Managing warranties for equipment components

Hi! I have the following issue:
I need to implement a solution where user can manage warranties for equipment's components besides the equipment warranty. User requires that when a new component is assigned to an equipment, like bill of materials or any other way..system advises him when creating a notification or maintenance order over the equipment, if any of its components is under warranty, eventhough equipment  warranty period had expired.
Does anyone know any way how to manage it?
Thanks in advance,
Regards,
Eva

Hi,
I beleive it won't possible thru standard..
Please check below exits..Hope it may helps you.Take help from ABAP er to meet your requirement.
BG000001 |User Exit: Warranty Check                                   |
BG000002
User Exit: Warranty Check Dialog Box
|  BG000003 |User Exit: Subscreen for Changing Warranty Check Result
Kuber

Similar Messages

  • 1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

    1)
    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
    i. The list of the modules that are being managed by SAP Solution Manager(s)
    ii. The performance metrics of those modules/components at the high level
    iii. The information about Early Watch Alerts (or situations to watch for)
    2)
    Is there a full SNMP interface for getting the above information from SAP Solution Manager?
    3)
    Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
    4)
    Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

    Mugunthan
    Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
    One of them is
    ===========>>>
    Uploading snapshot to central instance failed, with 3 different messages
    Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
         at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
    please assist.
    regards
    girish

  • Is there any way to Authorization Management for Material Components?

    Hello every body
       Is there any way to Authorization Management for Material Components? 
       For example  i want to create , delete , modify  Material Components,how i can Authorization Management ?
       Enhancement or IMG or other ways?
                                                                                    thanks

    Alas, no, not in VBA.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Looking for a good Password Manager App for the iPhone

    I'm looking for a good and reliable Password Manager App for the iPhone with sync capabilities on macs. I've read several reviews on several different apps on iTunes, and either they don't work properly, or they're a rip off, or they just don't sync or all of the above. Any recommendations?
    Thanks in advance.

    I've been very happy with 1Password, though I haven't used the iPhone component (not having an iPhone).
    Disclaimer: any product suggestion and link given is strictly for reference and represents my opinion only. No warranties express or implied. I get no personal benefit from the sale of any product I may recommend in any of my posts in the Discussions. Your mileage may vary. Void where prohibited. You must be this tall to ride. Objects in mirror may be closer than they appear. Preservatives added to improve freshness. No animals were harmed in the making of this post.

  • Interface between Legacy and SAP for Equipment Master

    Hello
    I got a requirement where I need to develop a interface between legacy system and R/3 system for Equipment Master Data update in R/3. I am thinking of getting a Idoc file from Legacy and then update the changes or any new creation of Equipments in R/3. I found a standard BAPI for this BAPI_EQUIPMENT_CREATE/CHANGE. This BAPI use a strcture BAPI_ITOB for data record of IDoc. But I got more data from legacy except what we have in BAPI_ITOB. I got Partner Data, Classification data also for Equipments. I am thinking of copying the BAPI to a Z function module and modify the Idoc structure , message type and all to capture all the data and then do a update in same way as standard transaction IE01(Equipment Create) is doing in Batch Input. Do you think if there is any better way of doing this? I am not used to transaction BAPI . just wondering if we Can use that in someway to include our modification?
    Thanks
    Harkamal

    20,000 is on quite higher side for IDOC.
    IBIP help doc says it needs 2 Kbyte for each record, i.e. 40 Mb for 20,000 rec. that should be ok. Since it has structures for Partner & classification data , I don't think u need to modify the BAPI.
    Transaction IE01 - Create equipment
    Transaction IE02 - Change equipment
    Structure - IBIPEQUI Equipment record
                     |->    IBIPNSTA     New status profile if necessary
                     |->>   IBIPSTAT     User status records
                     |->>   IBIPDOCU     Doc. from Doc. management system
                     |->>   IBIPPART     Partner details (comment below)
                     |-->>  IBIPTEXT     (see comment below)
                              for long text:          TEXT_MARK = " " empty
                              for internal comment:   TEXT_MARK = "1"
                     |-->>  IBIPCLAS    Classification record (eqpmt class)
                         |-->> IBIPFEAT     Classification characteristics,
                                               ie. features for the class
                     |-->>  IBIPBDCD     see below (from screen 102)

  • Batches not getting  for order components at time of order creation

    Hi Folks,
    My requirement is that when I create a production order and save automatic batch determination should take place for all components. For this I have done all the settings for eg
    1) Assigment of batch search proceduree to order type
    2) Define batch search strategy,procedure , condition , access sequence
    3) Create batch strategy record for order type/ plant/component by COB1
    4) Create sort rule and assign to batch strategy record
    5) Batch classification is there and value of the sort chracteristic is populated in all batches
    6) There is enough available stock in the batch at that storage location
    But batch field is not getting populated .. Even if I press the batch determintion button manually
    on the component overview screen batch selection screen is appearing but no batches are getting determined for selection .I have checked the selection criteria and it is correct and I was expecting batch 'ZSWETA' to b determined as it is satisfying the selection criteria. I am really wondering why this is happening as I have done all the required config settings but batch determination is not happening..
    Can you please help me out of this...
    Regards
    Suchandra

    Hi,
    kindly check the following things-:
    Material master -: Purchasing View tick in check box of Batch Management
                               MRP 2 -:Batch Entry(Select 3-Auto Batch entry on Release)
                              Work Scheduling -: Batch Entry & Batch Management.
    hope it will help you to get the auto Batch Number.
    Regards,
    Mukesh

  • Subcontracting PO - Batch number to be made mandatory for the components

    Hi All,
    I have a situation in Subcontracting PO. The components which are sent to vendor need to be updated with Batch number. Is there any User Exit  / Configuration available, which can provide a error message to the user when ever he tries to save the PO without the batch number entered for the components.
    SAP allows to save the SC-PO, if the batch numbers are not entered for the components which are batch managed. I have checked the PO Fields in Customizing, which has control of the Batch number for the header material in the material data tab & not for the components which will be available after the BOM icon is clicked.
    Appreciate if you experts provide a solution / work around for the above scenario, as the client is a pharma client & they need to exactly match the batch which has been sent out for making Finished product with the Sub contracting vendor.
    Thanks for your help & awaiting your reply at the earliest.
    Regards,
    Sathya Padmanabhan

    Hi,
    you shoudl definitively check out SAP best Practices for Pharmaceuticals, which can be foubnd in the helpportal:
    http://help.sap.com/bp_pharmav1600/Pharma_US/index.htm
    Go to the Business Information area....there are some subcontracting scenarios....
    Oliver

  • EP 7 systems in Solution Manager 7 for EWA activation

    Dear Expert,
    Greetings from Partha.
    I need to include our EP 7 systems in Solution Manager 7 for EWA activation. Current lanscape scenario
    Solution Manger     7.00   Installed
    EP                          7.00   Installed
    No central SLD configured and all the system have local SLD.
    1. As per the installtion guide & SAP notes we need to install
    a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
    b> Diagnostics Agent in every manged system(s).
    For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
    at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
    --> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
    --> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
    --> <choose operating system of managed>
    Our Solution Manager 7 is already installed and @SPS 17. My question is
    1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
    If it is different then kindly let me know what are the DVDs to be downloaded and from where?
    2. In our Managed System SMD installtion we have decided for
    --> Installation Strategy as Direct Solution Manager Registration
    But what strategy we should take for SMD installation on Sol Man 7 that is
    Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
    3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
    Help will be appreciated.
    Regards,
    Partha

    1. As per the installtion guide & SAP notes we need to install
    a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
    b> Diagnostics Agent in every manged system(s).
    For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
    at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
    --> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
    --> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
    --> <choose operating system of managed>
    Our Solution Manager 7 is already installed and @SPS 17. My question is
    1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
    If it is different then kindly let me know what are the DVDs to be downloaded and from where?
    Check the pdf attached in note 1234387 - Inst. 7.1 EhP1 - Diagnostics Agent installation
    If you have SP17, you must follow note 1357812 and install Diagnostics Agent 7.01 SR1
    2. In our Managed System SMD installtion we have decided for
    --> Installation Strategy as Direct Solution Manager Registration
    But what strategy we should take for SMD installation on Sol Man 7 that is
    Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
    It doesn't matter what strategy you'll decide. You could decide Direct Solution Manager registration
    3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
    As you have solution Manager SP17, you can't install Saphostagent 7.11 and for this reason you can't use SAphostagent.
    Agent 7.01 => No Saphostagent
    Agent 7.11 => Must install saphostagent
    Agent 7.20 => Already have SAPhostagent installed

  • Restriction on memory scope for UI components binding

    Hello
    I'm using JDeveloper 11g 10.1.1.3
    I found in the Fusion Developer's Guide for Oracle ADF (14 Getting Started with ADF Task Flows) next thing:
    <i>
    Restrict the scope of the managed bean that you reference through a UI component's binding attribute to backingBean or request scope. Instances of UI components cannot be serialized. Objects in scopes other than backingBean and request are expected to be serializable. For this reason, you should not bind UI components to managed beans that have a scope other than backingBean or request. Note that JDeveloper defaults the binding attribute for UI components and region fragments to use the backingBean scope.
    </i>
    By now I often have binded UI components to the managed beans with pageFlowScope or viewScope, but I have not got problem with that.
    So, question is: what is the case that managedBean with view or pageFlow (even or session) memory scope will be needed to be serialized?
    When could I get the problems with that?
    Anatolii

    For more details you may have a look at section 20.4.3 here:
    http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/web_getstarted.htm#CACCFIII
    http://download.oracle.com/docs/cd/E17904_01/web.1111/b31973/gs_jdev.htm#ADFUI11666
    Dimitar

  • Creating management accounts for protected accounts and groups in Active Directory

    I'm following step-by-step instruction for creating management accounts for protected groups that I found in Microsoft book "Best Practise for Securing Active Directory", published april 2013.
    What is confusing me is the "Enabling management accounts to modify the membership of protected groups" step. When I use DSACLS command:
    Dsacls "CN=AdminSDHolder,CN=System,DC=MyDomain,DC=com"/G
    [email protected]:RPWP;member
    what I have to type insted of "member".
    When I use previous command with simple "member" at the end I dont get this:
    Verify that the account has been granted only Read Members and
    Write Members permissions on the DA group, and click OK.
    My account have flag on all properties.
    I hope You understand me.

    The last field is for the attribute to delegate. You can read about it here: https://technet.microsoft.com/en-us/library/cc772662%28v=ws.10%29.aspx
    You can also refer to this for updating AdminSDHolder container: http://social.technet.microsoft.com/wiki/contents/articles/22331.adminsdholder-protected-groups-and-security-descriptor-propagator.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Process for equipment renting

    Hi ,
    If anybody has come across the process of equipment renting kindly throw some light to me.
    Highlight of the process:
    1) Monthly / daily charge for the rented equipment from the customer.
    2) Tracking of the equipment.
    3) Inventory management of the equipment.
    Please provide the steps if you know this process.
    regards
    DP

    Hi
    This is standard procedure in CS known as periodic billing with service contract
    You can create Service contract
    In contract EXTRA menu Technical object, where you speciefy equipment
    Then adjust your billing plan in contract itself as per you requirement daily or monthly
    latter on go to t-code VF04 billing due list select indicator order related billing then execute.
    kapil

  • SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)

    Hello Folks,
    I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
    SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
    SAP Support Enablement package (software component: ST-SEP)
    Does anyone know where to get those components?
    Thanks a lot,
    Marco

    Hi Ravindra babu/ Murali:
    I have one very quick doubt and would be really glad if you can help clarify.
    As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
    Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
    The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
    Regards,
    Srini

  • Management Center for CSA v.6.0

    Help me please to solve the problem.
    I had installed Management Center for Cisco Security Agent v.6.0. However I can't generate Agent kit.
    The status of all Agent kit is "Needs rule generation". I try to generate rules but there is an error - Failed to prepare rules: Cmd_BulkInsert failed.
    When installing MCCSA there is such an error in logs (CSAMC60-Install.log):
    [10-14-2008 14:42:41]: Setup is generating rule programs
    [10-14-2008 14:42:41]: C:\Program Files\Cisco\CSAMC\CSAMC60\bin\webmgr.exe
    generate
    [10-14-2008 14:42:43]: --50-- Start Process Log ==> webmgr.exe
    [10-14-2008 14:42:43]: Error preparing rules/vars: Cmd_BulkInsert failed.
    [10-14-2008 14:42:43]: --50-- End Process Log ==> webmgr.exe
    [10-14-2008 14:42:43]: WARNING: Command failed. Returned error code is 1
    [10-14-2008 14:42:43]: Unable to generate rule programs.
    [10-14-2008 14:42:43]: Due to the failure, the agent kit will not be
    installed on the machine.
    [10-14-2008 14:42:43]: Reboot the machine after the installation and login
    to the MC.
    [10-14-2008 14:42:43]: Click on 'Generate Rules' and then install the
    Management Center Agent kit.
    In logs (csamclog.txt) MCCSA the error is as follows:
    1: csa: Oct 17 2008 14:21:49.128 +0400: %CSA-6-TRACE:
    %[Component=WebMgr][PID=4976]: Call to function bcp_exec failed and returned
    0
    2: csa: Oct 17 2008 14:21:49.128 +0400: %CSA-6-TRACE:
    %[Component=WebMgr][PID=4976]: BulkCopy failed on file C:\Program
    Files\Cisco\CSAMC\CSAMC60\tmp\tmp_rid_49761224238909.dat
    3: csa: Oct 17 2008 14:21:49.138 +0400: %CSA-6-TRACE:
    %[Component=WebMgr][PID=4976]: Failed to prepare rules: Cmd_BulkInsert
    failed.

    I've run into this a while back, BULK INSERT operations failing with no apparent reason.
    Reapplying the latest SQL Server service pack and/or the latest MDAC (on the MC system) resolved the problem.
    I would start with the MDAC refresh, it may be enough to fix this.
    (MDAC = Microsoft Data Access Components, available at http://msdn.microsoft.com/en-us/data/aa937730.aspx)

  • Solution Manager prepared for the Remote Service Delivery?

    In preparation of GoingLive Session, we received a mail with some questions. Among them the following:
    Is your Solution Manager prepared for the Remote Service Delivery? Yes/No  
    Is the solution transferred to SAP?: Yes/No  
    What does the first question mean? what should be done to prepare the Solman for session delivery?
    How do I check if the solution is transferred to SAP?
    Thanks a lot,
        Dino

    Hello Dino,
    The SAP Solution Manager is a platform for the delivery of services for the following areas:
    ●     Risk minimization
    ●     Optimization of SAP solutions
    ●     Knowledge transfer
    Services in the SAP Solution Manager are services which help you to monitor and optimize the performance and availibility of your system landscapes and minimize your system operation risks.
    You can have the support services performed by SAP or perform them yourself:
    ●     Remote Services
    SAP experts deliver this service type via a remote connection (SAP Safeguarding Services, e.g. SAP GoingLive Check).
    For checking whether solution manager is prepared for remote service delivery u need to check the following.
    Prerequisites
    You have:
    ●     created a solution.
    ●     set-up a connection to the SAP Service Marketplace (Explorer).
    Procedure
           1.      Choose the transaction SOLUTION_MANAGER.
           2.      Choose Delivery of SAP Services ® Service Plan, in Operations.
           3.      Choose Order Service from SAP.
    You go to the Service Catalog.
           4.      Choose the link to the service.
    The system goes to the catalog entry of the service, in the SAP Service Marketplace.
           5.      Follow the procedure described in the SAP Service Marketplace.
    =============================================
    Solution transfered to SAP means that the u have done the configuration, testing and validation of the SAP system components and then transfered this to the satellite systems connected to Solman. Please note that solman is the central point of access for supporting implementation activities and the satellite systems are SAP systems comnected to solman in the landscape.
    Hope this helps. Please assign points and let me know if u need anything specific.
    Rgds
    Manish

  • Maintaintaining warranties for old objects on previous dares.& Warranty chk

    HI
    Scenario: We have asset materials like PC'S, we need to mainatain warranties for these materials from previous date(eg:01/01/2006).
    Warranty check has to be carried out for these asset material with serial numbers
    We have maintained material with serial numbers ( material type-aset),& Equipment master data are getting generated automatically by system for each serial number.
    We have maintained counter(charecterstics-CT04) with measurement point,posn for these euipment master.& then measurement document (IK11)is created for the measurement point with reading.
    Master warranty is maintained for the only material (No provision for maintaining serial number) with counter & value.(eg 12 Months).
    But when we try to run warranty check using A200 (Warranty check) when creating warranty claim (T-code WTY),No results are displayed.
    Is there any any direct transaction for warranty check for material with serial numbers?
    Suggestions on this are helpful
    Thanks
    SNEHA

    Thanks again, but IE only check the xml file for well-formedness and doesn't validate it against a dtd or schema if one is assigned. So I take it then that the web.xml file is an application and you don't necessarily validate it like you do with a regular data xml file?
    Sorry for the stupidity on my part, but I really appreciate your help!

Maybe you are looking for