Email Notifications through workflow for all Approved and Rejected Orders

hi,
i have to send Email Notifications through workflow for all Approved and Rejected Orders to the user who have submitted the order for approval.how could it be done.please send ur solutions.
regards
yesukannan

Hi,
An option would be use Oracle Alert. Create an event based alert on the table where you have order approvals or rejections. This alert will be raised after inserting or updating this table. Create an action linked to this alert, and choose message as action type.
This setup can be done under Alert Manager Responsibility.
Regards,
Ketter Ohnes

Similar Messages

  • Workflow for PR approval and rejection with comments

    Dear Experts,
    We have implemented SAP standard workflow in DEV server for PR item release i.e WS00000038, when I reject a PR notification is not sent to initiator.
    If I see In SWEL - When a PR item is rejected system is picking up step "PR item significantly changed" instead of "Item release cancelled"
    1.Approval notifications are getting to user's SAP inbox but not rejections.
    2. We have to capture user rejected comments in workflow which again will be sent to outlook of user.How this can be achieved?
    Need your help in this regard.
    Thanks,
    Uzair

    Hi,
    Item release is configured for PR
    My problem is when user rejects a PR line item notification is not sent to initiators sap inbox  - though approval notifications are working fine.
    When I see event trace for this activity in SWEL its showing me as
    BUS2009 Rejection start  - No receiver entered
    The receiver data shown is empty in the log.
    How can we maintain receiver data for this one since we have used standard workflow - WS00000038
    Please help me in this regard.

  • SAP  workflow for purchase requisition and purchase  order

    Hello  Sap Workflow,
    Can you  please help me on  building workflow for purchase requisition and  purchase order    with  the necessary screen shots  ?
    your quick response  will be greatly appreciated.
    Thanks in Advance

    Hi,
    Please check http://help.sap.com .
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92761846f311d189470000e829fbbd/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92775546f311d189470000e829fbbd/frameset.htm
    Configuration guides are available in SAP Solution Manager.
    Regards,
    Masa

  • Difference between Due Date for All Tasks and Duration per task in an approval workflow

    Hello,
    I'm starting to read up and learn about approval workflows in Designer 2010.  I am confused by the fields "Due Date for all Tasks" and the "Duration per task".  I understand that the Due date for all Tasks is the date that all
    of the tasks in the workflow must be completed by.  And I understand that the duration means each task has x number of days to complete.
    But I dont know whey we need them both.  If I have the task duration set to two days and there are 3 tasks involved, then wouldn't the due date be 6 days from the start?  Why would I have a due date for all tasks that is completely different than
    the sum of the duration of days for each task? 
    Please help shed some light!

    Hi Michelle,
    Due date for all tasks, this setting specifies the date by which all tasks are due. It’s used for serial and parallel
    task.
    Duration per tasks, this setting specifies the date by which an individual
     task is due, it’s used for serial workflow participants.
    Note, when you create an approval workflow, select task process participants(approvers oob approval workflow), we can also
    select once at a time(serial) or all at once(parallel).
    For more information, see
    http://office.microsoft.com/en-us/sharepoint-server-help/use-an-approval-workflow-HA101793831.aspx
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • Send Email Notification to Assignees in Role Approval Workflow in OIM 11g

    Hi Experts,
    I am using a Custom Workflow for Role Approval in OIM (11.1.1.5.4). It is a two stage Approval Process.
    First level Approval is Requester's Manager and Second Level Approver are Role Owners(Two users who are Role Owner in OIM).
    I want to send a Email Notification to this Assignees when a request is assignd to them . So i have done Email configurations in SOA. and i am receiving Mail in English.
    But, the requirement is the mail's language should be dependent on Locale of these users.
    for example if locale of Manager is German then Manager should recieve mail of Request assigned in German Language.
    and after manager Accepts the request, Request goes to Role Approvers where we have two User, So mail should go to this two users according to their Respective Locale.
    So how can i achive this????
    Thanks!!
    TJ

    One option would be to create views and then use the oob daily alert for each manager. If the number of managers is too much, then you should consider a custom timer job. 
    Your suggested approach is possible, but has potential issues in execution. I'd suggest the timer job first.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • Workflow - split approved and rejected items for next step

    Hi! I have just started building a simple approval workflow for any price variation of the catalog items. I have a question in regards to the handling of rejection and approval of items. Say I run the workflow which does the validation and it spits out 4 items with huge price variation which requires approval by the manager (using the Approve stencil). The manager logs in, review the items and mark 3 items for approval and reject one. It seems that using this Approve function, I can only proceed to the next step if ALL of the items are approved. Is there a way to be able to release the approved items leaving the rejected one behind? This is so that we can release the approved item first (which also means to check in the items) and leave the rejected item in check-out mode.
    Appreciate your comments on the above.
    Thanks!
    SF

    Hi SF,
    Yes there is a workaround for dealing with the Approved and Disapproved Records by using the Process step instead of the Approve step.
    Kindly follow the Elearning session below which will explain you how to go about this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90efe90c-b03f-2b10-65bf-e572fef651cb
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60f28084-b90e-2b10-3eb6-d6565367048a
    You can also refer the other related links that discusses such common problems:
    Re: SRM MDM catalog
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Workflow for Document Approval

    Hi all,
    I'm a newbie to SolMan and is trying to figure out how to implement a workflow for document approval. A similar question has probably been posted in the past, but I can't find a definite solution, only some hints.
    Basically, what we're trying to achieve is the following:
    When a document is uploaded using SOLAR02, and the creator of the document changes the status to ready for sign-off, we would like to trigger a workflow which will send an email to a couple of persons who are responsible to approve the document. We already implement the digital signature, we just want to add an automatic email notification to be sent to the approvers.
    Based on my research, it seems that this is not supported by SolMan and hence we have to do a custom development.
    There's an object key called SOLMANDOC and we should raise an event (something like SIGNATURE_PROCESS_START) to send an email notification to the approvers. Can somebody confirm whether my understanding is right ? Does anybody know the name of the BADI that we can modify to achieve our goal ? 
    FYI, we're using SolMan Rel 7.01 SP 19.
    Thanks in advance
    Lara

    Hi Phil,
    I'm facing with problems with creating a simple 2 steps release strategy.
    the problem is I cant approve the last step of the release.
    This is what I did:
    In spro Digital Signature->Signature strategy:
    in "Define Authorization groups" I create this entries:
    1. EING
    2. VERIF
    in "Define Individual Signatures" I create this entries:
    1.  S1   EING
    2.  S2   VERIF
    in "Define Individual Strategies: I create this entries:
    SigStrat: ZSIGSTR
    Signature Method: R
    Display comment: X Required
    Display Remark: X
    Display document: X
    Verification: not checked
    in "Assign individual signatures"
    CtrIn  Indiv.SIG.      AGrpDIG
    1          S1               EING
    2          S2               VERIF
    Display Predecessor for Ctrln is 2 is 1
    for "Display release statuses"  an entry with one line with the value 1
    and in "Display individual signatures there 2 entries 1 and 2.
    in spro "Define Document status schemes"
    stat scheme "ZSIGSTR"
    4 status:
    Status                 init status      Sequence    Low     High       lock         Signature schma  End status         Cancel status
    COPY_EDITING       X                  10           10       20          -                    
    REVIEW                                     20           10        40        X                    ZSIGSTR         RELEASED    DECLINED
    RELEASED                                30           10        40        X                   
    DECLINED                                  40           10        20             
    I created two roles with object c_sign_bpr one with the value "EING"   and the other with the value "VERIF"
    I assign this status scheme to a document type in my project.
    I tried to release a document the first step was the author of the document move the status to "REVIEW" and I got a window that i need to enter my password and it worked ok.
    The problem is in the second step that I need to release the document (now is in a REVIEW status) When I press on the icon in order to release I didn't get the option to release only to cancel there is no "V" option in the small window.
    Can you please tell me if I did a correct customization? also can you tell me if my problem is maybe missing authorization? Can you direct me to reading material or to an example?
    Best regards
    Lior Grinberg
    Edited by: Lior Grinberg on Nov 28, 2011 6:22 PM

  • Email notification from workflow?

    Dear all,
    I am using EBS version is 11.5.8 and database version is 9.2.0.3. We are using workflow to send out email notification once the PO gets approve.
    Now, we are going to change SMTPServerName(email server IP) let say from '123.45.66.10' to '999.88.77.66'. What can I change workflow setting so that the email notification will no longer send to the old email server IP, email should be sent to the new email server.
    I have try to read lots of document in metalink and it is not working.
    Does anyone encounter this before?
    Best Regards,
    Amy

    Hi Amy,
    I haven't use OAM before... where can I download it?*[Oracle Applications Manager 11i integrated with Oracle Applications 11i|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=166115.1]*
    *[Oracle Applications Manager 11i Availability|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=166762.1]*
    You can refer the following documents to setup your workflow,
    *[How-To Setup Workflow Mailer in an Oracle Applications 11i environment|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=234436.1]*
    *[Configuring the Workflow Notification Mailer(s) in Oracle Applications Manager 11i|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164871.1]*
    *[Configuring the Oracle Workflow 2.6/11i.OWF.H Java-based Notification Mailer with Oracle |https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=268085.1]*
    *[Example Of Configuring Workflow Java Notification Mailer With Oracle Applications 11.5.x|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=249957.1]*
    Thanks,
    Anchorage :)

  • Approve and Reject of a workflow from outlook

    Hi,
      We have a requirement in which the approval and rejection of the workflow has to be done from outlook inbox. Please let me know in what way can this be achieved.
    I have gone throuigh the SWNCONFIG documentation, However I am not sure on whether it satifies the above requirement. Kindly let me know if this is possible using SWNCONFIG.
    Regards,
              Milan Thaker

    Hi MT,
    well as our friends suggested about DUET, DUET is a separate software altogether.
    Its an Outlook synchronization with SAP, but it is limited to very few business processes.
    Now question is,
    a) what is your business process which you are looking for?
    b) Your actual requirement is to approve/reject thru Outlook, well this could be resolved in a different way, that is, say for instance your business process is for Invoice Verification, where you want user to approve or reject. In this case you can integrate Outlook with SAP for this process, where the user would get the workitem in his/her Outlook, the moment the user db-clicks on it, it would take him to SAP tcode for releasing the Invoice block. This could be done thru RSWUWFML2 for all SAP versions or thru SWNCONFIG for ECC versions.
    c) If this is not you looking for, then I doubt if such an integration is possible, because getting an Approve and Reject button in your Outlook would be difficult.
    d) Else if your organization has EP or UWL installed, then Approve/Rject buttons could be populated.
    Hope it helps.
    Aditya

  • Park document approach for all PO and Non u2013 PO based vendor Invvoices

    Hello Experts,
    I want to use park document approach for all PO and Non u2013 PO based vendor Invoices.SAP
    Allows park document facility for FB60 ( Non-Po Based vendor Invoice)but doesnt allow the
    Same functionality for MIRO ( Logistics Invoice Verfication).Can anyone suggest a wayout for Park
    Document functionality for MIRO
    Thanks and Regards
    Urmila

    Hi,
    Transaction MIR7 can be used to park PO-based invoice. The same can be posted through MIRO.
    Regards,

  • Email Notifications stop working on all of my forms.  Help?

    Email Notifications stop working on all of my forms.  Help?

    This may be an indication that your incoming mail server has started treating all of those messages as SPAM, and is deleting them. Try setting those messages go to an outside e-mail account, submit a test submission of your form, and see what happens. It might at least help in tracking down the problem. If you find that the messages go to an outside account, work with your Postmaster to get the messages coming from FormsCentral whitelisted. It might still be something else, but this is something you can try to narrow the possibilities.
    Hope that helps,
    Brian

  • I am not using condition for Approval and Rejection.

    Hi Balaji,
    I am not using condition for Approval and Rejection.
    I am using Decision.
    I am not able to find the error.Rejection is going on Successfully.
    I am to rectify this error from past 4 days.
    Can you give the solution.
    Regards,
    Chow.

    Hi chow,
    What is the condition that u are using the Condition Statement.
    Please check the status returned from the Approval Process, by analyzing the Workflow Log for the particular step.
    Think there is a problem with the condition statement.
    Regards,
    Raj

  • Difference between " COMPRESS FOR ALL OPERATIONS" and "COMPRESS FOR OLTP"?

    I was looking through Oracle's OLTP Table Compression (11g onwards) documentation as well as online resources to find the syntax and came across two different versions:
    COMPRESS FOR ALL OPERATIONS
    and
    COMPRESS FOR OLTP
    The documentation I looked through didn't mention any alternative syntax, so i was wondering if anyone here might know the difference.
    Thank you!

    Table Compression Enhancements in Oracle Database 11G Rel1 as as follows:
    The compression clause can be specified at the tablespace, table or partition level with the following options:
    •NOCOMPRESS - The table or partition is not compressed. This is the default action when no compression clause is specified.
    •COMPRESS - This option is considered suitable for data warehouse systems. Compression is enabled on the table or partition during direct-path inserts only.
    •COMPRESS FOR DIRECT_LOAD OPERATIONS - This option has the same affect as the simple COMPRESS keyword.
    •COMPRESS FOR ALL OPERATIONS - This option is considered suitable for OLTP systems. As the name implies, this option enables compression for all operations, including regular DML statements. This option requires the COMPATIBLE initialization parameter to be set to 11.1.0 or higher.

  • My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    Wow!  I think I had this same issue just last night.
    I was cleaning my macbook pro retina on the outside.  Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly.  It looked super strange, it was like green halo's and it looked worse when looking at it at an angle.  Of course I took no pictures!!!  I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
    But I digress...  The image looked very green and spacey, it was almost a neat effect.  After about 5 minutes it started to look a little more digital though.  There were straight lines of this halo effect on the edges and top.  After about 10 minutes it turned into a predominate issue with the blacks on screen.  I could open a web browser and it was unnoticable on a white background.  After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle.  After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange.  But I believe that might be all in my head now.
    So yerp, lemme know what you guys figure out.

  • HT204053 My kids now each have an itouch, should we all have different apple ids even if I am paying for all itunes and app store purchases? what about icloud? I would like to share itunes and app purchases, but not necessarily photos...help please!

    My kids now each have an itouch, should we all have different apple ids even if I am paying for all itunes and app store purchases? what about icloud? I would like to share itunes and app purchases, but not necessarily photos...help please!

    The recommended solution for most families is to share the same Apple ID for iTunes and App Store purchases, so you can share your purchases, but us different IDs for iMessage, FaceTime and iCloud.  With this arrangement, each person can automatically download purchases made on the shared ID (by turning this feature on in Settings>iTunes & App Stores), while keeping their FaceTime calls, text messages and iCloud data (including photo stream) separated.  There is no requirement that the ID you use for purchasing be the same as the ID you use for these other services.
    This article: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/.

Maybe you are looking for