CJ20N-fields are not getting updated in table PROJ

Hi all,
I have a requirement where I need to transfer the WBS element data created in one system to another using IDOC.
The idoc has generated sucessfully and was also sent/processed successfully in the recieving system but fields STSPD and STSPR are not getting poulated in table PROJ.
In the confic I have assigned FM:IDOC_INPUT_PROJECT to the process code.
Thanks,
Gaurav

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

Similar Messages

Date and time fields are not getting updated in database

Hi,
I am Using the bapi SD_SHIPMENT_HEADER_CHANGE in my program ...
I am using bapi_shipemnt_create for creating shipment document but, trying to enter the date fileds using this bapi .
can anybody please tell me how shud i pass this variables exactly ...
i tried giving test data and checked this bapi .. the result in changing parameters is also appearing but in databade itself the date fields are not getting reflected ...
The fields ate DTDIS ,UZDIS, DATEN,UATEN. ( i am trying to map these fields in changing parameters)
          gw_vttkvb_new-mandt = sy-mandt.
          gw_vttkvb_new-tknum = gw_return-message_v1(passing shipment number )
          gw_vttkvb_new-dtdis = gi_ship_doc-dtdis.
          gw_vttkvb_new-daten = gi_ship_doc-daten.
          gw_vttkvb_new-uzdis = gi_ship_doc-uzdis.
          gw_vttkvb_new-uaten = gi_ship_doc-uaten.
          APPEND gw_vttkvb_new TO gi_vttkvb_new.
          CALL FUNCTION 'SD_SHIPMENT_HEADER_CHANGE'
          EXPORTING
            i_tvtk                             = '
          I_DESTINATION                      =
          I_DEPARTURE                        =
          OPT_DIALOG                         = 'X'
        IMPORTING
          E_SERV_AGENT_FROM_DELIVERY         =
          E_ROUTE_FROM_DELIVERY              =
          E_LEG_DETERMINATION_DONE           =
          E_NUMBER_OF_CHANGED_LEGS           =
             TABLES
               c_xvttk                            = gi_xvttk
               c_yvttk                            = gi_yvttk
               c_xvttp                            = gi_xvttp
               c_yvttp                            = gi_yvttp
               c_xvtts                            = gi_xvtts
               c_yvtts                            = gi_yvtts
               c_xvtsp                            = gi_xvtsp
               c_yvtsp                            = gi_yvtsp
               c_xvbpa                            = gi_xvbpa
               c_yvbpa                            = gi_yvbpa
               c_xvbadr                           = gi_xvbadr
               c_yvbadr                           = gi_yvbadr
               i_xtrlk                            = gi_vtrlk
               i_xtrlp                            = gi_vtrlp
          I_DEPARTURE_SEQUENCE               =
          I_XVTFA                            =
          I_YVTFA                            =
             CHANGING
               c_xvttk_new                        = gi_vttkvb_new
            EXCEPTIONS
              invalid_change                     = 1
              route_insert_failed                = 2
              tdlnr_insert_failed                = 3
              status_planned_failed              = 4
              status_registrated_failed          = 5
              status_loading_start_failed        = 6
              status_loading_end_failed          = 7
              status_completion_failed           = 8
              status_shipment_start_failed       = 9
              status_shipment_end_failed         = 10
              OTHERS                             = 11.
          IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ELSE.
             **** Save shipment created
           CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         WAIT          =
              IMPORTING
                return        = gw_return.
          ENDIF.
Regards,
shilpa talluri .

Hi,
Try this
DATA: wa TYPE zvariant.
wa-mandt     = sy-mandt.
wa-z_var     = 'test'.
wa-projid      = 'test'.
wa-relid        = 'test'.
wa-srtf2       = 'test'.
wa-clustr      = 'test'.
wa-clustd     = ''test'.
INSERT zvariant CLIENT SPECIFIED FROM wa.
Raul Natu

Few keyfigures are not getting updated in the backup cube

Hi,
We run the daily backup process chain which extract data from planning
area and store in the cube & ods.
There are infopackages which update cube & ods, the datasource & info
source is same for both ODS & backup cube.
But a few keyfigures do not get updated in backup cube where as we see
ODS getting updated for those keyfigures. Also there exist data in the
planning area for these keyfigures.
There is direct mapping between the keyfigures in cube & planning area.
We tried to debug it and noticed that data gets updated in update routine table but not get updated in cube.
There are total 25 keyfigures in the cube , out of this only 5 keyfigures are not getting updated.
Need expert opinion on this.
Regards,
Chetana

Hi Chetana,
Check the backup step in your process chain. The Data Selection tab may have certain conditions on account of which certain keyfigures in your Backup Cube are not getting updated.
Check if any ABAP routine or any selection conditions are maintained which are causing certain keyfigs to be excluded.
~Rishi

HIREDATE & FIREDATE of Employee are not getting updated in t-code PA20.

Hi all,
HIRE DATE & FIRE DATE are not getting updated whenever the data of an employee loaded into SAP T-Code PA20 .
And even the input data contains the both the fields HIRE DATE & FIRE DATE
Can any one please suggest us why its happening.
Thanks,
Lava.

Hi Girishkg,
The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
The limit can be set in web application’s web.config file or in IIS .
There are two detailed articles about setting the limit:
http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
Feel free to reply if the issue still exists.
Best regards
Wendy Li
TechNet Community Support

Data carrier & application field are not getting displayed in CV04N

Hi Guru's
In TCode : CV04N, data carrier & application field are not getting displayed.
While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
Let me know is there any configuration that has been missed out.
Regards
Bhanu

Hi Bhanu,
Please note that the fields 'Data carrier' & 'Application field' are visible only if no document type is entered.
Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
Regards,
Pradeepkumar Haragoldavar

Backened documents are not getting updated in Classic Scenario

Hi,
We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
Is there any business functions to be activated.

Hi Sunil,
You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
Best Regards,
Anu
Edited by: Anuradha UG on May 18, 2010 8:09 PM

Taxes are not getting updated in PO

Dear All,
I have done some changes in pricng and tax calculation procedure.
But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
Is there any other way for updating the tax calculations at invoice tab in PO.
Regards,
Rakesh

>
Rakesh Shelar wrote:
> Dear All,
>
> I have done some changes in pricng and tax calculation procedure.
>
> But for old POs the calculations are not getting updated when i sees at invoice tab in PO. To make affect the same I need to unrelease the PO, SAVE and again release the PO.
>
> Is there any other way for updating the tax calculations at invoice tab in PO.
>
> Regards,
> Rakesh
Only other way possible is abap script to be made to change Po data without changing the release. Otherwise you need to unrelease the Po's first, then change the data and then save for your changes to get affected.

Values are not getting updated in sales report

I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
regards,
thooyavan

Hi,
Please check with the Customer and Material Statistics group in the Customer and material master respectively.
Further check with the LIS settings (Sales Area combination with the Update group).
Reward points if this helps you.
Regards,
Harsh

Values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

you have encountered activation lock. Read iCloud: Activation Lock

Changes to Excel files are not getting updated

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.

Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Exchange Mails are not getting updated properly without refreshing

From couple of days, exchange mails are not getting updated properly without refreshing.
Kindly suggest.

Kindly suggest a solution

Reputation points are not getting updated..!!

Hello Community,
TITLE: Reputation Points are not getting updated.
I think the reputation points are not getting updated as I noticed that there was two likes on my comment in two different discussion but I did-not see any points increase in my profile, I am not sure if any one else is experiencing the same.!!
Regards
Kumar

Thanks Jason, probably I missed the announcement.
Regards
Kumar

Registers are not getting updated

Dear all,
I am new to CIN.
My Problem is that RG registers which need to be up dated while reciving the excisable material are not getting updated, or else i am not finding way to see them. can any one help me?
Prabhash

Hi
Refer the link
http://help.sap.com/saphelp_47x200/helpdata/en/de/8b6a158bef9844b00635a468856274/frameset.htm
Regards
Ramakrishna

Field KZWI4 is not getting updated in table EKPO

I have a case where for two scheduling agreements the pricing procedure getting determined is the same, but the field KZWI4 (subtotal 4) in table EKPO is getting updated for one SA and not for the other. The only difference in the two SAs are the tax codes. Do tax codes have any bearing on the field KZWI4 getting updated in table EKPO?
Regards,
Pratima.

Hi Pratima,
unfortunately i can only write that I am facing the same challenge at the moment. I will update the discussion as soon as I have a solution.
Best regards
Bjoern

Values not getting updated in table mvke

Hi,
I am working on a module pool program.In the o/p screen there are many records.If the user wants to change the field values of a particular record,he clicks on the checkbox besides that record and when he click on the change button,control goes to update screen.In this screen when the user changes the value of one particular field and click on the checkbox beside and then click on the execute button,the changed value of that field should get updated in that particular record in the database table.Here I want to update mvke and marc tables.
I have used FM BAPI_MATERIAL_SAVEDATA to update the database tables.
Only marc table is getting updated with changed values.mvke table is not getting updated.What would be the reason for this.
I am sending a part of my code.Please check it.
form move_mat_data .
*Header
gt_bapi_head-material = gs_output1-matnr.
gt_bapi_head-ind_sector = gs_output1-mbrsh.
gt_bapi_head-matl_type = gs_output1-mtart.
gt_bapi_head-basic_view = 'X'.
gt_bapi_head-purchase_view = 'X'.
gt_bapi_head-account_view = 'X'.
gt_bapi_head-sales_view = 'X'.
*Client
gt_bapi_client-matl_group = gs_output1-matkl.
gt_bapi_client-base_uom = gs_output1-meins.
gt_bapi_clientx-matl_group = 'X'.
gt_bapi_clientx-base_uom = 'X'.
*Plant
gt_bapi_marc1-plant = gs_output1-werks.
gt_bapi_marc1-pur_status = gs_output1-mmsta.
gt_bapi_marc1-mrp_type = gs_output1-dismm.
gt_bapi_marc1-mrp_ctrler = gs_output1-dispo.
gt_bapi_marc1-serv_level = gs_output1-zserclass.
gt_bapi_marc1-availcheck = gs_output1-mtvfp.
gt_bapi_marcx-plant = gs_output1-werks .
gt_bapi_marcx-pur_status = 'X'.
gt_bapi_marcx-mrp_type = 'X'.
gt_bapi_marcx-mrp_ctrler = 'X'.
gt_bapi_marcx-serv_level = 'X'.
gt_bapi_marcx-availcheck = 'X'.
Material Description
REFRESH gt_materialdesc.
gt_materialdesc-langu = gs_output1-spras.
gt_materialdesc-matl_desc = gs_output1-maktx.
append gt_materialdesc.
*Sales
gt_bapi_mvke1-sales_org = gs_output1-vkorg.
gt_bapi_mvke1-distr_chan = gs_output1-vtweg.
gt_bapi_mvke1-sal_status = gs_output1-vmsta.
gt_bapi_mvke1-valid_from = gs_output1-vmstd.
gt_bapi_mvkex-sales_org = 'X'.
gt_bapi_mvkex-distr_chan = 'X'.
gt_bapi_mvkex-sal_status = 'X'.
gt_bapi_mvkex-valid_from = 'X'.
endform. " move_mat_data

Hello Hema,
Find the fields which you need to populate with values:
As an example i'm trying to update DISPO from MARC and VKORG from MVKE.
No need to fill clientdata and clienddatax.
* Header data
      MOVE g_wa_mat_out-s_matnr TO g_r_headdata-material.
      MOVE 'X' TO g_r_headdata-mrp_view.
* Plant data
      MOVE g_wa_mat_out-t_werks TO: g_r_plantdata-plant,
                                    g_r_plantdatax-plant.
          MOVE g_wa_mat_out-t_dispo_new TO g_r_plantdata-mrp_ctrler.
          MOVE 'X' TO g_r_plantdatax-mrp_ctrler.
          MOVE g_wa_mat_out-t_vkorg_new TO g_r_salesdata-sales_org.
          MOVE 'X' TO g_r_salesdatax-sales_org.
Reward If Helpful.
Regards
Sasidhar Reddy Matli.
Edited by: Sasidhar Reddy Matli on Feb 7, 2008 11:49 AM

CJ20N-fields are not getting updated in table PROJ

Similar Messages

Maybe you are looking for