Characteristic "Master Data" setting in Query definition not working?

Hi,
I am having a problem with a query definition. (BI 7.0)
The query comprises the following definition which relate to displaying Milestone dates for respective projects in a time series so the dates are populated in the correct column in a time series:
Filter
Project Definition = Fixed Single Project Definition
Fiscal Year Variant = K4
Project Profit Centre = Hierarchy Node
Project Plant = Fixed Single Value
Free Chars
Network
Network Activity
Activity Element
Rows
Project Plant
Project Profit Centre (With hierarchy)
Project Definition
Milestone Type (Setting in characteristic to pick up Master Data)
CSR Relevant    (Setting in characteristic to pick up Master Data)
      Structure
           Actual
           Scheduled
    (Actual: Value type = Actual, Origin = Manual ,Event = Start)
    (Scheduled: Value type = Actual, Origin = Scheduled ,Event = Start)
Columns
Key Figure structure of 12 key figures in a time series
Selection
Key Figure = Date
Fiscal Year/Period = Current Fiscal Year / Period (SAP EXIT) (With Offset 1 to 12)
FYI
When I run the above it comes back correctly. However when I add "MILESTONE" (Characteristic setting (Posted Values) to the Query Definition immediately after the "Milestone Type" and before CSR it does not work it just is hanging for a considerable time.
I am not using "Master Data" for the "Access Type for Result Vales" for the additional characteristic "MILESTONE" just "Posted Values".
I was expecting that it would just show all Milestone types as per Master Data but just the Milestones that are posted for this result.
I would appreciate a solution to this issue and an explanation to why it hangs when I add the "MILESTONE" characteristic to the definition as explained above.
Thanks in advance..
Stevo

Hello there,
Putting Milestone in the rows in the query definition is not being hang there (i.e., while creating and saving the query) right?
It is stucked while executing the query isn't it so?
That's because you have too many records to be desaggregated by milestone characteristic, and this is indepently of posted values in the characteristic settings.
Putting milestone characteristic in the free characteristics will allow you to run the query, but desaggregate it (add it to the rows) will be to much information to read from your dataprovider (this is just a guess).
If it is being stucked in query execution whike milestone is in the rows. Try this for example:
Add milestone to the free chars. Execute the query. Filter milestone characteristic while still in the free rows and choose a value that you are pretty sure has the smallest records in the Dataprovider (could be for example value #). Than drill down milestone to the rows. You'll see that it can be executed without any problem.
Diogo.

Similar Messages

Queries based on Master data for the particular periods not working

Hi,
My Queries are based on master data and for 2007 we did not have customer groups define hence for the historical also we would like to display the customer groups hence we are reproting based on master data. But when iam executing my reprots for each and every month for the 2007 , i can able to execute the reprot properly but same when iam giving the values in ranges with the help of input filed ( calender month -interval) its taking hours but unable to retrieve the data for the 6 months at a time even if iam restricting the values in the queries still the problem is same...
Can anyone has an idea what would be the problem .. its only for 6 months
Thanks

Hi
Master data report consumes much time. try to see the Query Statistics and make the performance tuning.
Recheck your data flow for routines at TRules/upRules level.
Recheck on the Query designer for formula/ Cmod Variables.
The report fetching time even depends on the NO.of records too.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06dcd70-41a8-2b10-9f8f-dc5c68769753
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6009e125-e9a3-2a10-c6a9-e1483dfa2e1b
Hope ithelps

Force read/refresh of master data attributes on query

Hi there,
We're having troubles with one input ready query that changes and attribute value (KYF) of one characteristic. That works fines and whe can save changed data on the infoprovider via DTP. Problem is when data is saved we need to refresh query as whe have both values on screen (original value as char attribute on rows) new value as input ready KYF, so after save we would like to see that both values are the same.
Is there any way of force query no to read from caché as whe are changing master data attributes. I read something about IF_RSMD_RS_ACCESS class that can be implemented on Master Data access and force it there but sounds really hard so if this is the way can some of you guys give us some help.
I hope I make myself clear on the explanation...
Thanks in advance,
Regards
Carlos

Dear All,
The recent days that I tried working on changing master data attributes through BPS didn't work out.The Primary reasons was that some of the attributes that I needed to change were not present in the transaction or planning cubes and the characteristics that are not part of your cube on which the planning area is based then you can not do changes on them.
This is my undestanding .Please correct me if I am wrong.
Besides , I was also thinking if we can do the same through portal.i.e retriving the master data infoobject ( based on the value seleceted for that infoobject by the user ) and its attributes in the portal , edit them and save them back so that the updated values goes back to BW master data infoobject data base tables and updates the value.
Eg . I have Natural Account master data infoobject in the BW with attributes fucntional area and expense center.Based on the user selection of any values for the Natural account lets say 01110 , then for 01110 natural account the portal should display the correspoding attributes values of fucntional area and expense center.Lets take this values as 10 , 20 respectively for fucntional area and expense center . What I want to do now is to change these attrbute values to 30 and 40 and I would like to save it back as the changed attribute values for that natural account for 01110 with new attribute values 30 & 40 respectively for fucntional area and expense center .
Is this possible through portal and BW?
Any idea on this would be appriciated.
Regards,
Ankit
Edited by: Ankit Bhandari on Nov 21, 2008 12:21 PM
Edited by: Ankit Bhandari on Nov 21, 2008 12:32 PM

Master data values in Query

Hello,
i want to restrict division by certain value in a query. i cannot see one of such values in the restriction window in the available list of values.
i checked master records for division and it has this value. the infoprovider may not have this value.
in the 0division infoobject the settings in the business explorer tab are:
Query Def. Filter Value Selection: M Values in master data table.
Query Execution Filter Val. Selectn:M Values in master data table.
Why can't i see the value in the query for restriction?
thanks

Hi Aby,
<i>Have you tried clicking on the "display other values" button right before the find text box in the restriction window (the one with the small yellow arrow)? If not, then click on tht button and put in some restriction rule to cut down on the number of entries displayed. This should display the value you desire.</i>
In addtion to that uncheck 'only values from InfoProvider'
regards

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

Does Master data presents in ODS or not?

Dear One's..........
Does Master data presents in ODS or not? if yes, how ? and where can we see?
Thanks,
Raj

Hi,
Master data is not present in ods.
check the link .
http://www.bridgeport.edu/sed/projects/cs597/Fall_2003/vijaykse/extended_star_schema.htm
Regards,
Krishna.

Temporary Table In SAP Query - Does not Work?

DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF OBJECT_ID('tempdb..##tab) IS NOT NULL DROP TABLE ##tab
CREATE TABLE ##tab
[Date] date,
[Delivery Rows] varchar(40),
[Delivery Total Units] varchar(40),
[Receipts Rows] varchar(40),
[Receipts Total Units] varchar(40),
WHILE @a!=7
     BEGIN
     SET @date=DATEADD(day,-@a, getdate())
     SELECT @delrows=ISNULL(COUNT(DLN1.[LineNum]),0), @delquan=ISNULL(SUM(DLN1.[Quantity]),0)
     FROM ODLN
     INNER JOIN DLN1 ON ODLN.[DocEntry]=DLN1.[DocEntry]
     WHERE ODLN.[CreateDate] = @date
     SELECT @recrows=ISNULL(COUNT(PCH1.[LineNum]),0) , @recquan=ISNULL(SUM(PCH1.[Quantity]),0)
     FROM OPCH
     INNER JOIN PCH1 ON OPCH.[DocEntry]=PCH1.[DocEntry]
     WHERE OPCH.[DocDate]=@date
     SET @a=@a+1
          INSERT INTO ##tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM ##tab
{/code}
Can anyone explain why this query does not work in SAP? It works fine on SQL but gives me this message in SAP:
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near ')'.
2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'Service Contracts' (OCTR) (s) could not be prepared.
Edited by: Chris Candido on Feb 2, 2011 8:38 PM

Chris,
There are several areas in your code which needed changes.
1. On the field name for your temp table you had spaces.
2. The SAP table name ODLN, OPCH, PCH1 had to be fully referenced like
[dbo].[ODLN]
3. You really need not have ## in front of your temp table, it could just be #
The select at the end is actually what causes the most problem as for some reason from within SAP it does not produce the result. I would suggest you put the whole code into a Stored Procedure and call the SP from SAP. Corrected SQL below. If you remove the Select line at the end the query would work with in SAP, but keep it give give you an error. SP is the best option for this.
DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF object_id('tempdb..#tab') IS NOT NULL
BEGIN
   DROP TABLE #tab
END
CREATE TABLE #tab
[Date] date,
DeliveryRows varchar(40),
DeliveryTotalUnits varchar(40),
ReceiptsRows varchar(40),
ReceiptsTotalUnits varchar(40),
WHILE @a!=7
BEGIN
SET @date=DATEADD(day,-@a, getdate())
SELECT @delrows=ISNULL(COUNT(DLN1.LineNum),0), @delquan=ISNULL(SUM(DLN1.Quantity),0)
FROM [dbo].[ODLN]
INNER JOIN DLN1 ON [dbo].[ODLN].DocEntry=DLN1.DocEntry
WHERE [dbo].[ODLN].CreateDate = @date
SELECT @recrows=ISNULL(COUNT([dbo].[PCH1].LineNum),0) , @recquan=ISNULL(SUM([dbo].[PCH1].Quantity),0)
FROM [dbo].[OPCH]
INNER JOIN [dbo].[PCH1] ON [dbo].[OPCH].DocEntry=[dbo].[PCH1].DocEntry
WHERE [dbo].[OPCH].DocDate=@date
SET @a=@a+1
INSERT INTO #tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM #tab
Suda Sampath

Excel 2010 MS Query is not working

Hi, I am in the process of upgrading all my Excel 2003 spreadsheets to Excel 2010. I am running into problem with the MS Query. Spreadsheets have MS Query linking to MS database. However, when I open some of the spreadsheets, the MS Query
is not working ie. the blue circle keeps turning and then not responding. It is very weird that this MS Query is working fine with some spreadsheets but not couple and they are all linking to the same database except a small different in criteria. I
tried to re-create the Query in the spreadsheet in Excel 2010 by going to Data>From Other Sources>From Microsoft Query and select the database. Once I set up the criteria and click Return data, the Query gets stuck.
Please help! Any comments/suggestions will be appreciated.
Thanks

Hi,
There are many possible causes that can crash MSQuery in Excel 2010.
First, please make sure we have installed the latest Office 2010 and Windows patches.
Second, Please read the Blog, it explains one typical crash scenario.
=====
AppName: msqry32.exe AppVer: 14.0.4750.1000 ModName: msvcr90.dll
There are several possible resolution you can try to resolve the above crash:
1. When you launch MS Query, just disable the option "Validate queries before saving or returning data", this is the fifth box in the options menu.
The only problem is that if you have made any mistake in your query, you'll only be noticed when receiving the data in excel.
2. Repair all the keys into registry at the following place:
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
For example:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
"TraceFile"="C:\\DOCUME~1\\...USERNAME...\\IMPOST~1\\Temp\\SQL.LOG"
"TraceDll"="C:\\WINDOWS\\system32\\odbctrac.dll"
http://blogs.technet.com/b/asiasupp/archive/2011/11/07/msquery-randomly-crashed.aspx
=====
Third, start the Excel 2010 with
safe mode, it helps us confirm if some add-ins cause this issue.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
Office programs.

'Get All New Data Request by Request' option not working Between DSO n Cube

Hi BI's..
Could anyone please tell me why the option ' Get one Request only' and 'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
Scenario:
I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to 'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
Regards,
Sari.

Hi,
How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
Delta Init. Extraction from...
- Active Table (with archive)
- Active Table (without archive)
- Archive ( full extraction only)
- Change Log
Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

Bex Query is not working in portal

Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENU

Hi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank

Select query is not working in BDC Program

Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........

If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
    where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
    where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
    FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond

Why select query is not working?

CREATE OR REPLACE TYPE prod_type AS OBJECT (
pid INT,
pprice NUMBER,
MEMBER PROCEDURE display(pid IN NUMBER));
create table prod of prod_type (pid primary key);
CREATE OR REPLACE TYPE deal_type UNDER prod_type (
ctr NUMBER,
OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
insert into prod values(deal_type(101, 4, 1));
insert into prod values(deal_type(102, 5, 0));
------below given select query is NOT WORKING ---------
select ctr from prod p where p.pid=101;
Thanks,
-Nid

------below given select query is NOT WORKINGWondering how you inserted data ...
SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
2 pid INT,
3 pprice NUMBER,
4 MEMBER PROCEDURE display(pid IN NUMBER));
5 /
Type created.
SQL>
SQL> create table prod of prod_type (pid primary key);
Table created.
SQL>
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
4 );
5 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
4/1      PLS-00103: Encountered the symbol ")" when expecting one of the
         following:
         , not pragma <an identifier>
         <a double-quoted delimited-identifier> final instantiable
         current order overriding static member constructor map
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
4 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
1/1      PLS-00590: attempting to create a subtype UNDER a FINAL type
SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
Avoid deriving a subtype from this FINAL type.
HTH

[svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

Is it this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Otherwise:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Query is not working correctly

Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5

user9522927 wrote:
Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5I couldn't see through the internet what happend when you ran said query. How about helping us out by showing us the evidence that it "is not working correctly".
"Here's a picture of my car sitting in the driveway. Why won't it start?"

Characteristic "Master Data" setting in Query definition not working?

Similar Messages

Maybe you are looking for