DVR Splits Recorded Show into Two Segments?

I was wondering if anyone else has had an issue with their DVR splitting a show into two segments?
I have the Motorola 7216? Home Media DVR.  At times, when we record a show, and then go to play it, the show will be listed in the Recorded Programs as two shows.  For instance, the first listing will list that the show recorded for 7 minutes.  Then, the second listing of the same show will show that it recorded for the remaining 23 minutes.  It is the same 30 minute show, but for some reason, the DVR stops recording after so many minutes, and then finishes recording the show as a second show.
Has this happened with anyone else, and if so, is there anything that can be done to fix this?  The only answer I have gotten from Verizon is to unplug the DVR to reset it. 
This doesn't happen all the time, but it happens enough that I find this annoying.
I would appreciate any input anyone can give.  Thanks.
Solved!
Go to Solution.

MiMeQu wrote:
I was wondering if anyone else has had an issue with their DVR splitting a show into two segments?
I have the Motorola 7216? Home Media DVR.  At times, when we record a show, and then go to play it, the show will be listed in the Recorded Programs as two shows.  For instance, the first listing will list that the show recorded for 7 minutes.  Then, the second listing of the same show will show that it recorded for the remaining 23 minutes.  It is the same 30 minute show, but for some reason, the DVR stops recording after so many minutes, and then finishes recording the show as a second show.
Has this happened with anyone else, and if so, is there anything that can be done to fix this?  The only answer I have gotten from Verizon is to unplug the DVR to reset it. 
This doesn't happen all the time, but it happens enough that I find this annoying.
I would appreciate any input anyone can give.  Thanks.
This has happened to me on occasion, but  the reason was that there was a power surge, and the box rebooted.  Or, if the STB crashes and reboots, it also splits the recording.  Other than power issues or stb reboots, it hasn't happened, and I have the same STB.

Similar Messages

  • Help needed with SQL to split huge data into two excel or text files.

    Hi,
    I have a table which has around 1850000 records. I want to split the data into two sets and import the data in .txt or execl file.
    How can i break upthe records using rownum or any thing
    select * from tablename where rownum<940000 fetched some records
    but
    when i gave select * from tablename where rownum>940000 it was not fetching records.
    Guideme

    when i gave select * from tablename where rownum>940000 it was not fetching records.try this
    select * from (select tablename.*, rownum rn from tablename) where rn >940000

  • Oracle rownum usage for splitting a Table into two equal parts.

    Hi All,
    I have a table which has like 1.2 billion records and i would have to split the table in two parts for my Archiving needs.Unfortunately that table does not have any unique key or primary key or data stamp which i can rely for.
    I would have to use the rownum concept to divide the table.
    I am using the below
    SELECT * FROM (SELECT ENAME, SAL FROM EMP ORDER BY SAL DESC) WHERE ROWNUM < 5000000;
    But the problem is that the table is taking forever to retrieve as it has to do a order by and then retrieve the data as per the where clause.
    The question i have is that instead of using a orderby clause to get the same rownum for the row every time, can i directly rely on the fact that the database is read only and the Rownum would remain same even without oder by clause....
    Thanks....

    WARNING! There is a bug in the code, see EDIT: at bottom of post for details
    Justin,
    It makes sense that Oracle could order over rowid without sorting, but I see a sort in the explain plan:
    SQL> create table t as select 1 as data
      2  from all_objects
      3  where rownum <= 100000;
    Table created.
    SQL> explain plan for select *
      2  from (select t.*, row_number() over (order by rowid) rn from t)
      3  where rn < 50000;
    Explained.
    SQL> select * from table(DBMS_XPLAN.DISPLAY);
    PLAN_TABLE_OUTPUT
    Plan hash value: 327232321
    | Id  | Operation                | Name | Rows  | Bytes |TempSpc| Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT         |      | 99651 |  2530K|       |   489   (3)| 00:00:07 |
    |*  1 |  VIEW                    |      | 99651 |  2530K|       |   489   (3)| 00:00:07 |
    |*  2 |   WINDOW SORT PUSHED RANK|      | 99651 |  2432K|  7056K|   489   (3)| 00:00:07 |
    |   3 |    TABLE ACCESS FULL     | T    | 99651 |  2432K|       |    31   (7)| 00:00:01 |
    Predicate Information (identified by operation id):
       1 - filter("RN"<50000)
       2 - filter(ROW_NUMBER() OVER ( ORDER BY ROWID)<50000)875820,
    What are you doing with the results of the select to archive the table in two pieces? If the archive is in the DB in two seperate tables, multi table insert would be an option:
    SQL> create table archive_1 (data number);
    Table created.
    SQL> create table archive_2 (data number);
    Table created.
    SQL> explain plan for insert when mod(rn, 2) = 0 then into archive_2 (data) values (data)
      2  else into archive_1 (data) values(data)
      3  select rownum as rn, data
      4  from t;
    Explained.
    SQL> select * from table(DBMS_XPLAN.DISPLAY);
    PLAN_TABLE_OUTPUT
    Plan hash value: 828723766
    | Id  | Operation             | Name      | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | INSERT STATEMENT      |           | 99651 |  2530K|    31   (7)| 00:00:01 |
    |   1 |  MULTI-TABLE INSERT   |           |       |       |            |          |
    |   2 |   INTO                | ARCHIVE_2 |       |       |            |          |
    |   3 |   INTO                | ARCHIVE_1 |       |       |            |          |
    |   4 |    VIEW               |           | 99651 |  2530K|    31   (7)| 00:00:01 |
    |   5 |     COUNT             |           |       |       |            |          |
    |   6 |      TABLE ACCESS FULL| T         | 99651 |  1265K|    31   (7)| 00:00:01 |
    SQL> insert when mod(rn, 2) = 0 then into archive_2 (data) values (data)
      2  else into archive_1 (data) values(data)
      3  select rownum as rn, data
      4  from t;
    100000 rows created.Another option would be to use the last digit of rowid to split the table into two groups, but they will not be equal sized.
    SQL> explain plan for select *
      2  from t
      3  where substr(rowid, length(rowid), 1) = upper(substr(rowid, length(rowid), 1))
      4  or substr(rowid, length(rowid), 1) in ('0', '1', '2', '3', '4');
    Explained.
    SQL> select * from table(DBMS_XPLAN.DISPLAY);
    PLAN_TABLE_OUTPUT
    Plan hash value: 2153619298
    | Id  | Operation         | Name | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT  |      | 59025 |  1441K|    98  (71)| 00:00:02 |
    |*  1 |  TABLE ACCESS FULL| T    | 59025 |  1441K|    98  (71)| 00:00:02 |
    Predicate Information (identified by operation id):
       1 - filter(SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='0
                  ' OR SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='1' OR
                  SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='2' OR
                  SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='3' OR
                  SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='4' OR
                  SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)=UPPER(SUBSTR(ROW
                  IDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)))
    Note
       - dynamic sampling used for this statement
    23 rows selected.
    SQL> explain plan for select *
      2  from t
      3  where substr(rowid, length(rowid), 1) <> upper(substr(rowid, length(rowid), 1))
      4  and substr(rowid, length(rowid), 1) not in ('0', '1', '2', '3', '4');
    Explained.
    SQL> select * from table(DBMS_XPLAN.DISPLAY);
    PLAN_TABLE_OUTPUT
    Plan hash value: 2153619298
    | Id  | Operation         | Name | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT  |      | 40627 |   991K|    41  (30)| 00:00:01 |
    |*  1 |  TABLE ACCESS FULL| T    | 40627 |   991K|    41  (30)| 00:00:01 |
    Predicate Information (identified by operation id):
       1 - filter(SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'
                  0' AND SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'1' AND
                  SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'2' AND
                  SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'3' AND
                  SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'4' AND
                  SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>UPPER(SUBSTR(RO
                  WIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)))
    Note
       - dynamic sampling used for this statement
    23 rows selected.
    SQL> select count(*)
      2  from t
      3  where substr(rowid, length(rowid), 1) = upper(substr(rowid, length(rowid), 1))
      4  or substr(rowid, length(rowid), 1) in ('0', '1', '2', '3', '4');
      COUNT(*)
         59242
    SQL> select count(*)
      2  from t
      3  where substr(rowid, length(rowid), 1) <> upper(substr(rowid, length(rowid), 1))
      4  and substr(rowid, length(rowid), 1) not in ('0', '1', '2', '3', '4');
      COUNT(*)
         40758
    EDIT:
    I realized that I screwed up above. In hind sight I don't know what I was thinking. I was attempting to use X = upper(X) to find the upper case characters A-Z. So the two queries to split rows based on the last character of rowid are not right. I don't have time to fix now, but wanted to leave a note of warning.
    Edited by: Shannon Severance on Jul 29, 2011 1:34 AM

  • Why is it when i update my status on facebook from iohone it splits the updates into two differents boxes with some funky symbol. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app.

    why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK  i have already update my phone too.
    if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload,  . But its a pain of not using my IPHONE APP for facebook cause it does that.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Ask split long text into two line into same cell for ALV

    Dear All,
    Is it possible split long text into two line into same cell for ALV display data?
    Regards,
    Luke
    Moderator message: please search for information before asking.
    Edited by: Thomas Zloch on Feb 24, 2011 10:12 AM

    Keep options: Select the paragraph, then CtrlAltK (Mac: CmdOptK, I
    think).
    If you want the paragraphs in pairs, create two paragraph styles. Style
    A has keep options set to start on a new page, and also, its Next Style
    is style B.
    Style B has no keep options, but it's Next Style is Style A.
    Select all the text.
    From the flyout menu of the paragraph styles palette, apply Style A
    "then next style."
    Now all paragraphs will be alternating -- style A, style B, style A, etc.
    Now do what I wrote initially, and you'll have pairs of paragraph in
    separate text frames.

  • Split one IDoc into two IDocs ?

    hello all,
    I wanna split one IDoc into two IDocs in XI?
    how can implement it?
    plx give some suggestions.
    thx in advance
    best regards
    Yaning
    Message was edited by:
            Yaning Liu

    Yaning,
    Please find the below blog for changing the ocurrences of IDOC
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    Best regards,
    raj.

  • Splitting the Company into Two Entities

    Our company is currently using SAP ECC, SAP SCM and SAP CRM. We have planned to split the company into two to manage the existing two different businesses in separate landscape. (i.e business A & B are operated under one company code). In future state, business A and B will be operated in separate landscapes.
    Has anyone carried out similar company split activities in the past? What are the challenges encountered in such a large transformation program? What are the key points to be considered in such transformation?

    Hi,
    That is one of the approach but it is very time consuming activity. Other thing I can suggest you to do the archiving of the data that is not required in the new landscape and then delete the data based on business process and other scenarios.
    Check below 2 links:
    http://service.sap.com/slo
    SAP Demerger
    Thanks
    Sunny

  • How to split a file into two small file

    Hi All,
              I want to raed a file from FTP server.Then i have to split a file into two small file.File format look like this.
             R01!service_order!item_guid!resource_guid!assignment_guid
             R02!Service_order!product_id!product_discription!quantity
             R02!Service_order!product_id!product_discription!quantity
             R02!Service_order!product_id!product_discription!quantity
    i want split file into 2 file,according to header and item details.one table containt header information (label R01) and second table containt (label R02).
    can anybody help me for this.how can i split into 2 file.
    Thanks
    Vishwas Sahu

    Create 2 internal tables. sat it_header, it_detail
    Check for 1st 3 characters and if it is R01 then send it into it_header and if it comes out to be R02 then send it to it_detail.
    Once done... You can either attach these tables into mail as two seperate files
    Or you can download each internal table using GUI_DOWNLOAD.
    Hope this helps!!
    Kanchan

  • How to split one monitor into two, differently configured desktops

    Hello,
    I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
    Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
    - one window/space on one side (say, on the left) of the screen would contain the document  from top to bottom, with no dock bar on the bottom
    - the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
    In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
    One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
    Is this possible? Can anyone recommend an application or type of setup?
    Thank you,
    -celso

    Looking for something like this?
    You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
    http://www.funk-isoft.com/index.php/display-maid

  • IMessage split conversations up into two threads

    I've got an iPad 2 and iPhone 4S running iOS 7. I've got an extremely annoying issue I can't solve. iMessage split conversations up into two threads. And sometimes certain messages never reach a device. Not syncing, how it fix it.
    Thanks.

    Settings>Messages>Send/Receive...look here for what addresses/number you have listed for "You can be reached at". Are they the same? Also, on each device, "Start New Conversations", are they the same?
    Also, you don't necessarily control how the sender chooses to contact you...email or phone number.

  • How to split invoice/document  into two venders?

    Can anyone please tell me how to split invoice/document into two vendors.  Like if I get an invoice for $1000 and it needs to be splitted between father and son, $500 to each.  How would I set that up in SAP?  I am not sure if this will be an invoice split or a document split.
    Thanks
    Monika

    If you are using an FI  entry F-43 to generate invoice this can be done by giving the same invoice ref. in the Inv. Ref. field  for two vendors. This is manual
    Document Split will split the document between two profit center and not between vendors.

  • ICal splits one event into two, how do I fix this?

    I have one weekly repeating event entered.  For the first two weeks it shows up like normal, as one event.  But two weeks later it splits that one event into two different side-by-side bubbles.  I did not alter the event.  Does any one else have this problem?  How can I fix this?

    That is because you are sharing an Apple ID.
    On both phones go to:
    Settings > Facetime > turn off iPhone Cellular Calls
    I would also suggest you check here to make sure your husbands number is not checked on your phone or yours on his:
    Settings > Messages > Send & Receive
    Settings > Facetime
    Otherwise you will get each others Messages and FaceTime calls.
    I recommend that you each get your own Apple IDs if for nothing else than iCloud, iMessage & FaceTime.

  • Splitting large video into smaller segments

    Is there a way to split a large iMovie Captured event into smaller segments/clips.
    Am attempting to convert my home videos ( Analog: 8mm) into iMovie clips.
    Used a ADS Pyro that converts my composite signal ( RCA: Yellow+Red/White) to a digital signal via Firewire using the iMovie capture. However, this creates a single 2 hour file that takes approx 26Gb because there is now DV information.
    I would like to (a) Break this into smaller segments/clips then (b) Change the date on these.

    Download MPEG Streamclip, which is free, from Squared 5.
    Drag your long clip into MPEG Streamclip.
    To split your video, move the playhead to your desired in point and type i. Then move the playhead to your desired out point and type o. Then File/Export to DV.
    For more tips, [see this post|http://discussions.apple.com/thread.jspa?threadID=2255575], especially numbers 9b and 9c

  • How to split XML document into two

    I want to create new docuemnt by taking part of the existent XML document under the node document_text
    vNodeList := xmldom.getElementsByTagName(vdoc, 'document_text');
    vNode := xmldom.item(vNodeList, 0); -- The xmldom.getNodeName(vNode) of this node is exactly what i am
    -- looking for
    vdoc:= xmldom.makeDocument( vNode);
    insert into cltab values (empty_clob()) returning cl into cl;
    xmldom.writeToClob(vdoc_txt, cl);
    But after that i am still getting the whole document tree, - copy of the whole document.
    What am i doing wrong? What functions should i use for this kind of task? xmldom.clonenode?
    Could you recommend any good description of the xmldom package?
    Thanks,
    Roman

    If you are using an FI  entry F-43 to generate invoice this can be done by giving the same invoice ref. in the Inv. Ref. field  for two vendors. This is manual
    Document Split will split the document between two profit center and not between vendors.

  • Split iPhoto Library into two?

    If one has an iPhoto Library that is too large to burn to a CD (or DVD), is it possible to split the iPhoto Library into two libraries?
    PowerBook G4   Mac OS X (10.4)  

    I used this method of duplicating the library, renaming, and then deleting appropriate rolls from the two resulting libraries. After doing so, however, my iPhoto applicaton developed some nasty quirks. First, it would not let me rename my rolls. Secondly, it would on occasion unespectedly quit. I do not know if this was a result of my duplicating/splitting libraries, or just bad karma. I tried correcting it by copying back my original iPhoto library from a backup volume, with no results. I repaired permissions, repaired disk, and ran DiskWarrior with no results. Finally, I booted from a cloned drive, checked that iPhoto worked properly on my clone, and then copied the iPhoto library from the clone to my main hard drive, and all was well. So, now I have a working iPhoto, but am stuck with my original large library. As I said, this may have just been an unpleasant coincidence, but I am afraid to attempt to split the library again.
    G5 Dual 2.0, 2GB RAM   Mac OS X (10.4.8)   also running IMac Intel 20/2

Maybe you are looking for