ECR/ECO Workflow not working for multiple Objects

Hello all,
We have implemented ECR/ECO workflow by customizing the SAP standard one. We are facing a problem when entering multiple ECO objects such as mutiple Documents, materials, BOMs etc. When we create the ECR, two parralel workflow start (one for ECM and other for ECO) and depending on how many ECO objects we have included, multiple instances of ECO workflows will trigger (I think this is the standard behaviour as well but not sure)
In our workflow, we have a wait step in ECO workflow that waits until ECM has been converted into ECO (ECOP status) and starts the ECO workflow. Also, we have created a Wait step in ECM workflow and that waits until the ECO workflows have reached the CONFIRMATED Step when the processing of the objects are finished.
When we enter one object, both workflows start and ECO waits until ECM has been converted into ECO and then start the processing the Objects. when the ECO workflow is done (Status confirmated), it switches back to ECM workflow and then goes on with Close/Release steps of the Objects/ECO etc.
But, when we have multiple ECO objects, both start well as ECR converts to ECO and the ECO starts and then work items are processed but then stops just before the CONRIMATED steps even though all objects are changed/maintained properly and ECO workflows are completed. As a result, the control doesn't refer back to ECM and we never get the ECO close and Release step work items.
I have checked SWETYPV, SWEL, business objects ECM and ECO but nothing gives a result..
Any help would be appreciated..
Thanks

Can you please update on what is the status in the workflow log. You can check this from SWIA tcode.
If it is in process step please check for ST22 dump if any.
Thanks
Arghadip

Similar Messages

Workflow not working for multiple line items

Hi gurus,
we are working on ECN/ECO workflow.
Once ECN is created in CC01, our workflow triggers.
we are calling subflow from main WF for enhancing the materials of the Engineering change number(ECN).
Subflow will take the material to different departments for enhancing the views like,
Purchasing views by purchasing dept,
quality views by quality dept,
sales views by sales dept,
etc.
This whole process is working fine, if there is single material number in ECN.
But, if there are 2 material numbers, the control is not returning back to MAIN WF from Subflow.
do we need any config/setup to make it work. (we are using block while calling subflow).
Any help will be of gr8 use.
rgrds.
santosh.

Can you please update on what is the status in the workflow log. You can check this from SWIA tcode.
If it is in process step please check for ST22 dump if any.
Thanks
Arghadip

Triger extract is not working for USERDETAILS object.

Dear MI experts,
I am doing custom client integration. In that we have faced a problem.
Trigger extract is not working for USERDETAILS object in SWCV SAP BASIS 7.10.
1. I have assign the SWCV SAP BASIS 7.10, user define SWCV to device.
2. I have checked the SMQR all queues(extract queues) are in register mode.
But if I delete the users and reassign the same user, then it is sending deletes and insert to the outbound queue.
please help to resolve the issue.
Regards
lakshman balangu

Dear ananth,
Thanks for ur replay.
Actually as soon as the device is registered, automatically the USERDETAILS and USER_AUTHORIZATION Objects should
go to the Outbound queue from the pending extract
I have tried what you have suggested.
1.I have taken device which is in initial state and I have assigned the 'user' and 'user define SWCV'.
2.I have register the devices with my custom client. After that also SWCV SAP BASICS 7.10 not become operational and automatic extract not happend for USERDETAILS.
my doubt is, any thing i need to send from client to make SWCV SAP BASICS 7.10 operational?
(or) is it problem with system?
Regards
lakshman balanagu

F1 help not working for J2EE objects

Hi,
I love the F1 help that takes you to the JavaDoc. However, it doesn't seem to
work for J2EE objects (only J2SE). However, workshop does know about J2EE objects
because the function completion stuff works.
The "J2EE Javadoc location" in IDE Properties is set to http://java.sun.com/j2ee/1.4/docs/api/.
I also changed it to my local install of the Javadoc. Still no satisfaction.
Anyway to get this working?
Thanks,
Phil

Raj,
Thanks for the service pack clarification.
Any ideas why the F1 for J2EE is not working?
Is anyone else having this problem?
It seems to be using the J2SE javadoc location instead.
Thanks,
Phil
"Raj Alagumalai" <[email protected]> wrote:
Phil,
The installation you have is WebLogic Platform 8.1 GA, which contains
WebLogic Server 8.1 sp1, which is why the next service pack will be called
Service Pack 2.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Phil Grimm" <[email protected]> wrote in message
news:[email protected]...
Is there an SP1 for Workshop? The build I have (in Help | About) showsBUILD: 2003.0710.190003).
Is there a newer build? I have not been able to locate a download.
One file you can try is LoginBacking.java in{sampleportal}/WEB-INF/src/examples/login.
Postion on "HttpServletRequest" and hit F1 goes to the J2SE javadocand
displays
java.lang.Object. It's not going after the correct javadoc file.
Phil
"Raj Alagumalai" <[email protected]> wrote:
Phil,
I have tested JE22 objects and have not had any issues. Can you attach
a
file where F1 help fails ?
Regarding F1 help for weblogic API's they will be available in Service
Pack
2.
Hope this helps.
Regards,
Raj Alagumalai
WebLogic Workshop Support
"Phil Grimm" <[email protected]> wrote in message
news:[email protected]...
Oh, it would be nice if F1 would work for BEA APIs. Is this possible?
Even more cool would be if we could configure it to point to API'sof our
own
or others like Struts, etc.
If this is not possible, please consider this an enhancement request:)
Phil
"Phil Grimm" <[email protected]> wrote:
Hi,
I love the F1 help that takes you to the JavaDoc. However, it doesn't
seem to
work for J2EE objects (only J2SE). However, workshop does know
about
J2EE objects
because the function completion stuff works.
The "J2EE Javadoc location" in IDE Properties is set to
http://java.sun.com/j2ee/1.4/docs/api/.
I also changed it to my local install of the Javadoc. Still nosatisfaction.
Anyway to get this working?
Thanks,
Phil

SelectManyListBox is not working for Integer Objects in Jsf

hi,
In JSF selectManyListBox is not working with Integer objects it is working only with String Objects. It is showing the error "value is invalid" can anybody please send me sample code snippet regarding this.

The javadoc of UISelectMany.validateValue() says:
In addition to the standard validation behavior inherited from UIInput, ensure
that any specified values are equal to one of the available options.
So, you should take care that the submitted values are equal to one of the
options. Note that an Integer is never equal to a String.
Show your codes to us.

EXIT_SAPLV50E_001 User Exit is not working for multiple plants case

Hi,
I have to update foreign trade data in Invoice during invoice creation using VF11. For that, I have written code in EXIT_SAPLV50E_001 and updated segal value. This functionality is working fine, if I have a single plant in an invoice. But customer has scenario where they can have multipl plants in an invoice.
For multiple plants in an invoice, this EXIT_SAPLV50E_001 is not called.
I am unable to find another better place where in I could place my code. Please help. Remember, case in multiple plants.
Will be rewarded.
Regards
Arpit

Hi Arpit,
               Please use below mentioned user exit in T-code VF11
he following user exits are available for tcode VF11
Exit Name           Description
SDVFX001            User exit header line in delivery to accounting
SDVFX002            User exit for A/R line in transfer to accounting
SDVFX003            User exit cash clearing in transfer to accounting
SDVFX004            User exit G/L line in transfer to accounting
SDVFX005            User exit reserves in transfer to accounting
SDVFX006            User exit tax line in transfer to accounting
SDVFX007            User exit: Billing plan during transfer to Accounting
SDVFX008            User exit: Processing of transfer structures SD-FI
SDVFX009            Billing doc. processing KIDONO (payment reference number)
SDVFX010            User exit item table for the customer lines
SDVFX011            Userexit for the komkcv- and kompcv-structures
V05I0001            User exits for billing index
V05N0001            User Exits for Printing Billing Docs. using POR Procedure
V60A0001            Customer functions in the billing document
V60P0001            Data provision for additional fields for display in lists
V61A0001            Customer enhancement: Pricing
J_3RSINV            Customer enhancement: Pricing
or You can use BADI
BADI_SD_SALES_BASIC
BADI_SD_TO_FM
BADI_SD_BILLING
Regards,
    Thangam.P

Calculation formula userexit not working for multiple condition types

Hi,
we have a problem in the CRM ISA-B2B scenario where the custom user exit is only working for single condition type.
but we need it for multiple condition types .
the value of the subtotal is not being retrieved for multiple conditions. at a time only one condition value is being retrieved and shown in the webshop - shopping basket.
for ex:
we have scenario 1 where Y001 -Freight condition type is applicable for one customer.and Y002 is applicable for another customer.
when we are trying to show the subtotal condition value in the webshop by using a single custom user exit in the pricing procedure it is only working for either of the above 2 customers depending on the VMC cache status.
is there any problem if use the single user exit for both condition types?
and if it needs to be differentiated how exactly we can do that with the same logic in the java class.
Thanks in advance,
PSR.

Hi Arshi,
below is the code:
public class ZValFormula_ZZWI1 extends ValueFormulaAdapter {
     private static String zzwi = "ZZWI1";
     private static char zzwiC = '@';
     private static UserexitLogger userexitlogger = new UserexitLogger(
     ZValFormula_ZZWI1.class);
     public BigDecimal overwriteConditionValue(IPricingItemUserExit item,
               IPricingConditionUserExit condition) {
          ICurrencyValue val = condition.getConditionValue();
          userexitlogger.writeLogDebug( "value saved for " + zzwi + " (" + zzwiC + ") = "
                    + val.getValueAsString());
          item.setSubtotal( zzwiC, val.getValue());
          return val.getValue();
hope this would give more idea to look at the problem.
Thanks,
PSR

Workflow not working for users across domains

Hi,
The workflow that i have created works perfectly for me, but they work intermittently for my colleague who sits in another country and hence domain.
They sometimes work for him, when he creates a new item but they don't work most of the time and below is the error that he gets.
RequestorId: 38647461-0f47-8efc-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException:
HTTP 404 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["48"],"SPRequestGuid":["38647461-0f47-8efc-8848-9c92f6979b64"],"request-id":["38647461-0f47-8efc-8848-9c92f6979b64"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Fri, 13 Feb 2015 18:57:19 GMT"],"Server":["Microsoft-IIS\/7.5"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)
Please help me to resolve this issue. I need your guidance.
Thank you !
Kind Regards

Hi Bruno,
Thanks for your response.
I'm not much in to SharePoint. Me and my colleague have just front end access to the site, we can't access the server. We both are SCA on the site. We are just geographically apart.
All we can do is "SharePoint Branding". Does this make any sense ? Sorry if couldn't give you much information.
I designed some SP2013 workflows and they don't always work for my colleague. When i go to Designer -> All files -> workflows, i don't see any of my SP2013 workflows, i see only SP2010 Workflows.
I will try to contact the team that has got the server access and will convey them your inputs.
Kind Regards

2013 Workflow not working for tenant admin

Hi
I've been struggling with an issue developing a site for a client. They have their own SharePoint 2013 tenancy, which we can manage as a partner. I can log in to the site with my own company account linked to Office 365, and can do everything I need to in
terms of site administration.
However, I've run into a problem whereby although I can create and publish SharePoint 2013 workflows, I cannot run them successfully. If there is anything in the workflow such as writing to the history list, the workflow hangs with the status "Started"
and "Activity in progress" (no error message).
I've got around the problem by testing the workflow as a user from our client's tenancy, but I'm curious as to why my user doesn't work for this. It works fine for everything else, including SharePoint 2010 workflows. Is there some permission somewhere that
needs to be set, or is this by design?
Duncan

Hi Ganesh,
Based on your description, I recommend you verify the things below:
Check if the SharePoint search service account is added in the Windows Authorization Access Group in Active Directory.
Check if the non-admin users have permission to view the results searched.
Check if the inline search can work in lists’ pages or libraries’ pages.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

3.4: keyword auto-completion not working for multiple levels

Auto-completion does not work with higher level keywords, which used to work in LR 3.3 (IIRC).
Example:
I enter in the "Click here to add keywords" field:
"He" then LR tries to complete the keyword by showing keywords starting with "He". Fine.
But this is a keyword which does not exist so far, so I enter "Heldenplatz > W" because I want to have sorted it under Wien. If I'm not mistaken, LR 3.3 showed after entering the "W" a list of existing keywords starting with W (auto-completion for the one level higher tag). This is not the case anymore. I have to enter "Heldenplatz > Wien" completely, which makes it slow and error-prone.
Am I mistaken or can you reproduce it?
Cheers

GaryRowe wrote:
How can it be, after all this time, that they still do not have effective regression testing in place ? Any sane development team (who wants to remain sane ;-) builds this as a priority ... unless they aren't given the resources?
I think (don't remember though) that this never worked, so regression testing would not have helped.
What is really to worry, that features aren't consequently and completely implemented (and tested). With a new option in Lightroom 3, Adobe has offered support for keywords with spaces. It seems that this feature as neither been thoroughly analysed or implemented. Thus, we face the currently inconsequent support of it:
keyword completion only works with the first entered word, but when you enter a complete keyword hierarchy using the ">" letters
filtering seems to have problems too

HT2486 Smart Group not working for Multiple 'Not a Member of' Options

I am trying to go through my contacts and assign everyone to a group. I want to create a smart group whose criteria is "not in Group 1" AND 'Not in Group 2'.
This does not work. It simply gives me all the contacts.
Also, is there anyone to see a contact and know to which groups they belong. When I can't remember who someone is, it is helpful if I know what group.

I have a different conclusion : for me, it works since 10.9 where it has never worked before (and I just checked it still works with 10.9.1) !
I did not modified my groups, they simply started to work properly with 10.9.

Is join field value does not work for Custom object 4 to 15

Hi Everybody
I have Custom object 7 as Related Information to campaign object. I want to pull data from campaign to Custom Object 7. I tried with join field value function, but i am getting error.
Is Custom object 4 to Custom Object 15 not exposed with join field value function.
Can we pull data from child to parent or it is always other way ????

Hi,
JoinFieldValue is not supported in Custom Object 04-15.
Thanks & Regards
Sablok

Shared Libray UDF does not work for all objects

I have created a shared UDF Library and am successfully using the code in other mappings.
however when i am trying to apply the code to two new mappings, the code does not work! there is nothing special about the code. just get the MessageID.
public String GetMessageID(Container container) throws StreamTransformationException{
//This UDF gets the PI message ID
String constant;
java.util.Map map;
map = container.getTransformationParameters();
constant = (String) map.get(StreamTransformationConstants.MESSAGE_ID);
return constant;
it works when i enter the messageID in graphical mapping, but when i test end to end, it does not work!
and as i mentioned, it works in two other interfaces... but not in the new one!
any thoughts?

after applying the latest patches it seems to have corrected iteslf

Search spec not working for Multiple Business Object in Siebel

Hi,
In Siebel Applicaiton Specified Search spec in Administration - BI Reports->Standard Templates-> integtion Object. the Specified Search spec is not returning particular record. It's seems returning all records. below we are using search spec as [Row Id] = [Quote.BillingaccountId].
for testing purpose specified how code value : [Row Id]='1-wXR8'(some BillingaccountId in our application from Quote Object).
Does anybody worked on Searchspec for MultipleBusienssObjects and is the search spec syntax is correct.
Thanks
-Chakri

Hi Ravi..
thanks for replay. with SR you provided getting no search results. If you have already can you please email me at [email protected]
And also mention format as IO1.Field1=IO2.Field2. Need to give IO.fieldname i.e Integration Object Name .Field name or IC.Fieldname.. Can you please correct.
Thanks
-Chakri

LookUpSet is Not working for multiple columns in SSRS 2008 R2

Hi Friends,
I have a problem when i use more than one LookUpSet in SSRS to display more than one value based on Day Number & other fields..Please find the below details and please suggest me a solution for this.
Crystal :
  Day1 Day2
Period 4 Arts,Maths Arts,Maths
For this in SSRS i am using LookUpSet as below based on StaffID,PeriodNumber & DayNumber like this:
= (IIF(Fields!DayNumber.Value=1,Join(LookupSet(Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!ClassCode.Value
, "TIMSTF5"), "," ),""))
which is displaying correct in SSRS,But when i use the same expression to display Day 2 classes it is returning empty even though i have values on Day 2.Please have a look at the SSRS output below:
  Day1 Day2
Period 4   Arts,Maths
Day 2 Expression is :
= (IIF(Fields!DayNumber.Value=2,Join(LookupSet(Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!ClassCode.Value
, "TIMSTF5"), "," ),""))
I am not sure why it is not liking to use more than LookUpSet in the same report,Please suggest me with a work around for this.
Thanks in advance,
Sam.

Hi Guys,
I have sorted out the problem.Solution for the above problem is use Max before the expression like below, since it has multiple days and periods in the Dataset.
= Max((IIF(Fields!DayNumber.Value=2,Join(LookupSet(Fields!StaffID.Value & Fields!PeriodNumber.Value & ields!DayNumber.Value
, Fields!StaffID.Value & Fields!PeriodNumber.Value & Fields!DayNumber.Value
, Fields!ClassCode.Value
, "TIMSTF5"), "," + vbcrlf),"")))
Thanks,
Sam

ECR/ECO Workflow not working for multiple Objects

Similar Messages

Maybe you are looking for