Error 12700 when refreshing a VM properties

I'm in process of rebuilding our entire virtualization infrastructure and creation a new Hyper-V cluster. Currently our virtualization servers run Windows Server 2012 DC. The new OS should be Windows Server 2012 R2 DC. In addition, I'm trying to implement
a full-fledged SC VMM 2012 R2 management solution. The physical servers in question are Cisco USC 200 M3 blades with network adapters supporting several interesting technologies like VM-FEX (a proprietary Cisco solution related to the SR-IOV technology).
In particular, all the VMs on the existing hosts use VM-FEX virtual adapters to connect to the network. Unfortunately, this technology is not supported on Windows Server 2012 R2 (thanks to Cisco developers), so moving the VMs to updated hosts requires preliminary
replacement of the old virtual NICs with new ones that don't use this technology.
I've created a new Win2012R2/Hyper-V cluster (presently containing only one node) and connected it to my VMM server. I live-migrated several VMs from an old host to the new one using the Hyper-V Management Console (VMM refused to do it). I've discovered
that after migration VMM doesn't show their NICs in the VM hardware list (this part of VM inventory is completely empty as if there is no NICs at all). Any attempt to refresh configuration of those migrated VMs fails with the following error message:
Error (12700)
VMM cannot complete the host operation on the XXX server because of the error: The operation failed.
Unknown error (0x800b)
Recommended Action
Resolve the host issue and then try the operation again.
In the same time an attempt to refresh another VM running on this host which was created using the Failover Cluster Management GUI is always successful. The host server and Hyper-V cluster are also refreshed with no errors. So this problem is related
to the VMs, not to the host.
VMs running on the old server are extremely important, so I can't risk them having any problems in the future. Any ideas how to resolve this problem?
Evgeniy Lotosh
MSCE: Server infractructire, MCSE: Messaging

Well, I've discovered a way to solve this issue.
The VMs in question were live-migrated to the new virtualization host and immediately after that made highly available by creating a corresponding cluster resource. Removing their cluster resources (but keeping the VM themselves running) got rid of the error
during VM refresh. However, their NICs were still missing in the VMs properties in the VMM console. They appeared after I
shut down those VMs and refreshed them again in the VMM console.
Seems that it's somehow related to the live migration process. It might be, for example, a bug in Hyper-C tools which lose the old vNIC in the VM on the old host and can't switch to the new one (on the new host) on the run. Or it's just a bug in
VMM. So the correct procedure for live-migrating VMs from between hosts
must include a VM properties refresh immediately after it has been transferred to the new host and
before it's made a cluster resource.
Evgeniy Lotosh
MSCE: Server infractructire, MCSE: Messaging

Similar Messages

Still Error 2927 when refreshing Windows 2012 R1 Host

I have SCVMM R2 and the latest rollups. This issue is only occureing on a Windows 2012 (R1) server. I do not see these issues on Windows 2008 R2 or Windows 2012 R2.
I have looked at other forum posts with no luck such as: https://social.technet.microsoft.com/Forums/systemcenter/en-US/ccff7b77-6fc5-4c4b-bf71-a08a5076a3fd/action?threadDisplayName=error-2927-when-refreshing-host-cluster
I also have cranked up the MaxConcurrentOperationsPerUser to no avail.
After I restart WinRM and SCVMM Agent, it is ok for a little while then the errors and "This service has exceeded its maximum of 100 concurrent operations per user allowed for plugin "WMI Provider" error begin again.
Any other ideas?
Thanks,
Jason

Hi Jason,
According to the similar thread you have mentioned , and you have run the following command but still doesn't work ?
winrm set winrm/config/Service @{MaxConcurrentOperationsPerUser="400"}
Could you please run command below with administrator privilege to list the current settings of winrm :
winrm get winrm/config
(By the way , did you restart the server recently ? )
Best Regards,
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

An error occurred when refreshing the XI runtime cache

i did what is written in note 764176 but to no avail.
t-code sxi_cache shows
unable to refresh cache contents
error during chache refresh.
when double clicking this error
error category is blank.
error id is update.
can anyone help me with this please.

Hi Sas ya,
you can check this link.
problem with xi cache
or try this
Check the RFC Destination
INTEGRATION_DIRECTORY_HMI
After deleting this destination an create it again
everything work fine. This step is very errornous. Take care not to hit the enter key when specifying the user
and password.
Do exactly the same step as describe in the Installation
guide. The hint that it will not works is when you test
the connection and the system prompt you for user and
password again even if you have specified this data
already. In this case you do it wrong. Delete the RFC-
Destination an create it again and again until the test will not prompt you for user and password again!
In the xi "installation guide" you can find section:
"Creating RFC Destinations in the ABAP Environment"
rfc:INTEGRATION_DIRECTORY_HMI
take a look at tab:
Tab: Security/Logon
and text:
Save your entry now, before you switch to next tab, otherwise your entries may be lost.
if you're sure that is was done in a proper way (click by click) no need for change but only if you're sure:)
Select Basic Authentication Confirm both the popup and the warning.
As logon data enter the client of your SAP XI system and the user XIISUSER with the valid password
Save your entry now, before you switch to next tab, otherwise your entries may be lost. Press Enter to go to the next screen.
Or You can follow the links to solve your problem.
Re: SXI_CACHE fails to refresh
Re: SXI_CACHE in ABAP with ERROR
Hope this helps.
Regards,
Vijay

Error -2147218798 when refreshing Essbase

Hi,I try to refresh a outline in a Planning application and I have this error message :"Cannot refresh cubes while other users are logged on" I then disconnected every user, stopped and started the application but i does not change anything...What do you think of this ?Thank youPierre

It is probably a lock on the Planning Db rather than a user in Essbase still logged on. Run the unlockdb utility on your planning server under Planning\utils. It will unlock the planning relation database. You should be able to run the refresh then.Let me know how you get on.RegardsChris

Error 2927 when refreshing host cluster

We are running SCVMM 2012 R2 on Windows Server 2012 and it manages a 4 node 2012 Hyper-V cluster. I am receiving the following error when the job "Refresh host cluster" runs:
Error (2927)
A Hardware Management error has occurred trying to contact server Virtualsrv9.xxxxx.xxx :w:InternalError :HRESULT 0x803381e8:The WS-Management service cannot process the request. This service has exceeded its maximum of 100 concurrent operations per user allowed
for plugin "WMI Provider". Retry the request later or raise the Maximum Operations per User quota. .
WinRM: URL: [http://virtualsrv9.xxxxx.xxx:5985], Verb: [INVOKE], Method: [GetVersion], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/scvmm/AgentManagement]
Unknown error (0x803381e8)
This error never showed up before I upgraded to SCVMM 2012 R2, however it had been refreshing the host cluster just fine for a while after the upgrade, then it started to occur sporadically. I have been able to fix it when it shows up by restarting
the Windows Remote Management Service on the cluster nodes which automatically restarts the VMM agent service also.Why is this happening?

I was able to fix this issue by running the following command from an administrator command prompt on my hyper-v nodes and VMM server. I then restarted WinRM on all the servers and VMM was still cranky so I rebooted the VMM server and it has been working
since then. Hopefully it continues as it has only been a couple days.
winrm set winrm/config/Service @{MaxConcurrentOperationsPerUser="400"}
I have exactely the same issue. When I looked the winrm parameters of all the servers, the MaxConcurrentOperationsPerUser has already been set to "1500"

An Error Message when loading a Resource.properties File

Hi, all:
I tried to load a Resources.properties file in a JSP page:
<%@ page import="java.util.*" %>
<%
ResourceBundle rb = null;
try {
rb = ResourceBundle.getBundle("Resources");
} catch (MissingResourceException e) {
rb = null;
throw new RuntimeException("The resource is missing!");
%>
Test
When I run it, I got the following error message:
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
Any ideas what's going on here?
Thanks
Jeff

Hi,
I had a similar error just a few days ago. I could solve it by replicating the datasources again and activating the transfer structures via rs_transtru_activate_all. After that the load went fine.
regards
Siggi

Error in Cache Refresh(Unable to refresh cache contents)

Hi All,
When i am refreshing Cache from the browser using link CPACache/refresh?mode=full it says success.
When i do from SXI_CACHE it gives an error.
 Error during last attempt to refresh cache
 Unable to refresh cache contents
So when i run any schenario in message monitoring i get the following error-
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>http response does not contain a valid XML root tag</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I checked the INTEGRATION_DIRECTORY_HMI connection...
here the response which im getting is..
 HEADER NAME HEADER VALUE
response_line HTTP/1.0 200
server_protocol HTTP/1.0
status_code 200
status_reason
ragma no-cache
ache-control no-cache
ontent-type text/html
ontent-length 87
HTTP BODY
TITLE>Error</TITLE>#<BODY>#<H1>Error</H1>#FW-1 at nebula: Unknown WWW s
rver.</BODY>##
Time (ms) 17
I believe that is not the right response.
Everything was working fine yesterday when all of a sudden this error cropped up from no where.
Regards,
Rahul

Hi,
This is the error it shows there..
ERROR ID UPDATE
http response does not contain a valid XML root tag
Regards,
Rahul

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

Error when refreshing WEBI report with Universe Connection Type "SSO"

Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
Jonathan

Hi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

Error when Refresh Data on Webi from Infoview with Preferred viewing locale

Hi,
I am getting an error -"An internal error occured while calling 'processDPCommands' API. (Error:ERR_WIS_30270).
All the universes are translated to German using Translation Manager. I get the above error only when ' Preferred viewing locale' is set to 'German' otherwise the Refresh Data button works fine when the Preferred vieiwng locale is 'Use browser locale'.
As per the note 1352299 the settings on the Webintelligenceprocessingserver from CMC is adjusted and the heapsize is also adjusted but still the issue is coming up.
Could anyone please help to resolve this error.
Thank you & Regards,
Anima

hi,
I have faced this problem earlier and took lot of time for Root Cause Analysis and fixed the issue.
Root Cause for some of the objects not being translated is provided below:
If two objects has same translation in German, obviously Universe will not progress further for translation.
for e.g.
Objects in English and German
1.Country -> de county
2.Land -> de county
from the above example, two distinct objects in English have same German translation which makes Universe not accepting the duplicate objects within the same class.
Similarly, you need to figure out these duplicates at Class/Object/Condition/Hierarchy levels in translated XLIFF file.
Duplicates can be identified by opening XLIFF file in Excel and use Data Filters etc... This is a manual task.
Then for identified duplicates provide Other names in XLIFF file such that Universe accepts them.
For e.g. the above scenario can be solved by adding a trailing space to the 2nd translated object. Adding space is best option because meaning will not be changed w.r.t end user there by eliminating duplicates.
Regards,
Vamsee

Error when refreshing web intelligence document less then every minute

Hi all,
I get the following error, when refreshing document via javascript more often then every minute:
Server Error in '/Dashboard' Application.
FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: BusinessObjects.Enterprise.OcaFramework.ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Source Error:
Line 121:
Line 122:                    //Session["StorageToken" + strDocId] = doc.StorageToken;
Line 123:               doc = reportEngine.OpenDocument(intDocID);
Line 124:               //doc = reportEngine.GetDocumentFromStorageToken(storageToken);
Line 125:               doc.Refresh();
Source File: c:\inetpub\wwwroot\dashboard\document.aspx.cs    Line: 123
Stack Trace:
[ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
   at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA._WICDZProxy.initInstance(Byte[] p0, UTF8StringHolder p1)
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
[CommunicationException: The Web Intelligence server could not be reached. Contact your Business Objects administrator. (Error: RWI 00236)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
   BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller.InitInstance(String clientInfo)
   BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId)
   BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.OpenDocument(Int32 documentId)
   Dashboard.document.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\dashboard\document.aspx.cs:123
   System.Web.UI.Control.OnLoad(EventArgs e)
   System.Web.UI.Control.LoadRecursive()
   System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.2407; ASP.NET Version:1.1.4322.2407
I searched forum and google for this error, but I didn't find anything. Did you heard of this error? How can I fix it?
My BO Version is BusinessObjects Enterprise XI (without any ServicePacks). Is there a SP which fix this error?
Thank you for every idea!!!

Hi,
Copy File from Client system to server in same folder location .
Make sure in Edit Query option Editable & Refreshable options are checked .
Please check the links below .
Webi Excel Personal Data Provider Dynamic Data
How to create a webi report using excel as source
Excel as datasource in Infoview
Excel source located in Infoview

Error when refreshing workbook in BEx: Specific Macro CallBack not found

One of our users is getting the following error when refreshing any BEx workbook (in BI7):
Problems while calling the exit on refresh: Specified Macro 'CallBack' is not found in the workbook
This error suddenly started this week, everything was fine before that, and no changes have been made to the user's PC. The problem is specific to this one user's PC.
Any ideas?
-Jason

Hi,
It seems a common error.
There is a note that mentions the error, and was fixed since BI addons SP 8
Note: 1267942 - Custom macro not being executed on a workbook
Download and test the latest version: bi710sp12_1200-10004472.exe
This should fix the issue.
FYI: SAPGUI 640 is not supported by SAP since 2008. If you are using this version, please download the SAPGUI 7.10 as well.
Thanks
Edward John

Invalid Year error when refreshing the report with date prompt

Hi All,
I am working on BO XI 3.1 with Informix database.
When refreshing the report without any date prompt the report is running fine,but when applying the date prompt it is giving the error message
"Invalid year in the date".
I have tried changing the value in the advance tab of the object property to 'yyyy-mm-dd hh:mm:ss'
But it also din't work for me.
Please suggest.
Thanks and Regards,
Rishabh

Hi Experts,
Thanks for your suggestions.
Since changing the PRM file was not a fesiable solution for us.
We have manged to find a work around to solve this issue
We have created the filters at universe level with following formula for all the date objects which we ere using at report level as a prompt:
@Select(classname\objectname)=TO_DATE(@Prompt('Enter Date:','D',,mono,free,not_persistent), '%Y/%m/%d')
Although when we parse this formula it wil give an error message saying 'illigle operation',
still it will work when we use this at report level.
Thanks and Regards,
Rishabh

JCS-122017 Error When refreshing Application List

JCS-122017 Error When refreshing Application List
This issue started occurring when we migrated CPS from M28 to M33
We currently have M33.45 in Dev and are still experiencing the same error when refreshing the application list.
To replicate the issue, I can login, click applications, click the redwood folder, then click the refresh button within CPS and receive the below error.
[Errors found]      11:35:27 AM: JCS-122017: Trying to use non-attached object Application:2,472
Has anyone else had this issue, this appears to happen to all of the application lists when refreshing
JCS-122017: Trying to use non-attached object Application:2,472
     at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkHasSession(BaseSchedulerEntityImpl.java:853)
     at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkCanRead(BaseSchedulerEntityImpl.java:859)
     at com.redwood.scheduler.model.NamedRootObjectImpl.getName(NamedRootObjectImpl.java:143)
     at com.redwood.scheduler.ui.meta.page.MetaOverviewPage.getTabName(MetaOverviewPage.java:227)
     at com.redwood.scheduler.ui.meta.page.MetaTabPage.setTabPageNameType(MetaTabPage.java:94)
     at com.redwood.scheduler.ui.meta.MetaTabPageSetNameAction.performModelAction(MetaTabPageSetNameAction.java:49)
     at com.redwood.scheduler.ui.meta.MetaModelAction$ModelActionImpl.performModelAction(MetaModelAction.java:62)
     at com.redwood.scheduler.ui.model.impl.FormImpl.modelActions(FormImpl.java:730)
     at com.redwood.scheduler.ui.model.impl.LifeCycle.run(LifeCycle.java:226)
     at com.redwood.scheduler.ui.servlet.Servlet.handleRequest(Servlet.java:98)
     at com.redwood.scheduler.ui.servlet.Servlet.doPost(Servlet.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.redwood.scheduler.module.impl.ModuleFilter.doFilter(ModuleFilter.java:157)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.redwood.scheduler.security.filter.SecurityFilter.doFilter(SecurityFilter.java:613)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.redwood.scheduler.servlet.RequestCharsetFilter.doFilter(RequestCharsetFilter.java:197)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The error is in the admin guide
No timezone could be found to calculate this TimeWindowElement. This means
that the object that includes the TimeWindow should set the TimeZone to use
for the calculation of the TimeWindow, or a TimeZone must be set on the
TimeWindow or TimeWindowElement.
I do not see how this would occur within the application list.
Thanks,
Edited by: Nick Katsoulis on Jan 17, 2012 6:39 PM

Hi Nick,
I think you have already received this info via OSS - In case anyone else encounters this same problem - This issue will be fixed in a future version of CPS, planned for the M33-April release.
David

Error 12700 when refreshing a VM properties

Similar Messages

Maybe you are looking for