Cannot Edit Duplicate Server Behaviors (bugged?)

Okay, here's a problem:
I've got a user login page with two different forms on it -
one to log in new users, and one to log in existing users. I
applied a "log in user" server behavior to each of them. Now both
of these server behaviors are showing up under the Server Behaviors
menu with the exact same name: "Log In User". When I try to save
this file I get the following error:
The Server Behavior panel cannot determine whether "Log In
User" or "Log In User" is applied to your page. Please select the
Edit Server Behaviors and change one of the two behaviors to ensure
that each is uniquely identifiable.
Clicking on each of them points to the same block of code
(which logs in the existing user). I cannot delete them using the
minus sign. When I click on the plus sign and select "Edit Server
Behaviors" it shows me two other custom behaviors that I'd already
downloaded (and used on another page) but doesn't show me the "Log
In User" behavior at all.
Is there any way to edit these behaviors? Change the name of
one of them? Right now my page is working perfectly and I wouldn't
mind the error except for the fact that this page is based on a
template. Any template changes I make are not updating to this
page. . . perhaps there's a preference I could change that would
allow template changes even if an error is encountered?
Any help is appreciated. Thanks in advance!

Sylvain; thank you for the reply. No, this issue impacts entries other than automount as well.
So far I have observed this with entries consisting of :
1) top/posixaccount/organizationalPerson/person/inetOrgPerson,
2) top/groupofuniquenames/posixgroup
3) top/iphost/nsHost
4) top/nisNetgroup
I have double/triple checked the schema and any log files as well to no avail.
I have opened SR 3-10281206831 related to this issue.

Similar Messages

Cannot edit GPO server 2008

Dear All
I use windows server 2008 in branch have active directory join to Primary domain in data-center domain.co.cc
i need to edit group on the this server but show error
Please help to advise
Run command dcdiag /fix
[QUOTE]Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>dcdiag /fix
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = aaa-CM-DC
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: CHIANGMAI\aaa-CM-DC
Starting test: Connectivity
......................... aaa-CM-DC passed test Connectivity
Doing primary tests
Testing server: CHIANGMAI\aaa-CM-DC
Starting test: Advertising
......................... aaa-CM-DC passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... aaa-CM-DC failed test FrsEvent
Starting test: DFSREvent
......................... aaa-CM-DC passed test DFSREvent
Starting test: SysVolCheck
......................... aaa-CM-DC passed test SysVolCheck
Starting test: KccEvent
......................... aaa-CM-DC passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... aaa-CM-DC passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... aaa-CM-DC passed test MachineAccount
Starting test: NCSecDesc
......................... aaa-CM-DC passed test NCSecDesc
Starting test: NetLogons
......................... aaa-CM-DC passed test NetLogons
Starting test: ObjectsReplicated
......................... aaa-CM-DC passed test ObjectsReplicated
Starting test: Replications
......................... aaa-CM-DC passed test Replications
Starting test: RidManager
......................... aaa-CM-DC passed test RidManager
Starting test: Services
......................... aaa-CM-DC passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:05:09
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:10:10
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
A warning event occurred. EventID: 0x00000427
Time Generated: 11/19/2014 11:14:30
Event String:
There are no IP addresses available for lease in the scope or supers
cope "DHCP-CM".
A warning event occurred. EventID: 0x000003FC
Time Generated: 11/19/2014 11:14:48
Event String:
Scope, 192.168.10.0, is 100 percent full with only 0 IP addresses re
maining.
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:15:10
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:20:11
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:25:11
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:30:12
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0xC00A0038
Time Generated: 11/19/2014 11:32:53
Event String:
The Terminal Server security layer detected an error in the protocol
stream and has disconnected the client. Client IP: 192.168.0.212.
A warning event occurred. EventID: 0x000003FC
Time Generated: 11/19/2014 11:34:49
Event String:
Scope, 192.168.10.0, is 100 percent full with only 0 IP addresses re
maining.
A warning event occurred. EventID: 0x000003FC
Time Generated: 11/19/2014 11:34:49
Event String:
Scope, 192.168.10.0, is 100 percent full with only 0 IP addresses re
maining.
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:35:13
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:40:13
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:45:14
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:19
Event String:
Driver RICOH Aficio MP C4502 PCL 5c required for printer RICOH Afici
o MP C4502 PCL 5c is unknown. Contact the administrator to install the driver be
fore you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:22
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Se
nd To OneNote 2010 is unknown. Contact the administrator to install the driver b
efore you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:23
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microso
ft XPS Document Writer is unknown. Contact the administrator to install the driv
er before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:23
Event String:
Driver SnagIt 8 Printer required for printer SnagIt 8 is unknown. Co
ntact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:45:24
Event String:
Driver WebEx Document Loader required for printer WebEx Document Loa
der is unknown. Contact the administrator to install the driver before you log i
n again.
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:50:17
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 11:55:17
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:36
Event String:
Driver RICOH Aficio MP C4502 PCL 5c required for printer RICOH Afici
o MP C4502 PCL 5c is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:39
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microso
ft XPS Document Writer is unknown. Contact the administrator to install the driv
er before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:40
Event String:
Driver WebEx Document Loader required for printer WebEx Document Loa
der is unknown. Contact the administrator to install the driver before you log i
n again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:41
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Se
nd To OneNote 2010 is unknown. Contact the administrator to install the driver b
efore you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 11/19/2014 11:58:42
Event String:
Driver SnagIt 8 Printer required for printer SnagIt 8 is unknown. Co
ntact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000422
Time Generated: 11/19/2014 12:00:18
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\domain.co.cc\SysVol\domain.co.cc\Policies\{B6AEC 142-9EBB-417C-8080-A6E4713790D
9}\gpt.ini from a domain controller and was not successful. Group Policy setting
s may not be applied until this event is resolved. This issue may be transient a
nd could be caused by one or more of the following:
......................... aaa-CM-DC failed test SystemLog
Starting test: VerifyReferences
......................... aaa-CM-DC passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : aaa
Starting test: CheckSDRefDom
......................... aaa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... aaa passed test CrossRefValidation
Running enterprise tests on : domain.co.cc
Starting test: LocatorCheck
......................... domain.co.cc passed test LocatorCheck
Starting test: Intersite
......................... domain.co.cc passed test Intersite

I do follow with step below as link http://support.microsoft.com/kb/290762, It's work fine
Note You can configure the FRS logs to record detailed debugging entries. For more information about how to configure FRS logging, click the following article number to view the article in the Microsoft Knowledge Base:
221111 Description of FRS entries in the registry
To perform a nonauthoritative restore, stop the FRS service, configure the
BurFlags
registry key, and then restart the FRS service. To do so:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
Locate the following subkey in the registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Backup/Restore\Process at Startup
In the right pane, double-click BurFlags.
In the Edit DWORD Value dialog box, type D2 and then click
OK.
Quit Registry Editor, and then switch to the Command box.
In the Command box, type net start ntfrs.
Quit the Command box.
When the FRS service restarts, the following actions occur:
The value for BurFlags registry key returns to 0.
Files in the reinitialized FRS folders are moved to a <var>Pre-existing</var> folder.
An event 13565 is logged to signal that a nonauthoritative restore is started.
The FRS database is rebuilt.
The member performs an initial join of the replica set from an upstream partner or from the computer that is specified in the Replica Set Parent registry key if a parent has been specified for SYSVOL replica sets.
The reinitialized computer runs a full replication of the affected replica sets when the relevant replication schedule begins.
When the process is complete, an event 13516 is logged to signal that FRS is operational. If the event is not logged, there is a problem with the FRS configuration.

Is there any way to add dynamic parameter in sql without breaking Server Behavior

Hello, i'm building multiple language site.. i would like to know if there is possible way to add dynamic parameter in my query, without break the server behavior.
For example:
mysql_select_db($database_dxc_conn, $dxc_conn);
$query_Recordset1 = "SELECT article.articleName, article.articleDesc FROM article";
$Recordset1 = mysql_query($query_Recordset1, $dxc_conn) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
will become something like this:
$additionalSQL=", article.articleName_en";
mysql_select_db($database_dxc_conn, $dxc_conn);
$query_Recordset1 = "SELECT article.articleName, article.articleDesc $additionalSQL FROM article";
$Recordset1 = mysql_query($query_Recordset1, $dxc_conn) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
this is just an example, my real scenarion is far more complicated than this... however this kind of approach break the server behavior and force to do hand-coding...
i would like to know if there's better way to do such thing like this...

viktor.iwan wrote:
Hello, i'm building multiple language site.. i would like to know if there is possible way to add dynamic parameter in my query, without break the server behavior.
Server behaviors are simply bits of boilerplate code automatically generated by Dreamweaver. Editing the code doesn't "break" it (unless your edits are badly written). However, once you edit the code, Dreamweaver no longer recognizes it, so you lose the ability to drag recordset results from the Bindings panel.
If you want to edit server behavior code, the best way to handle it is to lay out your page as you want, using the Bindings panel. Once everything has been done, only then edit the server behavior code.

CS6 Dreamweaver using PHP & MySQL - Delete Record Server Behavior?

When I try to insert the Delete Record server behavior. I get an error message about a DeleteRecord.js file, which seems to be missing or defective. I cannot use the server behavior. I have a file that I developed using CS5, and it does indeed delete the record, but does not proceed to the destination I want. I cannot change that except in the server behavior, so I'm stuck. I have noticed that server behaviors seem to disappear without apparent cause, as it seems to have in this case. I will appreciate any suggestions! Is there any way to embed a call to a target page manually? All is working WITHOUT the server behavior appearing, but I want to go to a confirmation display page that shows the record is indeed deleted, and we just return to the (now blank) delete confirmation page. That'll drive a user bonkers!
Thanks!
Delete Record in CS6 Dreamweaver using PHP & MySQL?

Well, your error message is self-explanatory.
DW stores ServerBehaviors in 'Configuration' folder in installation directory. If one of the behavior JS files is missing/ corrupt, you'll see the error message you just did.
I've uploaded a functional, proper version of DeleteRecord.js onto my site for you to download. Here's the link:
http://www.sudarshan.me/adobeforum/dw/app/behavior-js/DeleteRecord.zip
Download this file, extract it and put DeleteRecord.js file in your installation directory as follows. If prompted, 'replace' your local copy:
Mac: Applications > Adobe Dreamweaver CS6 > Configuration > ServerBehaviors > PHP_MySQL
Windows: C:\Users\Your User Name\AppData\Roaming\Adobe\Dreamweaver CS6\[language]\Configuration\ServerBehaviors\PHP_MySQL
It should work as expected.
If that still doesn't solve the problem, reset your DW preferences and cache and try doing it. Follow the instructions here to reset cache: http://forums.adobe.com/thread/494811
Let us know how it goes.
-ST

I cannot edit project in project server after editing it in project professional

Hi
i cannot edit project in project server 2013 after editing it in project professional.
i.e I created an enterprise project in project server and then edit it with project professional. after i published it to the server and open it with project server, it shows the changes. but when i click on a cell, suddenly the task list and gantt table
hidden!!
it happens even if I start a project with project professional.
I'm the admin user.
what's the problem?
Thanks.

CU means cumulative updates, which are intermediate bug fix packages between SP. The latest CU for Project 2013 was release on September 12th. See reference
here.
Can you try to reproduce the bug with
IE in compatibility mode?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Dreamwever CS5 ERROR server behavior panel cannot determine wheter "command" or "recordset (Query)"

i get this error whenever i open pages created in CS4. ive tried deleting the cache file... deleting the entire configuration folder and letting DW re build it.. nothing... error still there. how can i turn it off? i also cant seem to find the "edit server behaviors" button.. double click? well DW freaks out with that aswell... yes i know i have some insanely hand edited code.. basically use DW as notepad replacement.. with extra features like having the option of "add recordset" then going and editing it to my liking.
the error
[quote]
The server behavior panel cannot determine whether "command" or "recordset (Query)" is applied to your page. Please select edit Server Behaviors and change one of the two behaviors to ensure that each is uniquely identifiable.
[/quote]
this is a total show stopper for me.. im going to have to go back to a previous version cant click "ok" every time i open a page.. and every time i follow a include file.
development ASP
Dreamweaver CS5
Question.. how to disable the error message from popping up? i'll take my chances with hand editing the recordset / command by hand if i need it changed.

this is bleh... having to resort back to CS4..
is there any way to legaly go back to cs4 dreamweaver but still use the other cs5 applications?

The Server Behavior panel cannot determine whether "Command" or "Recordset (Query)" ...

Suddenly getting this goofball message in DW5.5 on Win7:
"The Server Behavior panel cannot determine whether "Command" or "Recordset (Query)" is applied to your page. Please select Edit Server Behaviors and change one of the two behaviors to ensure that each is uniquely identifiable."
Crazy thing is, it only happens on my workstation.
DW5.5 on my laptop opens the same .asp pages without this crazy message popping up.
Anybody know what the issue is?

I'd suggest that no answer means no answer yet. The person who can help may not have been on the forum the day the post was made.
That said, I'm starting to suspect that the cause must be an extension. Both boxes have the same version of DW and the same OS but both don't have the exact same extensions installed. Will play around and see what happens.

*** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAss

*** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAssignedMachine
CCCRT::RunSQLStoredProc - Failed to execute SQL cmd exec [sp_CP_CheckNewAssignedMachine] N'xxx', 1
CCRQueueRequest::GetRequestFromQueue - Failed to execute SQL cmd sp_CP_CheckNewAssignedMachine
I get the above issue and the one below at a client site; the error started with the error below then changed to the one reported above and back to the one below. Everything is working as it should but the issues
started when one of the admins at the data-centre incorrectly applied a gpo which affected a number of service accounts (sccm inclusive) and they expired....hence reporting in sccm got broke as well as this error in the ccm.log file appeared.
Remote client install still works but I believe this error affects new client discovered by sccm, so in other words devices discovered by sccm do not get the client installed automatically....but if all access and permissions are in place...pushing out the
client to the new discovered system works, it just not done automatically, which kinda defeats one the reasons for using sccm.
I have searched the breadth of the tinternet and I can only find two technet reference to the same error - one says to edit the stored procedure on the sql server which I don't think should be done... Like Jason said and I concur....its bad joo joos.
The second suggestion, said you should select all the options in the Client Push Installation properties, I have tried this but hasn't solved the problem.
I am planning to upgrade the site to the R2 CU3 before the end of the year but I would like to resolve this error before the upgrade.
The site is currently sccm 2012 sp1
Any idea?> Resolution? sil vous plait!
Merci

Hi ,
Please back up the database of the SCCM site. Then run the following query against the Site DB and see how it goes.
DELETE FROM System_SMS_Resident_ARR
WHERE ItemKey IN (
SELECT ItemKey FROM vSystem_SMS_Resident_ARR
GROUP BY ItemKey
HAVING COUNT(ItemKey) > 1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

[SQL Server]Violation of PRIMARY KEY constraint 'DeploymentSummary_PK'. Cannot insert duplicate key in object 'dbo.DeploymentSummary'. The duplicate key value is

I have migrated my SCCm 2007 environment to SCCM 2012 SP1 CU4.
I noticed in the System Status\Component Status\SMS_STATE_SYSTEM a lot of errors like the one below:
Microsoft SQL Server reported SQL message 2627, severity 14: [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of PRIMARY KEY constraint 'DeploymentSummary_PK'. Cannot insert duplicate key in object 'dbo.DeploymentSummary'. The duplicate key value is (1, 0, S0220438, 0). : spUpdateClassi
Please refer to your Configuration Manager documentation, SQL Server documentation, or the Microsoft Knowledge Base for further troubleshooting information.
When looking up the deployment ID and recreate the Deployment the problem is solved. But I have 700 packages and don't want to manually do this action on all packages. I think it is related to the migration i did and something went wrong there :-(
Besides it will retriggers the deployment to the clients which is also not preferred.
Is there another way to solve this by e.e.g do something directly in the SQL database tables ?

Hi,
It is not supported by Microsoft that do something directly in SQL database.
If you want to do that, you could make a call to CSS.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot edit outgoing SMTP server list in mail.app

Did a fresh install of Snow Leopard on a new 13" Macbook Pro unibody and was trying to add an IMAP email account. After failing to connect, I was trying to specify the outgoing port and realized that I could not edit the outgoing SMTP server list.
Steps to reproduce error:
1. Open mail.app
2. Go to Mail > Preferences
3. Select "Accounts" tab and select any mail account
4. Select "Account Information" tab and click Outgoing Mail Server (SMTP) drop down menu
5. Select "Edit SMTP Server List..."
After that point the instead of opening the list of servers with their settings, it simply returns to the "Account Information" screen. I'm a bit confused because I've never had this happen before in any other version of mail app. I cannot edit or delete any outgoing mail server accounts because of this. Any help will be much appreciated. Thank you for your time and consideration.

This should not happen. Had you migrated back to the fresh install the Mail folder in User-Library? Or is this a clean setup? I would go to User-Library-Preferences, and drag the com.apple.mail.plist to the trash, then open Mail and try again.

ERROR: cannot edit or duplicate page. Reason: no editable regions

Hi,
Going round in circles with this one. Feeling like Friday afternoon.
URL: http://www.business-risc.com/fleet/bss/1/index.html
CtrlE works fine.
Click on "POLICIES" spry tab
Click on EDIT PAGE
Highlights the correct editable region... hover confirms its an editable region.
Allows me to edit, no problem.
Then, on SAVE DRAFT or DONE returns ERROR: cannot edit or duplicate page. Reason: page does not contain any editable regions.
I just cant see why. Can anyone help please?
Thanks
Carol

There should be a space before the ice:editable attributes (all of them):
class="TabbedPanelsContent"ice:editable="*"
Regards,
Dan Popa

CS3 Bug with Server Behavior Command?

Hi there,
by updating a "Command" with the Server Behavior window
(windows XP) the upcoming window does not read all the Defaulkt
Values and Run Time Values anymore (do not know if ever did).
Here is an
Example .
anybody saw the same problem? Or anybody knows a solution?
thx
Sebastian

But if you have any pull, you should pass the note along to the Dreamweaver team and have them fix the bugs.
It's not a question of "pull". Adobe (or any other software company) decides what to fix, improve, or drop on a cost/benefit basis. Fixing an ASP feature might be relatively simple, but doing so means that something else gets ignored. The ASP feature might be very crucial to you, but if Adobe considers it a low priority in terms of affecting overall sales, it's unlikely to get fixed. Whether that's the right business decision is not for me to say.
I have submitted a large number of bug reports and feature requests over the years. Some are acted upon, others aren't. So far, I have accepted that the new features are, on balance, worth more than the features that haven't been fixed or implemented. Each user has to make the same decision. If people stop buying Dreamweaver because they think Adobe has made the wrong choices, either Dreamweaver will decline or Adobe will change its policies.
I have seen new tools, such as Zend Studio, offered by other companies that do PHP things far better than Dreamweaver. I use Zend Studio, and like it a lot; but as an overall web development tool, Dreamweaver still beats it hands down. But neither Dreamweaver nor Adobe can rest on their laurels. That's why I encourage people to make use of the feature request/bug report form at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform to tell Adobe what's important to them. There's no guarantee that your ideas will be adopted, but it's the only sure way to get ideas directly to the people who have the power to implement them.

TS4002 I cannot edit my incoming mail server name under iCloud

This morning my iCloud email stopped working. When I open the Mail preferences panel and look at the iCloud account, the Incoming Mail Server is listed as "mail.example.com" and is greyed out. I cannot edit this entry to the proper iCloud server name. I can edit my user name and password, but when I try to save changes it tells me that I cannot leave the Incoming Mail Server name blank. Which wouldn't be a problem if I could, you know, change it.
This just started this morning. I noticed that Mail was asking me for passwords that have been in my Keychain for ages, and I had to manually enter them all to get to my email.
My account is working on my iOS devices.
Tom

Looked around on other threads on Apple Support and found a solution that worked for me.
    - Delete your iCloud account in Mail Preferences, Account tab.
     - Click "+" to add an account
     - Fill in your iCloud name-address-password, then hold Option key down, then click 'Continue'. Holding Option down takes you to a screen you normally don't see!
     - Change the incoming Mail Server from 'mail.me.com' to 'imap.mail.me.com'
     - Proceed creating your account.
Try!

Cannot edit the smtp server list in Mail (Yosemite)

I am trying to edit the smtp server list in Mail. I am running Yosemite on my MacBook Pro and always get this message.
"The servers marked with alert icons are in conflict and cannot be saved. Two servers cannot share the same address and authentication settings. Resolve the conflicts and try again."
There are no alert icons displayed!!! And I can not delete a server.
I need to change some smtp-settings and cannot edit anything.
Any ideas?

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData/Accounts.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Desktop, leaving the window open. Relaunch the application and try to recreate the account settings. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the item you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Cannot Edit Duplicate Server Behaviors (bugged?)

Similar Messages

Maybe you are looking for