Employee Record Remains Locked for a While After BAPI_EMPLOYEE_DEQUEUE

Hi All,
I'm exposing the following BAPI's:
I'm calling the following  functions (through the webservice) in the following sequence:
BAPI_EMPLOYEE_ENQUEUE
BAPI_PERSDATA_CHANGE
BAPI_EMPLOYEE_DEQUEUE
The ENQUEUE and CHANGE operations work fine, m running the dequeue bapi but the record remains locked after that.
(as seen by SM12), it adds one more entry, and the employee remains locked. So question now is u2013 how to successfully Dequeue it now ?
Here is a copy of entries as seen in SM12 after Enqueue, Change, and Dequeue:
800 MZZZZZB 13:Ǻ:31 E PLOGI 80001CP00010358 0 1
800 MZZZZZB 13:26:31 E PREL 80000001273############################## 1 1
800 MZZZZZB 13:27:07 E BUT000 8000000002083 0 1
Important: The entries disappear after a while, so there is a delay in DEQUEUE to take effect.
Is there any configuration/customization to make DEQUEUE happen immediately?

Hi ,
Try using commit work statement after deque FM., else use DEQUE_ALL FM.
This may helps,
thanks & regards,
Kiran

Similar Messages

  • Employee record remains locked after BAPI_EMPLOYEE_DEQUEUE

    I use WebServices gererated by the wizard in SE37 to change Employee Data.
    I call functions (through the webservice) in the following sequence:
    BAPI_EMPLOYEE_ENQUEUE
    BAPI_PERSDATA_CHANGE
    BAPI_EMPLOYEE_DEQUEUE
    The ENQUEUE and CHANGE operations work fine, but the record remains locked after that.
    (as seen by SM12), it adds one more entry, and the employee remains locked. So question now is - how to successfully Dequeue it now ?
    Here is a copy of entries as seen in SM12 after Enqueue, Change, and Dequeue:
    800 MZZZZZB 13:26:31 E PLOGI 80001CP00010358 0 1
    800 MZZZZZB 13:26:31 E PREL 80000001273############################## 1 1
    800 MZZZZZB 13:27:07 E BUT000 8000000002083 0 1
    Important: The entries disappear after a while, so there is a delay in DEQUEUE to take effect.
    Is there any configuration/customization to make DEQUEUE happen immediately?
    Thanks a lot...

    Solved.

  • Where to buy my iPhone 5 from? I will be living in Canada for a while after 6 months. And returning to the UK regularly so I want an unlocked iPhone so I can use a local sim in Canada and a local sim in the UK to keep roaming costs down. But which model?

    Where to buy my iPhone 5 from? I will be living in Canada for a while after the next 6 months. And returning to the UK regularly so I want an unlocked iPhone so I can use a local sim in Canada and a local sim in the UK to keep roaming costs down. But which model?
    Thank you for you help in advance

    If you buy an iPhone at the UK or Canadian Apple stores, it should work on the GSM frequencies in both countries. LTE will not work as the LTE channels are different in each country and each iPhone sold in each country is only compatible on LTE channels of that particular country. Other wise it should be fine.
    Be aware that only the Apple store (retail or online) sells the unlocked iPhone in the UK. I think the situation is similar in Canada. (It is in the US).

  • Record remains locked if computer hangs

    Hi
    I am running one application in oracle10.2.0.1.0 DB backend and forms 6i as front end.
    sometimes if the workstation, where users entering data through the application hangs, then the particular record of data remains locked even if workstation is restarted.
    The "STATUS" of the session id in v$session shows INACTIVE. The I have to kill that session id and then only the record becomes free to process further.
    Please give me any suggestion.
    RGds

    If you kill your client badly, you don't perform a clean logout, so the session on the database persists and also the locks for this session.
    Maybe you could modify the [sqlnet.expire_time|http://download.oracle.com/docs/cd/B19306_01/network.102/b14213/sqlnet.htm#sthref474] to get rid of the dead sessions faster.
    regards

  • N8 - Recording video freeze for a while

    Hi!
    My problem is that when I record video with my N8, in 1 of 3 times that I use, the video get freeze for a while, and that affect the final result. I put a video to help you understan it better (sorry for my description and my English, but it isn't my nativa spoken language )
    http://www.youtube.com/watch?v=E9pv8xXq7XQ
    En the 6 second the image freeze a while, can you see it? It happens lot of times, and I made hard-resets, upgrades of firmware...all I can imagine trying to repair, but I couldn't get any result
    Does it happen to your N8's? Or have you got any odea of a solution?
    Thanks!

    Without system information and other details nobody can tell you anything. This could simply be some online feature like TypeKit taking a moment to check the connection or whatever...
    Mylenium

  • CMS - Items remain "Waiting for assembly", even after succesfull assembly

    When we assemble components in the Integration Directory track, the assembly is succesfull and the components appear in the approval tab.
    But... the components remain in the assembly tab with state "Waiting for assembly" (there are also corresponding entries with state "assembled"). The components also remain in state "Waiting for assembly" after approving or rejecting.
    We have checked the How to guides several times and searched sdn and sap notes, but could not find any leads.
    We would really appreciate if anybody could help us.

    baltwo,
    I have a lion clone. so I guess there is no reason to install lion upon it's own clone.
    anyways, how is it possible that after the complete format, the ACL problem remains.
    what about removing the recovery partition.
    the reason I want it to be done is to get rid of the problems I had with the new installation, tham I'm afraid will not be fixed otherwise: crashing apple applications (safari quitted unexpectedly), slow performance, computer freezes, GUI lags (copying 138 items to another folder stucks and I have to relounch finder) and other animation bugs at almost everywhere on the system.
    restoring lion clone and turning on the time machine sounds like the last option right now...
    and I'll be happy to hear opinions about what to do with the backed up data on the external hdd permissions.

  • Help! Fast Internet only for short while after power cycling of AEBS

    The Charter Communication tech came out to check why we weren't getting the advertised 20meg speed. Well, the speed out of the modem is ~19meg and if I plug in the laptop directly to the brand new Airport Extreme router (firmware 7.4.1), we do get the fastest speed.
    I ditched the setup I had with dual band separate networks, since we don't actually transfer files between computers much. I just want fast Internet for downloads/uploads.
    I have the network setup on auto bands and auto channels (and I have tried setting the channels manually). We don't have many neighbors so there isn't a lot of interference that I can tell.
    If I unplug the router and plug it back in--then the wireless network speed is fast ~19 megs. However, after less than 30 min. the network bogs down and becomes 5-7megs. Then if I power cycle, it goes right back up to 19megs.
    Why????

    Hello,
    There have been issues with Roboform in the past: http://kb.mozillazine.org/Firefox_crashes#Roboform
    Try disabling it and see if you still have browsing issues.

  • IPod Touch Freezes for short while after sync

    After I sync my iPod Touch (64g), a screen comes on that says "iPod is updating files." Then, afterward, the screen freezes for about 30 seconds to a minute. After that it responds to touch.
    Is this normal?

    There are occasions when the iPod touch (and iPhone) will be carrying out some behind the scenes activities, such as updating, deleting mails and other actions, some of which may also require checking with remote servers. This appears to cause some delays in reactions to input on the screens. I have never seen the specific warning you report, but if it is there, it must have been programmed in and so expected.
    I guess the time may depend on what files, how many and how big (noting you have the 64G device).

  • [SOLVED] Gnome 3 - Audio gets loud for a while after changing volume

    I'm running gnome 3.4.2 (info from gnome-session --version), running pulse audio.
    Every time I increase or decrease volume music gets really loud for a few milliseconds and then it gets back to be "quiet".
    The only "hint" what to do with this I found was to turn off alert sound (already done), but it doesn't work. And this is really getting annoying.
    I have now idea what info is relevant for solving this problem so please just ask and I add more.
    BTW: I have a feeling that whole system is "quiet" (I'm running almost all the time at 90-95% of max volume).
    Last edited by vyktor (2012-10-10 13:20:48)

    vyktor wrote:Weird, VLC works just fine, but MPD and youtube (via chrome) is crazy.
    Do you have pulseaudio-alsa installed?

  • After i do not use my personal hotspot for a while after connecting it to my ipad 4 via iphone5s it disconnects. How do i stop thsi feature?

    When i turn on personal hotspot on iphone 5 s and dont use it for 5-10 min wifi automatically stops broadcasting and ipad does not show iphone's hotspot. How do i stop this feature of wifi turning off?

    Call verizon. They are the one who can help you best.

  • My iMac hisses at me for a while after startup

    My Imac 21.5, purchased one year ago and using Maverick, is hissing at me occasionally upon startup

    It is probably connected with audio side of the machine.   There have been a few reports of similar; here is a link which looks at different ways to resolve the problem.   If you find your solution here, let us know what you did so others may benefit.
    http://superuser.com/questions/49030/background-hiss-and-noise-when-using-earbud s-on-macbook-pro

  • Reader got "not responding" for a minute after click a hyperlink in PDF document

    Hi.  Anyone got similar experience that the Reader hanged for a while after clicked a hyperlink (to an internal website)?  From the NetMon trace, it showed that the Reader made query to our internal DNS with an unknown FQDN (just "com.hk"), then waited for time-out and came back the response.  Want to know the mechanism how and why it makes such query.  My Acrobat Reader is in version 10.1.3.

    Hi,
    To use Network Diagnostics:
    Choose Apple menu > System Preferences > Network
    Click Diagnostics to open Network Diagnostics, and then follow the onscreen instructions.
    Carolyn

  • Recording Computer Audio for Free?

    When using Quicktime Player, you can record your screen and your voice, but you cant record the audio that comes from the computer.
    One solution I had was to not waer headphones and have the audio come out of the speakers so Quicktime Player would pick that up too. But that audio didn't sound too great and I like wearing headphones.
    I've seen a video or two about using SoundFlower but I don't think that works on Mavericks. I tried installing and it even said "Installent Complete" but when I checked on the menu at the top it said it wasnt installed.
    I know I can get Fraps and stuff, but I want to record computer audio for free while wearing headphones, and if possible, with Quicktime Player.
    Any ideas?

    You need to use the sound card as input. 
    You should check the pulseaudio article in the wiki. I remember something about audacity and pulseaudio. Either that audacity wasn't working or you had to do something to make it work with pulseaudio.

  • GB 09 - MBP locks up  for 3 mins after hitting record

    Basically the whole computer locks up and I can't do anything. Get the spinning beach ball etc. Then after approx 3 mins the playhead starts and I can record and switch to other programs etc. This is incredibly painful and annoying to the recording process...waiting for 3 mins after I hit record.
    I have a USB mic (AT2020) and thought this may be the issue however even with the internal mic it does the same thing.
    The even bigger quirk in all this is that if I reboot the MBP and load GB 09 I can record instantly on the first try...every subsequent attempt invokes the 3 min lockup...
    FYI I have a Mid 2009 MBP with 500gb 7200rpm HDD, 2.8Ghz Core Duo, and 8gb of 1066 RAM
    Any help or suggestions will be much welcomed!

    Thanks Christoph - I'm at work (with my MBP) but my USB mic is at home...as far as I can tell without the USB mic this has solved my problem!
    Thank you soooo much! I'm so grateful I could kiss you...however that may not be appropriate...
    I'll mark as solved as soon as I test the USB mic...
    Cheers

  • My iPad isn't locking automatically after I have been listening to iTunes Radio for a while what do I do? Thank you

    My iPad isn't locking automatically when I listen to iTunes Radio for a while. I checked my auto lock settings and it is set to 2 minutes but it isn't locking when I listen to iTunes Radio

    iTunes radio and Pandora are designed to play after the screen turns dark so you can listen to music without wasting energy on a lite screen. The main thing is that the screen goes dark after two minute. Also after listening to iTunes or Pandora when you are done be sure to double click the home button and swipe up to close the app.

Maybe you are looking for

  • End routine Works fine but missing some records while updating to cube.

    Hi All I have an issue here... My End routine works fine and I even debugged by putting the breakpoint and It fetches data from dso. strangely when I run my DTP the load is successful but I can see some of the records are missing. but there is data i

  • Open Production Orders

    Hi  Gurus, How do you consider qualifying open production orders?  Is it enough to specify in COOIS to select all orders at ALL PLANTS and those orders that are NOT TECO?  Or do I filter this out further? Thanks again, Manoj

  • How to remove any kind of Airport Express settings on computer

    My boss gave me an Airport Express 802.11n Wi-Fi to "extend" his current network which runs on a Belkin router. He has another router (linksys) that works in the office area, but wanted to eliminate the need for this router and run everything off of

  • Possible to delete certificate(s) set by gpo?

    Hi (scripting) Guys, I have a problem with the installation of an application. It tries to install a certificate which is already present. Therefore it fails with a 1603. The certificate that comes with the installation is needed by everyone in the n

  • Help! Need advice on how to read Catalogue Preview Data

    Recently my secondary harddisk which contains my recent photos crashed :-( There goes all the photos, but I could still access the 1:1 high quality thumbnails that I have generated in LR 2.5. What I know is that the thumbnails are located on C:\Docum