Error 2927 when refreshing host cluster

We are running SCVMM 2012 R2 on Windows Server 2012 and it manages a 4 node 2012 Hyper-V cluster.  I am receiving the following error when the job "Refresh host cluster" runs:
Error (2927)
A Hardware Management error has occurred trying to contact server Virtualsrv9.xxxxx.xxx :w:InternalError :HRESULT 0x803381e8:The WS-Management service cannot process the request. This service has exceeded its maximum of 100 concurrent operations per user allowed
for plugin "WMI Provider". Retry the request later or raise the Maximum Operations per User quota. .
WinRM: URL: [http://virtualsrv9.xxxxx.xxx:5985], Verb: [INVOKE], Method: [GetVersion], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/scvmm/AgentManagement]
Unknown error (0x803381e8)
This error never showed up before I upgraded to SCVMM 2012 R2, however it had been refreshing the host cluster just fine for a while after the upgrade, then it started to occur sporadically.  I have been able to fix it when it shows up by restarting
the Windows Remote Management Service on the cluster nodes which automatically restarts the VMM agent service also.Why is this happening?

I was able to fix this issue by running the following command from an administrator command prompt on my hyper-v nodes and VMM server.  I then restarted WinRM on all the servers and VMM was still cranky so I rebooted the VMM server and it has been working
since then.  Hopefully it continues as it has only been a couple days.
winrm set winrm/config/Service @{MaxConcurrentOperationsPerUser="400"}
I have exactely the same issue. When I looked the winrm parameters of all the servers, the MaxConcurrentOperationsPerUser has already been set to "1500"

Similar Messages

  • Still Error 2927 when refreshing Windows 2012 R1 Host

     I have SCVMM R2 and the latest rollups.  This issue is only occureing on a Windows 2012 (R1) server.  I do not see these issues on Windows 2008 R2 or Windows 2012 R2.  
    I have looked at other forum posts with no luck such as:  https://social.technet.microsoft.com/Forums/systemcenter/en-US/ccff7b77-6fc5-4c4b-bf71-a08a5076a3fd/action?threadDisplayName=error-2927-when-refreshing-host-cluster
    I also have cranked up the MaxConcurrentOperationsPerUser to no avail.
    After I restart WinRM and SCVMM Agent, it is ok for a little while then the errors and "This service has exceeded its maximum of 100 concurrent operations per user allowed for plugin "WMI Provider" error begin again.
    Any other ideas?
    Thanks,
    Jason

    Hi Jason,
    According to the similar thread you have mentioned ,  and you have run the following command but still doesn't work ?
    winrm set winrm/config/Service @{MaxConcurrentOperationsPerUser="400"}
    Could you please run command below with administrator privilege to list the current settings of winrm :
    winrm get winrm/config 
    (By the way , did you restart the server recently ? )
    Best Regards,
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error 2927 when creating VM from template to remote SMB storage or CSV volume.

    Hi everybody! When you try to create a VM from a template cause an error (2927), this occurs only if I create a VM on remote SMB storage or CSV volume, if I create a VM from a template on a local repository server (local disk C:\ for example) Hyper-V,
    while no such problem and everything goes well. Already during the week I can not solve this problem, and  and tried many methods but they do not help. Please help me to solve this problem. OS 2012R2 with last update, VMM2012R2 with last update.
    Thx!

    Yes I have installed UR2 for VMM and also applied the T-SQL script, I created new test environment, added Hyper-V hosts in my environment.

  • Error 12700 when refreshing a VM properties

    I'm in process of rebuilding our entire virtualization infrastructure and creation a new Hyper-V cluster. Currently our virtualization servers run Windows Server 2012 DC. The new OS should be Windows Server 2012 R2 DC. In addition, I'm trying to implement
    a full-fledged SC VMM 2012 R2 management solution. The physical servers in question are Cisco USC 200 M3 blades with network adapters supporting several interesting technologies like VM-FEX (a proprietary Cisco solution related to the SR-IOV technology).
    In particular, all the VMs on the existing hosts use VM-FEX virtual adapters to connect to the network. Unfortunately, this technology is not supported on Windows Server 2012 R2 (thanks to Cisco developers), so moving the VMs to updated hosts requires preliminary
    replacement of the old virtual NICs with new ones that don't use this technology.
    I've created a new Win2012R2/Hyper-V cluster (presently containing only one node) and connected it to my VMM server. I live-migrated several VMs from an old host to the new one using the Hyper-V Management Console (VMM refused to do it). I've discovered
    that after migration VMM doesn't show their NICs in the VM hardware list (this part of VM inventory is completely empty as if there is no NICs at all). Any attempt to refresh configuration of those migrated VMs fails with the following error message:
    Error (12700)
    VMM cannot complete the host operation on the XXX server because of the error: The operation failed.
    Unknown error (0x800b)
    Recommended Action
    Resolve the host issue and then try the operation again.
    In the same time an attempt to refresh another VM running on this host which was created using the Failover Cluster Management GUI is always successful. The host server and Hyper-V cluster are also refreshed with no errors. So this problem is related
    to the VMs, not to the host.
    VMs running on the old server are extremely important, so I can't risk them having any problems in the future. Any ideas how to resolve this problem?
    Evgeniy Lotosh
    MSCE: Server infractructire, MCSE: Messaging

    Well, I've discovered a way to solve this issue.
    The VMs in question were live-migrated to the new virtualization host and immediately after that made highly available by creating a corresponding cluster resource. Removing their cluster resources (but keeping the VM themselves running) got rid of the error
    during VM refresh. However, their NICs were still missing in the VMs properties in the VMM console. They appeared after I
    shut down those VMs and refreshed them again in the VMM console.
    Seems that it's somehow related to the live migration process. It might be, for example, a bug in Hyper-C tools which lose the old vNIC in the VM on the old host and can't switch to the new one (on the new host) on the run. Or it's just a bug in
    VMM. So the correct procedure for live-migrating VMs from between hosts
    must include a VM properties refresh immediately after it has been transferred to the new host and
    before it's made a cluster resource.
    Evgeniy Lotosh
    MSCE: Server infractructire, MCSE: Messaging

  • Error CNTR0019E when starting LiveCycleES cluster

    when satrting the cluster it throws warnings from the first node and errors from the 2nd node. any ideas?
    first node contunuously shows:
    [10/14/09 18:38:05:733 EDT] 00000045 DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInstances This scheduler instance (livpsapcg031255557570703) is still active but was recovered by another instance in the cluster.  This may cause inconsistent behavior.
    [10/14/09 18:38:13:253 EDT] 00000045 DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInstances This scheduler instance (livpsapcg031255557570703) is still active but was recovered by another instance in the cluster.  This may cause inconsistent behavior.
    [10/14/09 18:38:20:773 EDT] 00000045 DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInstances This scheduler instance (livpsapcg031255557570703) is still active but was recovered by another instance in the cluster.  This may cause inconsistent behavior.
    [10/14/09 18:38:28:293 EDT] 00000045 DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInstances This scheduler instance (livpsapcg031255557570703) is still active but was recovered by another instance in the cluster.  This may cause inconsistent behavior.
    [10/14/09 18:38:35:813 EDT] 00000045 DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInstances This scheduler instance (livpsapcg031255557570703) is still active but was recovered by another instance in the cluster.  This may cause inconsistent behavior.
    [10/14/09 18:38:43:333 EDT] 00000045 DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInstances This scheduler instance (livpsapcg031255557570703) is still active but was recovered by another instance in the cluster.  This may cause inconsistent behavior.
    [10/14/09 18:38:50:853 EDT] 00000045 DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInstances This scheduler instance (livpsapcg031255557570703) is still active but was recovered by another instance in the cluster.  This may cause inconsistent behavior.
    [10/14/09 18:38:58:373 EDT] 00000045 DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInstances This scheduler instance (livpsapcg031255557570703) is still active but was recovered by another instance in the cluster.  This may cause inconsistent behavior.
    2nd node EJB errors:
    [10/14/09 18:45:20:307 EDT] 00000028 ExceptionUtil E   CNTR0019E: EJB threw an unexpected (non-declared) exception during invocation of method "doRequiresNew". Exception data: com.ibm.websphere.csi.CSITransactionRolledbackException: Transaction rolled back; nested exception is:
    javax.transaction.TransactionRolledbackException: Transaction is ended due to timeout
    at com.ibm.ejs.csi.TransactionControlImpl.completeTxTimeout(TransactionControlImpl.java:1403 )
    at com.ibm.ejs.csi.TransactionControlImpl.preInvoke(TransactionControlImpl.java:295)
    at com.ibm.ejs.container.EJSContainer.preInvokeActivate(EJSContainer.java:3468)
    at com.ibm.ejs.container.EJSContainer.preInvoke(EJSContainer.java:2933)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionCMTAdapter_ caf58c4f.doRequiresNew(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:143)
    at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute(DefaultTransactionT emplate.java:79)
    at com.adobe.idp.dsc.registry.service.impl.ServiceRegistryImpl.getServiceConfigurations(Serv iceRegistryImpl.java:1264)
    at com.adobe.idp.dsc.DSContainer.installJMXMBeans(DSContainer.java:175)
    at com.adobe.idp.dsc.DSContainer.initialize(DSContainer.java:157)
    at com.adobe.idp.dsc.impl.DSCManagerImpl.start(DSCManagerImpl.java:80)
    at com.adobe.idp.dsc.startup.DSCStartupServlet$1.doInTransaction(DSCStartupServlet.java:130)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doRequiresNew(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
    at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute(DefaultTransactionT emplate.java:79)
    at com.adobe.idp.dsc.startup.DSCStartupServlet.init(DSCStartupServlet.java:123)
    at javax.servlet.GenericServlet.init(GenericServlet.java:256)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:226)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:320)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1305)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:153)
    at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtens ionProcessor.java:99)
    at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:887)
    at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:809)
    at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings(WebApp.java:527)
    at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:364)
    at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:292)
    at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:92)
    at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
    at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:671)
    at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:624)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:335)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:551)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1274)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedAppl icationImpl.java:1138)
    at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:569)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:8 17)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java: 921)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.jav a:2124)
    at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.ja va:342)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
    Caused by: javax.transaction.TransactionRolledbackException: Transaction is ended due to timeout
    at com.ibm.ws.Transaction.JTA.TranManagerImpl.completeTxTimeout(TranManagerImpl.java:615)
    at com.ibm.ws.Transaction.JTA.TranManagerSet.completeTxTimeout(TranManagerSet.java:634)
    at com.ibm.ejs.csi.TransactionControlImpl.completeTxTimeout(TransactionControlImpl.java:1395 )
    ... 41 more
    [10/14/09 18:45:20:371 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl open FFDC0009I: FFDC opened incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_3.txt
    [10/14/09 18:45:20:388 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl resetIncidentStream FFDC0010I: FFDC closed incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_3.txt
    [10/14/09 18:45:20:419 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl open FFDC0009I: FFDC opened incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_4.txt
    [10/14/09 18:45:20:434 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl resetIncidentStream FFDC0010I: FFDC closed incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_4.txt
    [10/14/09 18:45:20:476 EDT] 00000028 DSCStartupSer E com.adobe.idp.dsc.startup.DSCStartupServlet$1 doInTransaction DSC Startup failed. Reason: Internal error.
    [10/14/09 18:45:20:504 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl open FFDC0009I: FFDC opened incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_5.txt
    [10/14/09 18:45:20:518 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl resetIncidentStream FFDC0010I: FFDC closed incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_5.txt
    [10/14/09 18:45:20:524 EDT] 00000028 EjbTransactio E com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean doRequiresNew The current transaction has been marked for rollback.  This means one of three things; 1) this transaction has timed-out (the timeout period was set to [-1(sec)]-1, while the actual tx took [302(sec)]), 2) And unhandled Runtime exception occurred when calling another service (please check the logs for more detail, or 3) This is a JTA transaction and a service has explicitly marked a transaction for rollback
    [10/14/09 18:45:20:543 EDT] 00000028 EjbTransactio E com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean doRequiresNew TRAS0014I: The following exception was logged javax.transaction.RollbackException
    at com.ibm.ws.Transaction.JTA.TransactionImpl.stage3CommitProcessing(TransactionImpl.java:18 46)
    at com.ibm.ws.Transaction.JTA.TransactionImpl.processCommit(TransactionImpl.java:1625)
    at com.ibm.ws.Transaction.JTA.TransactionImpl.commit(TransactionImpl.java:1547)
    at com.ibm.ws.Transaction.JTA.TranManagerImpl.commit(TranManagerImpl.java:247)
    at com.ibm.ws.Transaction.JTA.TranManagerSet.commit(TranManagerSet.java:166)
    at com.ibm.ws.Transaction.JTA.UserTransactionImpl.commit(UserTransactionImpl.java:293)
    at com.ibm.ejs.container.UserTransactionWrapper.commit(UserTransactionWrapper.java:264)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:220)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doRequiresNew(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
    at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute(DefaultTransactionT emplate.java:79)
    at com.adobe.idp.dsc.startup.DSCStartupServlet.init(DSCStartupServlet.java:123)
    at javax.servlet.GenericServlet.init(GenericServlet.java:256)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:226)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:320)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1305)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:153)
    at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtens ionProcessor.java:99)
    at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:887)
    at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:809)
    at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings(WebApp.java:527)
    at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:364)
    at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:292)
    at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:92)
    at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
    at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:671)
    at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:624)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:335)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:551)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1274)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedAppl icationImpl.java:1138)
    at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:569)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:8 17)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java: 921)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.jav a:2124)
    at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.ja va:342)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
    [10/14/09 18:45:20:554 EDT] 00000028 ExceptionUtil E   CNTR0020E: EJB threw an unexpected (non-declared) exception during invocation of method "doRequiresNew" on bean "BeanId(LiveCycle8#adobe-dscf.jar#EjbTransactionBMTAdapter, null)". Exception data: ALC-DSC-305-000: com.adobe.idp.dsc.transaction.MarkedForRollbackException: The current transaction has been marked for rollback.  This means one of three things; 1) this transaction has timed-out (the timout period was set to [Use Environment Default], while the actual tx took [302(sec)]), 2) And unhandled Runime exception occurred when calling another service (please check the logs for more detail, or 3) This is a JTA transaction and a service has explicitly marked a transaction for rollback
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:241)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doRequiresNew(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
    at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute(DefaultTransactionT emplate.java:79)
    at com.adobe.idp.dsc.startup.DSCStartupServlet.init(DSCStartupServlet.java:123)
    at javax.servlet.GenericServlet.init(GenericServlet.java:256)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:226)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:320)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1305)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:153)
    at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtens ionProcessor.java:99)
    at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:887)
    at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:809)
    at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings(WebApp.java:527)
    at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:364)
    at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:292)
    at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:92)
    at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
    at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:671)
    at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:624)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:335)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:551)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1274)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedAppl icationImpl.java:1138)
    at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:569)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:8 17)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java: 921)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.jav a:2124)
    at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.ja va:342)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
    [10/14/09 18:45:20:584 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl open FFDC0009I: FFDC opened incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_6.txt
    [10/14/09 18:45:20:599 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl resetIncidentStream FFDC0010I: FFDC closed incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_6.txt
    [10/14/09 18:45:20:605 EDT] 00000028 LocalTranCoor E   WLTC0017E: Resources rolled back due to setRollbackOnly() being called.
    [10/14/09 18:45:20:645 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl open FFDC0009I: FFDC opened incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_7.txt
    [10/14/09 18:45:20:659 EDT] 00000028 ServiceLogger I com.ibm.ws.ffdc.IncidentStreamImpl resetIncidentStream FFDC0010I: FFDC closed incident stream file /app/IBM/WebSphere/AppServer/profiles/AppSrv01/logs/ffdc/LiveCycleES_00000028_09.10.14_18 .45.20_7.txt
    [10/14/09 18:45:20:666 EDT] 00000028 DSCStartupSer W com.adobe.idp.dsc.startup.DSCStartupServlet init Unable to start the DSCManager
    [10/14/09 18:45:20:673 EDT] 00000028 DSCStartupSer W com.adobe.idp.dsc.startup.DSCStartupServlet init TRAS0014I: The following exception was logged ALC-DSC-305-000: com.adobe.idp.dsc.transaction.MarkedForRollbackException: The current transaction has been marked for rollback.  This means one of three things; 1) this transaction has timed-out (the timout period was set to [Use Environment Default], while the actual tx took [302(sec)]), 2) And unhandled Runime exception occurred when calling another service (please check the logs for more detail, or 3) This is a JTA transaction and a service has explicitly marked a transaction for rollback
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:241)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doRequiresNew(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
    at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute(DefaultTransactionT emplate.java:79)
    at com.adobe.idp.dsc.startup.DSCStartupServlet.init(DSCStartupServlet.java:123)
    at javax.servlet.GenericServlet.init(GenericServlet.java:256)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:226)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:320)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1305)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:153)
    at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtens ionProcessor.java:99)
    at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:887)
    at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:809)
    at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings(WebApp.java:527)
    at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:364)
    at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:292)
    at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:92)
    at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
    at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:671)
    at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:624)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:335)
    at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:551)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1274)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedAppl icationImpl.java:1138)
    at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:569)
    at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:8 17)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java: 921)
    at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.jav a:2124)
    at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.ja va:342)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)

    Hi
    Check that your port 80 is not occupied by other running application (eg. IIS or ITS etc.)
    Also check that it may be disabled by antivirus software.
    Check the services file that this port is not assigned to other application then
    http               80/tcp    www www-http

  • An error occurred when refreshing the XI runtime cache

    i did what is written in note 764176 but to no avail.
    t-code sxi_cache shows
    unable to refresh cache contents
    error during chache refresh.
    when double clicking this error
    error category is blank.
    error id is update.
    can anyone help me with this please.

    Hi Sas ya,
    you can check this link.
    problem with xi cache
    or try this
    Check the RFC Destination
    INTEGRATION_DIRECTORY_HMI
    After deleting this destination an create it again
    everything work fine. This step is very errornous. Take care not to hit the enter key when specifying the user
    and password.
    Do exactly the same step as describe in the Installation
    guide. The hint that it will not works is when you test
    the connection and the system prompt you for user and
    password again even if you have specified this data
    already. In this case you do it wrong. Delete the RFC-
    Destination an create it again and again until the test will not prompt you for user and password again!
    In the xi "installation guide" you can find section:
    "Creating RFC Destinations in the ABAP Environment"
    rfc:INTEGRATION_DIRECTORY_HMI
    take a look at tab:
    Tab: Security/Logon
    and text:
    Save your entry now, before you switch to next tab, otherwise your entries may be lost.
    if you're sure that is was done in a proper way (click by click) no need for change but only if you're sure:)
    Select Basic Authentication Confirm both the popup and the warning.
    • As logon data enter the client of your SAP XI system and the user XIISUSER with the valid password
    Save your entry now, before you switch to next tab, otherwise your entries may be lost. Press Enter to go to the next screen.
    Or You can follow the links to solve your problem.
    Re: SXI_CACHE fails to refresh
    Re: SXI_CACHE in ABAP with ERROR
    Hope this helps.
    Regards,
    Vijay

  • Error -2147218798 when refreshing Essbase

    Hi,I try to refresh a outline in a Planning application and I have this error message :"Cannot refresh cubes while other users are logged on" I then disconnected every user, stopped and started the application but i does not change anything...What do you think of this ?Thank youPierre

    It is probably a lock on the Planning Db rather than a user in Essbase still logged on. Run the unlockdb utility on your planning server under Planning\utils. It will unlock the planning relation database. You should be able to run the refresh then.Let me know how you get on.RegardsChris

  • Unknown error (0x1008) when migrating to cluster shared volume.

    Hi All,
    Currently have 4 HV hosts with FC IBM SAN. Each host is Hyper-V Server 2008 R2 6.1.76.01, System Center 2012 Virtual Machine Manager 3.0.6062. The SAN has been broken up into 20 LUN's, each LUN has been formatted NTFS and hosts the single VHD file for each
    of the 20 VM's.
    We have provisioned a 3TB CSV to use as a sort of staging area and are attempting to migrate each VM to this in order to consolidate and recreate the individual LUN's into another CSV.
    When attempting to perform a live storage migration we receive the following error almost instantly.
    Error (12711)
    VMM cannot complete the WMI operation on the server (DGHVS02.example.com.au.local) because of an error: [MSCluster_Resource.Name="DTHV_EXAMPLEVM03_8abc6468-ae4a-41db-bd67-d787b81a6772"] 
    Unknown error (0x1008)
    Recommended Action
    Resolve the issue and then try the operation again.
    There is nothing in the event logs on either server (VMM or HV host).
    We have also attempted to start a debug trace but the VMM event providers are missing.
    Any help would be much appreciated.

    This has been solved.
    [MSCluster_Resource.Name="DTHV_EXAMPLEVM03_8abc6468-ae4a-41db-bd67-d787b81a6772"]
    This is resource is added by DoubleTake to each VM which manages live replication to a DR site. Once replication was stopped for this VM storage migration worked.
    Hope this helps someone else.......

  • Continous HTTP access error logged when using Weblogic Cluster

    I am not sure if this is the right forum for this discussion, but here we go anyways.
    We have created a Weblogic Cluster with one Administration Server and up to 12 Managed Servers. Our Weblogic version is 9.2.
    SSL has been enabled for all Servers and the HTTP Listen Ports are all turned off. The cluster and all applications are working fine and communicating over HTTP as expected, however the logs grow 3MB+ per hour due to an error that repeatedly logged. This error appears to be an attempt by an internal Weblogic process to access some resource over HTTP.
    Here are the various messages received in the logs. There are 3 messages logged per error occurred.
    This first log message is from the domain log (I replaced the hostname/IP info with <PEER>):
    ####<Aug 11, 2008 12:08:46 PM GMT+00:00> <Warning> <Security> <PEER> <ManagedServer7> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1218456526962> <BEA-090475> <Plaintext data for protocol HTTP was received from peer <PEER> instead of an SSL handshake.>
    This second log message is from the ".out" log from the Administration Server:
    ####<Aug 11, 2008 12:08:58 PM GMT+00:00> <Info> <ServletContext-/bea_wls_internal> <PEER> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1218456538658> <000000> <HTTPClntLogin: Login rejected with code: 'Failed', reason: java.net.ProtocolException: HTTP tunneling is disabled
    at weblogic.rjvm.http.HTTPServerJVMConnection.acceptJVMConnection(HTTPServerJVMConnection.java:88)
    at weblogic.rjvm.http.TunnelLoginServlet.service(TunnelLoginServlet.java:80)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3231)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1362)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    This last message is from the access.log for the Admin Server:
    <PEER> - - [11/Aug/2008:12:08:58 +0000] "GET /bea_wls_internal/HTTPClntLogin/a.tun?wl-login=https+dummy+WLREQS+9.2.2.0+dummy+%0A&rand=8038349418070109915&AS=2048&HL=19 HTTP/1.1" 200 1337
    I have searched all over trying to find a solution but with no luck thus far. I have seen some posts about turning on HTTPTunneling and this does seem to prevent the error from occurring, but this is not a solution for us.
    I could really use some help in understanding whats going on and trying to resolve this issue. Our client will make a big deal out of this and will want a solution. Any help would be greatly appreciated.
    Message was edited by:
    user651444

    Hi,
    We had this problem with WebLogic Platform 9.2 MP2, running on Solaris. The patch CR344429 worked fine. The corresponding patch for 9.2 MP3 is CR370091. You can get these patches through Oracle Support.
    A couple of points:
    1. We did not have to set StartScriptEnabled=true for the patch to work. We use the SSL Niode manager.
    2. Using the t3: protocol (-Dweblogic.management.server=t3://<admin server listen address>:<admin server listen port) does stop these exceptions, but causes these warning messages to appear in the administration server log file:
    <Warning> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <...> <BEA-002637> <Failed to register a disconnect listener because of weblogic.rmi.extensions.DisconnectMonitorUnavailableException: Could not register a DisconnectListener for [weblogic.rmi.internal.BasicRemoteRef ......>
    <Warning>  <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <...> <BEA-002637> <Failed to register a disconnect listener because of weblogic.rmi.extensions.DisconnectMonitorUnavailableException: Could not register a DisconnectListener for [weblogic.rmi.internal.BasicRemoteRef ......>
    Hope these comments help.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • VMM 2012 sp1 keeps on crashing randomly when refresh hosts or VMs

    This problem has bothered us so much since we installed the last 1 or 2 update rolls. I was not able to find any relevant info online after digging for hours. The forum is my last hope now so any suggestion would be very much appreciated.
    We are currently on 3.1.6018.0, with all the updates for SP1 installed. Every time we start the VMM console, we have to keep our fingers crossed, very likely it will crash and we have to restart the VMM service. Then we would be fine for a while until later
    someone starts a new VMM console session. 
    The errors logged every time: 2 identical event 1(I found it interesting to have identical errors from the same source to be logged twice), and event 19999
    I think the core part of the error should be this:
    P5(methodName):M.V.E.D.SANStorageManagementHelper.FindVolumeForGivenFileSystemPath
    P6(exceptionType):System.NullReferenceException
    the VMM has all our NAS listed, but we are using CSV through failover cluster manager and not using VMM to provision storage,
    is this part of the problem?
    Event 19999:
    Error
    1/12/2015 11:29:54 AM
    Virtual Machine Manager
      19999
    None
    Virtual Machine Manager (vmmservice:19340) has encountered an error and needed to exit the process. Windows
    generated an error report with the following parameters: 
    Event:VMM20
    P1(appName):vmmservice
    P2(appVersion):3.1.6018.0
    P3(assemblyName):Engine.Deployment
    P4(assemblyVer):3.1.6018.0
    P5(methodName):M.V.E.D.SANStorageManagementHelper.FindVolumeForGivenFileSystemPath
    P6(exceptionType):System.NullReferenceException
    P7(callstackHash):ad2a
    Event 1
    Error
    1/12/2015 11:29:54 AM
    Virtual Machine Manager
      1
    None
    System.NullReferenceException: Object reference not set to an instance of an object.
       at Microsoft.VirtualManager.Engine.Deployment.SANStorageManagementHelper.FindVolumeForGivenFileSystemPath(WsmanAPIWrapper
    wsmanWrapper, String inputFilePath, StorageManagementHelper storageManagementHelper, String& rootPath)
       at Microsoft.VirtualManager.Engine.Deployment.SANStorageManagementHelper.GetLUNIDFromFSPath(WsmanAPIWrapper
    wsmanWrapper, String FileSystemPath, StorageDeviceIdentifier& storageIdentifier, String& VolumeRootPath, Boolean& IsiSCSILUN, String& DiskDeviceID, String& DiskUniqueID)
       at Microsoft.VirtualManager.Engine.Deployment.SANAcceleratorHelper.MapFSPathToLun(WsmanAPIWrapper
    sourceWrapper, String fspath, String& root, StorageDeviceIdentifier& lunID, Boolean& isIsciLun, String& diskAddress, String& diskUniqueID)
       at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.MapFileOrDiskToLUN(WsmanAPIWrapper
    sourceWrapper, List`1 vmFilesToLunInfoList, Object physicalItemOrDiskOrPath, Boolean hypervVM, VMFilesToLunInfo hypervConfigLun)
       at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.MapVMFilesToLUN(List`1& vmFilesToLunInfoList,
    WSManConnectionParameters hostConnectionParameters)
       at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.GetVMLUNInformationFromRealWord(List`1&
    lunInfoList, WSManConnectionParameters hostConnectionParameters)
       at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.GetVMSANConfigurationFromRealWorld(WSManConnectionParameters
    hostConnectionParameter)
       at Microsoft.VirtualManager.Engine.Deployment.VMLUNMappingReader.HasVMLUNInformationChanged(VMSANConfiguration&
    sanConfig, WSManConnectionParameters hostConnectionParameter)
       at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateVMLUNInformation()
       at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateFullVMObjectToCarmine(IVMComputerSystem
    vmComputer, VMData vmData, UpdateRequired updateRequired, Boolean vmObjectHasChanged)
       at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.FullyRefreshVM(FullyResheshVMParamObject
    param)
       at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.<>c__DisplayClassc.<RunFullRefresher>b__a(Object
    paramObj)
       at Microsoft.VirtualManager.Utils.Multithreading.ThrottledThreadPool.<>c__DisplayClass3.<ScheduleNextThread>b__2(Object
    dummy)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback
    callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback,
    Object state, Boolean preserveSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()-2147467261

    Hi MarcoZhang,
    Did you follow the similar article regarding event ID  19999 and 1 :
    http://blogs.technet.com/b/scvmm/archive/2009/01/21/vmm-admin-console-crashes-with-errors-19999-and-1-as-logged-in-vm-manager.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Error in Cache Refresh(Unable to refresh cache contents)

    Hi All,
    When i am refreshing Cache from the browser using link CPACache/refresh?mode=full it says success.
    When i do from SXI_CACHE it gives an error.
       Error during last attempt to refresh cache
       Unable to refresh cache contents
    So when i run any schenario in message monitoring i get the following error-
    <i>SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="XICACHE">UPDATE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>http response does not contain a valid XML root tag</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error></i>
    I checked the INTEGRATION_DIRECTORY_HMI connection...
    here the response which im getting is..
    <i> HEADER NAME                HEADER VALUE
    response_line               HTTP/1.0 200
    server_protocol             HTTP/1.0
    status_code                 200
    status_reason
    ragma                       no-cache
    ache-control                no-cache
    ontent-type                 text/html
    ontent-length               87
    HTTP BODY
    TITLE>Error</TITLE>#<BODY>#<H1>Error</H1>#FW-1 at nebula: Unknown WWW s
    rver.</BODY>##
    Time (ms)                                 17</i>
    I believe that is not the right response.
    Everything was working fine yesterday when all of a sudden this error cropped up from no where.
    Regards,
    Rahul

    Hi,
    This is the error it shows there..
    <b>ERROR ID</b>      <i>UPDATE</i>
    <i>http response does not contain a valid XML root tag</i>
    Regards,
    Rahul

  • JCS-122017 Error When refreshing Application List

    JCS-122017 Error When refreshing Application List
    This issue started occurring when we migrated CPS from M28 to M33
    We currently have M33.45 in Dev and are still experiencing the same error when refreshing the application list.
    To replicate the issue, I can login, click applications, click the redwood folder, then click the refresh button within CPS and receive the below error.
    [Errors found]      11:35:27 AM: JCS-122017: Trying to use non-attached object Application:2,472
    Has anyone else had this issue, this appears to happen to all of the application lists when refreshing
    JCS-122017: Trying to use non-attached object Application:2,472
         at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkHasSession(BaseSchedulerEntityImpl.java:853)
         at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkCanRead(BaseSchedulerEntityImpl.java:859)
         at com.redwood.scheduler.model.NamedRootObjectImpl.getName(NamedRootObjectImpl.java:143)
         at com.redwood.scheduler.ui.meta.page.MetaOverviewPage.getTabName(MetaOverviewPage.java:227)
         at com.redwood.scheduler.ui.meta.page.MetaTabPage.setTabPageNameType(MetaTabPage.java:94)
         at com.redwood.scheduler.ui.meta.MetaTabPageSetNameAction.performModelAction(MetaTabPageSetNameAction.java:49)
         at com.redwood.scheduler.ui.meta.MetaModelAction$ModelActionImpl.performModelAction(MetaModelAction.java:62)
         at com.redwood.scheduler.ui.model.impl.FormImpl.modelActions(FormImpl.java:730)
         at com.redwood.scheduler.ui.model.impl.LifeCycle.run(LifeCycle.java:226)
         at com.redwood.scheduler.ui.servlet.Servlet.handleRequest(Servlet.java:98)
         at com.redwood.scheduler.ui.servlet.Servlet.doPost(Servlet.java:54)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
         at com.redwood.scheduler.module.impl.ModuleFilter.doFilter(ModuleFilter.java:157)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
         at com.redwood.scheduler.security.filter.SecurityFilter.doFilter(SecurityFilter.java:613)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
         at com.redwood.scheduler.servlet.RequestCharsetFilter.doFilter(RequestCharsetFilter.java:197)
         at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    The error is in the admin guide
    No timezone could be found to calculate this TimeWindowElement. This means
    that the object that includes the TimeWindow should set the TimeZone to use
    for the calculation of the TimeWindow, or a TimeZone must be set on the
    TimeWindow or TimeWindowElement.
    I do not see how this would occur within the application list.
    Thanks,
    Edited by: Nick Katsoulis on Jan 17, 2012 6:39 PM

    Hi Nick,
    I think you have already received this info via OSS - In case anyone else encounters this same problem - This issue will be fixed in a future version of CPS, planned for the M33-April release.
    David

  • I upgraded from iPhone 3GS to iPhone 6.  Everything converted fine until I deleted an app in error.  When I downloaded it from iTunes, my account is no longer recognized by the app's host servers.  Can I go back and re-sync one app from my old phone?

    I upgraded from iPhone 3GS to iPhone 6.  Everything converted fine.  Yesterday I deleted an app in error.  When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion.  Can I go back and re-sync just one app from my old phone?  

    Try deleting what is called the iPod Photo Cache. 
    http://support.apple.com/kb/TS1314

  • I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano.  The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

    cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano.  The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

    Satellite L675-S7113 Specifications (PSK3AU-07C02S)
    Satellite L675-S7113 Support Page
    rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
    From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software,  play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
    Let us know what happens. Good luck.
    Mike

Maybe you are looking for

  • FS Matrox MXO2 Mini -- For Client Display

    Hello Folks, I'm selling a MXO2 Mini I have laying around on eBay. No minimum and no reserve, so it goes to the highest bidder. This box works GREAT with Adobe CS6, btw. And for anybody who might be interested, I'm also selling an Avid Mojo (original

  • Select query on two Database views

    Hi all, Can i fetch the data by writing a select query on two DATABASE VIEWS Because i am able to fetch data by writing a selct query on ONE DATABASE VIEW and ON TRANSPARANT TABLE but i am not able to fetch data by writing a query on TWO DATABASE VIE

  • Technical Issue while Exposing WebCenter webservices to SOA

    Hi All, The problem definition is as of below: We have two teams working separately on SOA and one on WebCenter. Scenario: 1.     SOA gives a WSDL, WebCenter creates proxy jar which contain the xsds in a specific structure 2.     WebCenter uses the c

  • Win2k DB service.

    Hi Folks, I want to alter the behavior of the Win2K DB service so that when I start the DB service (I have it set to manual) it does not automatically start the DB. I have looked into modifying the -STARTTYPE parameter via the ORADIM utility and the

  • E_ADEPT_NO_TOKEN

    Error appears when trying to download ebook to digital reader