Outbound EDI X12 document with multiple ST transactions segments

Hello all.
I am STILL using Oracle B2B 10.1.2.3 MLR 16 and need the ability to send outbound transactions (EDI X12 856 4010) with one ISA envelope and multiple ST segments. When I enqueue the 856 to the IP Out queue with multiple ST's, B2B does not generate unique ST Control #'s and the segment count is doubled for the second ST loop. Is it possible to get an accurate segment count with the MACRO's?
If this is not possible, will someone please help me understand the batching process. I have followed the instructions in the B2B_TN_012_EDI_OutBound_Batching.pdf file, but I am getting very generic null pointer errors in B2B.
Any help will be greatly appreciated.
Thank you.
Nick Graves

Hello All.
I am desperate for some help with batching. I cannot get the count/ID based batching to work or the time interval batching to work. I recveive the following error message with batch ID based batching:
Error -: AIP-50014: General Error: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1260)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2549)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2482)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:530)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:376)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:107)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingBatchRequest(Request.java:1445)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1239)
     ... 5 more
Time interval batching produces this error:
Error Brief :
Duplicate transaction node GUID encountered.{br}{br}This error was detected at:{br}{tab}Segment Count: (N/A){br}{tab}Composite Position: 0{br}{tab}Sub-Element Position: (N/A){br}{tab}Characters: 0 through 0
Duplicate transaction node GUID encountered.{br}{br}This error was detected at:{br}{tab}Segment Count: (N/A){br}{tab}Composite Position: 0{br}{tab}Sub-Element Position: (N/A){br}{tab}Characters: 0 through 0

Similar Messages

  • HP Officejet 6500A How do I scan a document with multiple pages into one file?

    HP Officejet 6500A Plus e-All-in-One Printer - E710n
    Windows 7 (64 bit)
    How do I scan a document with multiple pages into one file?  My old printer (psc 2110) asked after each scan if I wanted to scan another page.  At the end I had one pdf file with multiple pages.
    This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
    This question was solved.
    View Solution.

    Hi mpw101,
    If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Word document with multiple sections generates multiple pdf?

    Hello everyone,
    I'm a new and happy Mac user, but not fully able to use this. I hope you can help.
    I have a Word document, with multiple sections that I want to convert into pdf. When I used to do this with the PC, I didn't have problems. I used to use Click to Convert and I normally used to get one single pdf file.
    Now, using the pdf button wit the Mac, I get separate pdf files, one for each section. Is there a way that I can create a single pdf, with all the sections in order? If not, how can I merge the pdf in one single pdf file?
    Thanks in advance.

    Hi,
    just to let you know I have sorted this.
    http://macintoshhowto.com/leopard/how-to-merge-pdf-files-with-preview-in-leopard .html
    Thanks.

  • Billing Documents with multiple mailing address

    Experts,
    What are all the standard options to generate SD billing documents with multiple mailing addresses. Billing document contents will be same but they will addressed to different mailing addresses.
    Have you come across this situation and implemented? Please let me know you expert advide.
    Thanks much,
    Nagarajan

    I assume that
    multiple mailing addresses
    are fixed.
    So, to print a hardcopies of invoice with multiple mailing addresses.
    You can have Z table in the system with all the mailing addresses, say,
    Bill-to Party
    Sr No
    Address
    100023
    01
    Chennai Address
    100023
    02
    Mumbai Address
    100023
    03
    Noida Address
    Then write a logic in your print program to call the Z Table with address while printing the output.
    You can take assistance of ABAPer in your team for this.
    Regards
    JP

  • Converting a document with multiple links to a word document

    I am trying to convert a PDF file with multiple links to a word document.  When the conversion is complete and the document is saved as a word document I cannot access the links - I keep getting error messages or messages that say a program is not associated with the link.

    Hi laytonbarb,
    We would like to help!
    Are they hyperlinks? If so - you will want to insert the links back in. If they are full links do they match the links on the pdf?
    Looking forward to hearing back from you!
    Regards, Stacy

  • Split TIF document with multiple pages

    Hi,
    Iu2019m using function module 'SCMS_HTTP_GET' to retrieve TIF document from Filenet.  The TIF document returned has multiple pages.  Iu2019m able to retrieve the document with no issue.  What I need to do is split the TIF document for each page.
    Is there a way in ABAP to split the TIF on each page break?
    The reason I need to split is later in program I call FM SSFC_BASE64_ENCODE passing data to Adobe form that uses IMAGE FIELD object to display TIF.  I have no issue displaying TIF with 1 page on adobe form.  But if there are multiple pages only the first page is displayed in the Adobe PDF.  I was thinking if I could split the TIF that contains multiple page into individual TIF I would then pass in table to PDF form to display all pages of the TIF.
    Appreciate the help,
    Gary

    Hi,
    I'm also in the same situation. I am uploading the TIf file with multiple pages, but only the first page is printing. Did you get any luck in either printing all pages OR program which can spilt...
    Thanks,
    Sarma

  • Using Content Query webpart for specific Document library with multiple managed metadata - Document with multiple metadata tags not showing up

    Hi,
    I am having an issue where when I insert a Content Query webpart into a page, and filter to managed metadata, all the right documents show up except one document that happens to have two metadata tags attached to it.  The content query webpart is set
    to only look through a specific document library.  I'm not sure what I am doing wrong.
    Here is the one document with two metadata tags:
    Below is the Content Query:

    Hi,
    As I understand, you did not get the results with multiple metadata tags through Content Query web part in SharePoint 2013.
    Check things below:
    1. Check if you have set the item limit more than the display items in Presentation section of the web part. If the item number more than item limit, the rest items will not show.
    2. Check if the item you cannot find uses the content type you have set in the content type section of content query web part.
    When you edit the properties of the item, you will see the content type the item is using.
    Best regards
    Sara Fan
    TechNet Community Support

  • How do I create a PDF document with multiple different page sizes?

    I scan tif images and can have a single document with Letter, Legal, Tabloid, and even full map plan sizes (36" X 24") all in one document.  I get the document all set, then do a: File, Print, choose Adobe PDF (running Acrobat XI Pro), but it converts all the pages in my tif file to a single size.
    I've found where to set the size, but the problem is I have many different sizes.  Is there a way to have the Adobe PDF printer, just use the original documents page sizes for each page when converting?

    The program I use to create the TIF files (OpenText's eDOCS Imaging) does not make PDFs, it makes TIFs (and TIFFs).  To then convert this, if I try to do it through Adobe directly, I get an error which prompts me to open it in the native program and to choose print and then select the adobe printer.
    This works perfect if every page is the same size, but many times my documents have many different page sizes  as well as portrait and landscape within the same document (but that is a separate option).
    Doesn't Adobe have a "use the original page size / orientation" as an option when creating PDFs from existing documents?

  • How EDI Disassembler works with single ST SE segment in 271

    Hi ,
    Consider receving a 271  file with single ST SE segment with Mutiple HL segments. Will the disassembler splits the interchanges based on HL segments. And validate with the Party Agreements configured?
    Thanks,
    Sathish

    Similar issue discussed here
    https://social.msdn.microsoft.com/Forums/en-US/644f4928-4f88-4cfc-86b8-6705c4e8cea8/edi-271-5010-version-unique-transaction-numbers-trn02-from-a-file-which-contains-multiple-st?forum=biztalkediandas2
    Thanks
    Abhishek

  • How can I create a "master" document with multiple variations?

    I designed a map that will be posted at a few dozen junctions with a "you are here" symbol.  Every one will be identical with the exception of this symbol.  I don't know if there is any way to do this while preserving a "master" map that can be edited all at once.  For example, I may need to change the location of the paths and it would be a real time saver if I didn't have to edit 20+ files (each with an arrow in a different spot but otherwise the same) separately.  Also, I will be sending the file over email to a professional printer, so I am very uncertain about what would be a standard way to format something like this and really wouldn't want to clog their email.
    I haven't been able to figure out an easy way to do this.  I'm wondering if it involves using multiple artboards, a feature that I'm not very familiar with, or if the easiest way is to have a layer for each symbol location and just save twenty files (whew) and send them to the printer as separate documents - which seems super clumsy.
    I have tried copying the artboard multiple times.  This was my best attempt at editing all at once: I created whatever I needed on one artboard, then dragged it to the symbols panel, then cut, then went to edit > paste on all artboards.  However, this doesn't allow me to simply fiddle with a path or object that already exists and I can't figure out how I would delete the same object from all artboards.
    If anyone has some thoughts, I'm pretty novice, so please keep it in simple terms. Also, I am in a bit of a time crunch, so speedy answers are much appreciated!  Thank you!

    Alright, that makes sense.  And yep...I've never worked with a professional printer so I wasn't sure if it is standard to have something that will require that much involvement in the set-up on their part, but I guess it's preferable to sending a bunch of separate documents.  Thanks so much for your help, Larry!

  • How do I scan a document with multiple pages _ HP 6500 wireless

    I tried this in another thread but never got an answer, so here it goes again. I have a problem trying to scan multiple pages FROM THE GLASS into one pdf file. I have the HP Officejet 6500 wireless E709n printer running under WIN7 64-bit. My printer has the HP Document Manager software version 2.0.  How do I set that up to do multiple page from the glass into a single pdf file. I was able to do this easily with my older HP Officejet 6110 printer but the HP software on that was HP Director.   Any help will be appreciated.

    Jabzi, Clicked on the link and it takes me to a page that says to use HP software that I have to be using HP Solutions Center software that came with the HP printer. I have a HP Laptop G7-2022 that came with WIN7 and the HP 6500 wireless printer and there are several listings on the HP programs drop down menu, but no HP Solutions Center. It has HP Document Manager,  HP Photosmart, Officejet 6500, etc but no Solutions Center. So I take it then from your answer that HP Document Manager can scan multiple pages from the ADF into one pdf file but can't do the same thing from the glass, correct?  Where do I get HP Solutions Center software since it didn't come with the HP laptop or HP printer?  

  • Creating multi-page document with multiple templates

    Hi,
    I am new to Pages and am attempting to create a photo book that I can export as a PDF and have printed through an online service. I have successfully created multiple templates in Pages that I want to use in my book, but cannot figure out how to create a new page based on an existing template. If I select "New" or "New from Template Chooser" I end up with a brand new document, not a new page in my existing document. If I select Insert --> Pages, I am only given the choice to insert a Text or a Blank page. How do I insert a new page based on a template? Or, how do I apply a template to a blank page?
    Thanks very much,
    Eric

    Okay, I have figured out a way to accomplish my goal. I have my master Pages document that I am adding pages to by:
    1. File --> "New from Template Chooser"
    2. Selecting my template
    3. A new document is opened
    4. I add my photo and custom text
    5. Copy the new page from the Pages area in the left nav
    6. Paste the new page back into my master document
    This works, although is a bit cumbersome. Would much prefer to be able to simply add a page in my master based on an existing template, but I still don't see how to do that...

  • How to find page sizes in a document with multiple page sizes

    Hi Ive been given a document that has multiple page sizes in it how do i find the size of each individual page. i tried document setup but that only brings up the size of the first page

    You are going to do that for each page? You might be better off with using the Preflight panel. "Page size" can be flagged as an error, so you get a nice linked list.

  • If I have two separate pages documents, how do I compile them into one document with multiple pages?

    I have two separate documents, but I need them to be in one document in a sort of magazine form. How do I get the documents saved together so there are multiple pages in one document?

    Menu > View > Page Thumbnails > click on the thumbnails > Copy > Paste into second document thumbnails
    Peter

  • Adjusting contrast in a PDF document with multiple pages

    I have seen a question asked several times in various forums and it never gets an answer:  how do you adust the contrast and brightness of a scanned PDF if it has several pages?  You can't do it in Acrobat, and there are no third-party tools that I've found that work.  If you have Photoshop, there is a solution to the problem, which does not require adjusting every page in a document.  I use a high-speed duplex hopper-fed scanner to copy books or articles I need for my school work (no, I don't violate copyright by giving them away).  There is no way to adjust contrast at the scanner level, so I end up with a 700-page document that is too light or too dark.
    1.  Use Acrobat to extract all the pages to separate files.
    2.  Use Adobe Bridge Tools>Rename to serially rename all the pages, so that Photoshop sees them in the right order and they can be reassembled later.  There are other free or cheap tools for batch renaming that work equally well.
    3.  Experiment with your settings on a sample page in Photoshop, until you find one that works.  I usually use auto-contrast, or adjust the curves myself.
    4.  Perform whatever other manipulation you need to on the document page, such as resizing or changing mode to greyscale.
    5.  Create an action following the same steps.
    6.  Run a batch process on all the pages in your undone folder, saving them to a done folder.  Override the Open and Save settings to avoid dialogue boxes and so on.
    7.  Reassemble the document from the individual pages using the Combine function in Acrobat.
    I use this method frequently, making small adjustments to the action as necessary.  It takes a while to do a large document, but it solves a lot of problems.  One problem that is very hard to solve, however, is caused by scanning cheap paper, which makes the scans come out blotchy and grey, and very hard to re-contrast without losing resolution.  Acrobat can help solve this problem sometimes with the Optimize Document functions, but in general, it's easier to scan better, whiter paper than rescue it later.  One solution is to scan only one side at a time, and then use a third-party PDF tool to interleave the pages.
    If you have a lot of documents to do that can use more or less the same settings, create a Droplet macro in Photoshop and drag your page folders to it, instead of running a batch.
    Hope that helps.

    Thanks for posting your solution.

Maybe you are looking for