Creating a "ToolTip" like function with a small delay

I have created a tool tip type of a function. The problem is that it constantly shows! How can I go about adding a delay, so the user has to hover the mouse over a particular spot for a second or two before the tip shows? I was thinking up something with a timer and a thread...I'd appreciate advice!
Thanks

I don't see why not. The API documentation specifically mentions tooltips, and the component has getToolTipText() and setToolTipText() methods. (I once tried overriding the getText() method for JButton, and it didn't work at all the way I expected it to work, so I don't exactly know how you would use those methods.)
There's a tutorial about JToolTip that you may not have seen yet:
http://java.sun.com/docs/books/tutorial/uiswing/components/tooltip.html
However this may not help you in deciding exactly where you should be calling the logic to decide what to display in the tool tip. Good luck.

Similar Messages

Can I create a website like Twitter with Creative Cloud?

Can I create a website like Twitter with Creative Cloud?

Start with jQuery Calculation plugin. Tweak values as required.
http://www.pengoworks.com/workshop/jquery/calculation/calculation.plugin.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Creating Report using EPM Functions with Dynamic Filters

Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva Nagaraju

Siva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts.

How to create a feather-like drop with an object?

Hello,
I am looking for a feather-like drop with an object?
I am using AECS3.
Anyone have a good tutorial and/or method?
Thanks,
Simon

Ah, sorry, I assumed too much. CC Cylinder requires a small object on a large layer. There are no ballistics settings for any of this feather stuff, you create it.
Draw a storyboard of your motion path, what does this falling object do and where does it go on the screen?
Does it swoop and pause? Imagine a falling leaf. Suggest you buy a copy of FORREST GUMP to deconstruct the feather animation effects.
Draw that motion path using position keyframes and remember that to create a pause at the top of an arc you need two keyframes.
(You can complicate this by using a 3D space so your feather moves toward and away from the camera but this can be simulated by scaling your cylinder layer.)
When you get the movement roughed out, you can start playing with the rotation settings for the cylinder object. You will attempt to orient the intrinsic movement of the cylinder with the implied air currents and directional changes. For instance, if the feather is climbing an arc, the rotation will follow the trajectory but at the top of the arc, the feather will pause while the rotation flips it over and then it accelerates in a fall as the feather points downward.
This isn't easy. Nothing in After Effects is easy. But it's direct an fairly intuitive when you start thinking about what a light object will do when it becomes a glider. You just need to understand the implied physics and ballistics. Attempting to make it "real" is likely to make the effect appear overworked.
I can send you a small project file. It's not polished at all, but will give you some idea of what you can play with. dbogieATidahopowerDOTcom replace the AT with "@" and DOT with "."
bogiesan

How to use LIKE function with a parameter in Oracle REPORT builder??

how could i use parameter inside a LIKE function in Oracle reports builder?
it works in SQL plus, but not in report builder!!
Example:
select code,desc from item_master where desc
like '%&give_desc%'; ---works in SQL
like '%:give_desc%' ---doesn't work in report builder!!

Hi Renil,
You will need to use the wildcard character (%) and the concatenation character (||) to join to your user parameter.
i.e. like '%'||:give_desc||'%'
Regards,
John

How to create a blog like list with items indented.

Hey guys i know there has got to be a easy way to do this but quite frankly im just stuck. Im trying to create a blog like list kind of like what you see in wordpress or even facebook.
I've tried using the vbox, vgroup and some other without any luck. I guess my basic problem is that once you have the vgroup laid out or the vbox laid out how can you push the one container over to the right a little? in other words kind of lile a parent child relationship? how can i go about doing that? should i be a looking at another component? how would you guys attempted this. Love to hear suggestions or see a snippet of code.
thanks guys.
Miguel

I'm basically trying to recreate a list type of display like so. I think im close but my approach i believe lacks elegance.

How to create a matrix like report with description column

Hi,
currently i have two tables - one describing a job and another describing the stock. it is a simple relation where a job uses stock.
i join job and stock using stock_code. there are three categories of stock - namely envelope, insert, stationary.
i wish to create a cross tab report - basically i would like it to look like
jobname, envelope, stationary, insert
abc, e1, s1, i1
, ,s2,i2
def, e2,s3,i4
, e3, , i5
basically for each job i would like to place the stock code under envelope, stationary, or insert based on what type of stock it is. i can do this in sql, however, i get left with blank spaces.
i do this by
select
"FILE_PARAMETER"."FILE_NAME" as "FILE_NAME",
"CATEGORY",
"STOCK"."STOCK_CODE" as "STOCK_CODE",
decode(upper("CATEGORY"), 'LASER', "STOCK_CODE", '') "LASER",
decode(upper("CATEGORY"), 'ENVELOPE', "STOCK_CODE", '') "ENVELOPE",
decode(upper("CATEGORY"), 'INSERT', "STOCK_CODE", '') "INSERT",
decode(upper("CATEGORY"), 'INSERT',"STOCK"."DESCRIPTION",'') "DESCRIPTION"
from
"FILE_PARAMETER" "FILE_PARAMETER",
"JOB_OVERVIEW" "JOB_OVERVIEW",
"STOCK" "STOCK"
where
"FILE_PARAMETER"."FILE_NAME"="JOB_OVERVIEW"."AP_JOB_CODE"
and "FILE_PARAMETER"."SCODE"="STOCK"."STOCK_CODE"
ORDER BY "FILE_PARAMETER"."FILE_NAME", "CATEGORY"
unfortunately this doesn't give me exactly the output i want. i would like it to show the first piece of stock in each category on the first line, and each subsequent stock on the line after that for each job group. my solution at the moment will put the stock in the corresponding stock category column but i have been unable to find a solution to removing the blank space.
i have created the matrix report in developer and it can do what i want, however, it will not show the description for insert only. the way i have grouped it, it wants to show it all, and being a reports newbie i have no idea how to fix that
any solutions would be very much appreciated!

This feature is supported in MS Access and known as CROSSTAB through TRANSFORM function.
In Oracle this exists but not in a elegant way as in MS.
You have addition function GROUP BY ROLLUP and CUBE and GROUP BY GROUPING SETS, available in 10g, which can help you.
Look in manuals and play with it!

Can I create a calculator like this with jQuery alone?

My knowledge of Javascript is negligible. I was wondering if a calculator like this could be created with jQuery, or if it would require knowledge of writing Javascript?
http://www.sonar6.com/pricing/

Start with jQuery Calculation plugin. Tweak values as required.
http://www.pengoworks.com/workshop/jquery/calculation/calculation.plugin.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Can we achieve like functionality with any other way

Hi experts,
Can any one explain how to achieve the results we get using like operator in any other alternate way
looking for response
regards
naidu

REGEXP_SUBSTR
First, here is my query with LIKE...
SQL> SELECT * FROM scott.emp
2 WHERE ename LIKE 'J%ES';
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7566 JONES      MANAGER         7839 02-APR-81       2975                    20
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
2 rows selected...and here is the same logic with REG_SUBSTR
SQL> SELECT * FROM scott.emp
2 WHERE REGEXP_SUBSTR ( ename, '^J.*ES$') IS NOT NULL;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7566 JONES      MANAGER         7839 02-APR-81       2975                    20
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
2 rows selected.There is a REGEXP_LIKE, too, but I avoided it because it contains the word "LIKE" ;)

How do I create an image like this?

Completely new to PS. How would I create an image like this with text? https://www.facebook.com/photo.php?fbid=10151570901245020&set=pb.50687255019.-2207520000.1 366989903.&type=3&theater
A link to a tutorial would be helpful.
Thanks!

Hi there,
Are you referring to the text, the color effect, or both?
Adding type is very easy - just grab the Type Tool from the tool bar. The article linked above provides some great tips for editing type in Photoshop.
As is the case with many "how to's" for Photoshop, there are several ways to acheive the colorized effect like the one applied to image you linked to. One method is to use Adjustment Layers, which I have outlined below.
1. With your image layer active (it will be highlighted in blue in your Layers panel, as shown below), create a selection of the area you'd like to colorize. I'm using the Polygonal Lasso Tool to create a diagonal selection - to do so, I held down the Shift key on my keyboard as a created my diagonal lines. This might take a bit of practice, but you'll get the hang of it quickly.
2. Then, in your Adjustments panel (if you don't see it, go to Window > Adjustments), click on the Curves adjustment layer, as highlighted below. Now you can play around with the curves to get the effect you'd like. (Here's a quick guide on using the Curve tool)
3. To select the other areas of your image, command (Mac) / control (PC) click on the adjustment layer thumbnail (highlighted below). Then, go to Select > Inverse.
4. Now we want to deselect part of our selection. Grab the Quick Selection Tool from the toolbar and set it to Subract from selection. Then, simply drag the selection brush over the area you want to deselect. In my case, I only want to have the upper-left corner of my image selected.
5. After you have your selection, click on the image layer and add a Curves adjustment layer like before.
6. Repeat steps 3-5 for the other corner of your image and you should end up with something like this:
The nice thing about using adjustment layers is that you can always change them - just double click on the Adjustment layer thumbnail (highlighted in step 3).
Alternatively, you can select areas of your image and fill the selections with flat colors on separate layers. You can then go in a change the Blend Mode and Opacity for each layer.
Feel free to reply with any questions!
Kendall

Pipelined Function with execute immediate

Hello Experts,
I have created a Pipe lined function with execute immediate, due to below requirement;
1) Columns in where clause is passed dynamically.
2) I want to know the data stored into above dynamic columns.
3) I want to use it in report, so I don't want to insert it into a table.
I have created a TYPE, then through execute immediate i have got the query and result of that query will be stored in TYPE.
But when calling the function i am getting
ORA-00932: inconsistent datatypes: expected - got -
Below is my function and type, let me know i am going wrong, and is my logic correct.
CREATE OR REPLACE TYPE OBJ_FPD AS OBJECT
                  (LOW_PLAN_NO VARCHAR2 (40),
                   FPD VARCHAR2 (5),
                   SERIAL_NO NUMBER,
                   CEDIA_CODE VARCHAR2 (2),
                   DT DATE);
CREATE OR REPLACE TYPE FPD_TBL_TYPE AS TABLE OF OBJ_FPD;
CREATE OR REPLACE FUNCTION FUNC_GET_FPD_DATE (P_LOW_PLAN_NO    VARCHAR2,
                                              P_CEDIA_CODE     VARCHAR2,
                                              P_SERIAL_NO      NUMBER)
   RETURN FPD_TBL_TYPE
   PIPELINED
AS
   CURSOR C1
   IS
          SELECT 'FPD' || LEVEL TBL_COL
            FROM DUAL
      CONNECT BY LEVEL <= 31;
   V_STR        VARCHAR2 (5000);
   V_TBL_TYPE   FPD_TBL_TYPE;
BEGIN
   FOR X IN C1
   LOOP
      V_STR :=
            'SELECT A.low_PLAN_NO,
           A.FPD,
           A.SERIAL_NO,
           A.cedia_code,
           TO_DATE (
                 SUBSTR (FPD, 4, 5)
              || ''/''
              || TO_CHAR (C.low_PLAN_PERIOD_FROM, ''MM'')
              || ''/''
              || TO_CHAR (C.low_PLAN_PERIOD_FROM, ''RRRR''),
              ''DD/MM/RRRR'')
              DT FROM ( SELECT low_PLAN_NO, '
         || ''''
         || X.TBL_COL
         || ''''
         || ' FPD, '
         || X.TBL_COL
         || ' SPTS, SERIAL_NO, cedia_code FROM M_low_PLAN_DETAILS WHERE NVL('
         || X.TBL_COL
         || ',0) > 0 AND SERIAL_NO = '
         || P_SERIAL_NO
         || ' AND cedia_code = '
         || ''''
         || P_CEDIA_CODE
         || ''''
         || ' AND low_PLAN_NO = '
         || ''''
         || P_LOW_PLAN_NO
         || ''''
         || ') A,
           M_low_PLAN_DETAILS B,
           M_low_PLAN_MSTR C
     WHERE     A.low_PLAN_NO = B.low_PLAN_NO
           AND A.cedia_code = B.cedia_code
           AND A.SERIAL_NO = B.SERIAL_NO
           AND B.low_PLAN_NO = C.low_PLAN_NO
           AND B.CLIENT_CODE = C.CLIENT_CODE
           AND B.VARIANT_CODE = C.VARIANT_CODE
CONNECT BY LEVEL <= SPTS';
      EXECUTE IMMEDIATE V_STR INTO V_TBL_TYPE;
      FOR I IN 1 .. V_TBL_TYPE.COUNT
      LOOP
         PIPE ROW (OBJ_FPD (V_TBL_TYPE (I).LOW_PLAN_NO,
                            V_TBL_TYPE (I).FPD,
                            V_TBL_TYPE (I).SERIAL_NO,
                            V_TBL_TYPE (I).CEDIA_CODE,
                            V_TBL_TYPE (I).DT));
      END LOOP;
   END LOOP;
   RETURN;
EXCEPTION
   WHEN OTHERS
   THEN
      RAISE_APPLICATION_ERROR (-20000, SQLCODE || ' ' || SQLERRM);
      RAISE;
END;Waiting for your views.
Regards,

Ora Ash wrote:
Hello Experts,
I have created a Pipe lined function with execute immediate, due to below requirement;
1) Columns in where clause is passed dynamically.No, that's something you've introduced, and is due to poor database design. You appear to have columns on your table called FPD1, FPD2 ... FPD31. The columns do not need to be 'passed dynamically'
2) I want to know the data stored into above dynamic columns.And you can know the data without it being dynamic.
3) I want to use it in report, so I don't want to insert it into a table.That's fine, though there's no reason to use a pipelined function.
You also have an pointless exception handler, which masks any real errors.
I'm not quite sure what the point of your "connect by" is in your query as we don't have your tables or data or know for sure what the expected output is.
However, in terms of handling the 'dynamic' part that you've introduced, then you would be looking at doing something along the following lines, using a static query that requires no poor dynamic code, and no pipelined function...
with x as (select level as dy from dual connect by level <= 31)
select a.low_plan_no
      ,a.fpd
      ,a.serial_no
      ,a.cedia_code
      ,trunc(c.low_plan_period_from)+a.dy-1 as dt
from (select low_plan_no
             ,dy
             ,'FPD'||dy as fpd
             ,spts
             ,serial_no
             ,cedia_code
       from (
             select low_plan_no
                   ,x.dy
                   ,case x.dy when 1 then fpd1
                              when 2 then fpd2
                              when 3 then fpd3
                              when 4 then fpd4
                              when 5 then fpd5
                              when 6 then fpd6
                              when 7 then fpd7
                              when 8 then fpd8
                              when 9 then fpd9
                              when 10 then fpd10
                              when 11 then fpd11
                              when 12 then fpd12
                              when 13 then fpd13
                              when 14 then fpd14
                              when 15 then fpd15
                              when 16 then fpd16
                              when 17 then fpd17
                              when 18 then fpd18
                              when 19 then fpd19
                              when 20 then fpd20
                              when 21 then fpd21
                              when 22 then fpd22
                              when 23 then fpd23
                              when 24 then fpd24
                              when 25 then fpd25
                              when 26 then fpd26
                              when 27 then fpd27
                              when 28 then fpd28
                              when 29 then fpd29
                              when 30 then fpd30
                              when 31 then fpd31
                    else null
                    end as spts
                   ,serial_no
                   ,cedia_code
             from   x cross join m_low_plan_details
             where serial_no = p_serial_no
             and    cedia_code = p_cedia_code
             and    low_plan_no = p_low_plan_no
       where nvl(spts,0) > 0
      ) A
      join m_low_plan_details B on (    A.low_plan_no = B.low_plan_no
                                    and A.cedia_code = B.cedia_code
                                    and A.serial_no = B.serial_no
      join m_low_plan_mstr C on (    B.low_plan_no = C.low_plan_no
                                 and B.client_code = C.client_code
                                 and B.variant_code = C.variant_code
connect by level <= spts;... so just remind us again why you think it needs to be dynamic?

How to create a mailbox like INBOX

Hi all!
I want to cennect to my mail server and create other mailboxs like INBOX with java mail API.But I don't know how to start.Your help will be grateful appreciated!

just two steps.....
1. call
Folder urNewFolder= [defaultfolder].getFolder(String theNameUWantToGive).
2.call urNewFolder.create(int type) method (in Folder class type is kind of folder u require i.e read only write only etc.) returns boolean true if created successfully.
now urNewFolder is a fully qualified folder
pawan

Constant what has this got to do with readingHow to create some thing like

Q]     IN the statement
SABC_ACT_READ(4)               VALUE 'READ',
Taken from
http://help.sap.com/saphelp_46c/helpdata/en/fc/eb3d5c358411d1829f0000e829fbfe/content.htm
SABC_ACT_READ(4) is a of type C , & has a value 4 what has this got to do with reading   pls explain.
Q]     How to create some thing like this (event) of our own like say read all alphabets that have s in their string?

In order to Use the Function Module 'AUTHORITY_CHECK_DATASET' , you need to Pass the Exporting Parameter ACTIVITY with a value like given below.
ACTIVITY
Access type, with the following possible values:
- READ: Read file
- WRITE: Change file
- READ_WITH_FILTER: Read file using filter functions
- WRITE_WITH_FILTER: Change file using filter functions
- DELETE: Delete file
These values are defined as constants and one such constant is SABC_ACT_READ with a type char and length 4 with a Value of 'READ' .
The constant is being used in that Function module to check the READ Authorization of the user for the file specified.
Hope this helps.
Vinodh Balakrishnan

On the AGO Function need to Create TODATE function with Diff levels - MTD,Q

Hi All,
My Basic Requirement is to Create Time Series Function on AAA ie ( Month To Date , Quarter To Date and Year To Date )
The Logic for the AAA = XXX / Previous 3 Months Revenue.
we know that we can use the AGO Function to create Previous 3 months Revenue with Month is Level . But the issue is .... i cant use AGO function since i need to perform Year to Date, QTD and MTD upon 'AAA' this OBIEE doesn't permit to use nested time series functions upon varying levels .
So How can i Resolve the issue ie creation of TODATE function on the AGO Function with Diff levels
Thanks,
Swapna S

hi,
for your requirement create three repository variables like
for previous 3 months create repository variable like
select to_char(sysdate,'yyyymm') -3 from dual;
for month to date first calculate first day of the month
select To_Char(Add_Months(Last_Day(Sysdate),-1) + 1,'MM/DD/YYYY') from dual;
after put a filter in answers date between first date of the present month and current date
create the same thing for year to date
calculate first date in the year like following query
select To_Char(Trunc(Sysdate,'YEAR'),'MM/DD/YYYY') from dual;
after that apply filter date b/w first date in the year and current date
i hope it works for your scenario
Regards
Naresh
Edited by: Naresh Meda on Nov 10, 2008 2:08 AM
Edited by: Naresh Meda on Nov 10, 2008 2:12 AM

Java networking library with RMI-like functionality?

Is anyone aware of a Java networking library, that provides RMI like functionality and TCP/IP with an intuitive API and minimal coding required? I'm working on a prototype, but I'm having difficulty getting Java's RMI functionality working through Netbeans, so while I'm prototyping I'm looking for alternatives so I can code more and frustrate less!
Thanks

BobCrivens wrote:
Thanks ejp.
I guess I'll re-phrase the original question. Is there a small open-source Java networking library that doesn't include RMI, but gives a simple API for TCP/IP connections (higher level than sockets) and includes file transfer? I don't know if I need things like FTP/HTTP/POP/SMTP support etc for now.
ThanksI gotta be honest with you here. I think you need to stop coding for now and get your requirements in hand with a better grasp on how network programming works.
Not being insulting here but your questions show your current knowledge level on the subject to be not really sufficient for success with whatever it is you want to do.
There is the networking tutorial available here http://java.sun.com/docs/books/tutorial/networking/index.html but it might do you well to tell us exactly what you are trying to do. Are you trying to build an FTP client? Are you trying to build a whole client/server program of some sort?
Because everything now is very vague. You seem to be looking for protocols or API's between TCP and things like FTP for example and none exist because these sit directly on top of TCP. So you either deal directly with the Sockets or you deal with some library that deals with the protocol in question. There isn't an "in-between" layer here.

Creating a "ToolTip" like function with a small delay

Similar Messages

Maybe you are looking for