How can i access my hdd hooked to my airport extreme base station at home, from another place,office,school..?

i have an airport extreme base station ,i conneted a hdd and i want to acces the hdd with my macbook from another place ...office...school....

I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device.

Similar Messages

How can I extend a wireless network with my AirPort Extreme Base Station?

Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup. My MacBook Pro could use both bands and established a 300 Mbit/s link very quickly. After tweaking various settings to my liking, I was also able to maximize the connections on many of my non-Apple machines and devices. I noticed that the range of its network was better than my Belkin's, but unfortunately, it failed to completely saturate the area sufficiently. Since the Belkin still works well enough, I was hoping I could bridge them together one way or the other.
The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct? I would like to place them at opposite ends of my home so I can get strong WiFi signals everywhere inside. However, when I try to get the base station to connect to my preexisting WiFi connection, it tells me that I can't extend the network and fails to join.
So is this possible? And if it is, how would I go about setting it up? I know it would probably be easier if I had a simple range booster such as an AirPort Express, but I didn't buy one while I was at Fry's since I hoped I could make use of the older Belkin. This is its product page, if needed. Thanks for any suggestions.
-MacUser

The Belkin router does not support any bridge mode that I know of, but the AirPort Extreme should be able to join a wireless network and then extend that over WiFi and Ethernet, correct?
Sorry, but no. The AirPort Extreme Base Station cannot "join" a network like the AirPort Express or Time Capsule, but you wouldn't want to do this anyway because in this configuration these devices will only perform as wireless clients ... not routers.
Instead, the AirPort Extreme can either be extended or can extend another 802.11g or 802.11n AirPort ... or a very very few non-AirPort devices.
One option for your Belkin would be to connect it to the AirPort Extreme by Ethernet but this may not meet your requirements or be a desirable situation. Otherwise, you would need to get another AirPort to extend your current one.

How do I find a hard drive connected to Airport Extreme Base Station?

*Apple Says:* "If your base station supports it, you can connect a USB hard disk to the USB port on your base station and computers on your network (both wired and wireless) can connect to it to access, share, and store files and data."
Cool. So I followed the instructions. The drive is recognized by the base station and listed in the Airport Utility. It looks like it's ready to go...
So... How do I access the drive? I don't see it on my desktop, it's not under network. I've tried "Connect to server..." and browsing, I can't see the drive, anywhere. Yeah, I've searched the crap out of this issue on google and this message board as well as apple support knowledge base. I'm sure this is a simple issue and I'm just missing the obvious. Help me out.

Hello Timothy Uhl. Welcome to the Apple Discussions!
Try the following to mount the disk...
o Click on the Desktop to enter Finder
o Go > Connect to Server...
o Enter 10.0.1.1 for the server
o Enter Disk Password
o Connect
If this still doesn't solve the problem, let's double-check your disk sharing settings...
AirPort Extreme Base Station (AEBSn) - File Sharing Setup
Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
Disks - File Sharing
o Secure Shared Disks: <With disk password | With base station password | With accounts >
(Note: Choose "With a disk password," or "With base station password" if you want to secure the shared disk with a password, or choose "With accounts" if you want to secure the disk using accounts.
If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk.)
o Guest Access: <Not allowed | Read only | Read and write>
o Share disks over Ethernet WAN port: (unchecked)
(Note: Select the "Share disks over Ethernet WAN port" checkbox if you want to provide remote access to the disk over the WAN port.)
o Advertise disks globally using Bonjour: (unchecked)
o Workgroup: <Windows workgroup name>
o WINS server: <WINS server IP address>

How do I connect my Synology NAS to my AirPort Extreme base station?

I'm considering replacing an Apple AirPort Extreme base station with my current 5 year old router. I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router. I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Thanks for all your help in advance as I am VERY new with networking devices.

I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device.

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Recommended Ethernet NAS HDD to Connect to Airport Extreme Base Station?

My Airport Extreme is about a year old, maybe 14 months old. My DSL modem functions as a bridge to my Airport Extreme. My iMac is plugged via ethernet into the Airport Extreme. In the garage, my MacBook is plugged via ethernet into an Airport Express, which wirelessly extends my network. I have Boot Camp on the MacBook, and the MacBook works well whether I boot Mac OS or Vista. I also have a USB splitter (router? i.e. 5 USB ports) plugged via USB into the Airport Extreme. I have an older, somewhat small USB external HHD plugged via USB into the USB router (or whatever the splitter is called) attached to the Airport Extreme. EVERYTHING IS WORKING. I REPEAT, EVERYTHING IS WORKING.
The USB HDD connected to the Airport is running out of space. I suppose I could just buy a newer, bigger USB HDD and copy the contents of the old USB drive to the new one, leaving the new one connected via USB to the Airport Extreme. However, I am not impressed with the speed of wireless copying from the MacBook in the garage over the wireless network to the USB drive connected to the Airport Extreme in the house. Plus, I have one empty ethernet port on the back of the Airport Extreme. Therefore, I am thinking of connecting an ethernet HDD via ethernet cable to the Airport Extreme. I have no desire to use that ethernet HDD for Time Machine, so the incompatibility there is not a problem. I just want to have a large, fast, ethernet storage drive plugged into the Airport Extreme for general network use. Can anyone recommend a good, fast, reliable ethernet HDD that is "plug and play" when connected via ethernet to Airport Express, i.e. something that will just show up and be visible and work without hassles?
In the simplest terms, I want to replace the USB HDD connected to the Airport Extreme with an ethernet HDD connected to the Airport Extreme and have the ethernet HDD be equally accessible as the USB HDD currently is. I need recommendations for an ethernet HDD that will make it easy.
I have the latest Snow Leopard on both the iMac and the MacBook. (I understand that Vista under Boot Camp on the MacBook will require me to map a network drive, but I figured that out for the USB HDD and would not expect any special problems doing the same thing for an ethernet HDD connected to the Airport Extreme.)

There are any number of things that can cause this, and normally the only fix is to do a complete system reset.
Sometimes you can reset the Modem and it will fix it other times reset the Extreme will fix it, I find the fool proof way is to shut your computer off. Pull the power adapter from your ISP's Modem and from your Airport extreme.
Wait a minimum of 5 minutes and then in order.
Re connect the power adapter to the ISP's Modem and you must wait for it to re-acquire the signal and the lights (Normally 3 depending on the modem they furnished). This normally take a minute.
Next you plug in the power adapter to the Airport Extreme Base and again you must wait about a minute to acquire the signal.
Now you can restart your computers. You should be good.
Don
Remember this has to be done in the sequence mentioned above.

Can Time Machine backup USB Drive connected to Airport Extreme Base Station

I need a new N based wireless router. I would prefer to get just the $179 Base Station and not the $299 Time Capsule. I already have a nice external USB 500GB drive that I would connect to the AEBS. So, once I have this new wireless router/base station installed at home and I have the external USB drive connected to it, can my new Macbook Air with a USB connected 400GB drive be used to backup what is on the Macbook Air and also backup the 500GB USB drive info that is connected to the extreme base station?
Thanks
tj

I found this when searching Apple's web site but it is old, October 2007, and said it could not be done. Has this changed since then?
Here is what I found.
Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
* Last Modified on: October 26, 2007
* Article: 306833
Time Machine in Mac OS X 10.5 Leopard can be used to back up to many kinds of Mac OS Extended-formatted drives, but it does not support AirPort Extreme's AirPort Disk feature.
Time Machine can back up to another Mac running Leopard with Personal File Sharing, or to a Leopard Server volume, or an Xsan storage device.

How can i see the hdd, attached to my airport extreme, on the internet?

I have an Airport Extreme installed with a HDD attached.
I can see the disk and manipulate files when logged in at home.
I want to use it as a storage for current files (and more) which I need every day.
How can I make this visible over the internet and reach it from other places?

In the 5.6 utility you should be able to see everything via the advanced pages.
It will not log the name so you will need to work out from your Mac which user corresponds to which MAC address.

I cannot access my network printer under AEBS(Airport Extreme Base Station)

The current network configuration of me is
1. AEBS have static IP address. (e.g., 154.123.12.54)
2. Network printer in my office have static IP address. (e.g., 154.123.12.55)
3. My iMac is connected to AEBS. And have virtual IP address. (e.g., 10.0.1.201)
The problem is that when I trying to add my network printer on my iMac,
it works. I can find my network printer in the list.
But when I trying to print with that printer, I think any packet is not sent to network printer.
I think AEBS block them.
How can I use my network printer under AEBS?
I didn't have any problem with my Belkin wireless router.

When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

Can't create a working Wireless Network using Airport Extreme Base Station

I don't know what I'm doing wrong...
I've got the cable from the modem going to the base station. I follow ALL on screen instructions. I select "Using DHCP" because when I plug the ethernet cable into my MBP it automatically does everything for me, and has that as its setting as well.
I get to the stage where it asks whether or not I'd like it to share an IP or go into bridge mode, I'm not sure what either of these two mean...I've tried both and both result in no wireless internet.
On several occasions I get to the end, and after I do the "final" update is comes back with one problem - internet connection, saying the router doesn't have a valid IP.
I'm totally lost on what to do here...
If you need more information just ask...please...

The below procedure is described in your AirPort setup manual, but it can be a little confusing. Here is my step-by-step procedure for an AEB setup for the system you describe:
A. Setup the 'Main' Base Station:
1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main).
2. Check ethernet cable connections:
- DSL Modem > AEB (main) WAN port;
- AEB (main) > Mac computer running OS X 10.5.x.
3. Power-on DSL Modem and wait for it to initialise.
4. Power-on the AEB (main) and start your Mac computer.
5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
6. Select 'I don't have a wireless network and I want to create one', click Continue.
7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
8. Select 'I connect to the Internet with a DSL or cable modem using DHCP. Click 'Continue'.
9. Click 'Update' and wait for the AEB (main) to restart.
10. Disconnect the ethernet cable between your Mac and the AEB (main).
B. Setup Client computer
1. Open System Preferences/Network/AirPort.
2. Against 'Network Name:' select your network (the name you gave it at A7).
3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
4. Click 'Apply' and exit System Preferences.

Can't get PC laptop to connect to Airport Extreme base station. Help!

I've spent a lot of quality time on the phone with support staff at Apple, Earthlink, and Netgear. Now I turn to you fine folks.
I have an Airport Extreme base station. My G4 is connected to the base station via ethernet, and that works fine. My problem is with the wireless networking with our Dell laptop running Windows XP SP2. Wireless card is a Netgear WG511 with updated firmware. I've configured the network on the PC end using the Netgear Smart Wizard, rather than Windows (I don't know if that makes any difference).
Smart Wizard says the PC is connected to the network, and says that signal strength is excellent. However, there is no connection. I've tried pinging, but get no reply.
The status bar in the Smart Wizard window switches every 2 seconds from "Connected" with excellent signal to "Searching" with virtually no signal. The log shows that it's constantly connecting to and disconnecting from the network.
I've gone over IP and MAC addresses and whatever other settings I could check with all of the respective phone support people. I'm using WPA/WPA2 Personal security, and have double-checked the 13-digit password on both ends. I'm connecting using PPPoE, per Earthlink's settings.
This is maddening! Any suggestions? I'd really appreciate it.
G4 Mac OS X (10.4.10)

See if iFelix's suggestions work for you.
http://www.ifelix.co.uk/tech/1000.html
Remember all the smart wizard stuff is strickley for PC Hadrware and Software and does you no good at all with a Mac.
Don

Can't connect to a VPN server via Airport Extreme Base Station

My husband is unable to connect to his employer's VPN server through our Airport Extreme when he uses his work PC at home. Strangely, when we had a Dell True Mobile wireless router this was not an issue. He could reach his VPN server via PC, AND our Mac wireless network also worked thru the Dell True Mobile. Is there any way to configure the AEBS to allow VPN connectivity? Do we need to switch to a different brand of wireless router? Please advise.
Mac OS X (10.4.7) Airport admin utilities 4.2

First welcome to the discussions.
To set up the client you'll first have to ask the Network Administrator for the name of the VPN server. The username and other details you will need to log on.
You will also need to find out if the VPN uses PPTP or L2TP over IP Sec. with that information in hand open Internet connect in the Applications folder choose NEW VPN Connection then you click on either PPTP or L2TP whichever the network uses, then click continue in the confiquration pop up menu, Choose Edit confiqurations Then enter the information the Network administrator gave you.
Bear in mind that the OSX client does not work with all VPN's.
You may have to purchase a universal VPN client such as VPN Tracker from Equinux ($90.00).
http://www.equinux.com
Good Luck Don

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Just spoke with Cisco about the router. They said the router is compatible with the E1500. They suggested that I contact Apple to see if their default IP address was that same as the router (192.168.1.1). They told me I would have to change it if that was the case. How would I do that?

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

How can i access my hdd hooked to my airport extreme base station at home, from another place,office,school..?

Similar Messages

Maybe you are looking for