ERROR ITMS-9000:"Redundant Binary Upload. There already exists a binary upload with build version '1.1' for ipa '1.1'".

ERROR ITMS-9000:"Redundant Binary Upload. There already exists a binary upload with build version '1.1' for ipa '1.1'".
I need to change the build number, but not the version number. So I can upload a new build for same version to ITC. What step should I do in FB4.7?

Hi mobisa,
Can you try the solution in this post? ios - ERROR ITMS-9000: "Redundant Binary Upload. There already exists a binary upload with build version '1.0' for train…
Thanks,
Preran

Similar Messages

ERROR ITMS-9000: Missing Code Signing Entitlements when adding app to Apple App Store

My client is getting the following error when sending my app (compiled in Flash Pro CC 2014 with AIR SDK 15.0.0.356) to the Apple app store:
ERROR ITMS-9000: "Missing Code Signing Entitlements. No entitlements found in bundle
'com.xxxxxx.xx.xxx' for excutable 'payload/xxxxx.app./xxxx'.""
He is saying that I need to send them the entitlements file.
I can't find out any information about this with regards to Adobe Air compiled iOS apps, apart from this old post:
Adding iOS entitlements to AIR apps
which states that 'the packager configures the entitlements file '
Can anyone explain what might be missing here?
Thanks,
Alan.

It looks as if this problem is solved by doing step 2 from here:
http://dev.mlsdigital.net/posts/how-to-resign-an-ios-app-from-external-developers/
It basically states that the client needs to produce the entitlements file and lists the following that the client will provide themselves:
A “Mobile Provisioning Profile”
An “Entitlements.plist”
An “iOS Distribution Certificate”
iReSign OS X app (or you could use command line)
Hope this helps someone. We've run into quite a few problems trying to get the Flash Air compiled App to both enterprise and Apple Store as it can't come from us (the developers) it has to be signed and delivered from the client.

There already exists an organisation

when i am trying to install exchange 2010 on 2008 r2 member server, readiness check is failing at organisation prerequisites asking to modify AD with setup /prepareAD. when i ran prepareAD i get the following error.
Exchange organization name cannot be specified. There already exists an Exchange organization with name 'XXXX'.
i think this is because of my earlier unsuccessful attempts of installing exchange. can someone help me to get pass this. thanks
can i give the other name? or can i delete the organisation from ADSIedit?? what ever it takes, i need to get exchange up n running by this Sunday. cheers

Hi,
You need to remove the Exchange Organization object in the Configuration partition of your Active Directory forest;
The easiest way to accomplish that is firing up the Active Directory Sites and Services console, enable the viewing of the "Services" node (disabled by default), then delete the node called "Microsoft Exchange"
(under which you will have another node representing your organization).
You can also do the same thing using ADSIEdit and connecting to the Configuration directory partition.
You should also remove the OUs "Microsoft Exchange Security Groups" and "Microsoft Exchange System Objects" from Active Directory.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error :This database already exists and is not a supported version of MBAM.

While installing MBAM 2.0 SP1 i get the following error ,screenshot is attached.
This database already exists and is not a supported version of MBAM.
System set-up
Server 2012 on which SQL 2012 SP1 is installed.
Adding MBAM Audit , recovery and compliance features.

Change the name of the database to:-
- For Recovery database - "MBAM Recovery and Hardware"
- For Compliance Database - "MBAM Compliance Status"
While installing the MBAM DB features and then try. Don't change the default names or use any custom name for DBs.
Gaurav Ranjan

ERROR ITMS-9000 "The bundle uses a bundle name or display name..." when uploading to iTunesConnect

I'm receiving the error "ERROR ITMS-9000 "The bundle uses a bundle name or display name associated with an Apple app." when uploading to iTunesConnect.
Version 1.0 or our app is currently on the App store, an I'm trying to upload a version 1.1.
I'm trying to change the name of the app from "Augsburg Now" to "Augsburg Gallery".
I changed the name in the App ID on developer.apple.com to "Augsburg Gallery, but left the ID as edu.augsburg.augsburgnow
I generated new Development and Distribution provisioning profiles, since the App ID name had changed.
In DPS App Builder, I changed the App name to "Gallery", and the Title (library view) in DPS App Builder to "Augsburg Gallery", and then created a new binary.
I changed the App Name in iTunes connect to "Augsburg Gallery"
I don't see the problem, since I left the bundle id, app id, etc. all unchanged.
Any ideas?

It sounds like you did everything right, Keith. I just did a similar thing recently to change my app name from "Digital Publishing Suite Tips" to "DPS Tips," so I know it's possible. In iTunes Connect, you submitted the app as a new version, not as a new app, right?
I would try building a new app and submitting it again.

ITunes Producer ePub Upload Error ERROR ITMS-9000

This is the iTunes Producer ePub Upload Error:
ERROR ITMS-9000: "Unable to unzip input: null" at Book (MZItmspBookPackage)
How do I fix this?

Hi. Me too, I have the same problem. Did you solve it?
The epub is validate with epubcheck, it is also possible to read it with iPad, watching regularly the videos, but apple store doesn't approve it.
Is there anybody who can help?
Thanks

I successfully uploaded a book using iBook Author. I need to make a correction. I keep getting this error message: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage)

I appreciate any help or assistance. I have been trying to update one of my books for for the past few days with no success. I really just need to change two letters. But since I was updating I thought I would make a couple more improvements. I clicked disable portrait and made my pictures a little bigger to fit the whole page. But now I keep getting this error for multiple sound effects throughout the book. ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage). I did not change the audio. The audio files are placed in widgets. I had no problem the first time it uploaded. I have recreated my whole book from scratch and it still does not work. Does anyone have a suggestion? Thank you for your attention to my question.

Florida author wrote:
Could it matter that I am dragging my audio files onto my document? They appear to be in a widget once dragged in. I use the widget insector to make changes. However, I did not go to the top of the screen and click widget and then insert my audio file.
I don't believe that would make any difference. Drag-and-drop is just a UI shortcut for using the menu items.
Also some of the audio file were used in previous books. Would that cause an error?
No. Each book is a stand-alone entity. It doesn't matter if the same audio file appears in another book.
From what people have reported here, it looks like there is a bug in the submission system. Other than trying the suggestions posted in the linked-to thread, I don't think there is anything you can do to fix it.
I would submit a bug report to Apple though. Quite a lot of people seem to be affected by this problem, and if they hear about the same problem from lots of different sources, that will (presumably) elevate the importance of fixing it.
Michi.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

App upload: ERROR ITMS-9000

Hello world -
I'm attempting to upload a DPS app to iTunes; it was built in Adobe App Builder. Upon upload, I'm getting the following error:
ERROR ITMS-9000: "Invalid Code Signing Entitlements. The signature for your app bundle contains entitlement values that are not supported. For the 'com.apple.developer.ubiquity-container-identifiers' entitlement, the values in the array must start with the prefix provided by Apple in the provisioning profile, followed by characters that are uppercase or lowercase Roman letters [A-Z, a-z], the digits 0 through 9, dot ['.'], or hyphen ['-'], and not contain any wildcard characters. Specifically, value '7R584CUE64.*' for the key 'com.apple.developer.ubiquity-container-identifiers' in 'viewer.app/viewer' is not supported."
I actually get a variant of the same error, as well - just swap out the entitlement chain for "com.apple.developer.ubiquity-kvstore-identifier".
I can't find an asterisk on that value it's referencing anywhere. Can y'all lend a hand?
Thanks.

If anyone else has this same issue, try this fix. Just worked for me:
http://stackoverflow.com/questions/7656318/contains-entitlement-values-that-are-not-suppor ted

Error ITMS-9000: Invalid Segment Alignment

Hello everyone,
This is my first time submitting an app to the app store. I've done ad-hoc distribution before, but my client needs this app on close to a thousand of their iPads, and they have corporate offices everywhere, so B2B is the way I have to go.
Everything is built and tested and works fine. Certificates and Provisioning Profiles are all fine. I am at the last possible step and when I go to submit the .ipa file in Application Loader 3.0, I can't shake this message...
ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have the proper segment alignment and should be rebuilt with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."
Here's the details...
The app was built in Adobe Flash CC 2014 using AIR for IOS 14.0. I used my PC for the actual building/publishing of the app and then transferred the .ipa file to my Macbook when I tested it and everything was finalized by the client. Application loader will not let me deliver the app to iTunes connect for submission. I keep getting this error.
I've tried everything I can think of. I've installed Flash CC on my Macbook and tried publishing again. All the Certificates and Provisioning Profiles were made and downloaded on the Macbook. I've tried submitting .ipas that were published in AIR for IOS 14.0 and 13.0. I've tried uninstalling xCode 6 and Application Loader 3 and using older versions. So far, nothing has worked.
Has this happened to anyone else? I'm really in a jam here. My client needs their app and I can't fix this last issue. It's very difficult because Adobe Customer Support says that the problem is Apple's Application Loader since the app works fine and distributes without problem ad-hoc. Apple Customer Support says they can't help either, since the app was built in a 3rd party software and not in xCode. If anyone can point me in the right direction, that would be amazing.
Thanks,
Lee

There's a huge issue with this on Adobe's developer forums.
This issue is happening to people everywhere, and it's only been happening for about 20 days or so. Before that Flash CC apps uploaded fine.
There is a successful workaround to the problem that a couple of guys came up with, but it's all terminal coding kind of stuff, and that's miles beyond my comprehension. That kind of coding is way past me, which is why I built it using Flash to begin with, because Action Script is simple. It would take me longer to figure out the work around that it did for me to build the app itself. lol
Any other ideas???

ERROR ITMS-9000 with remote MP4 video

Hello,
We have created an ePub and we are trying to publish it with iTunes Producer. The book contains embeded videos. The videos are not included in the ebook but hosted remotely since they total 1.5 GB and we need to mantain the ebook size very small.
When we try to upload the epub file, we get the following error from iTunes Producer :
ERROR ITMS-9000: "Error Parsing file /OEBPS/http://www.ourwebsite.com/ebookname/videos/video.mp4" at Book (MZltmspBookPackage)
Any suggestion on how to solve this problem ?
Thank you

Hi. Me too, I have the same problem. Did you solve it?
The epub is validate with epubcheck, it is also possible to read it with iPad, watching regularly the videos, but apple store doesn't approve it.
Is there anybody who can help?
Thanks

ERROR ITMS-9000 "File given does not match type JPEG....

I'm trying to upload our iBook. I first did an export outside of publish, then did publish and reloaded everything under the .itmsp file publish created. About 10 minutes into the upload, I received a message that read:
1 Apple's web service operation was not successful.
2 Unable to authenticate the package ISBN#...:itmsp
3: ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@387eb9b2[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
4 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@6bad662[userString=Thi s file does not start with a start of image marker.] at Book (MZitmspBookPackage)
5 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@450fcee3[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
6 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@69c736ea[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
7 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@15e672e7[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
8 ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@4c812a6ec[userString=T his file does not start with a start of image marker.] at Book (MZitmspBookPackage)
9ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues:
Error=com.apple.jingle.leghorn.fileformat.ValidationError@54180fd6[userString=Th is file does not start with a start of image marker.] at Book (MZitmspBookPackage)
Any suggestions would be greatly appreciated.

I had done screen shots on the iPad and then emailed them to my Mac. I then worked to cut the black bar off the top, but some how Photoshop wasn't saving them correctly. I couldn't even reopen them in PS. So, I downloaded them again, went back in, saved them as .jpegs and then reuploaded. That solved it. It was quite bizarre.
Now trying to get the description listing right in the iBookstore.
I wrote the piece out, I thought in TextEdit. Then pasted it into the box in iTunesProducer. When I was getting the error message above, it also was saying that there's a 4,000-character limit. So, I copied it into Pages and did a character count and saw 3,887. I still had to cut about 500 chactacters out. Support responded and said I was still very close to the limit, so I don't know what it was they were counting. My Pages counter said it was close to 3,300....
My problem now is that they have bullet points on lines with no text now. They've fixed it from how it was first diplaying. So, I'm trying to get that cleaned up. It's their fault, but it looks like me, the publisher, is the one who is clueless......
Here's the link to our iBook!
http://itunes.apple.com/us/book/2012-science-prophecy-ancient/id555557425?mt=11

ERROR ITMS-9000: "META-INF/container.xml must contain one and only one root file reference."

Hi all,
After correcting a table-of-contents error in my .epub file, I am unable to upload it via iTunes Producer. It lists this error message:
ERROR ITMS-9000: "META-INF/container.xml in 9780615431727.epub must contain one and only one root file reference." at Book (MZItmspBookPackage)
The file has been verified and only has one root file reference in the container.xml file.
Has anyone been able to find a solution to this problem?
Thanks!

Hello Forum Users…
For those of you who have run into the upload roadblock, getting an error message similar to this:
Package Summary:
1 package(s) were not uploaded because they had problems:
          /Users/slm/Desktop/MUSIC to PICTURE for IBOOK/2012 MTP for iTUNES Bookstore/9780615600918.itmsp - Error Messages:
                    Apple's web service operation was not successful
                    Unable to authenticate the package: 9780615600918.itmsp
                    ERROR ITMS-9000: "OPS/ibooks.ncx(5): 'p50': fragment identifier is not defined in 'OPS/content9.xhtml'" at Book (MZItmspBookPackage)
Following is a "specific" fix, but the idea of the fix will help you with your specifics too.
I tried for 17 days to upload a book that looked and worked perfectly in iPAD via Preview.
After many discussions with Apple, who to their credit stayed with me over 2-3 days, I decided to play a hunch.
I went into a duplicated copy of the book and on every page, (because the error message was not telling the whole story), looked for what InDesign would call "Overset Text."
Now... the "flaw" in iBOOK Author (hint) is that it won't advise you of this "overset text" as does InDesign.
And to compound the matter, the exported ePUB document WORKS in iPAD Preview.
See Screenshots from InDesign:
Okay... Couldn't add it but it is a Warning Box that says there is overset text. (Characters which exceed the text box.)
Nevertheless, I played this hunch, and sure enough found a few boxes with the + in them. In other words I clicked on EVERY text holder and every text block in the entire document.
Where I found + signs, I simply deleted some carriage returns from the iBOOK file... (please note… carriage returns and literally empty spaces that caused the overset text) and then erased all previous copies of the Music to Picture Book on my hard drive, iTUNES and iPAD.
The result? A "text-book" upload with no snags! As my Son would say… "Victory!"
So, first make sure that you are using only PNGs, Jpegs and Movie files to iBook Specs. Then... make sure there are no overset text boxes, which you must do manually.
Enjoy & Godspeed!
Steve
Stephen Melillo, Composer
STORMWORKS®
209 Spinnaker Run
Smithfield, VA 23430-5623
USA
v/f 757-356-1928
stormworld.com
“History is a vast early warning system.” Norman Cousins, editor and author (1915-1990)
"This will be our reply to violence: to make music more intensely, more beautifully, more devotedly than ever before." Leonard Bernstein
“If you have a chance to help someone, and you don’t, you are wasting your time on this earth.” Roberto Clemente

Error ITMS-9000 Index:0, Size: 0

Hi,
I've spent 30 days for this "Error ITMS-9000 Index:0, Size: 0".
I made a validation test before I delivered my book package.
No problem, it's OK.
I think since last update in OS X(March, 2013) this problem started.
Today, after Java and Safari update, the same error.
Whan can I do?
1 package(s) were not uploaded because they had problems:
/Users/carllro/Music/iTunes Producer/Playlists/9788999002519.itmsp - Error Messages:
Apple's web service operation was not successful
Unable to authenticate the package: 9788999002519.itmsp
ERROR ITMS-9000: "Index: 0, Size: 0" at Book (MZItmspBookPackage)

After re-initializing, the porblem is solved.
I Would like to share our findings:
The monitoring application includes an embedded Apache Derby database, often referred to as the “trending database”, where monitoring information is stored by default.
Somehow this Apache Derby database database got corrupt: as a reference we checked our TEST environment and every time we restarted SAPBO, there was a file in the derby database named, dbex.lck and db.lck which was refreshed. We assume these ae lock files which is created at startup. But on the development environment, these files weren't refreshed at startup, they were too old. before re-initializing CMS, we stopped the node, deleted the dbex.lck and db.lck.files, started CMS but there were no dbex.lck and db.lck.files. So, we assumed the Derby database got corrupt.
After re-initializing, the porblem is solved.
Thank you all
Cheers
Sem

Error ITMS-9000:"Unable to analyse: page1.xhtml" - Probably caused by Greek characters

I get an "Error ITMS-9000:"Unable to analyse: page1.xhtml" when I try to upload my epub using the itunes producer. I know this is caused because the text within page1.xhtml is in Greek but I do not know how to solve it. I already added "<dc:language>el</dc:language>" at the .opf file and also "<META http-equiv="Content-Type" content="text/html" charset="UTF-8">" at head section of "page1.xhtml" but it still does not work. Any ideas anyone?

Well I found myself the reason of the error and corrected. The reason of this error message was the way the .xhtml file was saved. Ie the file, for some curious reason was saved as UTF-16 instead of UTF-8. To see your encoding open the file that has the problem with chrome browser and go to "tools" and then "encoding". If you see that the encoding is not UTF-8 then open your file with "notepad" and then go to "save as" and then save it as text with "UTF-8" encoding. This solved my problem.

ERROR ITMS-9000:"Redundant Binary Upload. There already exists a binary upload with build version '1.1' for ipa '1.1'".

Similar Messages

Maybe you are looking for