Error in communication channel sender JDBC AS400
The communication channel worked ok, but suddenly they began to give the following error:
Error during database connection to the database URL 'jdbc:as400://10.1.0.254/afildat' using the JDBC driver 'com.ibm.as400.access.AS400JDBCDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:as400://10.1.0.254/afildat': java.awt.HeadlessException.
The driver was installed again, but error persist.
Thansk
Hi,
This issue is due the Sender JDBC Server got restarted or down, check the server connectivity.
If you found still the issue then Stop & Start the communication channgel once, surely your issue will be resolved immediately.
Regards
Venkat
Similar Messages
-
Advance selection for source file-Error in communication channel monitoring
Hi all,
Referring to the link below:
<b>/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
I have developed my scenario in the same way.But due to the values <b><NOTHING></b>
in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
Plase note that our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
Thanks & Regards,
Sudhir TiwariSudhir,
In the sender file adapter, you have an option called <b>"Processing Sequence"</b>.
By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
Regards
Bhavesh -
Error in back routing Error in communication channel
Hi Friends,
I am sending the Idoc from ECC250 to ECC150 using XI, whenever I am sending the Idoc, I got this error Error in back routing Error in communication channel in SXMB_MONI.
In IDX2 also I got this error I:000.
Please suggest me how to resolve this issue.
Regards,
Shalini ShahDid you cross checked all the configurations are in Place.?
I understand that the idoc has been received from ECC250 ,Are able to see the payload (i.e idoc )
in SXMB_MONI ?
IS configuration steps like
Receiver determination,
Interface determination
are correct?
Rajesh -
Error in communication channel javaxresourse.Resourseexception
We are getting an error in communication channel javax.resourse.Resourseexception. We are send a payload witn size in excess of 10mb. I also have a message which is in delivering status for quite some time now after which our communication channel stopped working and startwd to give tthis error. Could it because of this message ? Or i need to increase size parameter . In which tcode or place wherei can see the permited file size. I am new to pi and and seeing this error for tje firat time . Request your help
>Could it because of this message ? Or i need to increase size parameter . In which tcode or place wherei can see the permited file size. I am new to pi and and seeing this error for tje firat time . Request your help
Go to SXMB_ADM and click integration engine configuration -> click edit mode configuration -> see the tuning parameter EO_MSG_SIZE_LIMIT set and value of it. If it not set, talk to basis to set the this tuning parmeter and value desired.
Search SDN on this topic for further details -
File to Proxy Scenario : Error in communication channel monitoring
Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
ChandravadanHi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani -
LMS 3.2 Internal Error in Communication Channel
Hello,
I am having an issue with the DCR in which I get the error "Internal Error in Communication Channel" after trying to edit the credentials of a device.
It started when I tried to add a device to the DCR, with all credentials, and it wouldn't show up in the DCR. I tried this 3x, but no luck. I was eventually able to do so by using the Bulk Import, and having the single device (with all the credentials) in the .csv file.
Now that the device is in the DCR, I need to edit the User Defined Fields - but when I try to, I get the error mentioned above.
I've seen other threads here that talk about multi-server setups, and FQDNs, but I'm not using any of that. I've also noticed that there is a bug ID for it, CSCtd07131, but it says 'release-pending'.
Am I up the creek until an update comes out? (its not just user defined fields, btw, I'm unable to modify any credentials.)
ThanksWhen you restart the ciscoworks processes you should always give a couple of minutes and log on when the cpu starts to come down.
If it continues to error when you add or modify you better open a case with the tac.
The bug you mention is only if you have multiple systems with a master and slave DCR
Cheers,
Michel -
Ciscoworks -- Intrenal error in communication channel
Hi Netpro Team,
I am getting an error "Intrenal error in communication channel" while editing or adding/deleting snmp credentials
in common services...(LMS-3.x);
We tried restarting the ciscoworks services, but still getting the same problem.
Please help to resolve this problemYes, Re-installed should take care of the issue..
However here the links for Patch (CS 3.3 and CS 3.2..apply which ever is applicable)
http://www.cisco.com/cisco/software/cart.html?imageGuId=9EE33249152B32176193349929E47597B46DC3C5&i=rs
http://www.cisco.com/cisco/software/cart.html?imageGuId=0C4F05EB3894563EC7BEC44C3E7D494AC34E9B88&i=rs
Thanks
Afroj -
DCR - error in communication channel
Hello,
We use LMS 3.1 with the available patches installed.
I wanted to configure some device credentials and identities.
After clicking "Apply" the following error was displayed:
"Internal error in communication channel."
I attached the dcr.log for further information.Hello!
I am having the same problem - sometimes I get the error message - sometimes not.
I am having on-access virus scanning enabled and do not want to disable the scanning on the NMSROOT directory.
Can you tell me the name of this process that causes this conflict?
Then I could disable the virus scanner for this process!!
Thanks! -
Corrupt communication channel (FILE/JDBC) still polling "without success"
Hi all here are a lot of questions with high priority:
We have problems with adapter engine XI7.0SPS11.
It looks that if there is a short connection error some of our channels are still polling (status green) but they do not get the data.
After restart J2EE engine it works. But this is not good.
I refreshed all caches and restarted the file and jdbc service in NWA without success.
If I create a new communication channel and change the sender agreement it works.
But this is only a workaround.
Does anybody know this issue?
Is there a way to solve it (without daily restart of J2EE engine)?
We will patch our system to SPS18 but can we ensure that the bug is fixed?
Currently one FTP channel get the error u201CCould not process dues to error: com.sap.aii.adapter.file.ftp.FTPEx:550 150722_ No such file or directoryu201D
How can I refresh the channel u201Ccacheu201D so that he looses the history of polled files?
Thanks DanielHi,
Check it..
>>>>I had made some changes to the communication channel - made it active, inactive, changed the polling interval.
After the Changes activate your changes.
Regards
Agasthuri Doss -
Error in communication channel " not initialized"
Hi All,
I'm working in FIle to mail scenario. In this scenario whenever i upload a text file to the R/3 application server. that file should be sent (as a attachment with a mail) to any email id. I did all the required configuration in IR. but i'm verymuch confused in ID configuration. I have created both sender and receiver communication channel in the same business system which refers a sender (R/3) System.sender communication channel is working fine. but when i activate the receiver communication channel it shows an error "not initialized".
So kindly let me know,
1. Should i use business system for my receiver end?,If so how do i create it?
2. is receiver agreement, receiver determination, interface mapping necessary? If so, how do i configure it? because i'm not using any recever service since i'm sending mail to my mail box.
note:
It would be very helpful if u refer any link to find out the recever determination and interface determination configuration for this type of scenario.
Thanks & Regards,
hari.Provide us the XML formed after mapping.
make sure that the msg type name is Mail and the name space name is http://sap.com/xi/XI/Mail/30.
regards
krishna -
Error in communication channel AS2 Seeburger EDI Adapter
Hi,
I am facing one issue in communication channel at receiver side. Adapter type is AS2 Seeburger EDI adapter.
Brief overview of scenario: Sender is R/3 sending an IDOC and Reciever is Party (Vastra_Gotaland).
The error in reciever communication channel is : Error type: REPORT_ERROR >> Error date: 8/26/10 10:18 AM >> Description: MIC not verified # integrity-check-failed [8/26/10 10:18 AM].
Please give your important feedbacks.Hi Vikrant,
I have already checked channel configurations and there is no problem with signing certificate. I have checked that also.
Edited by: Sadhna Achhra on Aug 26, 2010 1:10 PM -
Error in Communication Channel Monitoring
Dear All Experts ,
we are getting the below error message while posting the transaction in the communication channel monitoring. Pls advise to resolve the same.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIServer/UNKNOWN/ADAPTER.JAVA_EXCEPTION - com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=ae1e4075a0063170895328ec6f70c70d; at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId(AbstractLookupManager.java:173) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:431) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81) at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:461) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:243) at com.sap.e
Regards
Machindra PatdeHi Machindra,
Check if the channel name specified in sender/receive agreement is correct.
If yes then delete the particular channel and create new one and specify that one in the agreement. -
Error in communication channel FIle to SFTP
Hi All,
My scenario is File to file. Sender is File and receiver SFTP.
I am getting below error in RWB communication channel monitoring
Could not process due to error: java.lang.NullPointerException: while trying to get the length of an array loaded from local
variable 'dirList'
Please provide you suggestions on this. Why does this error occurs. Earlier it works fine. Today only I am getting this error.
Regards,
SaravananHi
Can you please check access right of SFTP folder please also check notes 1673907 - ERROR:while
Regards,
Amit -
Error in communication channel in PI 7.1 Server
PI 7.1gives the error shown below when I check the status of the communication channel in the Run Time Workbench. .
Error: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.
This occurs after I restart the system , before the restart everything seems to be working fine . This is a vexing problem which is recurring.
I have tried the sap notes
764176
809420
97860
1031321
1117249
1444430
1506101
That includes
1. creating a BS system for the JAVA AS
2. restarting the rwb/adapter/dir/repository etc components
3. releasing locks
4. delayed start of jco etc .
Can anyone suggest a possible solution . would installaing PI 7.1 EHP1 make the SLD problem go away ?
regards
Rajarshi MuhuriHello
It is always recomended to run in the latest EHP. Please refer to the following URL's regarding same:
http://service.sap.com/sp-stacks (SAP Support Package Stack information) and
http://service.sap.com/patches (patch information).
SAP note 19466 will also assist here and following the updates please re-test and reply if further help is necessary.
Regards. -
Error opening communication channel in PI 7.1
Hi All,
I am getting an error while opening communication channel in PI 7.1
The error is:
Attempt to access the 1 requested objects on 1 failed. Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object
Adapter Metadata File | http://sap.com/xi/XI/System, type AdapterMetaData
from application REPOSITORY on system REPOSITORY failed. Object does not exist.
Detailed information:
Software component version with key ID: 3b787a8035c111d6bbe0efe50a1145a5 not found
Can anybody please help me to fix it?
ArindamHi ,
Please check the note mentioned below.
Note 1337902 - Missing object after PI cache refresh for existing ESR obj.
Thanks
Rishi Abrol
Maybe you are looking for
-
10.6.8 stops me importing photos from Olympus camera
1. Recently bought a new Olympus VR310 digital camera. I couldn't get either Image Capture (6.0.1) or iPhoto (9.1.5) to import images from day one, onto my Mac Mini running Snow Leopard 10.6.8. However, if I took the SDHC card out of the Olympus an
-
Aiport Extreme (N) & Video Playback
Hi there, I have an external HD hooked up to my Airport Extreme base station. I have my iTunes library as well as some movies. When playing songs in iTunes wirelessly from the base station I do not have a problem, no loss, music plays smooth. However
-
How to get first day of calendar week ?
hi, i'm storing some calendar weeks in my database. for example 30/2013. How can i get the first day of this week (monday)? in this case it is 22.07.2013 thx Anja
-
Hide filename ext when saving?
This might be a simple prefrence setting but I can't seem to make it work. In CS5 and I go to "save for web" like I would when I was on CS4. A lot of times I will click on an exsiting file so that file name will auto fill the new save name and then i
-
Is Custom Style Sheet Working?
I'm trying to use a custom style sheet, in order to block ads, but I don't think it works in this version of Safari. (on OS X 10.4, I use a custom CSS file and it works great.) In the Windows beta, it does nothing. I even tried a simple custom style