Error in return order

In the Handling Of Returns scenarios, when I try to create returns order w.r.t to billing doc,
I am getting this error u2018u2019The Copy Routine number for the table VBPA is missing in the table TVCPAu2019u2019

Hi,
Kindly check the copying control at IMG->Sales and Distribution->Basic Functions->Free Goods->Maintain Copying Control.
Thank You,
RB

Similar Messages

Getting error in return order as free goods are not copying

Hi
We are facing error as free goods are not copying in return orders,We have done upto the billing and creating return order with the reference of billing
Many Thanks
Rakesh Naveen

Hi,
Kindly check the copying control at IMG->Sales and Distribution->Basic Functions->Free Goods->Maintain Copying Control.
Thank You,
RB

Error during return order creation in CRM online

Hi all,
When I create return order via transaction CIC0 with reference to standard order ( B2C ) then some times system gives error after saving the return order. The text of the error message is very confusing , It says"
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
"Transmission log
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Document xxxxxxxxxx doesn't have document category but (Notification E V2 068)
Sales document xxxxxxxxxx was not changed (Notification E V4 219)"
I have tried to replicate this return order with all the available tools but during save this message is coming from R/3.
Regards,

I would suggest you to try to create a return order in R3 system (from where the error is coming) with the same parameters.
Usually that should give you the same error... Resolve the issue, then try to create order in CRM online. Now error should not be there.
Regards,
Kaushal

Error during return order

Hi experts,
When i am creating return order the partners not copied from the billing document also iam unable to create delivery document it gives error saying Error during partn : partner role SH. order cannot be delivered.can any one throw some light on this.
Thanks in advance
Sanjay

The following could be reasons for this error:
- If this is a common error for many return documents, then it could be a customizing issue:
1. Incorrect config of Partner Determination procedure for the Returns Order where partner function SH has not been defined (as Sadhu has mentioned above)
2. Incorrect copying routine from Billing to Return Order in tx VTAF (again as Sadhu has mentioned)
- If this is only a one time error occurring only for this Invoice, then problem could be with Master Data etc:
1. Ship-to party has deletion flag
2. Returns order has a different Sales Area as compared to the Invoice

Error while creating return order(Complaint) in IC web client

Hi SAP Experts,
I am getting following Error while creating return order(Complaint) in IC web client.
Error when processing your request
What has happened?
The URL http://sapcrd.comfort.com:8000/sap/bc/bsp/sap/crm_ic/default_delta.do was not called due to an error.
Note
The following error text was processed in the system CRD : Exception condition "NON_EXISTING_HANDLE" raised.
The error occurred on the application server sapcrd_CRD_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: PRC_PD_HEAD_ADD_COND of program SAPLPRC_PRICING_API
Function: CRM_PRIDOC_UPDATE_EC of program SAPLCRM_PRIDOC_COM_EC
Form: EXECUTE_CALLBACKS_PLANNED of program SAPLCRM_EVENT_OW
Function: CRM_EVENT_SET_EXETIME_OW of program SAPLCRM_EVENT_OW
Function: CRM_ORDER_COMPLETE_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_MULTI_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN of program SAPLCRM_ORDER_API
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
Method: IF_EX_ORDER_SAVE~PREPARE of program CL_EX_ORDER_SAVE==============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CRD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapcrd_CRD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server sapcrd_CRD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 330 -u: VORUSX -l: E -s: CRD -i: sapcrd_CRD_00 -w: 2 -d: 20080324 -t: 021723 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Maximum points will be awarded for useful information.
Thanks,
Rony

Hi,
I notice there is a Z class being called.
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
You should check this customized class.
Cheers,
cady.

Error while creating Return order with reference to Complaint

Hi,
We are using Complaint Management in CRM Service. After creation of Complaint, we want to create Return Order that is going to replicate in R/3 .
We are able to create Return request in CRM as a follow up document. However we are not able to replicate the return order in R/3.
We have created Return Document type CRMR in R/3 with related Item Category REN assignment & corresponding number ranges assignment.
We facing problem, as this document is not getting replicated in R/3 & in Complaint, it shows message as "The document is being distributed at the moment, and therefore cannot be changed. The document will be ready for input once it has been distributed successfully.
In SMW01, it is showing as fully processed document. However in error segment it shows as error No upload into R/3" &"R/3 Adapter is called".
Could please suggest any configuration we have missed or additional configuration to be done?
Regards,
Arun

Hi Arun,
Have you check & maintained middleware setting for document transfer
(tcode R3AC1). Check object SALESDOCUMENT and try maintain transaction
type there. Don't forget to activate use tcode R3AS.
hope this helps.
Gun

Returns Order error

Dear Freinds
I am trying to create a returns order, wrf an invoice, which is released to accounting & 'cleared'. [Accouting document NOT reversed]
Now, the question is, To create a returns order,wrf invoice, *is it mandatory* to reverse the corresponding accounting docuement?
Because, I am getting the error," Entry PN8 does not exist in TVV1 (check entry)"
Any help/clue..?
Rgds
Sumanth.G

Hello Sumanth,
Sorry for misinterpretation.
Reversing the cleared accounting document is not neccesary for creating return sales order with reference to Invoice.
I wrote return sales order instead of invoice.
Also the solution provided by one od our expert is working for me. I just tested the same in IDES Test system
Thanks again!!
Tushar

Strange Error Message In Return Order - (CRM B2C Internet Sales)

I have a strange error message when creating a return order with reference to a standard order in internet sales B2C scenario.
err message: Document 900038963 doesn't have document category but (Notification E V2 068)
and the standard order 900038963 is error free.

Hi,
I notice there is a Z class being called.
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
You should check this customized class.
Cheers,
cady.

When I am making return order on cancelled invoice system should give error

Experts,
In this scenario I have cancelled the invoice 1234567 and when I am creating return order with reference to the cancelled invoice 1234567,system is accepting it
Is there any process where the system should give the error
Regards
Kiran

Hi,
you should go for enhancement,use the exit MV45AFZZ
Pass the XVBAK - VGBEL to VBUK - VBELN and check VBUK - VBTYP = N (Invoice cancellation) system throw an error.
you can specify the message Ex: Return order can not be processed in spite of cancelled invoice.
take ABAPer help.
Regards
Ram

Error in Creating Return Order

Dear Frnd,
While creating the Return Order with Reference getting the below error message:-
Copying from sale document type RO (Rush Order) to RE(Return) is not supported.
Anybody can help me on this issue.
Regards,
Ashima

Hello Ashima,
Well, check with your business whether U want to create the RE wrt RO or Invoice, F2.
Assuming, it is VTAF--The settings depends would be specific business. However, check this
Header:
DataT: 052.
Data T:103.
DataT: 003.
Copying Reqmnts: 021.
Mark Copy item no.
Item:
Item categories are purely proj spefic, generally REN is for Returns.
rest, Copying reqmnts: 303, DataT 1st one: 153, 2nd: 104, 3rd:004. Update doc flow--X.
Pricing Type: N.
SL:
SL categories also would depend on ur reqmnt, since this is Returns no MRP is required..put appropriate SL Category.
DataT: 201, Copying reqmnts: can be blank.
Plz note that U've to analyse ur business reqmnts for your case before settings. The above is only a suggested example.
I hope this helps, if so, plz assign suitable points.
Rgds,
Raghu.

Error in : Purchase order Creation using BAPI_PO_CREATE1

Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
* Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
* Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

Hi Shareen,
I think in the following parts of the code,
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa.
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi
 poitemx = i_bpoix
 poschedule = i_bpos
 poschedulex = i_bposx.
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001 904 1110500002 does not exist (Check your entry)"
This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
Please advise on how this process should happen.
Regards.

Hi TQ,
Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
Can you elaborate more in detail how you solved your error few months ago?
Thanks and regards

There is an error in the order submission.

Hi,
While placing order in iStore(11.5.7 vis) i got the following error."Error messages from Order Management. The item specified is invalid or does not exist in the warehouse you specified. Please Enter a valid item- warehouse combination. Invalid unit of measure for this item. There is an error in the order submission."
The item was created only in the master inv org (V1) and not in M1.The error appeared only when placing order in istore and not in OM since warehouse was explicitly chosen. After assigning the item to M1 the order was placed without any error in istore.
Would like to know why istore picks up item particularly from M1.Is there any profile option or setting?
Thanks & Regards,
Nithya

symptom: The item specified is invalid or does not exist in the warehouse
you specified.
Please enter a valid item-warehouse combination
change: Note Role : Navigation -> Order management -> Order return -&
gt; Import order -> Correction.
cause: Internal ordered enabled flag not checked for the item
fix:
Check the internal order Enabled flag for the Item
Thanks
Naveen

Return Order creation referanace to billing document.

Hi , Experts,
I have one issue regarding return process , Pls do the needful ASAP.
My question : I have created one direct sales order , After thet i have created PGI & billing , But after created billing document , I want to take return taht goods, So i had created return for same sales order quantity, & also created credit memo. But my problem is, that system allow me futher create return sales order with referance to billing document no. At a return order creation time system only give warning message - (There are already returns for item 000010: 2 EA)
& allow to save return document no. But i want to erroe message after take return all billing quantity. Can any body suggest me, what is the customizing require for this,
Thanks a lot in advance.
Regards;
Happy

Hi, abdul sir,
Here no any error message, My problem is that , why all line item comes in delivery, B'cause i had already deliver 5 line item out of 10 item, Here system take delivered line item with 0 quantity, I don't want that delivered line item at a time in delivery,
Regards:
Happy

Return order creation.

Hi, Expert,,
My issue:
1 ) I had create sales order for 2 Quantity.
2 I had completed PGI for 2 Quantity
3 ) I had complleted billing for this 2 Quantity,
But after billing customer want to return,
then
1 ) I had created return order with references to billing no - for 2 Quantity
2 ) I had completed PGR.- for 2 Quantity
3 ) I had created credit memo for - for 2 Quantity
But by mistake user - created two times return process for that billing document no,
User receive worning message at a time return order creation - is There are already returns for item 000010: 2 EA
But i want to set error message if user create more quantity return order wrt to billing no.
Can anybody send me it's solution ASAP,
Thanks a lot in advance
Regards:
Happy

Hi ..
Since user is creating returns with reference to billing doc , he will not be able to create more quantity than in billing doc.
if he try's it will give error message , since in your case there was already a return order excist that why the erro message displayed an order already excist.
Hope it helps
jinoy

Error in return order

Similar Messages

Maybe you are looking for