Each Document in Audit Log entry

Hi,
There is document library of name testdoclib in the site.
There are three files under the document library with names file1,.file2 and file3.
Users are downloading/viewing only file1,file2 files alone.
Now in the audit log entries,will i be able to view file3 entry as well?
In the audit log,will the entries be of files which are viewed/downloaded by the users?
Please share inputs on the same.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi Sudheer,
The log entries are captured for viewing, downloading or opening the document only or checked out or check-in.  In your scenario, file3 entry will not be there until and unless any of the above mentioned actions happened.
Please refer to the following article.
https://support.office.microsoft.com/en-us/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131?CorrelationId=d11e5086-013b-4416-a066-df51f22ff6fe&ui=en-US&rs=en-US&ad=US
Please don't forget to mark it as answered, if your problem resolved or helpful.

Similar Messages

  • Set to Upload Audit Log Entries into particular Library Programatically

    Hi,
    We got a requirement where need to set the Library to which the Audit Log needs to store.
    By default in OOB, we have option as Browse and Set the document Library for Auditing any Site/Web/List. But in SPAudit class we couldn't find any related Methods/Properties to which we can set where this Audit Log entry should need to happen.
    Could anyone help us asap.
    Dinesh Pulugundla, Microsoft Certified Technology Specialist.

    I don't know if that functionality is available programatically. My guess is SharePoint uses SPAudit.GetItems() or the SPAuditQuery class to query the
    events and outputs as a Excel (CSV) file to the library you specify.
    You could try recreating this process in your code.
    Jason Warren
    Habanero Consulting Group
    habaneroconsulting.com/Insights
    @jaspnwarren

  • Problem with the XI-Audit log entries in the table "XI_AF_MSG_AUDIT"

    Hi,
    I have an async-szenarios for PO:
    We send Idoc's from SAP ERP to a WebService via SOAP. And we take Ack's. We use Integrationsprocess with deadline block to catche the errors after the retrying (three times) and to send they via e-mail.
    Our problem is, the number of the audit logs in the table "XI_AF_MSG_AUDIT":
    In the RTW only we see one audit log (with three retries) in an error case. But in the table XI_AF_MSG_AUDIT there are about 76 entries for the same audit log in the error case and about 20 entries in the case of the succuessfull processing.
    This number of the entries in the table causes problem with the size of the redo log file and delete job of cours the large size of the table and therefore problem on the data base. The table can not be controlled. The delete job can not run and cancels every time due this redo log problems
    What can cause that?
    How can it be prevented, that so much entries are not be made in the  table "XI_AF_MSG_AUDIT".
    Best regards
    Gueltekin

    Hi Gueltekin,
    I am only aware of the general property auditLogEnabled of J2EE Engine Service SAP XI AF Core, which controls in general (default = true) that entries in the AF Message Audit log are written at all.
    (see [http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm])
    I assume that your scenarios in the error case is sending up to three messages and for each message the number of audit log infos are created. You might want to check the detailed entries in the log and see from where they are comming, you might use customer modules etc. as well.
    Best regards,
    Silvia

  • Adding entries in Audit Log Tab in Component Monitoring under Runtime Workb

    Hello Experts,
    I am trying to add my own audit log entries to the Audit Log Tab under Runtime Workbench -> Component Monitoring. I found this sap help link (http://help.sap.com/saphelp_nwpi71/helpdata/en/3b/6fe540b1278631e10000000a1550b0/frameset.htm) I am not sure if i am going in the right direction or not. But, when I tried to use the code in my User Defined Function in Message Mapping it gives me java error on PublicAPIAccess.
    Can anyone please let me know what am i doing wrong or if I am going in a totally wrong direction to achieve me goal.
    I am using PI 7.1 without EP1 and my example uses File adapter.
    Thanks!!

    Hi,
    if you are trying to add custom audit log for system monitoring in RWB in component monitoring, then i think it is not feasible........moreover for this thing, you can ask your basis guys to configure CCMS in your XI system to recieve alerts for your system.............
    if you are trying to add custom audit log msgs for your msg processing, then you should develop a custom J2EE adapter module and add your audit log entries in the process method of your adapter module..............
    Regards,
    Rajeev Gupta
    Edited by: RAJEEV GUPTA on May 6, 2009 7:12 AM

  • How to extract audit log data from every document library in site collection using powershell?

    Hi All,
    I have n number of document library in one site collection,
    My query is- How to extract audit log data from every document library in a site collection using powershell?
    Please give solution as soon as possible?

    Hi inguru,
    For SharePoint audit log data, These data combine together in site collection. So there is no easy way to extract audit log data for document library.
    As a workaround, you can export the site collection audit log data to a CSV file using PowerShell Command, then you can filter the document library audit log data in Excel.
    More information:
    SharePoint 2007 \ 2010 – PowerShell script to get SharePoint audit information:
    http://sharepointhivehints.wordpress.com/2014/04/30/sharepoint-2007-2010-powershell-script-to-get-sharepoint-audit-information/
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • Mailbox auditing log search only shows last 7 days

    I have mailbox auditing turned on for a mailbox, and the audit log age limit is set to 90 days.  When I run the non admin user access report however it only shows me auditing items for the past 7 days.  If i go to powershell, and run search-mailboxauditlog
    it shows the same 7 days. Any suggestions?

    http://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
    Mailbox audit logs are generated for each mailbox that has mailbox audit logging enabled. Log entries are stored in the Audits subfolder of the audited mailbox Recoverable Items folder. This ensures that all audit logs are available from a single location,
    regardless of which client access method was used to access the mailbox or which server or workstation an administrator used to access the mailbox audit log. If you move a mailbox to another Mailbox server, the mailbox audit logs for that mailbox are also
    moved because they're located in the mailbox.
    By default, mailbox audit log entries are retained in the mailbox for 90 days and then deleted. You can modify this retention period by using the
    AuditLogAgeLimit parameter with the
    Set-Mailbox cmdlet. If a mailbox is on In-Place Hold or litigation hold, audit log entries are only retained until the audit log retention period for the mailbox is reached. To retain audit log entries longer, you have to increase the retention period by
    changing the value for the AuditLogAgeLimit parameter, or export audit log entries before the retention period is reached.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Missing Audit Log of Adapter Engine in Message Monitoring

    Hi!
    I've a problem with a fresh installed PI:
    The Adapter Engine doesn't log anything in the Message Monitoring. The Integration Engine logs everything properly, but all entries from the adapter engine are missing. It looks like no message was processed by the AE, but in fact AE is processing the messages properly, only logging fails.
    What can cause this behaviour?
    Best regards,
    Daniel

    Hi Agasthuri,
    yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
    Hi Praveen,
    in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
    I checked the MDT, but there are also no messages displayed.
    End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
    Best regards,
    Daniel

  • Content of the Audit Log

    Hello,
    It seems that the text of the audit log is contained in table xi_af_msg_audit ins the J2EE schema under field text_key.
    If I access this key directly from the database it seems to be unnecessarily long, with a lot of blank space padding.
    Is it possible to control what is recorded in this field and hence what is displayed in the Audit Log?
    Kind regards,
    Peter

    You can simply use the AuditMessageKey class to write your own audit log entries. A similar code would be
    AuditMessageKey auditMKey = new AuditMessageKey(message.getMessageId(), AuditDirection.INBOUND);
              Audit.addAuditLogEntry(
                   auditMKey,
                   AuditLogStatus.SUCCESS,
                   "Custom Message");
    Regards,
    Prateek

  • Recording User's Log entry

    Hi!
    I'm the login page, I have acknowledgment checkbox. When the user checks the box it displays the User Name, Password and login button.
    I am trying to provide a means to create an audit log entry to record the user's acceptance or every time the user successfully logs in.
    Can anyone help me with this?
    Thanks,
    Bino

    ...from yesterday: Re: successful login return value
    Scott

  • CCMS and Security Audit log

    I have seen a huge number of companies who do not use SM19/SM20 or RZ20. It is not configured. example I worked for 3 clients(user base 14000, 16000,1000) and none of them have this configuration.
    Do you know why is it so if it is not configured at your place.
    Thanks
    Edited by: Pankaj Jain on Sep 26, 2009 7:02 PM

    Performance impact is dependent on the Hardware sizing and the daily monitoring activities together with the back up schedule by the BASIS team.
    My experience is: I have seen maximum of clients using this for logging activities of ALL users in the system. In other few cases, it is restricted to Super and Special users.
    Please go through the document: [Security Audit Log|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2088d9d4-e011-2a10-bba9-90548dbc2d6a&overridelayout=true] (it's a bit Old)
    Try searching Community with SM20 / SM19 / Security Audit Log search strings.
    Regards,
    Dipanjan

  • Delete Administrator Audit Logging

    How can the system administrator control the Administrator Audit Logging of the Exchange Server.. What I want to do is to check the audit logging ( for some users who get access for an email) and delete some specific operations ( Like search and granting
    access) .. also how can I delete the log directly? 

    Hi,
    Based on my research, to delete the audit log entries which are over 7 days, we can set the AdminAuditLogAgeLimit parameter. Thus, let’s firstly try to double check the property by the following command:
    Get-AdminAuditLogConfig | FL  AdminAuditLogAgeLimit
    If  the value is 02.00:00:00, let’s check if there is any error in the event log to narrow down the cause.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • TFS 2013 - Export Audit Log - API?

    Trying to use the new 2013 access audit log found on the "Access Levels" Admin web page to compare against list of users with MSDN accounts to ensure licensing compliance.  While I can manually export the access log to .csv per the built-in
    functionality, is the audit log accessible via the TFS API?
    Would like to automate, say obtaining audit log entries for the last 6 months ... within a PS script.

    Hi Jdlaw64,  
    Thanks for your post.
    The Export Audit Log shows all current users and groups information in TFS Server, it contains all the information of who accessed the TFS Server and when they did that, and it also shows what level of access that user or group has. We cannot get the entries
    from this log by date time(last 6 months).
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Mailbox Admin Audit Logs

    Hi All ,
    Could you tell  me how to clear Mailbox Admin Audit Logs for past days , i have disabled the audit logs for mailboxes but still i could able to see the information from ECP about last mailboxes accessed details also i've decreased the age limit
    of mailbox still the information were reflecting in ECP
    Set-Mailbox -Identity xxxx -AuditLogAgeLimit 0
    Confirm
    You've specified the mailbox audit log age limit of 0 for mailbox "XXXX". If you continue, all log entries will
    be deleted. This change takes effect immediately.
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [?] Help (default is "Y"): a
    - Sivashankar. Please mark as answer/useful if my contribution is helpful

    Hi,
    I tested in my lab, it is the same with your result. As a  workaround, since the mailbox audit log entries are stored in the Audits folder, we can MFCMAPI to delete the Audits folder which is a subfolder of Recoveralbe Items folder.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Audit log for document library

    Hi All,
    I have a requirement to generate a report for a document library which contains confidential “Policies”
     documents, this library exist under sub site. Now my clients wants a log report, which should give information like Who accessed/download/modified document?
    Please guide me
    MercuryMan

    You need to first enable menu audit log reports SharePoint 2010. Please follow the given below steps.
    1. Site Action > site settings
    2. Site collection features
    3.Click on the reporting  features
    4.Search for the Reporting feature 
    4.Click on Activate button
    Otherwise, you could try automate solution named Lepide Auditor for SharePoint (http://www.lepide.com/lepideauditor/sharepoint.html) which assists to generate  report and and provides the
    auditing data into real time. It gets real time alerts on detecting changes to users, groups, lists, libraries, folder and permission etc.
    Lepide - Simplifying IT Management

  • Write multi-language entries to central Audit Log

    Hi there!
    For my custom XI adapter module, I need to write multi-language log entries to the RWB Audit Log. Therefore I created some resource bundle files with my message texts.
    But at runtime of my module, I cannot know the language of the user, who accesses the log via his web browser.
    Is there any possibility to provide custom resource bundle to the central audit log?
    Thanks in advance!
    Matthias

    Matthias,
    The idea behind using various resource bundles will work fine when you would detect the Locale of the user accessing RWB and load appropriate resource bundle. In most of the web applications based on Java this would be done automatically and you would not need to write exlplicit code for this but the Audit logs that you write from your adapter module would most probably be persisted to the database. At the most you would be able to persist the appropriate language messages by detecting the default locale in adapter module and retrieve values from corresponding resource bundle. Rest, your standard message display tool UI is automatically displayed in the appropriate language your browser sends to the server.
    Hope this helps.
    -- amol

Maybe you are looking for