Cost Center Error in Shopping cart Multi Line items

Hi,
We are working on SRM 4.0. when the user is trying to create a shopping cart from catalog he gets the error message as
"you don't have the acces to the cost object xyz12.please return to the cost assignment section and correct".
We have given the access to that cost center in SRM even also he is getting the same error.
He does not have any problem with single line item against the same cost center. problem gets only when he is going to create with multiple line items in shopping cart against the same cost center.
Request all please advise me where i need to check to overcome the issue.
Regards,
Sri

Hi,
Thanks for your kind response. can you please elaborate bit more step by step.
Awaiting for your feedback.
Regards,
sri

Similar Messages

To get cost center of the shopping cart

Hi Experts,
I need to fetch cost center details of a shopping cart making an RFC Call to SRM function module in ECC.
Initially I Planned to make an RFC call to BBP_PD_SC_GETDETAIL in ECC. But the result table of BBP_PD_SC_GETDETAIL is referring to a structure which is not present in ECC and it is difficult to create a custom structure like that as it involves creation of many data elements as well.
Please help me out.
Thanks in advance.

Then you can try some thing like
1. Create a Wrapper Function module , and inside that you call the FM BBP_PD_SC_GETDETAIL and KOSTL is a dataelemnt that will be even in the ECC too...
2. Don't try to import the enitre table entries into ECC if not needed, only createa costcenter export parameter in the SRM wrapper FM and..
3. Define this wrapper Fm as RFC then call this FM from ECC, by using the addition DESTINATION of the call function statement.

Gouping of Shopping Cart's line Items

Hi,
I want to group the following SCs for the local PO.
SC # 1 , LI # 1, G/L account number 12345
SC # 1 , LI # 2, G/L account number 12345
SC # 1 , LI # 3, G/L account number 78901
SC # 1 , LI # 4, G/L account number 78901
SC# 1, LI # 1 and 2 to PO # 1
SC# 1, LI # 3 and 4 to PO # 2
How do I do it ?
Thanks
Pranav

Hi Pranav
Check this Badi
BBP_GROUP_LOCAL_PO in SRM
report BBP_SC_TRANSFER_GROUPED
regards
Muthu

Runtime error in kob5, kob1 and line items display in Cost Analysis in ko03

Hello everyone,
I would like to ask for your expert advice on a situation we need to have a solution. Let me tell you what happened.
In ko88, we tried to settle an internal order to a final asset using 'partial capitalization'. We encountered an error 'Settlement amount is greated than available amount'. I checked in kob5 and we have two line items: 90,000 and 30,000. Both have to be settled to three different final assets namely asset 1, asset 2 and asset 3. The settlement rule was as follows at first:
Line 1: 90,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
Line 2: 30,000 to be settled to asset 1, asset 2 and asset 3 at 65,000; 40,000 and 15,000, respectively.
Due to the error, we changed the settlement rule following these directions:
1. Remove the settlement rules that we had so we can start anew.
2. Choose the first line item and click on "Final Settlement".
3. Enter the necessary settlement details (total should equal to 90,000 only).
4. Go back and save.
5. Choose the second line item and click on "Final Settlement".
6. Enter the necessary settlement details (total should equal to 30,000).
7. Go back and save.
8. Then, check again the distribution rules set.
Everything was saved and done correctly. So, we tried to do ko88 this time. But, the previous error 'Settlement amount is greated than available amount' still occured.
I went back to kob5 and when I ran it, a runtime error occured. I went to see the actual line items in kob1, and I encountered the same runtime error. I went to see in ko03>cost analysis>the actual debit line items, and I encountered the same runtime error. Were my actual line items lost? How do I retrieve them?
Thanks in advance.
Best regards,
Peter

hi,
check in SAP OSS with the message number you get is there any SAP Notes tobe applied.

BAPI_ACC_DOCUMENT_POST : getting cost center error

Hi guys,
regarding GL posting, I am using the BAPI_ACC_DOCUMENT_POST.
I am uploading file with so many fields. I am able to upload properly.
But, I am getting error only with cost center.
error: "Cost center 512401 does not exist on 2009/07/31. "
actually, cost center exists and functional consultant showed me and he uploaded the record manually.
when i post manually using FB01 t code, I am able upload correctly.
I tried to debug, but it is taking more than 2 hours, as it is standard BAPI.
Please help me if any body come across this situation.

Hi ,
please check this thread will provide you some insight on the BAPi.
LINK:[Thread1|HOW TO PROGRAM THE ERRORS IN POSTING A DOCU USING BAPI_ACC_DCOCUMENT_POST;.
Link:[Thread2|https://wiki.sdn.sap.com/wiki/display/ABAP/TransferMROrelatedGLBalances]
Hope your query resolves quickly.
Have a best day ahead.

Shopping cart status I111 - Item in transfer Process

Hello Experts,
I have one issue in which enduser had created a shopping cart and now its approved but no follow on document is generated.
I checked in the application monitor : I saw the item status is "Item is in Transfer in Process'.
When i run the report BBP_ALERT_SB_NOTTRANSFERED. now the status changes from I111 to I1112. "error in transmission'.
Please guide me how i can repost the document so that follow on document will get generated.
I am in ECS scenario with SRM 7.0
Help will be appriciated.
Thanks
Smriti

HI Masa and the experts.
I have checked the BBP_PD for the Shopping cart and the Item data.
My finding are :
BE_LOG_SYSTEM : VLBSRP300 " This is my SRM - SRP(Production) System and the client
BE_OBJECT_TYPE : BUS2201 " Again this is the PO business object
BE_OBEJCT_ITEM : Blank
BE_OBJEC_ID : 1 "
But there is no PO created .
When i ran the report BBP_ALERT_SB_NOTTRANSFERED. then my Shopping cart status changed from I1111 to I1112.
Now please let me know how i can process my shopping cart to create follow-on documents,
Smriti

Profit Center is not updating in Vendor line item

Hi Experts,
For my GL postings in F-43, F-41, F-53 ,F-54 and F-28 the 1st line item corressponds to Vendor or Customer, the profit center is not updaitng the values and shows nill. We have given check in Exit and Substitution but its not updating in BSEG structure as its functioning like loop.
Pls advise, how to resolve it.
thanks & reagrds
sankar.

Hi Bharathi,
thanks for your prompt reply.
But as per my Client requirement, we need to pass the profit center values to the vendor/customer line items also.In such case, what' s the solution?
Pls advise.
regards
Sankar/Brahma

In COGI error text "Multiple assignment of line item"

Hi Guru,
In COGI error text "Multiple assignment of line item"
Description:
ultiple assignment of a line ID
   Message no. M7357
iagnosis
   An item table, in which the line ID (LINE_ID)
   was transferred to the function module MB_CRE
ystem Response
   Processing is terminated.
rocedure
   Contact the system administration.
rocedure for System Administration
   There is an error in the calling application.
Please help me to resolved this issue.
Thanks and regards
PNU

Hi,
Thanks for reply,
It is possible to remove material from COGI list. We need to stop creation of this error.
Is there other solution to control creation of error "Multiple assignment of line item"
Thanx & regd.
PNU

Multi line items in mail

Hi All,
In my scenario sales order created in R3 side and send mail from XI side.
Every thing is working fine. But the issue is in case multi line items in the sales order, the mail showing only one line item.
Please help me on this scenario, and send me some documents for go through and try.
Thanks.
Senthil kumar V.

1 We can send an e-mail with multi-line content using E-Mail Adapter.
2. We can set Dynamic Data as the e-mail content.
3. The Dynamic Content has to be formatted either in Mapping or in Module and then sent to E-mail Adapter. E-Mail Adapter cannot do the formatting.
4. Content can be of any number of lines.
5. The consolidation should be done in Mapping or in a Module program and the consolidated data should be given to the adapter.
6. Yes Content can also be set in HTML format
Edited by: Dharamveer Gaur on Sep 18, 2008 7:15 AM

Create Limit Shopping Cart from Catalog Item

Hi,
Can i create limit shopping cart for catalog item (External catalogs)
Thx,
jai

Hello,
For your specific achievment, you can use the following OCI parameter NEW_ITEM-CUST_FIELD to bring some additional data from external catalog (details which is related to limit) and modify the DOC_CHECK_BADI accordingly(to mix the catalog and limit SC type)
Velrajan.S

Approval of Shopping cart with limit items

Hi All,
We are using n-step item level approval (BADI) for shopping cart approval.
The approval process is working fine but when i create a shopping cart with limit items, the shopping cart goes withous approval.
The approval process is also working fine if i am including 1 limit item and one normal item.
Please let me know why is approval process not working for shopping carts with only limit items.
Regards,
Gaurav

Hello,
approving a shopping card without any workflow
is impossible in the Standard SRM case.
As there is no workflowlog anymore , it was deleted somehow. Please
ceck if you got processes where the workflow will be archived or deleted
after a while.
The question in my point of view is, why was there a workflow
without any approval steps ?
As i can see you are using only the workflow ws14500015 which
is a badi workflow. So the behaviour is controlled from your
badi,as all approvers come from the BADI.
If there is a automatic approving then the BADI brings not back
any approver and the setrelease method of the workflow is triggered
then immetiately to set the status to "released" = "approved".
To Do:
Check your BADI for Shopping Cards like the example one mentioned above.
Make sure that the workflow logs persist in the system for analysing
the processes and to get the correct approval preview.
regards,
Gaurav

Shopping Cart with Service Item (SRM 7.02) - not created successfully

Hi Experts,
We have a requirement to create a Shopping Cart with Service Item (SRM 7.02) from PR Data coming from ECC via standard Proxy (PurchaseRequestERPSourcingRequest_In). But we are not able to create the SC with Service Items, though we are successfully able to create SC for Material Items successfully.
Please suggest, what can be the additional parameters to be passed in order to create a SC with Service Items in SRM 7.02.
Thanks in advance.
Regards,
Gaurav Gupta.

Hi Gaurav,
Thanks for your response, but we have standlone scenario( No ECC), we have the Service Hierarchy, Category and Product all setup for Service, yet the system is not creating the SC with Service Item via PR Data Coming in to SRM System.
Also, we tried the same directly from SRM system using describe what you need, and their as well the SC goes with Service category but when SC details are shown up it shows as Outline Item, where again we need to add subline using service category. Ideally i suppose it should take the Service Category which we added at the time of filling details in Describe what you need.
Please suggest, where in my main concern was in standalone SRM system if we have material PR data, then apart from the Category to be used Service is their any other parameter to be passed in, to create SC with Service Item.
Regards,
Gaurav

Cost center Error in SRM

Hi,
We are working on SRM 4.0. when the user is trying to create a shopping cart from catalog he gets the error message as
"you don't have the acces to the cost object xyz12.please return to the cost assignment section and correct".
We have given the access to that cost center in SRM even also he is getting the same error.
He does not have any problem with single line item against the same cost center. problem gets only when he is going to create with multiple line items in shopping cart against the same cost center.
Request you to please advise me where i need to check to overcome the issue.
Regards,
Sri

Hi Sri,
Is this the exact error you are receiving, it does not seem familiar? Is this a customer message in yor system?
Regards,
Jason

Receiving Error in Shopping Cart : Order Does not exist

Hi
While creating Shopping Cart and click Insert From Clipboard button, I am receiving " Order xxxx does not exist (Item yyy ).
Please tell me why I receive this error and what causes and possible fixes to this?
Details:
The scenario I am doing is I have a webdynpro ABAP application which copies Value, Cost Center, OR Cost objects in to Clipboard.
now when I go to Shopping card - > descrive requirment -> Cost assignment section-click Insert From ClipBoard - throws below error: "Order xxxxxx does not exist (Item yyyy)"
Indeed OR cost objects which are valid in the SRM system and every OR line is seen as invalid by SAP with above error message. Please explain
Thanks
Praveen
Edited by: Praveen kumar Kadi on Jun 21, 2011 9:16 AM

Hi,
Thnaks for your reply.
Actually manual copy To clipboard works fine from Shopping Cart. when we use webdynpro application to copt to Cliboard with same data it doesn't work. So I believe the key to debug SRM Shopping Cart-> CopyToClipBoard functionality like how the values have been copied to from shopping cart. So that we can compare Shopping Cart->CopyToClipboard value with Webdynpro CopyToClipBoard values.
How to find what and which values and in which format copied from shopping Cart-CopyToCliboard.? Anyway to see this in debug.
Please help with some screenshots/debug screens.
thanks
Praveen

Object: Error on Shopping Cart creation (BBPSC02)

Hi all,
While adding an item to a Shopping Cart, the following error is occurring:
Error when processing your request
What has happened?
The URL https://srm.test.corp:8005/sap/bc/gui/sap/its/bbpsc02/~flNUQVRFPTIwMzA1LjAwNC4wMy4wMQ== was not called due to an error.
Note
The following error text was processed in the system EST : Template interpretation failed. Template does not exist.
The error occurred on the application server sapsrmt_EST_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: B40B_ACCSERV_CHECKACCASSIGNMT of program SAPLBBP_BD_DRIVER_40B
Function: META_ACCSERV_CHECKACCASSIG_BUF of program SAPLBBP_BD_META_BAPIS
Function: META_ACCSERV_CHECKACCASSIGNMT of program SAPLBBP_BD_META_BAPIS
Form: COBL_CHECK of program SAPLBBP_PDACC
Form: ACCOUNT_CHECK_SINGLE of program SAPLBBP_PDACC
Form: ACCOUNT_MAINTAIN_SINGLE of program SAPLBBP_PDACC
Form: ACCOUNT_F_CREATE of program SAPLBBP_PDACC
Function: BBP_ACCOUNT_CREATE of program SAPLBBP_PDACC
Form: ITEM_F_CREATE_FROM_WTAB of program SAPLBBP_PDIAD
Form: ITEMLIST_F_UPDATE of program SAPLBBP_PDIAD
Going into the ST22, as Error Analysis it is suggested:
As a test, you can set the service parameter ~generateDynpro = 1. The system then generates the HTML page for this service without a template. You can then at least see which screen was sent by the WebAs. Make sure to reset the parameter to its original value.
Adding this parameter, the transaction is working properly, but is asking User ID and password to connect to the back-end (that seems strange to me!).
A similar error (with different functions involved) is occurring while clicking on Settings: user settings are not visualized, but also changing the service parameter ~generateDynpro = 1, the transaction is working.
Any idea on where is the problem?
Thanks in Advance,
#Bill J.

Hi Luciano,
these are the information coming from ST22 about the dump:
Information on where terminated
Termination occurred in the ABAP program "SAPLBBP_BD_DRIVER_40B" - in "B40B_ACCSERV_CHECKACCASSIGNMT".
The main program was "SAPLBBP_SC_UI_ITS ".
In the source code you have the termination point in line 181 of the (Include) program "LBBP_BD_DRIVER_40BU34".
Source code extract
164 IMPORTING
165 expcobl = e_backend_cobl[]
166 messages = return40b[].
167 IF e_backend_cobl[] IS NOT INITIAL.
168 REFRESH lt_backend_cobl.
169 lt_backend_cobl[] = e_backend_cobl[].
170 lv_change_in_badi = gc_yes.
171 ELSE.
172 IF lv_change_in_badi = gc_yes.
173 e_backend_cobl[] = lt_backend_cobl[].
174 ENDIF.
175 ENDIF.
176 ENDIF.
177 ENDDO.
178 ENDIF.
179 IF lv_change_in_badi = gc_no.
180
>>>> CALL FUNCTION 'BBP4X_CODINGBLOCK_CHECK'
182 DESTINATION destination
183 TABLES
184 bbpcobl = i_backend_cobl
185 expcobl = e_backend_cobl "note 202684
186 return = return40b
187 EXCEPTIONS
188 communication_failure = 1 MESSAGE msg_text
189 system_failure = 2 MESSAGE msg_text
190 OTHERS = 3.
191
192 IF NOT sy-subrc IS INITIAL.
193 CALL FUNCTION 'CONTROL_RECORD_ADD_VALUE'
Any suggestion on how to debug are welcome.
Thanks
#Bill J.

Cost Center Error in Shopping cart Multi Line items

Similar Messages

Maybe you are looking for