EM12c: OS Command job stopped, not being rescheduled?

This morning I had an OS Command job running long (normally < 10 seconds, this time over 20 minutes). This job is scheduled to run every 10 minutes, so there were 2 skipped executions.
As with similar jobs, I stopped the run, expecting it to be rescheduled per the defined interval. However this job was not rescheduled and hasn't run since I stopped it this morning. Like I said, other jobs that ran long last week and were stopped were automatically re-scheduled per the job definition schedule. I cannot find why this job has not been re-scheduled.
Any thoughts?

Don,
There is a semantic difference when you stop a job or when you stop a specific execution of the job. User can stop a job from job activity page stop button or using "Stop Job" button on job results page. User can stop a execution by using "stop" button after selecting a job execution in specific job results page.
In former case job engine would stop the whole job and job will not be scheduled in future. However when you stop a specific execution of job, then job engine consider it as user is intending to stop only the current execution of the job so future run of job will continue to work as is.
I agree from end user perspective - the message on the confirmation screen is not very clear and we will file a bug and fix in next scheduled version of Enterprise manager.
-- Ashutosh

Similar Messages

  • Client Commands are Currently Not Being Accepted

    Hi,
    I made a outline restructure on my essbase but my laptop suddenly shut down. When I tried to turn the application on again and tried to add members on Essbase, I got the error message, "Client commands are currently not being accepted"
    I can't make any changes and I also have tried to end archive using MAXL but also get the same error message.
    Anyone has the solution please let me know since this is on production machine. Thanks.

    Since you were in the middle of an outline restructure, I'm guessing it is hung. You can double check that by looking in the database directory to see if there is a file dbname.otn and/or .pan or .inn or .esn files. If they are there, then stop the application. Yoy may need to go to task manager in windows or PS in Unix and kill the esssvr session associated with the session. Then try to restart the app. If it starts fine, if not, look at the files mentioned above and move them to a temp directory and try again. If it still does not work, then the third option would be to move the files above out and move bak in the files ending in "N" renaming them to the proper name..ind, pag, .otl, .esm and try again.
    Typically, depending on version you only need to kill the app process and restart

  • Essbase Error 1013206 - SetActive Commands are Currently Not Being Accepted

    Hi All,
    I am facing the below error very frequently which is causing the disabling the "Enable connects"on the respective application. It is not happening for all the scheduled processes, just BETWEEN the last cube build or first cube build of the day.
    In Essbase.log server logs observered as below:
    [Fri Sep  9 15:51:51 2011]SERVER NAME/ESSBASE0///Error(1051544)
    message on contacting or from application:
    [Fri Sep  9 15:51:51 2011]SERVER NAME////Error(1013206)
    SetActive Commands are Currently Not Being Accepted
    [Fri Sep  9 15:51:51 2011]SERVER NAME/ESSBASE0///Warning(1051003)
    Error 1013206 processing request [MaxL: Execute] - disconnecting
    Please suggest as It is happening repetedly andcausing the Down time.

    Is it possible that you've issued the command: alter application disable connects ;
    That would cause MaxL to send back that message.
    Per the docs:
    Prevent any user with a permission lower than Application Managers from making connections to the databases that require the databases to be started. This includes starting the databases or performing the ESSCMD SELECT command on the databases. Database connections remain disabled for all databases in the application, until the application setting is re-enabled by the administrator.Link: http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/maxl_altapp.html
    Is it possible that you issue that command and then try to do things with a username that doesn't have App Manager or higher rights?
    Regards,
    Cameron Lackpour

  • Client Commands are Currently Not Being Accepted  due to restructuring

    Hello,
    We are running Essbase and Planning 9.3.1. Occasionally, the users get the above error, "Client Commands are Currently Not Being Accepted", because Essbase spontaneously starts restructuring itself. We schedule a restructure in the evening. Is there a way to prevent this spontaneous restructuring from occurring during business hours?
    Thank you,

    Thank you Glenn,
    The users say they did not change the outline or refresh the database. The log file says sysadmin gave the command, as I have copied here.
    Received Command [Restructure] from user [sysadmin]
    If the users did something, I would expect the command to come from them.
    The essbase.cfg does not have the work sync or security in it. Can you tell me more on how to determine if this is our problem?

  • Task Scheduling Script - Need help with passing the scheduled command (variables are not being evaluated)

    Hi Everyone,
    I'm trying to get a simple task scheduler script to work for me and can't get the command I need passed to the scheduler to evaluate properly.
    Here's the script:
    ###Create a new task running $Command and execute it Daily at 6am.
    $TaskName = Read-Host 'What would you like this job to be named?'
    $Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
    $User = Read-Host 'What is the user name?'
    $Pwd = Read-Host 'What is the password?'
    $Server = Read-Host 'What is the server address?'
    $NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
    $RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
    $Command = 'winscp.com /command "option batch abort" "option confirm off" "open $Proto://$User:$Pwd@$Server" "put $NetworkDir $RemoteDir" "exit"'
    $TaskAction = New-ScheduledTaskAction -Execute "$Command"
    $TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
    Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
    Write-Host "$TaskName created to run Daily at $TaskStartTime"
    What's messing up is the $Command creation, the command needs to have the quotes around "option blah blah", but if I wrap the whole line in single quotes the variables that are evaluated for the "open blah blah" strings (which also need
    to be inside quotes) and the "put blah blah" string are not being evaluated properly.
    I've dorked about with different bracketing and quoting but can't nail the syntax down, could someone point me in the right direction? My Google-fu seems to be lacking when it comes to nailing down this issue.
    Thanks

    Hmmn, closer. I'm getting this error now:
    + $Command = $tmpl -f  $User, $Pwd, $Server, $NetworkDir, $RemoteDir
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (winscp.com /com...t {4} {5}" exit:String) [], RuntimeException
        + FullyQualifiedErrorId : FormatError
    And the command being added to the new task looks like this:
    winscp.com /command "option batch abort" "option confirm off" "open ($Proto)://($User):($Pwd)@($Server)" "put $NetworkDir $RemoteDir" "exit"
    Here's the current state of the script. I get what you're doing to try to bypass the quotes issue, using an array. I'm just not awesome at this yet sooooooo...
    $TaskName = Read-Host 'What would you like this job to be named?'
    $Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
    $User = Read-Host 'What is the user name?'
    $Pwd = Read-Host 'What is the password?'
    $Server = Read-Host 'What is the server address?'
    $NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
    $RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
    $tmpl = 'winscp.com /command "option batch abort" "option confirm off" "open {0}://{1}:{2}@{3}" "put {4} {5}" exit'
    $Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
    $TaskAction = New-ScheduledTaskAction -Execute $Command
    $TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
    Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
    Write-Host "$TaskName created to run Daily at $TaskStartTime"

  • Command link action not being called

    Hi,
    I raised another bug about this and I thought I had fixed this but it seems to have come back again! Here are the details:
    The Problem
    - I have a jsf application that uses SDO to manage database calls/changes. In the application I have a navigation menu which consists of command links. From time to time (doesn't always happen) you click on a link and the page just refreshes and you are not taken to the requested page. Now this doesn't happen all the time! I've looked at logs and added debugs but I can't find anything apart from the face that when the page just refreshes the action behind the command link is not called.
    Has anyone experienced this before? I'm using wsad 5.1.2 and have this problem and the version of faces is 1.0.
    Please help as I have no idea what is causing this!!

    yep, sorry for reposting but in that post I said I had it fixed but obviously its not. What's really change is that I cant recreate this problem on my laptop but on our dev and test environments this problem still exists. My initial thoughts is that this is an environment problem but i'm not totally convinced as the was settings etc are the same as on my laptop.

  • SQL Server Agent - Job History not being recorded (SQL Server 2005)

    I have been trying to get to the bottom of an issue with SQL Server Agent not recording any job history. I am using SQL Server 2005 on a single Windows Server 2008 machine (i.e. no other domain controllers/active directory servers).
    The SQL Server Agent service is configured to 'Log On As' NT user account 'sqlagent'. The jobs themselves are executed successfully (all 'Transact-SQL' type steps actually use the 'sa' account) however the there is no actual job history to be found for any
    of the jobs -- in the SQL Activity monitor, the 'Last Run Outcome' is always 'Unknown' and the 'Last Run' date is always 'Never' for all jobs; in the SQL Job History Viewer there are no entries for any instances of a job being executed.
    The 'sqlagent' NT user account ia a member of the 'Administrators' NT group; the 'Administrators' group appears under Security > Logins on the database server. I have another server that also uses the same setup with a 'sqlagent' NT user account, on that
    database server the 'sqlagent' user account appears under Security > Logins and the SQL job history works correctly. I have attempted to add the 'sqlagent' to the Logins on the affected server using the SQL Server Surface Area configuration but this operation
    returns an error, detailed below.
    Additionally, I have attempted to use the built-in NT system account 'NETWORKSEVICES' to run the SQL Agent Service but this also results in exceptions in the error log and no job history being recorded. The entries in the error logs are very similar to those
    from the 'sqlagent' NT user account but instead the user is referred to as 'NT AUTHORITY\ANONYMOUS LOGON' in the error logs, again these are detailed below.
    Many thanks in advance for anyone's time and help with this issue!
    Arthur
    The following errors are raised in SQL Server Agent > Error Logs each time a job is executed:
    Date 11/11/2012 18:30:01
    Log SQL Agent (Current - 11/11/2012 18:30:00)
    Message
    [298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000]
    Date 11/11/2012 18:30:01
    Log SQL Agent (Current - 11/11/2012 18:30:00)
    Message
    [382] Logon to server 'XXXXXXXX' failed (ConnAttemptCachableOp)
    If the SQLAgent service is configured to use the NT system account 'NETWORKSERVICE' then the following errors are returned instead:
    Date 29/10/2012 18:30:15
    Log SQL Agent (Archive #1 - 29/10/2012 18:38:00)
    Message
    [298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. [SQLSTATE 28000]
    Date 29/10/2012 18:30:15
    Log SQL Agent (Archive #1 - 29/10/2012 18:38:00)
    Message
    [382] Logon to server 'XXXXXXXX' failed (ConnAttemptCachableOp)
    I have tried granting the 'sqlagent' NT user account with SysAdmin Server Role privaledges using the SQL Server User Provisioning tool in SQL Server Surface Area Configuration, but this always throws the following, similar error:
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. (Error: 18452)
    ===================================
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18452&LinkId=20476
    Server Name: 127.0.0.1,1344
    Error Number: 18452
    Severity: 14
    State: 1
    Line Number: 65536
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
       at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at sqlprov.SysAdminServerRole.ProvisionInstance(Instance instance, String userName)
       at sqlprov.ProvisionTask.Provision(Instance instance, String userName)
       at sqlprov.MainForm.ProvisionTasks()

    Hi Rama,
    Thanks for your reply. I have run the query you specified and can see only one entry with "NTLM" in the auth_scheme column, all of the rest have "SQL". It figures that the entry with "NTLM" is relating to the one NT user account that can successfully log
    in to the service (as mentioned in my reply to Nag above, this is the NT user account that installed the service on the machine). I have also executed the same query on the other machine that I mentioned in my original post and this contains two "NTLM" entries,
    I'd assume that these relate to the NT user that installed the software and the correctly working "sqlagent" NT user account that is correctly logging the job history on that machine.
    I think the problem is very much to do with granting access to new NT user accounts, as per the KB article that you have quoted above. In this case, it is not relating to scenarios 1 or 2 as these relate to SQL Server logins and this issue is about a Windows
    Authentication login. As I mentioned to Nag above, I am unable to grant any NT user accounts with access to the service however the NT accounts are all defined locally on the same machine as the SQL server is installed (i.e. there is no domain controller,
    active directory controller, etc) so I don't understand how the Windows login cannot be verified.
    Any further advice on the issue would be greatly appreciated, please let me know if there is any more information I can provide to help diagnose the problem.
    Many thanks!
    Arthur

  • Command in .xinitrc not being executed? [SOLVED]

    Hi!
    I made some changes to my keyboard layout so I can use my hotkeys.
    When I start x I need to execute the command
    xmodmap ~/xmodmap.conf
    I added this in my .xinitrc file to be executed, but it does not work.
    When I run it from cli it works great.
    Suggestions?
    Thanks!

    phrakture wrote:
    are you using startx or xdm?
    I start x using kdm:
    My inittab says:
    id:5:initdefault:
    and
    x:5:respawn:/opt/kde/bin/kdm -nodaemon
    So do I execute xinitrc?
    Thanks for all the help sofar!
    :twisted:

  • LMS 3.2 on Solaris 10 - CatOS PVlan Mapping commands to MSFC not being saved by Ciscoworks

    Hi All,
    We are doing some troubleshooting after the recovery of a Cat6500 Hybrid switch and we've encoutered something strange. It seems that Ciscoworks does not save the pvlan mapping statements applied to the MSFC (module 15 in this case). Below I have two excerpts. The first one is from an export of the latest saved config of a similar device. The other one is from the actual same switch.
    Any ideas why this is happening?
    Thanks
    Jose Ribeiro
    -bash-3.00$ cat ctspitdcemsw303-172-raw.cfg | grep mapping
    #Macro-Port mapping
    #vlan mapping
    set pvlan mapping 2100 2101 1/7
    set pvlan mapping 2100 2103 1/7
    set pvlan mapping 2100 2104 1/7
    set pvlan mapping 2100 2106 1/7
    set pvlan mapping 2100 2109 1/7
    set pvlan mapping 2600 2603 5/11-12
    set pvlan mapping 2600 2604 5/11-12
    set pvlan mapping 2800 2801 5/4
    set pvlan mapping 2800 2802 5/4
    set pvlan mapping 2800 2803 5/4
    set pvlan mapping 2800 2804 5/4
    set pvlan mapping 2800 2805 5/4
    set pvlan mapping 2800 2806 5/4
    set pvlan mapping 2800 2807 5/4
    set pvlan mapping 2800 2808 5/4
    set pvlan mapping 2800 2809 5/4
    set pvlan mapping 2300 2303 9/31
    set pvlan mapping 2300 2304 9/31
    set pvlan mapping 2600 2603 9/28
    set pvlan mapping 2600 2604 9/28
    -bash-3.00$
    ctspitdcemsw303> (enable) sh runn | incl mapping
    set pvlan mapping 2100 2101 1/7
    set pvlan mapping 2100 2103 1/7
    set pvlan mapping 2100 2104 1/7
    set pvlan mapping 2100 2106 1/7
    set pvlan mapping 2100 2109 1/7
    set pvlan mapping 2600 2603 5/11-12
    set pvlan mapping 2600 2604 5/11-12
    set pvlan mapping 2800 2801 5/4
    set pvlan mapping 2800 2802 5/4
    set pvlan mapping 2800 2803 5/4
    set pvlan mapping 2800 2804 5/4
    set pvlan mapping 2800 2805 5/4
    set pvlan mapping 2800 2806 5/4
    set pvlan mapping 2800 2807 5/4
    set pvlan mapping 2800 2808 5/4
    set pvlan mapping 2800 2809 5/4
    set pvlan mapping 2300 2303 9/31
    set pvlan mapping 2300 2304 9/31
    set pvlan mapping 2600 2603 9/28
    set pvlan mapping 2600 2604 9/28
    set pvlan mapping 2300 2303 10/35-36
    set pvlan mapping 2300 2304 10/35-36
    set pvlan mapping 2300 2305 10/35-36
    set pvlan mapping 2300 2309 10/35-36
    set pvlan mapping 2300 2303 11/34
    set pvlan mapping 2300 2304 11/34
    set pvlan mapping 2600 2603 11/12-13,11/38-39
    set pvlan mapping 2600 2604 11/12-13,11/38-39
    set pvlan mapping 2300 2303 12/45-46
    set pvlan mapping 2300 2304 12/45-46
    set pvlan mapping 2600 2603 12/41-44
    set pvlan mapping 2600 2604 12/41-44
    set pvlan mapping 2000 2001 15/1
    set pvlan mapping 2000 2002 15/1
    set pvlan mapping 2000 2003 15/1
    set pvlan mapping 2000 2005 15/1
    set pvlan mapping 2000 2009 15/1
    set pvlan mapping 2200 2201 15/1
    set pvlan mapping 2200 2202 15/1
    set pvlan mapping 2200 2203 15/1
    set pvlan mapping 2200 2208 15/1
    set pvlan mapping 2300 2301 15/1
    set pvlan mapping 2300 2302 15/1
    set pvlan mapping 2300 2303 15/1
    set pvlan mapping 2300 2304 15/1
    set pvlan mapping 2300 2305 15/1
    set pvlan mapping 2300 2306 15/1
    set pvlan mapping 2300 2307 15/1
    set pvlan mapping 2300 2309 15/1
    set pvlan mapping 2300 2312 15/1
    set pvlan mapping 2500 2501 15/1
    set pvlan mapping 2500 2503 15/1
    set pvlan mapping 2600 2602 15/1
    ctspitdcemsw303> (enable)

    Hi Joseph,
    When I run a write term I can see the whole switch config, though in pages (I need to hit enter several time to go trhu the whole config).
    ctspitdcemsw303> (enable) write terminal
    This command shows non-default configurations only.
    Use 'write terminal all' to show both default and non-default configurations.
    begin
    # ***** NON-DEFAULT CONFIGURATION *****
    #time: Mon May 9 2011, 09:08:46 EDT
    #version 8.5(2)
    Also a View Config Raw from Device Center shows configuration up to module 10, completely missing modules 11, 12 and 15 (pvlan mappings to the MSFC).
    Thanks,
    Jose

  • My 4th generation iPod touch is completetly frozen... Doesn't respond to home   turn off command, it's not being recognized by iTunes. It only shows a white screen and doesn't respond to nothing

    can someone help me?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • USMM report showing some Background job, which not in SAP

    Sir,
    I took USMM report from SAP PRD system for audit purpose.  Everything is fine , expect some background job. There showing some background job finish on 01.04.2013. But I don't find any background job in SM37 which showing finish in USMM report. Please suggest what to do. Following are the background Job..
    0000 Measurement Extensions Finished on 01.04.2013 at 12:55:30
    0001 ABAP Workbench Finished on 01.04.2013 at 12:55:44
    0002 Mobile Engine Finished on 01.04.2013 at 12:55:24
    0009 Activity Checks Finished on 01.04.2013 at 12:56:55
    0100 mySAP Human Resources Finished on 01.04.2013 at 12:55:26
    0101 SAP HR e-recruitment Finished on 01.04.2013 at 12:55:24
    0200 mySAP Banking Finished on 01.04.2013 at 12:55:25
    0250 Financial Services Loan Management Finished on 01.04.2013 at 12:55:25
    0300 mySAP Healthcare Finished on 01.04.2013 at 12:55:25
    0400 mySAP Utilities Finished on 01.04.2013 at 12:55:26
    0500 mySAP Telecommunications Finished on 01.04.2013 at 12:55:26
    0600 mySAP Insurance Finished on 01.04.2013 at 12:55:26
    0700 mySAP Public Sector Finished on 01.04.2013 at 12:55:26
    0730 mySAP Public Sector Campus Finished on 01.04.2013 at 12:55:26
    0800 mySAP Oil & Gas Finished on 01.04.2013 at 12:55:26
    0900 mySAP Engineering & Construction Finished on 01.04.2013 at 12:55:27
    1000 mySAP Aerospace & Defense Finished on 01.04.2013 at 12:55:28
    1100 mySAP Automotive Finished on 01.04.2013 at 12:55:28
    1201 SAP Financial Supply Chain Management Finished on 01.04.2013 at 12:55:26
    1215 SAP FSCM Credit Management Finished on 01.04.2013 at 12:55:27
    1500 mySAP Retail Finished on 01.04.2013 at 12:55:26
    1550 BI Accelerator Finished on 01.04.2013 at 12:55:27
    2100 SAP Records Management Finished on 01.04.2013 at 12:55:28
    2200 ICM Incentive and Commissions
    Management
    Finished on 01.04.2013 at 12:55:27
    2320 SAP Exchange Infrastructure Finished on 01.04.2013 at 12:55:29
    2600 SAP Exchange Infrastructure Adapter Finished on 01.04.2013 at 12:55:29
    6000 mySAP Financials Real Estate Finished on 01.04.2013 at 12:55:28
    7100 mySAP Financials Corporate Finance
    Mgmt
    Finished on 01.04.2013 at 12:55:28
    7500 Third-Party CAD Integration Finished on 01.04.2013 at 12:55:29
    7550 SAP Learning Solution Finished on 01.04.2013 at 12:55:30
    8020 Recipe Management Finished on 01.04.2013 at 12:55:29
    8030 Catch Weight Management Finished on 01.04.2013 at 12:55:28
    8040 RBD Tool Finished on 01.04.2013 at 12:55:29
    8050 Bex Broadcaster Finished on 01.04.2013 at 12:55:28
    Thanks & Regards,
    Nabin Chatterjee

    Hi,
    You will get the list of background jobs in SM37.
    It seems that these jobs are not being scheduled by your user ID.
    In username field use * and check on the desired job statuses and use the date from and to on which you want to see the jobs.
    Screen shot is also attached for your reference.
    Regards,
    Siddharth Khandelwal

  • [svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

    Revision: 1978
    Author: [email protected]
    Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
    Log Message:
    Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
    QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
    Doc: No
    Modified Paths:
    blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
    blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
    blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

    I have a lot of grief with this version of Windows Media Player.
    It is very buggy and frustrating to use.
    I have my Music library on a QNAP NAS, which is as reliable as they come.
    System notifications make it not save changes.  It also does not do a good job of interpreting albums and artists from folders.  Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
    or date.  It separates and merges albums/tracks without sense or reason.  Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes.  Often it has not.
    This is the first time I've used WMP in this capacity, and I do not recommend it.
    New service pack please.

  • Just installed the latest Canon printer software update (V 3.2) from the App store. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Printing via Airport.

    Just installed the latest Canon printer software update (V 3.2) suggested by the App store in effort to get printer working after OS update. Canon Pixma MX850 will not print. Dialog says job stopped at the server - no pages found. Utilities, print test page works. Attempting to print via Airport from a MacBook Pro. Also from a Mac Pro via ethernet. Both worked before updating to Yosemite. Canon Pro 9000 Mk 2 works via USB. Tried installing driver 10.84 from OS 10.9 as suggested by PAHU; no luck.

    The "stopped at server - no pages found" message would suggest an image with the print file that is created by the printer driver on the MacBook Pro. But if the Mac Pro is getting the same message then that is unusual.
    To rule out a couple of causes I would try connecting the MacBook Pro directly to the MX850 by USB cable. This action should result in a new printer for the USB connection being created automatically. If not then you may need to manually create it as you won't be able to use the existing printer that exists for the network connection. With the new printer created see if this will let you print without error.
    If this USB connected printer also fails with the same message then try a reset of the printing system. Note that this action will also remove the Pro 9000 from Printers & Scanners so you will have to add it and the MX850 again.

  • How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

    How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP?  I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

    The new serial number is to the right of your chosen download.

  • Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

    Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

    Try following the instructions here: [[Firefox hangs]]

Maybe you are looking for