Different environments created for Debug and Release libraries

Environments created in Debug mode cannot be read by software compiled in release mode. The same is true for the reverse.
Both libraries compiled with VS.NET 2005 (C++). The environment created in Debug mode is slightly different than the library created in the Release mode. I would assume that this is a bug?
__db.001 - no change
__db.002 - DIFFERENT
__db.003 - no change
__db.004 - no change
__db.005 - DIFFERENT
__db.006 - no change
Aeronautical.dbxml - no change
log.0000000001 - no change
The environments are created using the following flags:
// Flags required when opening the XmlDB Environment
m_environmentFlags =      DB_CREATE |     // If the environment does not exist, create it.
                         DB_INIT_LOCK |     // Initialize the locking subsystem
                         DB_INIT_LOG |     // Initialize the logging subsystem
                         DB_INIT_MPOOL |     // Initialize the cache
                         DB_INIT_TXN |     // Initialize transactions
                         DB_THREAD;          // Ensure Environment is
                                             // free-threaded
The database contains a single XML document.
An attempt to open() fails with the following error message:
DbEnv::open: No such file or directory

Hey Ron,
Thanks for answering so quickly. Having release and debug builds able to manipulate the same environments is a requirement of convenience. Our project builds both release and debug versions of our software and distributes both versions to the development team daily. The team is encouraged and expected to run both debug and release builds to test their contributions and because the system opens the database (which is distributed with the build) upon startup, one of the two will always fail to load. That leaves us with two obvious solutions/workarounds. The first being to distribute the build with 2 environments and ensure that the build chooses the correct environment based on whether it is debug or release. The second is to rebuild the debug library without the --enable-diagnostic switch.
We have no immediate need to enable the diagnostic information (that I am aware of...in fact I don't even know what types of checks are put in that would be helpful).
Do you have an alternative solution that others have used as a work around for this?

Similar Messages

Compiling differently for debug and release

I want to produce slightly different .class files for my debug and release compilations. For debug, methods like toString() should return rich information which should not be present in the release version. In fact, I want most of my debug specific code to not be included in the final release to keep ti's file size down.
I realise I can do this by creating something like
public interface MyGlobals {
static final boolean DEBUG = false;
}and implementing this on any class that needs to do debug specific work. However, I'm in a bit of a chicken and egg scenerio. This file needs to exist during development time so that every class that needs it can implement it - however, this would prevent me from dynamically changing it based on whether I'm doing a debug or release build. On the other hand, if the file is generated automatically at compile time, all the classes that need to refer to it will need to refer to a non-existant source file, which will cause problems in my NetBeans IDE.
Is there a way around this? It would be nice if there was some sort of a configuration file you could specify to to alter how the code is generated. Something similar to C++ #ifdef.

I realise I can do this by creating something like
public interface MyGlobals {
static final boolean DEBUG = false;
/code]You should be careful about this, by the way, rember that this kind of constant value gets compiled in to classes that reference it, and java doesn't always pick up the need to recompile when the source of MyGlobals changes.
On the other hand, if you don't declare it final then the compiler can't optimise out code that you want it to exclude for you.

Different behaviors of NSTask within Debug and Release configuraton

Hey there,
I am writing my first OSX application. It will be a starter helper for some daemons.
In order to start the daemons I am using NSTask but this class behaves completely different within the two build configurations (Debug and Release).
If I choose Debug - everything works fine, my daemon (apache) gets started. But if I choose Release, I get this error message in the log console:
Jan 11 22:50:49 Synthomat [0x0-0x682682].com.yourcompany.PAMP[24421]: httpd (no pid file) not running
I know, this is an apache specific error message. But why does it not appear when I choose the Debug environment? Are in Release some environment variables missing or so?
Here is my code part:
// get bundle path
binDir = [NSString stringWithFormat:@"%@/Library/bin", [[NSBundle mainBundle] bundlePath]];
// compose command path
NSString *command = [NSString stringWithFormat:@"%@/apachectl", binDir];
// run command
[NSTask launchedTaskWithLaunchPath: command
arguments:[NSArray arrayWithObjects:@"start", nil]];
Any idea, anyone? - Thanks in advance

synthomat wrote:
My idea was to distribute a full web stack within my application. Thus there should't be touched other system directories or files except the ones in my application bundle.
Launchctl is similar to xinetd. You can run it in user space out of your own directories.
Its not the apache which comes with osx!
Is it the same one in XAMPP?

What is the primary difference between Debug and Release build?

I'm coming from the world of VS, where there's a clear distinction between a Release and Debug builds. In Xcode I can't seem to see how two are different and how would I benefit from, say, a Debug build. Can someone explain this for me?

The differences between the Xcode debug and release builds are similar to the differences you'll find on any other system, though the Xcode interface might not present them as obviously. Basically, a debug build preserves all kinds of information that was developed during compilation but is no longer necessary at runtime. The presence or absence of this information (e.g. symbol tables and mappings which provide the original name of each source code variable and the source code line number corresponding to each instruction), becomes increasingly obvious as you use gdb and other debugging tools.
We normally would never want to release a debug version (in the iOS case, of course, it would never be accepted) because the binary is usually much larger and the performance will probably be compromised as well. For example, a typical debug build will have many perfomance optimizations turned off because these can make debugging more difficult. It's also common to enable "assert" statements in a debug version. These will bring the program down rather than giving the user any options or attempting recovery.
For more info specific to Xcode, see [Build Configurations|http://developer.apple.com/library/ios/documentation/DeveloperTo ols/Conceptual/XcodeBuildSystem/400-BuildConfigurations/build_configs.html#//appleref/doc/uid/TP40002692-SW7] in the +Xcode Build System Guide+. To get into lower level details, refer to the gcc docs, maybe starting with [3.9 Options for Debugging Your Program or GCC|http://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html]. You might also want to take a look at your Target Build Options for the Debug configuration (Project->Set Active SDK->Use Base SDK and Project->Edit Active Target->Build). There's a one-to-one mapping between many of these settings and the gcc options.
\- Ray
p.s.: Didn't mean to repeat Xnav's points. As usual, I was still editing long after he posted! To clarify one difference: Selecting the Edit Active Target menu item gets you to the same place as double clicking on the icon for the active target in the Targets group of the Groups & Files tree. - R
Message was edited by: RayNewbie

HT5622 How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

Create a new Apple ID for the second phone. If you are setting the phones up as new phone enter the ID you want to use on each phone.
If both phones are already signed in to one Apple ID then use the settings app to change Apple IDs on one phone.
Settings > iTunes and App Store > tap on the Apple ID > sign out > sign in with alternate Apple ID.
Note that if you have downloaded apps with the original Apple ID on the phone with the new Apple ID, those apps will still be associated with the old Apple ID and will require the old ID and password in order to update them.

Difficult with different coding masks for operative and std templates.

Hi Experts
I have below coding masks
OP-XXXX-XX-XX For operative structures (not allowed for std templates)
ST-XXXX-XX-XX For std tempplates (not allowed for operative structures)
But i am unable to create operative project using std template.
I have disabled Lck for std mask and tried, then i could create project but the operative project got created with WBS element's short id 'ST' and not with 'OP'
How to ensure getting the right WBS id while copying from different standard coding mask?
warm regards
ramSiva

Hi Ahmed
I have gone through help, but i did not get any clue to make use different project IDs for std and operative.
I am just looking for this to have dedicated structures for both std and operative, due to which one can easily recognise the nature by seeing the project id.
Of course, it is very comfortable using unique project ID / coding mask for both. Still i am exploring. You may suggest if feasible.
warm regards
ramSiva

Is it possible to have different pricing procedure for SO and invoice?

Hi,
Is it possible to have different pricing procedure for SO
and invoice?

Hi Kiran35086
--Yes you can have it.But it is based on the business requirement
--Create 2 Document pricing procedures & assign one in VOV8 & another in VOFA
--In Sales Document VOV8 you maintain different document pricing procedure Ex A
--Go to VOFA & select your billing document type in Account assignment/pricing assign the document pricing procedure.EX- B
--Create condition records in VK11 for the condition types which are included in the pricing procedures
--Maintain pricing procedure determination in OVKK with 2 different Document pricing procedure & save it
--When you raise SO in VA01 you will find one pricing procedure & when you raise billing in VF01 you find another pricing procedure in conditions.
Let me know if your problem is solved
Regards
Pradeep

How Long For Fixing and Release WPA/WPA2 on N900?

Hay Nokia!!
I use N900 Maemo PR1.2 Lasted update.
At home i'm create WPA2-Shared-key (Belkin Router) it's worked.
At Friend Home i'm used WPA2-Shared-key (Belkin, Lynksys, D-Link) it's worked no problem.
At Office i can not used WPA2-Shared-key with Lynksys difference model it's not worked, but many co-worker worked with iPhone.
and My Friend use iPhone 3Gs worked with all WPA2 - Shared Key that i'm try with N900.
i try change MAC by macchanger it's a same Not worked.
i'm asking for Maemo.org they toll me it's BUGS -_-"
How long For Fixing and Release??

you will not get a response as other then the mods, nokia folks do not really watch this blog. your best bet is the maemo community where you were before.
maemo.org

Different Ringtone Notifications for Text and Email

I would like to assign different ringtone notifications for texting and email, and if possible, different ringtones for each of my two email accounts. I need to see texts immediately, but not emails. Am picking up the phone 50 times a day so I don't miss a text, critical to my work. Could do this on Bb Storm, but can't figure out on Incredible. At a minimum, I would like to shutoff notification for email, and just get pinged for texts. Thanks!!

valniemiec wrote:
I would like to assign different ringtone notifications for texting and email, and if possible, different ringtones for each of my two email accounts. I need to see texts immediately, but not emails. Am picking up the phone 50 times a day so I don't miss a text, critical to my work. Could do this on Bb Storm, but can't figure out on Incredible. At a minimum, I would like to shutoff notification for email, and just get pinged for texts. Thanks!!
Well,
The default notification tone that you set in the Settings->Sound is for the default tone in the generic e-mail account and all other notifications. If you use the Gmail client, you can set your own personal ringtone in it's settings (Menu->Settings). In the messaging Application you can also set a custom notification sound from there as well (Menu->Settings)
As for different e-mail accounts using the same e-mail application, I don't think that is possible with the in stock app...tho I am not totally sure I haven't use it like that before.
Hope that helps!

How do I have 1 apple id for the family to use in the iTunes and app store and a different apple id for iCloud and FaceTime and imessages

how do I have 1 apple id for the family to use in the iTunes and app store and a different apple id for iCloud and FaceTime and imessages?

See also Using your Apple ID for Apple services
specifically the section "Using one Apple ID for iCloud and a different Apple ID for Store Purchases".

My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

My husband and I share an iTunes account. We both just got iPads. How can we program them to have different phone numbers for FaceTime and messages

Use different email address (gmail?) just for FaceTime and Messages.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

Do you mean can you use one Apple ID for FaceTime and one for iMessage? You should be able to. Or, do you mean, can you log into iMessage (or FaceTime) with two Apple IDs at once? No.

Different Document types for Reciepts and payment-Cash Journal

Hi Gurus,
Please tell me how can we make different document types for reciepts and payments in cash journal and where we need to assign it??
Please revert asap.
Thank You

Hi
While posting the transactions by using FBCJ T.Code u can select the Receipts or Payments or Expenses then the documents will be genereted. FBCJ02 is the T.Code for no.range there u can assign the no.range intervels.
Shammi

How we will know whether RFC destinations have been created for sender and

Hi,
How we will know whether RFC destinations have been created for sender and XI system.
Thanks,
dhanush.

Hi Dhanush,
you can check using the TCODE SM59.
Regards
Kenny

PCUI - Different Text type for Accounts and Contact Persons

Hi All,
While configuring the Text Determination, how can we have different determination procedures for Accounts and Contacts. On the CRM back end side there is no distinction on the objtect type for account & contacts. Instead there is one for BP.
We defined a Text Det Proc for Object BUT000 (Business Partners) which gives us the same text types in both accounts and contact person screens in PCUI. But we want different text types. Can any one please advise.
Thanks in advance,
Raj K

Hello All,
Any suggestions in this matter would be greatly appreciated. Thanks,
Raj Kasa

Different environments created for Debug and Release libraries

Similar Messages

Maybe you are looking for