Create Stop and Start Table item using HTMLDB_ITEM - APEX 2.2.0

Hi, all,
I guess the subject says it all. How can I create a Stop and Start Table item using HTMLDB_ITEM? I think I can just output "< /table >< table>", but I'd like to use the built-in function if there is one, in case the way tables are rendered were to change, or in case my thinking is wrong, which is always possible ; - )
Thanks, for this and for all of your help!

Don, there is no function provided for this.

Similar Messages

  • How to stop and start Managed Server using weblogicServer

    We are new.
    We have 2 managed servers and an Admin Server.
    We're trying to use the command line to stop/start our Managed Server.
    Could someone share examples on how one could write the command line that's similar to the WLS console Server Start tab ?
    We have a couple of classpaths and a bunch a arguments;
    When we tried to start one of the managed server it defaults to use some other settings as opposed to the ones in Server Start tab.
    What did we do wrong ?

    Follow the below links,each n every links have various methods and example for starting and stopping of Weblogic services
    We have 2 managed servers and an Admin Server.
    We're trying to use the command line to stop/start our Managed Server.
    We have a couple of classpaths and a bunch a arguments;

  • HT203177 I had to get a new hard drive in my 27 in IMac. I used time machine to get everything back on my computer. I just turn on time machine and its says it's preparing over 800,000 items to back-up, it never back-up, it stop and starts the process ove

    I had to get a new hard drive in my 27 in IMac. I used time machine to get everything back on my computer. I just turn on time machine and its says it's preparing over 800,000 items to back-up, it never back-up, it stop and starts the process over again.

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    Then repair the backup/TM drive.

  • APEX 4.2 aligning issue of Stop and Start Grid Layout item

    My APEX application application is in the process of moving from 4.0 to 4.2.  I am experiencing an issue with aligning (left margin justified) of Stop and Start Grid Layout items that have a border around them.  Earlier I had an issue with the border itself not showing up in the 4.2 application.  I was able to resolve that with a workaround by adding inline code in the CSS section of the page: #P23_OFFICE_START_TBL {width:682; border:1px solid #369; margin:5px;}. This created the border which I needed, but there are 2 Stop and Start Grid Layout items that are indented and not aligning with the border of the previous line.  I have tried a number of different things but none of them have worked.  This seems like a very simple issue to fix but I am having a tough time resolving it.
    I tried to put the item in question in a different grid, which corrected the indention but then I lost the border around the item.  It seems that the above CSS code does not work on the new grid.  I also tried to put attributes such as margin-left:5px; float: left; clear: left; float: left, in the CSS code but that did not work, too.
    Any suggestions?
    Ajay K

    I deleted and added back the Stop and Start Grid Layout items not aligning properly.  This worked.  Apparently, the 4.0 to 4.2 upgrade did not handle/convert these items properly.  Deleting and adding them back resolved the issue.

  • Task created to stop and start Health service not working.

    We have multiple servers being grayed out so we created a task to stop and start the health service on SCOM 2007 R2. We have created two tasks one to stop and another task to start. The STOP task works but the START tasks keeps running but there is no result
    as well as when i check in Services.msc it is still stopped. Below are the screen shots .
    Task created to STOP the health service which is running.
    Screen shot of service start task creation which is NOT working
    The same was created for another service windows audio. Which worked for both stop and stop (Created separate tasks).
    We also tried the recycle health service and chche which is also failing.
    Can any one please help. The issue is on both SCOM 2007R2 and 2012 R2 both. Is there any other way to touch the health service.
    We are facing the issue only with Healthservice.

    Hi All,
    Thank you for all your answers.
    @ dktoa -
    You are right we have to concentrate on the servers to determine why do they go grey (all in one site). But before we do that i felt i find a temporary solution. Then go deep investigation to solve the issue.
    @Yan LI: As per the likn provided above you. I overrided the servers but still the health services were not starting or restarting. When i created a custom group and added the servers to that  group in that site and then  enabled the override on Restart
    Health Service for a specific group and pointed towards that group then it worked.
    Thanks All.


    I have built a simple JSP page. I want to call my workflow program from this page.
    How should I use the CREATE PROCESS() AND START PROCESS() inside the JSP page?
    Also I want to get the value entered in the text field (which will be a hidden field) to be passed to the ITEM_ATTRIBUTE, which I have defined in my program. How can this be achieved?
    Please give me the syntax for this.
    Please find below the JSP page
    <%@page import= "java.util.Date" %>
    <script language="javascript" src="ibeCButton.js"> </script>
    <title>First Page</title>
    <H3>Today is:
    <%= new java.util.Date() %>
    <INPUT TYPE="text" NAME="CART_ID">
    <INPUT TYPE="submit" onclick = >
    To use LAUNCHPROCESS in JSP, the following is the syntax.
    public static boolean launchProcess
    (WFContext wCtx,
    String itemType,
    String itemKey,
    String process,
    String userKey,
    String owner)
    Should WFContext have the connection information of the DB.
    If I pass only the WFContext and itemType attributes are they enough? Please let me know.

    There are two options.
    1. Good one.
    Include wf*.jar files in your system CLASSPATH. Use class to access engine APIs. You would need to pass WFContext for which you need WFDB.
    You basically created WFDB with username, password and connect string. Pass it to WFContext and use it for all Workflow Engine APIs.
    2. OK one.
    You can get JDBC connection using the default mechanism that your custom Java and JSP code could be using. Call the PLSQL procedures WF_ENGINE.CreateProcess and WF_ENGINE.LaunchProcess over JDBC.
    Anyways option 1 makes life easier.

  • Why does the video stop and start using airplay on Mountain Lion?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

  • When I watch youtube videos, it always stop and start. Very  annoying. Any good apps that we can use.

    YouTube videos always stop and start . Is there an apps that we can download to stabilize the video.

    Are you trying to watch YouTube from a web browser on iPad or from the YouTube app?
    Should be running fine from the YouTube app on the iPad unless you have a slow connection.
    Our family uses DSL (4-5 Mbps) and we stream video both with iPads, computers and TV with,mostly, no issues like buffering or data degradation/pixellation. It all depends on how much traffic there is on the Internet at any one specific time.
    Heavy Internet traffic on different days at different hours of the day, from your ISP, can also be a factor in slowing down your Internet connection.

  • Stops and starts in video streaming from iphone to tv using apple tv and airplay.Both devices have latest software and are capable.

    When try to stream content (specifically, videos from to my TV through my apple TV from my iphone 5,The video  freezes, stops and starts continually, even though it is playing smoothly on the screen of my iphone.  both iphone, Apple TV  are capable models and have latest software updates.
    What's wrong here?

    Not necessarily, but right now you don't have a stable network and there are a lot of factors that can compromise that. I didn't say ethernet was the only option, again you can get a report of your network to see the status.  Would have to change things in order to strengthen the wifi signal (i.e. router location, channel,placement of ATV etc). I am running on wireless without issue, same as most users, and if you took it to a controlled environment (like Apple) you would see similar results.

  • Every video or podcast stops and starts every second

    Any help would be appreiciated, using Chrome, Windows XP Pro with SP3, Pentium 4 2.4GHz, with 2GB Ram, with Nvidia Gforce 5200 video card! Too old a system??

    hi, all three are pretty much the same, and its not a buffering issue. I hav Verizon Fios and had a WUGNET speed test show download speed being 11.3 Mbps and upload of 1.24. It was possible the Html was slightly better but not by much.
    Date: Thu, 25 Oct 2012 15:22:01 -0600
    From: [email protected]
    To: [email protected]
    Subject: Every video or podcast stops and starts every second
        Re: Every video or podcast stops and starts every second
        created by Chris Campbell in Using Flash Player - View the full discussion
    That should be fine for system specs.  My first guess would be network bandwidth issues.  Does it seem like the video/audio buffers fast enough or does the buffer continue to run out when the item is played? Try these two links out, do either of them play better? HTML5 videoNon-HTML5 video Thanks,Chris
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
         To unsubscribe from this thread, please visit the message page at In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Using Flash Player by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to

  • How may I automatically stop and start Mail services at a set time please

    Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
    Cheers, David ( a realy newbie when it comes to administering OS X server)

    launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
    So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "
    <plist version="1.0">
    and /Library/LaunchDaemons/local.postfix.start.plist:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "
    <plist version="1.0">
    You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
    I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

  • Burned DVD issues in DVD player not reading or music issues stop and start

    I'm a PC converted to a MAC (less than a month) and love it so far. I have been able to create and burn a DVD. The problem I'm having is one DVD player will not read the DVD (Hitachi). The other DVD player will play it, but the music stops and starts when it transitions (twirl) to another picture (Panasonic DVD/VHS combo). I'm using a DVD R Memorex. Neither one of the player are new. Would love to use this to make the Grandparent's a DVD of the grandchildren from birth to present as Christmas present. What do I need to use or do to be able to watch on any DVD player as well as the computers?
    Message was edited by: me01

    Hi me01
    Welcome to apple discussions. Try using 99 photos / less to avoid issues with audio fades / drops. Also do a search for Memorex on this forum and you'll see it's not the first choice of dvd's for most users. Instead try Verbatim, Maxell, or Taiyo Yuden and burn at 4x from a disc image for best results. Wish you luck and feel free to post back with results or any further questions.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

  • Srvctl on does not stop and start listeners

    I recently installed the Grid software under the "grid" user on RH5. Clusterware and ASM run under GRID_HOME, the single instance database runs under ORACLE_HOME. I have created 2 listeners on non-default ports (manually using entried in listener.ora) and then added to srvctl (srvctl add listerner -l LISTENER_XPT -o /app/oracle/product/dhome_1 -p "TCP:1523" -- in ORACLE_HOME.
    When stopping the listener using:
    [email protected]#####>srvctl stop listener -l LISTENER_XPT -- note starting with oracle user in ORACLE_HOME. Below is from "/app/grid/product/11.2.0/grid/log/server_name/agent/ohasd/oraagent_grid/oraagent_grid.log
    2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:) TNS-00511: No listener
    2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:) Linux Error: 111: Connection refused
    2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check] (:CLSN00010:)Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1523)))
    2012-06-12 12:48:00.549: [ora.LISTENER_XPT.lsnr][1125030208] {0:0:1233} [check]
    **********FROM TAILING THE listener LOG ****************************
    TNS-01190: The user is not authorized to execute the requested listener command
    12-JUN-2012 12:44:12 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
    TNS-01195: Listener rejected registration of endpoint "(ADDRESS=(PROTOCOL=TCP)(HOST="
    12-JUN-2012 12:50:02 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
    TNS-01190: The user is not authorized to execute the requested listener command
    12-JUN-2012 15:12:58 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=v01orarac01w)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_ADMIN)(VERSION=186647296)) * status * 0
    12-JUN-2012 15:12:58 * version * 0
    12-JUN-2012 15:12:58 * service_register * LsnrAgt * 1195
    TNS-01195: Listener rejected registration of endpoint "(ADDRESS=(PROTOCOL=TCP)(HOST=********)(PORT=1524)(IP=FIRST))"
    12-JUN-2012 15:12:59 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=********)(USER=grid))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER_XPT)(VERSION=186647296)) * status * 0
    12-JUN-2012 15:13:05 * (CONNECT_DATA=(SID=PRDRAC01)(CID=(PROGRAM=perl)(HOST=********)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=*******)(PORT=41398)) * establish * PRDRAC01 * 0
    Why wouldnt the Oracle user not be able to start/stop a resource from ORACLE_HOME ? Any assistance would be helpful

    I just removed the listener out of the ORACLE_HOME and added it using srvctl to the GRID_HOME. Now I am able to stop and start.
    Still the question, why cant oracle user start an oracle_home managed resource. But the oracle user could start and stop using lsnrctl stop/start
    Below if the results from ps (note I just started listener from GRID_HOME):
    [email protected]:+ASM>ps -ef |grep lsnr
    grid 9114 1 0 09:40 ? 00:00:00 /app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER_ADMIN -inherit
    grid 10348 1 0 Jun12 ? 00:00:00 /app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
    grid 20234 21990 0 09:49 pts/2 00:00:00 grep lsnr
    oracle 29926 1 0 Jun12 ? 00:00:00 /app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr LISTENER_XPT -inherit

  • SSRS Report queries begin running slowly, have to stop and start report server to restore performance

    We have had a production issue crop up twice now where reports begin running slowly seemingly at random.  
    When this happens we can see from running SQL Profiler that the report queries are taking an extremely long time to execute.  The same queries when run directly in management studio run quickly.  
    Initially I suspected parameter sniffing, and tried using OPTION (RECOMPILE) in the reports, as well as clearing out the particular query from the plan cache and running the SQL in SSMS to try and get a better plan etc but no amount of jiggery pokery by
    me could get the queries to run any faster.
    The really weird thing - is that stopping and starting the report server via the reporting services configuration manager instantly cures the problem.  
    I'd really love to know - why this might be?  Is it something to do with the report server closing and re-opening its connections to the database? That's the only sort of thing I can think of...any ideas? Anyone? Any suggestions would be much appreciated.

    Hi LucasF,
    In your scenario, usually we can monitor the execution log in Report Database. If you run below query, you can get the results how long the report takes to render (TimeRendering), how long to process the report(TimeProcessing) and how long to retrieve data
    from Database(TimeData). You can check the starttime and endtime to know the total time for executing a report.
    SELECT TOP1000 *FROM[ReportServer].[dbo].[ExecutionLog2]
    More details information, please reference to similar thread below:
    Steps for troubleshooting a slow SSRS 2014 server
    Troubleshooting Reports: Report Performance
    In SQL Server Reporting Services, a job will be created by SQL Server Agent if any of the following processes is underway:
    query execution on a remote or local database server
    report processing
    report rendering
    To cancel a job that is running on the report server, we can cancel the job directly or reduce the report execution time-out value in the SQL Server Management Studio and then will stop query execution. Please refer to the steps below:
    Open SQL Server Management Studio, and connect to "Reporting Services".
    Under the Report Server node, right-click on the "Jobs" folder and select "Refresh". Then, right-click on "Jobs" again and click "Cancel All Jobs".
    Right-click on the Report Server node and open the "Server Properties" dialog.
    Click the "Execution" option, and set the "Limit report execution to the following number of seconds:" to a much smaller number. After this issue is resolved, this configuration should revert to the previous state.  
    Managing a Running Process
    Setting Time-out Values for Report and Shared Dataset Processing
    In addition, we can also use the KILL Transact-SQL statement to terminate a normal connection by terminating the transactions that are associated with the specified session ID. For the details information, you can refer to:
    KILL (Transact-SQL)
    If you still have any problem, please feel free to ask.
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • DVD will not stop and start in a Menue Mode

    Hello I am using DVD Studio Pro 4 for a school project and i am looking for some help with this problem.
    The DVD i have created plays and stops when i am watching one of my video tracks, i just can not start the DVD when i am previewing in any menue after i stop it.
    I have created my DVD with 16 menus and 2 video tracks. It burns and plays back fine but i can not stop and start the DVD when i am in a menu mode. The DVD will stop and play when i stop the DVD playing video from one of my video tracks but when i am in menu i push stop on my DVD controller and the DVD will not start back up. The DVD will look like it wants to play but it will not play. I have to open the DVD player tray open in order for it to start the DVD again.
    The DVD is a NTSC, SD, single layered 2.9GB
    Any help would be much appreciated, Thanks.
    PowerBook G4 15 1.25 ghz   Mac OS X (10.3.9)  

    If only five months old it is still under warranty. Take it back.

Maybe you are looking for

  • Major problems with iphone 3G update to OS 4.0.1

    My 3G 16gb was opening screens for messages, phone, photos, etc really slow on OS 4. So thought id update to OS4.0.1. After updating, my phone was displaying "No service" for two hours. I could not make a call. So i tried switching airplane mode on a

  • Code the "Edit Locally" KM functionnality

    Hello experts, Is it possible to reproduce in Webdynpro 4 java the behaviour of the "Edit Locally" functionnality ? or maybe in other technologies ? (jsp, ...) By example, in my View I'd like to create a Check Out button, that automatically loads loc

  • HT4759 every time save a new contact dont Shows in Outlook 2007

    every time save a new contact dont Shows in Outlook 2007

  • Importing ratings from Aperture

    How do I get my aperture ratings across to iPhoto 08? iPhoto 08 is pretty neat and I really like the web gallery feature. I exported my Aperture photos and imported them into iPhoto with pretty good success. A lot of my keywords came across, but the

  • Facebook opens and then closes in one second

    When I open Facebook, I see the start screen, it is "loading" and then closes the app within 2 seconds.