EDI Outbound B2B - Are ST and SE segment values created by B2B

Hi,
I have created a BPEL-B2B outbound EDI sample process
Document is 850
Here BPEL is successfully giving file to B2B
But B2B is erroring with below
Segment ST((N/A)) at guideline position 010 is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 0
Are ST and SE values to be populated by BPEL (i mean while developing the process should we assign these values) or should B2B create these values
I had assigned some constant values in BPEL, but still I get the above error
Please advise
Thanks
Sachin Sutar

Hi Sachin
You can take a look at the file Acme_850.xml which can be found in B2B under the path ORACLE_HOME\ip\tutorial\X12\runtime
The error could be due to the fact that the hardcoded values you have entered in BPEL are not as per the expected values. The entry in Acme_850.xml are as follows
<Segment-ST>
<Element-143>850</Element-143>
<Element-329>#ControlNumber#</Element-329>
</Segment-ST>
<Segment-SE>
<Element-96>220</Element-96>
<Element-329>#ControlNumber#</Element-329>
</Segment-SE>
Hope this helps.
Thanks,
--Arun

Similar Messages

EDI Outbound 855 Error Code:AIP-51505 Unable to create outbound file

Hi,
I am facing some issues while processing EDI Outbound 855.
I am getting error in B2B . I have checked ECS and XSD. There is no mismatch
Error description: Extra elements were found in the data file as part of Segment PO1 at guideline position 010.{br}{br}This error was detected at:{br}{tab}Segment Count: 3{br}{tab}Element Position: 5{br}{tab}Characters: 1388 through 1390
Can any one give me some resolution for this one.
Regards,
Rao

Hello Rao,
It appears from your previous post,
1. This issue is there only for one Trading Partner.
2. You have already validated document against XSD and also XSD is generated from the ecs which is getting used, transaction set ecs does not contain envelop details.
Please do the following.
1. Please make sure you have not overridden transaction set ecs as part of operational Capability.
2. Please send us the b2b.log in DEBUG mode along with ecs and payload(XML) which will help us to identify which segment is extra in it.
Rgds, Ramesh

EDI Outbound IDOC Remove unused fields from segment

Hi All,
I am configuring a outbound idoc scenario for Message type ORDERS. The basic type for this message type is ORDERS05.
The segment E1EDKA1 has 44 fields, I need only the first field and the last field of this segment.
How do I remove the unused fields in this segment ? I Tried BD56 and BD32 But they are for removing the complete segment and so does not serve my purpose.
Any pointers to this issue is appreciable .
Regards,

Hi,
Segmetns of standard message types can be deleted from BD53. But I don't think deleting fields would be possible from segments of standard idoc type. What you can do is you can create your own custom idoc type with the fields you want and allign it with the standard message type ORDERS. This should solve your purpose.
BR,
Atanu Mukherjee

ICM 7.5-how to get individual outbound dialer calls talktime and respective ECC values

Hello,
I'm looking for following two items
1. Outbound dialer calls talktime in each call.
2. Each calls respective ECC values.
I have tried to get talktime from TCD table it’s shows zero value.
Please advice how to get above values, it would be much appreciated.
Thanks
Regards,
Param

Hey Param,
You can use the PeripheralCallType in the TCD table to find dialer calls. Look for calls with:
PeripheralCallType IN ('27','28','29','30','31') for reservation calls and
PeripheralCallType IN ('32','33','34','35') for the customer calls
For duration of reservation calls look at the HoldTime value
For duration of the customer call you can look at the HoldTime + TalkTime + WorkTime for a total handle time for the customer leg of the dialer call
If you want to look at the ECC variables that were associated with that call you will have to lookup the Termination_Call_Variable table matching:
Termination_Call_Variable.TCDRecoveryKey = Termination_Call_Detail.RecoveryKey
Cheers,
Nathan

Missing UNB and UNZ segments in D95B Codeco EDI Schema!

Hello,
I need to use the D95B Codeco EDI Schema in a map but the UNB and UNZ segments are missing from this schema. I read on the net that these segments have to be added in the pipeline using EDI Schema extensions and/or envelopes. How do I go about adding these
two segments to the shipped EDI Codeco schema without invalidating it?
Thanx a lot for your answers.

Hi BizTalkler,
As per your request have composed article (divided in three parts as it was too long) and helper class in this case is bit different as have considered subelement values as well (which was not in EDI X12), below are links:
BizTalk Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping - Part 1
BizTalk Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping- Part 2
BizTalk Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping- Part3
EDIFACTSegmentValueFetcher Helper Class
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping

How to generate CTT and AMT Segments - PO_4010_850

Hi,
Please let us know how can we have B2B generate CTT and AMT segments for PO_4010_850?
We are passing the 850_XML from BPEL process to Oracle B2B. Would like to know how can we get the CTT and AMT segments generated?
CTT 01 - Number of Line Items - Number of PO1 segments in the transaction (PO)
Do we have to count the number of PO1 segments manually in the BPEL XSL or do we have some macro already in place (Like we have for SE 01)?
AMT 01 - Total Monetary Amount (Qualifier Code) - What all values can be passed and how to generate it?
AMT 02 - Amount in Total for all the line items. - How can we calculate this?
Thanks
Priyanka

Oh. So there is no macro already present for this.
I have to count the PO1-Segment to get CTT-01. Have to Count all the Line Amounts for AMT02. But how about AMT01?
Thanks
Priyanka

Create Individual Idocs Based on Parent and Child Segment type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on parent and child Segment Type
For example If 3 child segments are same and 1 segment is different under parent segment then 3 same child segments are clubbed and create single idoc under parent segments and 1 different child should create in individual idoc under parent segment.
Note : Same logic should work for N number of Parent Segments and Child Segments.
Outbound:
ZIdocName
Control Record
Data Record
Parent Segment A
   Child Segment 1
   Child Segment 1
   Child Segment 1
   Child Segment 2
Parent segment B
   Child Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Parent segment A
Child Segment 1
Child Segment 1
Child Segment 1
Status Record
ZIdocName
Control Record
Data Record
Parent segment A
Child Segment 2
Status Record
ZIdocName
Control Record
Data Record
Parent Segment B
Child Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.
Ram

Hello,
Segment won't hold any value, so filter criteria should be there on some field wich exist in Parent node and chile node?
Paste ur XML?
Try this(Assuming u have some fields in parent/child segment on which u want to define filter criteria):
Parent Field--UseOneAsMany----RC----
                                  ------------------Concat ----splitbyvalue(value change)--collapse context --- ZIdoc
Child field-- RC----------
Child field--RC--splitbyvalue(valuechange)--CC -Splitbyvalue(each value) -- ParentSegment
Child field--RC--splitbyvalue(valuechange)--- ChildSegment
RC -> Remove Context
CC - Collapse Context
Note - i haven't tested ur mapping, so make sure to adjust context in mapping
Thanks
Amit Srivastava
Message was edited by: Amit Srivastava

Get Intercharge Segment Values inside Orchestration (IS13)

Hi
Can anyone please let me know how to get the ISA and GS segments of X12 interchange inside biztalk orchestration.
The scenario is i have to insert into a log table the X12 files i sent to the client. I have to insert the ISA and GS segments into that log table, but these are generated at the (send pipelines) which are at send ports.
Is there any way to log the Interchange control number.
Thanks in advance.

Hi Shivakumar,
I have written an article on how to fetch ISA and GS Segment, have a look at it BizTalk
Server 2010: Fetching ISA and GS Segment Values From Interchange Envelope and Mapping
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Outbound EDI X12 document with multiple ST transactions segments

Hello all.
I am STILL using Oracle B2B 10.1.2.3 MLR 16 and need the ability to send outbound transactions (EDI X12 856 4010) with one ISA envelope and multiple ST segments. When I enqueue the 856 to the IP Out queue with multiple ST's, B2B does not generate unique ST Control #'s and the segment count is doubled for the second ST loop. Is it possible to get an accurate segment count with the MACRO's?
If this is not possible, will someone please help me understand the batching process. I have followed the instructions in the B2B_TN_012_EDI_OutBound_Batching.pdf file, but I am getting very generic null pointer errors in B2B.
Any help will be greatly appreciated.
Thank you.
Nick Graves

Hello All.
I am desperate for some help with batching. I cannot get the count/ID based batching to work or the time interval batching to work. I recveive the following error message with batch ID based batching:
Error -: AIP-50014: General Error: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1260)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2549)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2482)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:530)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:376)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:107)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingBatchRequest(Request.java:1445)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1239)
     ... 5 more
Time interval batching produces this error:
Error Brief :
Duplicate transaction node GUID encountered.{br}{br}This error was detected at:{br}{tab}Segment Count: (N/A){br}{tab}Composite Position: 0{br}{tab}Sub-Element Position: (N/A){br}{tab}Characters: 0 through 0
Duplicate transaction node GUID encountered.{br}{br}This error was detected at:{br}{tab}Segment Count: (N/A){br}{tab}Composite Position: 0{br}{tab}Sub-Element Position: (N/A){br}{tab}Characters: 0 through 0

Outbound delivery and profitability segment

Hi experts,
I have a question. When I create from sales order outbound delivery (transaction code VL01, VL02) with one item, I want create next item in outbound delivery (e.g. palette), but this item have not profitability segment. How can I fill this profitability segment with same characteristics like the item, which originated from sales order? I don´t want this new item in sales order, only in outbound delivery.
Thanks a lot
Gustavo

Hi,
i created charakteristic MAGRV and and assign to operating concern Data structure. I create outbound delivery from sales order with one item, in outbound delivery i created then second item with material - Packaging Materials MARA-MAGRV but the profitability segment is not again modifiable... When i Post goods issue SAP give error massage "Account 542000104 requires an assignment to a CO object" i need profitability segment.....
Gustavo

Blocking Outbound Calls by Area Code and Time Zone

I am looking to block agents from making outbound calls to certain time zones by area code. Can't quite get my head around how I can use route filters with time schedules. Any help would be appreciated.

Create the route patterns for those area codes and then configure one which allows the calls, and another one that blocks the calls, use TOD to enable/disable them as required.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

EDI outbound error

Hi All
we are working on EDI outbound messages and facing the following error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">APPLICATION_PROGRAM_ERROR</SAP:Code>
<SAP:P1>Z_ABAP_MAPPING_IDOC_TO_FLAT</SAP:P1>
<SAP:P2>SAP-ABAP</SAP:P2>
<SAP:P3>UNCAUGHT_EXCEPTION</SAP:P3>
<SAP:P4>Program Z_ABAP_MAPPING_IDOC_TO_FLAT===CP Include Z_ABAP_MAPPING_IDOC_TO_FLAT===CM001 Line 1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error in mapping program Z_ABAP_MAPPING_IDOC_TO_FLAT (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
How can i solve this error.
Regards
Ashwin Kumar

HI Ashwin
I think this exception you need to catch it in the ABAP..
This may help u- http://help.sap.com/saphelp_47x200/helpdata/en/55/bff20efe8c11d4b54a006094b9456f/content.htm
just cross verify with this guide-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

EDI file Mapping.. problem with UNT segment..!!

Hi all,
Anyone who worked on EDI files, pls help me..
Doing Idoc to EDI scenario..
I done for all the mapping for all the fields except for the UNT segment and field D_0074
Here i need to provide no of segments in the EDI file...
like
*UNBUNOA:393777:ZZ93139:ZZ080108:09080+++1'
UNH0000016334368DESADV:D:01B:UN:EAN007'
BGM3510094147783+9'
DTM+137:200801080934:203'
DTM+11:200801080934:203'
DTM+17:200801100000:203'
ALI++168165'
RFF+ON:R-08007E'
DTM+171:20080107:102'
NADSU377996::92'
NADST9418GR::92'
CPS1+5'
PAC9+09::9'
MEAPDAAA+KGM:6306.628'
MEACTNPP+NAR:9'
CPS21+3'
PAC109::9F:CHEP'
MEAPDAAA+KGM:256.828'
PCI+33E'
GINAW393100471000832922'
LIN1+19310047208023:SRV'
QTY+12:44'
DTM+36:20090505:102'
CNT+2:2'
UNT240000016334368'
If you observe the above file which is my resultant file.. I need to count all the segments above UNT and pass the value( here total segments are 24) to D_0074 field .
Is it any way we can count all the segments.. and pass the value??
Kindly suggest me ..
waiting for your replys..
Regards
Seema.

Problem here is ..
They have created only SCv Seebutger_EDI_Adpater
but they haven't created for Seebutger_GENERIC_EDI ..
all those mappings will be under Seebutger_GENERIC_EDI .. which they haven;t installed..
thats the problem..
If any one has that UDF .. kindly let me know..
-Seema.

How to use the b2b to send and recieve HL& message without SOA Composite

Hi Guru's
We are doing HL7 transactions at our end. We have following use case
Inbound partner gets the HL7(ADT) message and then without any transformation we wan't to send the message to another partner ( set up in the same b2B). I understand I can do this way
b2b--> SOA Composite--> B2B
but we don't want to use the SOA composite here as it is simple passthrough ( i.e no transformation of data is done).
I understand B2B when it gets the message puts in IP_IN_QUEUE
Can b2b( remote tp) read directly from IP_QUeue and send it.
I mean it has this strcuture
Inbound tP--> HOST--> Outbound TP
by doing this we will have no need to create the SOA composite. I hope this should be possible. I tried using the listening channel but outbound TP did'd got any message. Can you please guide me in all the steps I need to follow in order to set this up?
Any pointers will be highly appreciated as this will eliminate the SOA composite from the picture.
Regards
Sahil

Hi Sahil,
Yes, it can be done using HUB mode implementation. Please refer -
http://blogs.oracle.com/oracleb2bgurus/entry/implementing_oracle_b2b_11g_as
A sample configuration is also provided there (for HL7 itself).
Regards,
Anuj

EDI outbound

I am doing a EDI outbound for purchase order using
message type as ORDERS
Idoc type as ORDERS05
My scenario is as such, a flat file will be having text information and IDOC number and I need to add the outbound idoc with this text information provided in the flatfile for the corresponding IDOC number in the file.
My issue is that how to add information in the file to generated IDOC .

Hi Shreya,
It seems you need to go for an idoc extension.
Extenbd the idoc and populate the extended segments by using the user exits in the outbound function module.
Visit this link for more info:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi

EDI Outbound B2B - Are ST and SE segment values created by B2B

Similar Messages

Maybe you are looking for