issue i bought a Airport Express to connect a PC via ethernet to my wireless network already working at home. Cant figure out the settings???? need help. My home network is using a airport extreme base station. the problem is the PC doesn't have wireless capability so i connected the PC to the airport extreme in order to connect to the network, but no luck so far.

Hello Sailor25. Welcome to the Apple Discussions!
What you need to do is configure the AirPort Express Base Station (AX) as a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

Using AirPort Extreme Base Station as a network AP

I have a Netgear N900 wireless router and and an Airport Extreme Base Station.I used my N900 to create a high speed wirelss network. I would like to use my Extreme Base Station as an access point on this network, in order to get AirPlay and some extra ethernet ports in another part of the house. Is this possible to do, and if so how?
The "extend your current network" option from the Wireless Mode menu does not work. There is no "join your current network" option, like on the Airport Express. What am I missing?
Thank you in advance,
Alex

The Extreme *does not* let you joint an existing network
Yes it does. Please open up AirPort Utility 5.6, select the Extreme and click Manual Setup
Click the Wireless tab below the row of icons
Hold down the option key on your Mac while you click on the Wireless Mode selection box.
What happens? Now you see the "Join" selection.
Problem is, only the USB port is enabled if you configure the Extreme to "join".......as I already stated. The Ethernet ports are not enabled.
The AirPort Express 802.11n has a special feature that allows it to "join a wireless network" and the Ethernet port can be enabled.
The AirPort Extreme does not have this feature.....which might be the reason why Apple hides the "Join" setting for the Extreme.

Printing wirelessly using airport extreme base station

I recently set up a wireless network at my house using an airport extreme base station. I plugged my usb printer into the base station and, according to the manual, I can print wirelessly. However, when I go to print, after following the manual instructions, it just times out. Any ideas?

There is already a thread (or two) on the PSC 1410:
Some people have had success here:
http://discussions.apple.com/thread.jspa?messageID=5987003&#5987003

Using Airport Extreme Base Station As A Wireless Card?

Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station. So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Thank you in advance for any help with this.

Ernest Lohrer wrote:
Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station.
She has an "integrated" modem/router/access point.
So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Set up the AEBSn as a "bridge" and connect the G4 Mini to one of the "wired" internet connections.

Using Airport Extreme base station as wireless Cable router and airtunes.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
I would like this if it is a wireless standalone router as I want to but a pair of wireless airtunes router for music around the house keeping the Airport Extreme in my room where the airtunes routers would not be as I have the computer in my room and I have iTunes right there and would not need the airtunes routers in my computer room.
Leon.

Can I replace my wired Roadrunner cable modem with a Apple Airport Extreme wireless 56g router removing the wired modem out of the picture?
The AirPort Extreme Base Station (AEBS) does NOT have a built-in DSL/Cable modem. You will still require a Cable modem in order to access your ISP's Internet service.
I just have read and have not come to the complete conclusion that the Airport extreme base station is a standalone wireless router.
The AEBS IS a wireless router, but it is NOT a combination wireless router & cable modem.

Networking with AirPort Extreme Base Station

I am connected to the Internet with an SBC dsl modem, which I have had for a couple of years with few problems. However, I have been having issues networking my Mac G5, 1.8 Mhz machine since I purchased it some time ago.
In the beginning (before the Mac or -- BM as I like to call it) I was using a D-Link DI-614+ router and running a desktop PC and a laptop PC wirelessly with success. Then I bought my Mac (which I dearly love) and introduced it into my wireless network. At first it seemed to work OK. Gradually and occassionally it would lock up while trying to access an Internet site. Often the problem was resolved by rebooting the DSL modem, the D-Link router and all the computers. This would give me up to several days with no problems, but then things would rapidly deteriorate and I would have connection problems again.
I thought that if I bought an Airport Extreme base station, that would solve the problems but again, at first things were fine, then rapidly went downhill. I have worked exensively with SBC dsl techs and we have determined that the problem is not with the SBC network or with their dsl modem.
As it stands now I only get a maximum of a couple of hours of time before the slowing down of the network begins. Some of the error messages I get seem to indicate that there is a problem with the distribution of IP addresses. TCP/IP is set to use DHCP, and I connect by setting PPPoE to my SBC connections settings. "Connect using PPPoE" is unchecked. Location is currently "Automatic" although I have used the connection assistant a number of times in an attempt to get the system up and running.
I have the same problems in interconnecting the Mac with the two PCs that are on my system. In fact this is even more erratic than connecting to the Internet.
I have spent many hours with my limited knowledge of these things trying to resolve these issues but have had no success. I have scoured .Mac and other Internet sources and cannot find any specific solution to this problem. I am at a real loss as to where to go next. I am hoping someone here can help or point me in a direction where I might find a solution.
Thanks,
Don
Power Mac G5 Mac OS X (10.4.7)

Thank you very much for your response. Yes, the Mac is set to use PPPoE and the SBC information is stored there.
Just to clean things up, I removed the PPPoE configuration on the Mac and left it unchecked.
Here is other information about how the system is set up.
Note: + means item is checked, - means item is unchecked
Apple Base Station V5.7
WAN Ethernet Port: Automatic (Default)
+Enable SNMP Access
+Enable Remote Configuration
-Enable Default Host at
+Enable Remote Printer Access
-Enable NAT Port Mapping Protocol
Internet:
Connect Using: PPP over Ethernet (PPPoE)
+always stay connected
Network:
+Distribute IP addresses
Airport client computers:
+Share a single IP address (using DHCP and NAT)
((Use 10.0.1.1 addressing))
Power Mac G5 Mac OS X (10.4.7)

Can't get PC laptop to connect to Airport Extreme base station. Help!

I've spent a lot of quality time on the phone with support staff at Apple, Earthlink, and Netgear. Now I turn to you fine folks.
I have an Airport Extreme base station. My G4 is connected to the base station via ethernet, and that works fine. My problem is with the wireless networking with our Dell laptop running Windows XP SP2. Wireless card is a Netgear WG511 with updated firmware. I've configured the network on the PC end using the Netgear Smart Wizard, rather than Windows (I don't know if that makes any difference).
Smart Wizard says the PC is connected to the network, and says that signal strength is excellent. However, there is no connection. I've tried pinging, but get no reply.
The status bar in the Smart Wizard window switches every 2 seconds from "Connected" with excellent signal to "Searching" with virtually no signal. The log shows that it's constantly connecting to and disconnecting from the network.
I've gone over IP and MAC addresses and whatever other settings I could check with all of the respective phone support people. I'm using WPA/WPA2 Personal security, and have double-checked the 13-digit password on both ends. I'm connecting using PPPoE, per Earthlink's settings.
This is maddening! Any suggestions? I'd really appreciate it.
G4 Mac OS X (10.4.10)

See if iFelix's suggestions work for you.
http://www.ifelix.co.uk/tech/1000.html
Remember all the smart wizard stuff is strickley for PC Hadrware and Software and does you no good at all with a Mac.
Don

How can i access my hdd hooked to my airport extreme base station at home, from another place,office,school..?

i have an airport extreme base station ,i conneted a hdd and i want to acces the hdd with my macbook from another place ...office...school....

I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device.

Certain web address not available when using Airport Extreme Base Station

Hello. To access my "secure" account at the local library, I must use a web address that contains a colon followed by a number. I believe that this is a port number, but I confess that all the discussions here regarding ports are going well over my head, and I may be incorrect with this assumption.
My problem is that while I CAN access this site by connecting to my DSL router directly via ethernet cable from my iMac G5, I cannot access the site when connecting to the internet in the mode: iMac Airport to Airport Extreme Base Station to DSL router via ethernet.
The format of the web address is: http://xxxx.yyyy.net:####/zzzzz/, where #### is the number I guess may be specifying a port and causing my problem.
Can anyone advise me, in simple terms, how to get to this address when in the Airport--internet connection mode? Will the solution have any adverse side effects?
Regards and Thanks
iMac G5, 2.5 year old AEBS Mac OS X (10.3.9) Westell 327W 4-port DSL Modem, not using wireless feature.

Very likely the embedded firewall that comes with your AirPort blocks the port you are trying to use.
In order to solve this, best way is to modify the AirPort settings (open the AirPort maintenance app):
Click at the tab "port forwarding" and add the desired port as "public port" to the list. "private IP" is the IP of your Mac and for "private port" type in the port number again.
If you are unsure about the IP of your Mac, look at the network maintenance application.
Well, one side-effect is that you have an open port in your configuration which could cause security issues... but only if you are paranoid So there is nothing to care about (note that without the AirPort inbetween your Mac and your modem, this port would be not blocked and freely accessible

Can't create a working Wireless Network using Airport Extreme Base Station

Similar Messages

Maybe you are looking for