COOIS : Production Order Information System
Hi,
In COOIS Report at header level, Report has a column order Type. Where as in Component level report does not have order type.
Is there is any logic that order type has to be at header level not at component level.
If not then there is any report or way to get order type at component level.
Regards,
Vivek Malik
Hi Vivek,
Order type is an information at header level in the COOIS standard report.
If you need to have this information in the COOIS report at component level you can use the Badi to insert a column in the COOIS and through production order to define the following type order.
You can use this document in order to add a new field at level component.
Additional Customer Fields in COOIS output
As alternative soluction you can create a query using the following table:
AUFK-AFKO (rsnum)-RESB
I hope have been useful for you, let me know if i solved your requirement.
Daniele
Similar Messages
-
BADI in coois (production order information system
Dear SAP Guru
As per my Client requrement order report COOIS (order confirmation report) we have require Material & material decription
Coloumn in order confirmation report. We have study this will be in BADI process..
But some problem to BADi
Pls help & detail step by step BADI processHi,
1. determine the list structure you are interested in: refer to SAP note 434123 (for Confirmations: IOCONF)
2. check if this field is available in the structure already: start report RCOTX000: actually field IOCONF-MATNR is active in the standard and also displayed in the layout change for Confirmations list. If it is not active you can activate it, but there is no guarantee that the field is always filled
3. if the field is not available in the structure, use transaction SE11 and create the append structure and include your field in this structure
4. implement BADI WORKORDER_INFOSYSTEM in SE19 and fill your field in the corresponding BADI method.
Regards,
Sankaran -
Production order information system
Hi All,
We use the standard production order information system COOIS t-code.
There is a option to include/exclude system statuses in the selection. But this is restricted to two options. Can this field be increased to higher number to have more filtered report?
Another question is can we set a selection profile to do the above?
For example we want to exclude status TECO,DLV,CLSD. If it can be done then please gude how to do.
Thanks,
Srijit.Hi pp_srijit,
In initial screen of order information please choose in sys. status CLSD and DLV both excluded. Execute the report. in the report choose column system status and execute the filter. Choose multiple selection,then choose select ranges. Go to the upper limit and take the F4 help, arrange the status in decreasing order. Choose the first TECO status and copy it for the upper limit and the last TECO status for the lower limit, execute. In the next box choose selection option icon, choose outside range and execute. You will get all the orders without CLSD, DLV or TECO status. You may also save the selection as a variant
Regards
Sm. -
User Exit For production Order Information System
Dear All,
I am looking for an User Exit,BADi's for production order Information System where i can see the Quantity which is already produced & The Quantity which is already passed from Quality.I mean the GR Quantity against the Production Order and against that Quantity how much is passed from the Quality.
This is an Urgent Requirement from The Customer.
Please Help.
Thanks
Sujay JoshiDear
You use QA33 report with following fields,,,,here you will get all required
Inspection lot
Material
Plant
Insp. lot quantity
Base unit of measure
System status
Order
Unrestrictd-use stck
Scrap quantity
Sample
Blocked stock
Reserves
New material
MatTransfer posting
Posted to batch
Return to vendor
Other quantity
Other quantity 2
Quantity to be posted
Long-term sample qty
Inspected quantity
Destroyed quantity
Actual lot quantity
Defect. qty in IQty -
Hi Experts,
In the selection screeen of Order Information system - COOIS we have filtering options like 1.Lists 2.Profile 3.Layout.
We have some standfard lists defined in the system. Where we can find these details ?
Is it advisable to do any modification. i.e if i need to add new element can we be abl;e to do the same ?
Regards
ValavanHi Valavan
Go to SPRO-shop floor ctrl-information system-define profile for order info system
Here u will find all the objects with the profiles attached for each objects under the Standard profile
Also the same can be viewed in COOIS itself Select object overview in the list and the standard profile in the profile, u will get object selection tab in the bottom, here u will get all the details.
No it is not advisable to modify this existing lists.
Hope u r clear now
Regards
Vijay -
COMAC - COHV: manage object profile for order information system
Hi,
when you carry out an collective availability check from transaction COHV or COMAC, it is possible to select a layout or a profile. The layout can be defined within the transaction.
What about the profile ? I can't find how to create a new profile in the customizing for order information system.
In standard the profiles are:
000001 standard profile
000002 pick list
000003 collective availability check
000004 documented goods movements
Do you have any idea where the profiles can be maintained ?
Many thanks
RegardsHi,
Go to SPRO > Production >Shop Floor Control > Information System>Define Profile for Order Information System.
Hope this helps
Regards
Ali -
Process Order information system
Dear All,
Iam checking the order information system for process orders ie COOISPI. I dont find the field resorce network in the layout. I would like to know how to add this additional field to the layout.
Regards
PrathibDear Prathib,
Check whether this SAP notes can help you, 363327.
Also check this link,
[SFC Report|Re: COOIS - hidden fields for operations for refered task's]
Regards
Mangalraj.S -
NB Type Planned orders are not Displayed in the Order Information System
Dear All
We have one material with Proc. type F.
We have entered a sales order for that item & run MRP ( MRP type PE)
No strategy is assigned to the material.
MRP has created a Plan Order which is of NB type & in MD04 it is showing SDEB against Plan Order.
Now we are not able to see this Plan Order in COOIS.
Although it is visible in MD04,MD16.
Can anyone tell me whether COOIS consider only those plan orders which are of E ( In house Prod ) category ?
How can we display that in COOIS ?
Abhishek GargDear,
COOIS is used for production orders or planned orders olny and it will show u Order information relevent to "E" type procurement.
You can use ME5A -
Production order-Project system
Hi
How can planned order can be converted into production order in project system
Regards
SureshHi
With manual selection the system lists all the valid task lists that exist for the material at the time of copying and that should be selected according to the selection ID. You can select the required routing from this list.
Working Without a Routing
When you work without a routing the system automatically generates an operation. It proceeds as follows:
If default values have been maintained for the automatic generation of an operation the system uses these values to generate an operation automatically in the order.
If no default values are specified in Customizing the system generates an operation with the control key 0001 and the operation number 0010.
<b>If a routing must be selected but no routing can be selected then the system reacts with a termination message and you must carry out order creation again.</b>
Further information please refer the link
http://help.sap.com/saphelp_47x200/helpdata/en/b1/c04182439a11d189410000e829fbbd/frameset.htm
Regards
Ramakrishna -
Disply of Serial Number in Production Order info System
Dear Guru,
I want to see production order along with serial number in COOIS. Please guide me.I am using ECC-600.
Regards,
Sanjay SahooHi,
Please check in the CO26 transaction enter the plant and execute then in the filed selection tab select the serial number filed.But unable to retrive the serial number of components.
Or
U can get it on reverse way like
Go to serial number change mode through IQ02 transaction double click on the serial number then click it on the history button the it will shows the serial number created against production order.
Or
U have to do some developments.
Regards
Vijay -
Production Order Report - System Query
The Production Order Report in v2005A SP01 is not implemented in v2007A.
This report is important to some of our B1 user customers.
If the 2005A report is copied and pasted into the Query Generator in 2007A, it appears to work correctly, but the risk is that:-
(a) table changes which have been made have effects which aren't apparent on normal inspection, and
(b) it will eventually be lost during upgrades and users will have to recreate it themselves, for which many don't have the expertise.
Please verify that the functionality of the 2005A query remains correct in 2007A, and reinstate it as a system query in a future release.
Regards,
Mike BurmeisterHi,
In SAP B1 2007A SP01 PL10, there is a change log. You can check all the differences made by user in the pass in the change log.
the table is AWOR. The product no. is taken from OITM. You can use both table in order to find out the comparison
JimM -
Production Order Operations System Status
Hello Friends,
I want to include Production order operations status in customized report. Can you pls suggest me how to fetch Operations status since I am unable to find the same from any of the Production Order Operation table (AFVC, AFRU, AFVU, AFRH etc) Also JEST, TJ02 tables provide Prod Order header level status. I want to fetch Operation level status.
Hope to have your valuable inputs for the same.
Thanks & Regards,
TejasDear Mr Brahmankar & Mr Vivek,
Thanks for your answers.
I am working with the ways you suggested.
In case any issue will ask to you.
I really appreciate your timely help.
Regards,
Tejas -
Order information system ( COOIS): Overall Profile
I am using tcode COOIS and using
List = Object overview
Overall Profile = Standard profile
I want to define my own Object profile for say Confirmation and Components and attach it the standard profile. I am able to define a custom Overall profile but not able to define a custom Object profile. Is there a way to do it.
thanks a lotUsing COIS tranasction you can create Custom Overall Profile and Custom Object profile in that.
Once you create the Custom overall profile, open the details of the profile,
within which you will have profile for objects. Here you can define object profiles, select the fields you want to display or hide basing on your requirment.
Hope this will help you. -
Standard report for production order
Dear all
Is there any standard report with reference to material for all procuction orders ie open,closed etcHi,
COOIS - Production order information system
For Open Prod orders
Enter material number and sys. status CNF tick Excl.
For Closed Prod orders
Enter material number and sys. status CNF, DLV.
Regards,
Sankaran -
Report on production order status and shortage report
I want to know standard report on production order status and shortage report. Kindly suggest.
COOIS - Production order information system . In this report you can give system status in selection screen and in report you can get complete status details (both system and user status) .
shortage report - CO24
Maybe you are looking for
-
Deleteing exact duplicates more than one at a time?
I am able to pull up exact duplicates but am I only supposed to delete the extras or all on the list? Is there a way to delete all at once or do I have to do it one by one?
-
Why isn't my ipod and iphone not connecting to my new laptop on my itunes that i have downloaded
I do not understand why my ipod and iphone not connecting to my new laptop that I got for Christmas. It did for a while and now its not. My itunes is up to date and so is my phone and ipod. Why isn't my itunes finding/syncing my ipod and iphone?!
-
Datasource does not appear on the console, intermittent problem
I am using Weblogic 9.2 MP3 I've created an Oracle DataSource and successfully targeted it to a Managed Server. When I click on it in the console and navigate to the "Monitoring" tab, it would sometimes appear in the "Test DataSource" table and somet
-
What is the best way to transfer 1200 songs from one SGIII to another SGIII?
I have over 1200 songs on my Samsung Galaxy III and want to transfer them all in one block to my husband's SG III. I have Backup Assistant Plus with most of the music uploaded there. I asked at our local Verizon store but no one there knew how to u
-
Possibility of message notification without always visible tray
greetings readers, i moved to openbox WM after using gnome for some time. i love the fact that i can undecorate applications and gain more usable screen real estate. i realized how unnecessary the top and bottom panels in gnome were ... until i start