Cannot provide connect data for database target system CONFIG_DB
Hello,
I'm trying to install SP22 in NW04 but I'm getting an error on step 11 Deploy JDDI
Cannot provide connect data for database target system "CONFIG_DB".
Cannot connect to database: Cannot create class loaders for DB target system CONFIG_DB.
ERROR 2008-10-01 17:51:09
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-10-01 17:51:09 [iaxxinscbk.cpp:289]
abortInstallation
MUT-02041 SDM call of deploySdaList ends with returncode 4. See output of logfile C:\Program Files\sapinst_instdir\PATCH\MSS\callSdmViaSapinst.log.
callSdmViaSapinst.log:
com.sap.sdm.apiint.serverext.servertype.TargetServiceException: Cannot provide connect data for database target system "CONFIG_DB".
Additional error message is:
com.sap.sdm.serverext.servertype.dbsc.DatabaseConnectException: Cannot connect to database: Cannot create class loaders for DB target system CONFIG_DB.
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader for component com.sap.sdm.serverext.servertype.dbsc.SERVEREXT_DBSC_EXTERN(CONFIG_DB): Referenced loader #0 for component com.sap.sdm.serverext.servertype.dbsc.JDBC_DRIVER(D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\base.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\util.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\spy.jar) is not available.
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader for component com.sap.sdm.serverext.servertype.dbsc.JDBC_DRIVER(D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\base.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\util.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\spy.jar).
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader instance: Jar file #1 cannot be read: D:\usr\sap\WDA\DVEBMGS00\j2ee\jdbc\base.jar
Oct 1, 2008 5:51:08 PM Info: Summarizing the deployment results:
Oct 1, 2008 5:51:08 PM Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\SYNCLOG.SDA
Oct 1, 2008 5:51:08 PM Error: Aborted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\J2EE_JDDSCHEMA.SDA
Oct 1, 2008 5:51:08 PM Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\COM.SAP.SECURITY.DBSCHEMA.SDA
Oct 1, 2008 5:51:08 PM Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\XML_DAS_SCHEMA.SDA
Oct 1, 2008 5:51:08 PM Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\JMS_JDDSCHEMA.SDA
Oct 1, 2008 5:51:08 PM Error: Processing error. Return code: 4
the spy.jar was there but some how it got deleted.
Any ideas?
Thanks
For others who may be facing the same problem and would like to have a permanent fix, you can download the largest JDBC drivers from http://service.sap.com/msplatforms and refer to note 639702 and if your system is NW7.0 with EHP1 or SR3, you should also refer to note 1109274.
Similar Messages
-
Error: 1013020 Cannot clear data for database [Daily] while other users are
I'm trying to clear a (BSO, v 11.1.2.1) database, and it's failing with the following message:
Error: 1013020 Cannot clear data for database [Daily] while other users are connected.
There are no other users connected first of all. Second of all, I've never had a database fail to clear just because other users were connected. Has anyone seen this before?
SabrinaWHen ever u start essbase application ..there is services starts in task manager called "ESSSvr" . The number get increased when keep opening as number of application you open ..So what i say is when u see no users in sesssion and no batch runs ahead , u can stop the Application in EAS and automatically it will log off all the users from that respective application ..And then start again the application and u can perform ur task
this usually happnes when some one is connected with excel addin or Same EAS open by another user remotely..thats what i have seen in my exp's -
Single hierarchy for multiple target systems
Hi,
I have a version named "Account" with a hierarchy named as "Acc2013".
the hierarchy "Acc2013" is same across Oracle EBS, Oracle Fusion GL, and HFM.
how can i assign multiple node types to the same hierarchy so that i just need to maintain one hierarchy (this case account hierarchy) and select the properties pertaining to each target system?
i.e. i select the Oracle GL from the drop down and give the details for the Oracle GL then i select the HFM category from the drop down and provide the HFM related properties.
the reason why i am asking is, if i dont give the node type, all the unnecessary properties are showing up for other type of hierarchies. for e.g. there is another hierarhcy named cost center there its showing the account related properties.
to summarize, how i can utilize a single hierarchy to be used for different target systems? Appreciate your help. do i need to create different version and hierarchy for different types of target systems?I'm late to respond to this, but I always preach to customers that it is critical for DRM to act as an enterprise view. This isn't a "System A" hierarchy, or a "System B" hierarchy, but rather it's an asset that is shared by both systems, and therefore attributes for both systems are valid. Since node types provide the ability to hide properties, many interesting options present themselves, not all of which lead to a good outcome in the longer term. If a user doesn't ever want to see properties for a particular system, it would be better to just remove their access to that property category in many cases. (They may already have read only access but they object to "being bothered" with seeing those properties.)
I've seen many DRM implementations head down the other path and end up with duplicate maintenance requirements, configuration challenges, or even having to do major reengineering efforts to transition DRM from a Finance department tool into an enterprise use case feeding a data warehouse. A current customer of mine used a scheme where a checkbox on each property category would make the properties disappear if unchecked...this worked great with a handful of node types, but unfortunately the number of node types needed to support all of these property category combinations was bound by factorial math principles. Consequently the maintenance for this solution went from unweildy to unmanageable as more "non-HFM" data was added to DRM.
DRM implementations should be guided by governance principles and maintenance business rules, rather than than how things appear in DRM. It's how they appear when published that is of primary importance. I think the new features related to Data Governance will help greatly in this regard. Users that are overwhelmed by the DRM UI can easily be limited to the attributes that are relevant to their specific workflows, and only the "Power users" will see everything. -
Maintain outgoing EDI-connection data for partner
Dear All,
While creating the output type for a purchase order & selecting the medium EDI system flashes the error message whiah is as below.,
Maintain outgoing EDI-connection data for partner
Kindly help for the same.
RahulHi
You need to maintain this partner field (Partner who receives the output-SystemidCLNT eg..D4JCLNT100) in the create PO output screen. and please maintain the message type in the transaction WE20 for your BP or LS and define the message type for your PO in SPRO.This should solve the problem
Regards
Vinod
Edited by: Vinod Kumar Pedapati on Feb 24, 2009 8:44 AM
Edited by: Vinod Kumar Pedapati on Mar 2, 2009 11:26 AM -
PO Change O/P error- Maintain outgoing EDI-connection data for partner for
Hi Experts ,
We are connecting our SAP ECC 6 ( Ehp 4) sytem to 3rd party system via SAP PI. We already done all the settings..line Output detemination procedure, Partner Profile ( WE20) , Port creation , Condition Records..etc.
We have PO Creation ( ZCRE) and PO Change ( ZPOC) Outbound messages to go from our system. Both have sepate message Types, since PO Creation IDOc should go immidiatly ( Dispatch time 4-Send immediately (when saving the application)
and PO Change IDoC should send as per wish manully in ME9F ( Dispatch time -3 Send with application own transaction).
Once PO Created , Output Message successfully triggering and IDoC is creating ( Green Color) ..so it is working fine .
Fo PO Change Message we had selcted Program -FM06AEND & FORM routine -CHANGE_FLAG.
We also set "Multiple issuing " checkbox in the Output Type and no requierment is assigned.
In WE 20, for Logical system ( LS) Partner XYZ, we set Process code ME11 and checked "Change Message"
1. But when I change PO Qty , output is not automaticaly triggering .After changing PO, if we see determination Analysis, in Procedure RMBEF1, this output ZPOC shows 2 times. First, it shows green color,...Output Found , and second times, it displays, "partner XYZ is not an EDI partner"
2. If we try to manually enter the Output ZPOC in PO Header, then system gives the Error - Maintain outgoing EDI-connection data for partner XYZ.
Can anyone pls suggest what should be the reason for above?
Thanks
NAPIssue Resolved .
The reason for this system behaviour is in fine-tuned control: We was
using ZMIN only for new message output and ZCHG only for change messagesNevertheless, you can maintain two entries in WE20 for ORDCHG:
EF ZCHG ME11 w/o Change message flag
EF ZCHG ME11 with Change message flag
Thanks -
IDOC Error - Maintain outgoing EDI-connection data for partner
Hi
I am trying to send customer invoice to an external system thru IDOC, type INVOIC02. I have done the basic setting for the output type ZEDI to transfer the doc thru edi. But when i got to the output types of the doc and give the type ZEDI and the partner, i get the msg "Maintain outgoing EDI for partner".
I have created a partner profile for customer (KU) for the same partner number in WE20 and have given the outbound parameters with the message type INVOIC.
These are the settigns for my partner profile:
part type: KU
msg type: INVOIC
Outbound Options: Receiver port: A000000050 (tRFC)
Packet size: 1
Transfer IDOC immeediately
basic type: INVOIC02
Message Control: Application: V3
Msg type: ZEDI
Process Code: SD09
Following are the steps that I did in VF01
menu GOTO>> Header>> output
I have only RD00 there
I manual add ZEDI there hit return, i get the medium, partner function and partner populated to EDI, SH and the partner number.
i get the msg: Maintain outgoing EDI-connection data for partner 300203.
What other setting should i do to get it working?
Regards
Sujai.Hello Sujai
In our case we never send any invoice directly to the customer (Ship-to-party) yet to the payer (partner role = 'PY') defined for this customer (check partners in XD03 for Ship-to-party).
The output sent from the invoice is in our case:
- output = 'ZRD0'
- medium = '6' (EDI')
- function = 'PY' (payer)
- partner = <partner number of payer>
The partner profile (WE20) looks like this:
- partner no = <partner number of payer>
- partner type = 'KU' (customer)
- partner role = 'PY' (payer)
Regards
Uwe -
Linking from Hand Built Report to a Metric Collection for a Target System
I have some hand-authored reports that I would like to link into metrics details for the target system I've created the report for.
This would eliminate some heavy redundancy of data that I've put into the reports.
How does one create this type of link? There seems to be two primary interfaces, one where I point at a report, a second where I construct a URL and put it in the table (most likely hidden). This latter, I think, is what I want. And as I'm going into the metric details for a specific metric, can I consider the URL a "contracted" interface that won't break? For example:
/em/console/metrics/metricData?type=sun_storage_7000&target=isv-7110h&metric=LogicalInformation
I can assemble the above URL from mgmt@metric_current target_name and target_type and then hardcode the metric I want to go to and I will be good for all of eternity (at least 10.2.0.2 to 10.2.0.5)?
PaulThis technique works swimmingly and appears to be supported throughout the framework!
-
Maintain outgoing EDI-connection data for partner 199093 during ORDRSP
Hi Experts,
We are trying to send the "Order Confirmation" using "ORDRSP" IDOC message type. So we created the new Output type as ZBA0 (Copy of BA00) and assigned with the sales output pricing procedure.
Then we maintained the "partner profile" in WE20 in the "Outbound" parameter. Then we tried to send the Order confirmation in the sales order. During that time, we are getting the error as "Maintain outgoing EDI-connection data for partner 199093".
After maintaining the relevant configuration and partner profile maintenance also we are getting the above mentioned error message. Kindly give your valuable comments on this issue, which will help us to speed up the process.
Warm Regards,
NagHi Nag,
The message '"Maintain outgoing EDI-connection data for partner 199093" comes if the partner profile settings are not maintained properly.
Please check wehther the customer 199093 is maintained under the partner type KU. If it is maintained, please check whether the message type 'ORDRSP' is configured in the outbound parameters for the customer 199093.
If the above settings are done properly, please check whether the output type ZBAO is configured based on the partner type of the customer 199093.
Hope this solves your problem.
Regards,
Vijaymadhur. -
Management Portal unavailable - "cannot load management data for this resource type"
Noticing that with the exception of virtual machines, every resource type in the (non preview) Azure Management Portal is showing a sad pink icon and the help text "cannot load management data for this resource type."
So that's a near total portal outage for us. Anybody else experiencing this?
I've attempted to open a ticket with developer support but I'm not sure if that's the right channel.
BrianHi Brian,
Thanks for your posting!
From Dashboard shown (http://azure.microsoft.com/en-us/status/#history), Currently, the Azure portal works fine in every regions.
So I suggest you can submit a tick via this channel:
http://www.windowsazure.com/en-us/support/contact/
Also, you can click your right-top account name and select the "Microsoft Support" item to create free ticket.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Maintain Outgoing EDI Connection Data for Parter
We need to send Debit and Credit Memo to customers via EDI?
How to maintain Outgoing EDI connection data for parter?
and
How to see the outgoing EDI connection data for partner which is maintained already?
and
How to maintain EDI partner agreement?You can maintain EDI partner data thru transaction WE20.
Thanks,
Manish -
Old email is closed. I have no access to it. Cannot change email address for icloud in system preferences,does anyone have a way this can be corrected? I don't have access to icloud.
Hi Joycars,
Can you not simply sign out of the iCloud account with the incorrect email? Not sure I'm following?
GB -
How do I update/change the connect descriptor for a target RAC database in Cloud Control
I have Cloud Control 12c Release 3 set up and monitoring many hosts and targets. However when monitoring my RAC (2 nodes), it cannot connect to the database instances (although it shows them as up). I get the message "IO Error: The Network Adapter could not establish the connection". I can see that the connect descriptior is using the vip, rather than the hostname.
How can I update the connect descriptor within Cloud Control to the correct values?Modify the monitoring configuration following the below listed note
How to Modify/Update Monitoring Configuration of a Target Database or Listener in 12C Cloud Control (Doc ID 1385769.1) -
Cannot launch/connect to my database since i updated windows from 8 to 8.1
Hello,
Firstly, don't be surprised, i don't speak english very well. Yesterday, everything worked. However, since i updated windows 8 to the 8.1 version, it doesn't work anymore. When i launch sqlplus and i try to access to my database, i get the error below:
D:\>sqlplus
SQL*Plus: Release 12.1.0.1.0 Production on Ven. DÚc. 13 11:20:24 2013
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Entrez le nom utilisateur : SYSTEM@VINOUDB
Entrez le mot de passe :
ERROR:
ORA-12154: TNS : l'identificateur de connexion indiquÚ n'a pas pu Ûtre rÚsolu
When i look at the listener status, i get :
D:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 12.1.0.1.0 - Production on 13-D╔C. -2013 11:
26:17
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connexion Ó (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(KEY=EXTPROC1521)))
TNS-01103: Le composant spÚcifique au protocole de l'adresse est incorrect
TNS-12533: TNS : paramÞtres ADDRESS illÚgaux
TNS-12560: TNS : erreur d'adaptateur de protocole
TNS-00503: ParamÞtres ADDRESS illÚgaux
Connexion Ó (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
TNS-12541: TNS : aucun processus d'Úcoute
TNS-12560: TNS : erreur d'adaptateur de protocole
TNS-00511: Pas de processus d'Úcoute
64-bit Windows Error: 61: Unknown error
Now, i am going to put each configuration file:
TNSNAMES.ORA
# tnsnames.ora Network Configuration File: D:\app\vincent\product\12.1.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
BDVINOU =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = BDVINOU)
LISTENER_BDVINOU =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
LISTENER.ORA
# listener.ora Network Configuration File: D:\app\vincent\product\12.1.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\vincent\product\12.1.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\vincent\product\12.1.0\dbhome_1\bin\oraClr12.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SQLNET.ORA
# sqlnet.ora Network Configuration File: D:\app\vincent\product\12.1.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Thank you for your help
cordially,
VincentI tried what you said. Here are the results:
lsnrctl services BDVINOU
D:\>lsnrctl services BDVINOU
LSNRCTL for 64-bit Windows: Version 12.1.0.1.0 - Production on 13-D╔C. -2013 13:
49:46
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connexion Ó (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(CON
NECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BDVINOU)))
RÚcapitulatif services...
Le service "CLRExtProc" comporte 1 instance(s).
L'instance "CLRExtProc", statut UNKNOWN, comporte 1 gestionnaire(s) pour ce se
rvice...
Gestionnaire(s) :
"DEDICATED" Útabli : 0 refusÚ : 0
LOCAL SERVER
La commande a rÚussi
The result in the listener.log file after the previous command execution :
13-DÉC. -2013 13:56:49 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=vincent))(COMMAND=services)(ARGUMENTS=64)(SERVICE=BDVINOU)(VERSION=202375424)) * services * 0
And the result in the listener.log file when i try to connect to the database using sqlplus:
Fri Dec 13 13:54:24 2013
13-DÉC. -2013 13:54:24 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BDVINOU)(CID=(PROGRAM=D:\app\vincent\product\12.1.0\dbhome_1\BIN\sqlplus.exe)(HOST=VINOU-LT)(USER=vincent))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51407)) * establish * BDVINOU * 12514
TNS-12514: TNS : le processus d'écoute ne connaît pas actuellement le service indiqué dans le descripteur de connexion
And when i try to get data about the status (lsnrctl status), i get:
D:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 12.1.0.1.0 - Production on 13-D╔C. -2013 14:
10:22
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connexion Ó (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUT du PROCESSUS D'ECOUTE
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 12.1.0.1.0 - Produ
ction
Date de dÚpart 13-D╔C. -2013 14:08:00
DurÚe d'activitÚ 0 jours 0 heures 2 min. 21 sec
Niveau de trace off
SÚcuritÚ ON: Local OS Authentication
SNMP OFF
Fichier de paramÞtres du processus d'Úcoute D:\app\vincent\product\12.1.0\db
home_1\network\admin\listener.ora
Fichier journal du processus d'Úcoute D:\app\vincent\diag\tnslsnr\Vi
nou-LT\listener\alert\log.xml
RÚcapitulatif d'Úcoute des points d'extrÚmitÚ...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
RÚcapitulatif services...
Le service "CLRExtProc" comporte 1 instance(s).
L'instance "CLRExtProc", statut UNKNOWN, comporte 1 gestionnaire(s) pour ce se
rvice...
La commande a rÚussi
I am always a little lost. I am sorry but i am a newbie. -
IDM Demo always reports connection failed for Solaris target
I'm setting up the IDM Demo, using the Setup Wizard, using a Solaris 10 container as
the target system. For this demo, I'm using telnet directly as root, which seems to be
the only method available. This succeeds when I run telnet by hand from the IDM host
to the target host. When I test the connection from the wizard, after a long delay, it
always reports that the test connection failed. However, the console log on the target
system shows a successful login. The Details button says that it was looking for `_.)#+(:',
regardless of what I specify as the `Login Prompt'. (I assume this really means the shell
prompt.) I've tried changing the shell prompt by setting PS1 in /.profile and tried suppressing
the banner by creating a /.hushlogin file. Still, the test button always reports that the
connection failed. What's wrong here?ah, familiar territory :)
the string _.)#+(: is something that the adapter uses as a suffix to check whether the previous command executed has changed state or not. The assumption being that _.)#+(: will not be encountered as output of any command on Solaris.
1. Try connecting as root
2. Whats your IDM version?
3. Try this: login as root over putty, and paste whatever strings you get into the adapter configuration page on IM (for say, prompt, etc.)
4. Tracing the following variables can give you better details regarding where its getting stuck:
com.waveset.adapter.SolarisResourceAdapter
com.waveset.adapter.SVIDResourceAdapter
com.waveset.adapter.ScriptedConnection
Hope this helps!
Ankush -
The method to provision the OIM System Date to a target System
Hi,
I want to provision the OIM System Date(date format : "YYYY-MM-DD HH:MI:SS") to a target System(DB Type:Oracle).
The Column type in The target System is Date Type.
I use the process adapter and assign the System Date to the Process Data - Date Type Column - in the target System.
it doesn't work.
How do i do?????
please help me- That's simple. You have already created this date type variable in your process form. Now pass it in whichever format it is. In your code for creation in oracle, do a date conversion as required using custom code. This would work if you have written your code and you are not using DBApp Tables connector. Do it as follows:
SimpleDateFormat input = new SimpleDateFormat("OIM_DATE_FORMAT");
SimpleDateFormat output = new SimpleDateFormat("ORACLE_DB_DATE_FORMAT");
Date date = input.parse("Pass form date over here");
return output.format(date); // Pass this value to Oracle
- If its DBApp Table connector then connector must take care of this by itself.
Thanks
Sunny
Maybe you are looking for
-
IPhone 4S no longer seeing 5 GHz Wifi signals with iOS 7
iPhone 4S no longer sees 5 GHz wifi band. With iOS 6 the phone saw and connected to the 5 GHz band. I just updated to iOS 7 and the band is not even shown. The 2.4 GHz band was always seen, and now it's the only one. Restarting did not ameliorate the
-
i was on windows 7 and i had to format my computer i put windows vista on and when i downloaded itunes and sync my iphone i lost all my photos music and apps that was on my phone,my itunes account says i have got to accounts on two computers?? is the
-
How do you deauthorize a computer if the computer has quit.
My computer has died. Persons think it is the logic board. I can make it a slave drive to see data on the computer. How do i deauthorize iTunes on that computer?
-
Can I sell old versions of photoshop?
Is it possible to sell old versions of photoshop I've purchased over the years? I'm assuming I'd need to notify Adobe regarding license #, etc..
-
How to define Budget on Profit Center level
Hi All, is it possible to define a budget on profit center level in SBO 2005A SP01. My understanding ist, that a budget can only be defined on account level (if marked as 'relevant for budget). If not possible - any idea/solution how to do it? Thank