Delivery completed indicator for STO cannot be set!

Dear colleagues,
There are number of STO’s those goods issue quantity > quantity of goods received. Because of this delivery completed indicator cannot be set due to message “06 848 - Delivery completed indicator cannot be set for item XXXXX”.
There is an OSS note (167795) that allows to set delivery completed indicator for such purchase orders. Even though our SAP release is 6.04, report RM06EV70 does not exist (yet BADI ME_ARCHIVE_ACTIVE is active) in the system and OSS note cannot be implemented.
Any help would be appreciated.
Regards,
Melih
PS. Please do not provide answers like “the goods receipt must be first posted via the entire goods issue quantity; then you can post a scrapping via the shortfall quantity” since there are backdated STO’s.

Hi,
Find STO created for which plant in t.code:ME23N and check MRP parameter maintained for that plant in t.code:OPPQ( also check entry of that plant in t.code: OMCD).
Also cross check which Field Selection Key assigned to your STO PO document type and check “Delivery completed" indicator” available as Optional entry in GR/IR control segment in your Field Selection Key.
SPRO - > MM - > Purchasing -> Define Screen Layout at Document Level
Regards,
Biju K

Similar Messages

  • Delivery Completed Indicator for Services

    Hi Guys
    In PO's, in the delivery tab, the Delivery Completed Indicator appears only for Stock PO's. Is it possible to make the Delivery Completed Indicator appear for non stock PO's as well, I mean for services?
    Thanks

    Hi,
    It is not possible to setup Delivery Completed Indicator For Services Purchase orders or Non stock Items.
    Reg,
    Ashok
    Rewards welcome.

  • DELIVERY COMPLETED indicator for Services Purchase Order

    hello experts,
    i'm working in SAP with R3 4.7 for developing funtion / BAPI for a mobile web application for services purchase order.
    i have a big problem:
    is it possibile to set the DELIVERY COMPLETED indicator (<i>ELIKZ</i>) in services purchase order via BAPI or Function Module?
    <i>I'm working with BAPI_PO_CHANGE but and i succeded with material PURCHASE ORDER but not with SERVICES PURCHASE ORDER</i>.
    can anyone help me?
    thanks in advance,
    Eliana

    For material:
    Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
    For Services:
    As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
    DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
    So you can check the DCI for service same way as you do for material
    Hope it will help you
    Regards
    Vikrant

  • Delivery completed indicator for Service purchase order item

    Want to check the PO item for services already delivery completed.
    Field EKPO-ELIKZ (delivery completed indicator) is for material line item, is there a equavalent field for Service line item?
    What field /how to to check for a service line item in Purchase order already delivery completed ?

    For material:
    Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
    For Services:
    As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
    DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
    So you can check the DCI for service same way as you do for material
    Hope it will help you
    Regards
    Vikrant

  • Delivery Completed indicator for PO of Services

    Hello everyone!
    The PO for materials/goods has a delivery completed indicator in the Delivery tab of the Item Detail. But if the PO is for Service, we can not find a delivery completed indicator. Does the system have a counterpart of that indicator for Service items? We need to get this for our customized report to indicate whether a service has already been received completely or not.
    Thank you.

    hi,
    I think you get the Final entry indicator for SES documents...
    Now if you want the IR shd be created first before the completion of the entry...then its always better to do firstly IR doc and then SES document...
    I am saying this because, as per your requirement yuou don't need to check the service procured, but only wanna pay...
    But as per my suggestion this is not the right way..you shd firstly check the services done and then only you shd pay...
    Think abt it...
    Regards
    Priyanka.P

  • Reg:Delivery complete indicator for service PO

    Dear all,
    I have configured delivery completed incator for the specific field selection group for the particular plant for service PO's also i have activated in inventory management the same indicator for that plant but for service PO document type i dont get that indicator . Is there any specific settings to be done plz guide
    regards
    VKK

    Hi,
    Have you checked the field settings for the below field selction keys, because the field status follows the link rule and priority is assigned based on that.
    Field selection keys:
    - Transaction: E.g ME21N, ME32, ME33 etc.
    - Activity Category: Create AKTH, Change AKTV, Display AKTA & Extend PO AKTE
    - Document type: UBF for UB, NBF for NB
    - Item category: is determined in combination with the document category.
    First two characters consist of letters PT, third item category and fourth document category:
    A for RFQs, B for PRs, F for POs, K for contracts, L for SAs. e.g PT3F for a SC item in a PO.

  • Delivery completed" indicator cannot be set for item 00001

    Hi all,
    I have done a inter company stock transfer order , with respect to that Order I made  Outbound delivery and posted GR with respect to outbound delivery. I have done  MIRO for  PO  for all the Item ,
    Now  I  need to  return some  material  to supplying plant for  some reason,  I tried  to  make GR (MIGO)  against the same  outbound delivery with movement type 122. the document is posted  but  when I tried to  make complete  delivery indicator  it does not allow me to do so .
    it says me
    Delivery completed" indicator cannot be set for item 00001
       Message no. 06 848
    Diagnosis
       You have set the "delivery completed" indicator for a stock transfer  item.
    system Response
       You can only set the "delivery completed" indicator in stock transfer  items if
       o   the sum of the goods issue quantities in the supplying plant equal  the sum of the goods receipt    quantities in the receiving plant.
       o   the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
    Regards,
    Dhilipan.

    I dont think you need to set "delivery completed" indicatory while returning from one plant to another.
    For example : You ordered 100 qty. and you are receving only 80 Qty. and you don't expect any receipts anymore. in this case you want to close the open purchase order with delivery completed indicator.
    But while returning to vendor or to another plant you are not referring the P.O directly and hence you dont need "delivery completed indicator'

  • Tick Delivery Completed Indicator through MEMASSPO for STO's

    hi-
    We have a lot of old STO's which are about 8 -12 months old and are still showing as open for delivery due to short delivery.
    Now the project sites have closed and we dont have any stores or store keepers in the closed Sites.
    Can we run the Program MEMASSPO for STO's which are showing Items open for delivery to Tick the Delivery completed indicator this way?
    If not, what are the other available options to have the Tick indicator on the delivery completed Tab for STO's.
    Thanks in advance.
    Edited by: Srikanth BNV on Jan 23, 2010 12:11 AM

    before you do something with Masstransactions, you should always try to gain experience with manual maintenance e.g. in ME22N.
    By the way, you cannot close a STO with a delivery complete indicator. A STO is only considered as closed if you have received as much as was issued in the delivering plant.
    read OSS Note 196280 - Tolran. and finl deliv. indic. fr stck transp. ord.

  • Delivery Completed indicator is automatically set in MB31

    Dear SAP Gurus,
    I have an issue for which I need you help.
    In my scenario, we are manufacturing co-products. The actual produced qty of each of the co-products may vary from the ratio which is specified in the BOM. Hence, I have set the "unlimited overdelivery allowed" indicator in WS view for all my co-products.
    Further, the process order is created for the entire month. Comfirmations are carried out on a day-to-day basis.
    The system works perfectly till around 25th of the month. While doing GR in MB31for 26th of the month, I face a peculiar problem.
    For one of the co-products, the received qty exceeds the order qty. Since "unlimited overdelivery allowed" indicator has been set in the Material Master for this co-product, the system allows me to post the excess GR qty. This is fine. However, it is setting the Delivery Completed Indicator on its own. I then manually remove the indicator and post the GR document. But the system still sets the delivery completed indicator for the co-product item on its own in the Process order.
    Even if I remove the indicator in the Process order, the system doesn't propose the co-product item while doing GR from 27th onwards.
    Please help me in resolving this issue.
    Thanks!
    Nitin

    Hi Hiren
    Thanks for the reply.
    If I make the change as suggested by you, then the GR from Purchase orders would also be affected.
    Is it possible to control the setting of this indicator on a movement type level? If this is so, then I can create a new movt type and use it for production GR .
    Please revert.
    Regards,
    Ntiin

  • Delivery completed indicator in PO for linked empties

    Dear All,
    in the cross-company PO we have several items. One of the items has the
    linked empties (sales and distribution BOM component) which is determined
    automatically in PO with item count 11 (if main item has the count 10 so BOM component has count 11 and next item is 20...30 etc.). When we post GR for this PO we have the Delivery completed indicator for all items
    except linked Empties (it seems because the linked Empties 11 are the
    part of the main item 10 and there is no GR for item 11). So after the GR
    we have PO still in the MD04 list for the linked empties.
    Is it possible to set Delivery complited indicator for Empties item of PO with standard functions?
    Thanks in advance
    Igor

    Hi,
    If you are in ERP 6 and Ehp4, you can use new message M7 433 (The Delivery Complete Indicator is set for the purchase order item) in connection with BAdI MB_GOODSMOVEMENT_DCI. If this message is configured as an error message. No further goods receipt can be posted for a PO item for which the delivery complete indicator is set.
    Since you are not working on Ehp4, you can use the BAdI to incorporate custom logic.
    Hope this is what you are looking for!
    Reetesh
    Edited by: Reetesh on Nov 25, 2011 8:20 AM

  • MIGO Process order-Delivery completed indicator by default as "2. Set"

    Hi all,
    Can We have the MIGO Process order-Delivery completed indicator by default as "2. Set" instead of Set automatically by any configuration.
    Pls suggest.
    BR,
    Subbu.

    Hello Subbu,
    Go to SPRO --> MM --> Inv Mgmt & Physical Inv --> Goods Receipt --> Set "Delivery Completed" Indicator
    Deselect the "Delivery Completed" indicator for your Plant. Then go back & do the MIGO and check.
    Hope it will help.
    Regards,
    Anup

  • NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

    I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
    F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
    THANKS/

    Hi Malka,
    It's possible set the system to mark automatically the delivery completed indicator.
    First you need to set the under delivery and over delivery tolerances.You do this in customizing:
    Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
    Once you set this, you can insert this value keys on Material Master Record for the materials.
    When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
    In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
    In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
    You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
    You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
    Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
    Regards,
    Rodrigo

  • Not able to put delivery completed indicator in scheduleing aggrement

    Hi ,
    We are unable to put delivery completed indicator in scheduling aggrement . We are geting following message and its common scheduleing aggremnt and material don't have any stock and sub contracting order . Still what the point s we need to check in this case .
    "Delivery completed" indicator cannot be set for item 00010
    Message no. 06 848
    Diagnosis
    You have set the "delivery completed" indicator for a stock transfer item.
    System Response
    You can only set the "delivery completed" indicator in stock transfer items if
    the sum of the goods issue quantities in the supplying plant equals the sum of the goods receipt quantities in the receiving plant
    the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
    Procedure
    Cancel the "delivery completed" indicator."
    RB

    Is there an old/any STO pending.(Plant to plant delivery) of that particular item....
    like Completion of stock transfers with GI qty > GR qty scenario....
    plz check and revert back,if there is one plz close it and then put indicaor in SCHLD AGREE...

  • Delivery completed indicator wrt Mat document & P.O

    Hello
    why is it that at times the
    "Delivery completed indicator of the material document not set  "
    while the "Delivery completed indicator of the purchase order item" is set.
    can anyone explain the logic behind this  ?
    Thanks

    Hi,
    Delivery completed indicator in the PO is set manually at the time of PO creation.
    After GR if the quantity of  GR is equal to PO quantity then it will be set automatically. Indicating that you cannot expect further GR for the PO item.
    Regards
    Ravi shankar.

  • PORDCH idoc outbound Delivery Completed Indicator

    Hi all,
    I am using PORDCH02 for sending PO changes. I have selected this IDoc due to I have to send the delivery completed indicator. I have to send PO changes when the delivery completed indicator has changed. But there are two situations when the indicator changes:
    - When we change manually the indicator in the PO
    - GR is updated of the whole quantity
    Anyone could tell how I can send the IDoc when the delivery completed indicator is set automatocally based on GR?
    I am evaluation to use a change pointer (BD52) in order to send the PO changes based on the delivery completed indicator, anyone could tell me more detail in order to create a change pointer based on delivery completed indicator for PORDCH?
    Thanks in advance,
    Marta

    Hi Marta,
    Automatic updating of Del. completed indicator is not a change in the PO and hence we cannot set a change pointer for this.
    Please check if you can take help from technical team in creating a program to check the history of the po lines and if the field is marked for the completion, trigger the idoc.
    Regards,
    Pavan

Maybe you are looking for