Error ref code: tuMfkgFG8GvC0T4olRZOeA

Hi!
We are getting this error code in Adobe forms questionnaire we created whenever a user hits the "Save" feature button
Unable to send form link
error ref code: tuMfkgFG8GvC0T4olRZOeA
Can someone please help?
The form is online and located here: http://systemise.com.au/web-design-questionnaire/
You can try and replicate.
Thank you!
Tony

Your form data has been saved.
Please click the button within 7 days to complete and submit your form:
Retrieve Form
or click on the link below:
http://systemise.com.au/web-design-questionnaire/#_%40%40rdd%3DjjPI0XSCKCDMvdp7549HEABwFDd Vr3DRbbeEuM7ZdMfXrMHbITayg40f2hjY8whWA
If you cannot access this link, copy and paste the entire URL into your browser.
Note: After 7 days your saved form will be discarded.
So I clicked the link then it will just pop on the screen and I cant do anything on the form!!!

Similar Messages

Table creation Error "Ref Count for this object is higher than 0"

Hi All
I have a problem in creation of table using SDK on a button event. I have a procedure to create tables and fields. If I call this procedure on a menu Event than it works fine but If I call this procedure on a button event than It gives error "Ref count for this object is higher than 0" . I know this error occur When an object does not release after creating a table. but this error occur at when first table is created. My code it given below. plz see and give me your valuable suggestions.
Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
            Try
                oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                oUserTablesMD.TableName = "AM_OBIN"
                oUserTablesMD.TableDescription = "PutAway Table"
                oUserTablesMD.TableType = BoUTBTableType.bott_Document
                lRetCode = oUserTablesMD.Add
                '// check for errors in the process
                If lRetCode <> 0 Then
                    B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
                    MsgBox(sErrMsg)
                Else
                    B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
                End If
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
                oUserTablesMD = Nothing
                GC.Collect()
                oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                oUserTablesMD.TableName = "AM_BIN1"
                oUserTablesMD.TableDescription = "PutAway Upper Grid"
                oUserTablesMD.TableType = BoUTBTableType.bott_DocumentLines
                lRetCode = oUserTablesMD.Add
                '// check for errors in the process
                If lRetCode <> 0 Then
                    If lRetCode = -1 Then
                    Else
                        B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
                        MsgBox(sErrMsg)
                    End If
                Else
                    B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
                End If
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
                oUserTablesMD = Nothing
                GC.Collect()
            Catch ex As Exception
                MsgBox(ex.Message)
            End Try
Thanks
Regards
Gorge

Hi Gorge,
The "Ref count error..." usually occurs in case of Meta Data objects not being properly cleared. And yes, you have got the error in the right place, generally while creating tables / fields / UDOs. For this, you just need to clear the Meta Data object (At times even DI objects like Record Set) once they are used.
Eg: Release these objects in the below way in a Finally Block.
System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
Hope this helps.
Regards,
Satish

INSTALLATION ERROR: Exit Code: 6

When installing PS CS6 on PC with Windows 7 Ultimate Svc Pack1, 18 GB RAM, Intel i7CPU, received INSTALLATION ERROR: Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF012, DW050 ... WARNING: DF029, DF054 ...
------------- Summary ------
- 0 fatal error(s), 3 error(s), 2 warning(s)
----- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 ------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
---- Payload: {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 -----------
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\****\Downloads\CS6
Photoshop_13_LS16\Adobe CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe",
>>>>>>Did that. Ran AV and registry clean software then re-ran vcredist_x64.exe with NO antiviral software running (repeated in safe boot and clean boot) and got through the install, with this message:
..........Microsoft Visual C++ 2008 Redistributable Setup...................
Error 1935.An error ocurred during the installation of assembly
'Microsoft.VC90.ATL,version="9.0.30729.4148",publicKeyToken="1fc8b3b9a1e18e3b",processorAr chitecture="amd64",type="win32". Please refer to Help and Support for more information. HRESULT: 0x80070422...........
or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: {DE7C6FA1-AF75-48A8-B495-CFAD529BCC3D} Recommended Common Fonts Installation 2.0.0.0 -----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\NuevaStd-BoldCond.otf'(Seq 58)
ERROR: DF012: Unable to find file(Seq 58)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed
+++++++++++++++++++++++
PS32bit opens/works just fine.
PS64bit opens with error message (need to cancel them 6-22 times) Runtime error R6034 but otherwise seems to run normally.
From Microsoft, downloaded file vcredist_x64.exe and ran it. Got error message that there was no free space on my CD drive...Really?!
Any other ideas?
Thanks, Joan

Please start with running the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/ to automatically review your installation logs and attempt to locate a solution.
Alternately you can follow the steps listed at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html to manually review your installation log.

Download error Exit Code: 6 -deleted file msvcr110.dll

I have Photoshop CS4. I joined the Cloud today. When I went to download Photoshop CV it gave me these errors:
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s)
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\gyork\AppData\Local\Temp\{A1DCE3E8-850D-4131-836A-E00EFCFCE3B0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.325 {55B82130-18F9-11E2-8D43-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\gyork\AppData\Local\Temp\{A1DCE3E8-850D-4131-836A-E00EFCFCE3B0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: -2147023293
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\gyork\AppData\Local\Temp\{A1DCE3E8-850D-4131-836A-E00EFCFCE3B0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147023293
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\gyork\AppData\Local\Temp\{A1DCE3E8-850D-4131-836A-E00EFCFCE3B0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
When I tried to do the first thing it said to do, it deleted the msvcr110.dll file.
Photoshop CV won't open without it.
So of course, I don't want to do anything else it says to do.
I have gone online and tried everything I see to get it back and nothing works. I tried downloading it from Microsoft, but it won't run.
I tried reinstalling CS4 and that didn't work. So I uninstalled CS4 and tried to reinstall it, but now it won't install.
It goes through the whole process then says to call Adobe.
When I try to install Illustrator (which I didn't have before, but bought the complete special offer) it has similar errors.
Any ideas?
Thanks

Hi jessmom3,
You may also refer to the help document:
Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Regards,
Sheena

How to consume web service in WDP ABAP ---HTTP error (return code 404, mess

Hi,
Am trying to consume a web serivce in WDP where I got error HTTP error (return code 404, message "conn failed")in sdn i came to know that it could be resloved by giving the IP address of the host but in case it is not the web services am using are the external links.
kindly help me to sort it.
Regards
Raj

hi,
in addition to above thread
refer this too
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0d4aa08-beed-2a10-fab2-ad975cead04a
bvr

TFTP 'configuration update' from 5508 WLC fails stating reason as '%Error: Config file transfer failed – Unknown error –refer to log'

Dear Experts,
I have two WLCs and other management devices as part of same subnet. I am able to upload ‘configs’ from all the devices on to my TFTP server. However when I am attempting to do the same from one of my WLC, it is failing consistently stating error message as:
‘%Error: Config file transfer failed – Unknown error –refer to log
Has anyone else too faced the same issue and how would we overcome this? Any specific debug that could help get more details on it?
Though the error message says, refer to log but still I don’t see anything that gets reflected in ‘Monitor logs’ which is related to ‘configuration file’ upload failure.
WLC code: 7.4.100.0
PFA as the error snippet.
Thanks and Regards,
Adnan

Hi Kaneswaran,
Just a soft reboot helped me solved the problem :). Still I am on 7.4 and facing no issues after this.
Apologies for coming too late to respond. Getting a down time window was not that easy and so was much delayed to try soft reload. I am still on 7.4 and facing no issue.
Glad that in your case it starting working all of a sudden. Could you please verify from 'show tech-support' to confirm if by chance your WLC had undergone any crash that could have caused the WLC to reload and thus accidently fixing the issue :)
Best Regards,
Muhammed Adnan

MUSE fails to install error; exit code 7. WIN 7 64 bit

I had a problem with MUSE and tried to remove and reinstall but when I tried to reinstall the software it tells me it has failed and gives me error; exit code 7. I tried to remove anything I could find and even tried the adobe cleanup tool. Finally I couldnt figure anything out and I removed all Adobe software but it still will not install. I am using windows 7 64 bit. ANY help would be apreciated, I need to get this back up and running.

Hi Reed,
Please try installing from here: http://helpx.adobe.com/muse/kb/installer-file-damaged.html.
Refer the article: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html in case of further issue.
Regards,
Romit Sinha

Error: Ref count for this object is higher then 0

Hello All,
I am trying to create User Defined Tables in SAP through Coding but while running the code the error "Ref count for this object is higher then 0 " is showing .
I have created a temporary table in which the Table Description are stored as follows :-
Create Table Test_Table (TblCode Varchar(30),TblName Varchar(100),TblType int)
From this table then using recordset i am getting the table details for creation :-
oRecord.DoQuery("Select TblCode,TblName,TblType From Csv_UDT")
            While Not oRecord.EoF
                Dim Table_Id As String = oRecord.Fields.Item("TblCode").Value
                Dim Table_Name As String = oRecord.Fields.Item("TblName").Value
                Dim Table_Type As integer = oRecord.Fields.Item("TblType").Value
                Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
                oUserTablesMD = Class_OprTbl_Main.ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                '// set the table parameters
                oUserTablesMD.TableName = Table_Id
                oUserTablesMD.TableDescription = Table_Name
                oUserTablesMD.TableType = Table_Type
                lRetCode = oUserTablesMD.Add
                If lRetCode <> 0 Then
                    If lRetCode = -1 Then
                    Else
                        Class_OprTbl_Main.ocompany.GetLastError(lRetCode, sErrMsg)
                        Class_OprTbl_Main.SBO_Application.MessageBox(sErrMsg + oUserTablesMD.TableName)
                    End If
                End If
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
                oUserTablesMD = Nothing
But while running this code the error is coming .
How to solve this error ........
Thanks,
Amit

First of all, you are not meant to create temporary table in SAP database. SAP have never made an official announcement, but I think they would not be too happy if they saw it and may withdraw support. Just something to be aware of.
Secondly, your error is very common and you would have found the solution by searching the forum. It is caused by having an open recordset while trying to use a metadata object.
You will have to change how your code works. You can not use the UserFieldsMD or UserTablesMD object while you have an undisposed recordset object.
-1120 - Ref count for this object is higher then 0
Ref count for this object is higher then 0
Error: Ref count for this object is higher then 0
Meaning of Error Msg: "Ref count for this object is higher than 0"
The solution is you must dispose of any recordset object before attempting to use the UserTablesMD object:
System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet)
oRecordSet= Nothing
GC.Collect()
GC.WaitForPendingFinalizers()

HTTP error (return code 400, message "ICM_HTTP_CONNECTION_FAILED")

Hello All,
I am trying to create a proxy class from a webservice through a URL.
I get the error:
HTTP error (return code 400, message "ICM_HTTP_CONNECTION_FAILED")
What could be the reason for this. Please help.
Thanks,
Smita

Hi Smita
Pls refer the links for this error ICM_HTTP_CONNECTION_FAILED
The specified item was not found.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/changing%252bhttp%252bport%252bof%252bdecentralized%252badapter%252bengine
Http* Errors in XI
Configuring & Publishing Enterprise Services from SAP Business Suite system into NWCE (Netweaver Composition Environment) Services Registry
Publishing ABAP WebServices to an External UDDI Server
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Regards
Abhishek

Error in code generation for deleting table BUT000_TD

Hi,
Did anyone encounter this error while working on EEWB ?
I created the project extension via EEWB and completed the wizard setting with the package (dev. class) value as $temp as I wanted to test it locally.
One of the errors, that I got is:
Error in code generation for deleting table BUT000_TD
    Message no. DA464
Diagnosis
    This error message indicates that internal inconsistencies exist.
Procedure
    Please consult SAP.

Hi,
As I mentioned in my previous post kindly check the consistency of the structure BUT000_TD.
Regards,
Sudheer.

"Error Result code = -43" AND "Audio file not found"

In Garageband I was trying to click Join, but kept getting "Error Result code = -43"
What does this mean?
Also, I thought saving the file and restarting Garageband would help, but upon re-opening the program BIG problem: the file (just this one, others are opening fine) has this error message upon opening "Audio file “07 I See the Light.aif” not found!"

mcgregorsgal wrote:
so do I have to basically start over?
for that one recording, it looks like it.
the error -43 is a system level error, so i HIGHLY doubt this will help, however you can ctrl-click the project file, choose Show Package Contents, open the media folder and preview any audio files in there to see if the missing file is there, but in all likelihood, you will need to re-record it

Error : COmpany code does not exist or has not been fully maintained

Hi ,
I tried creating a material with industry sector : mechanical , material type : raw material.
i selected basic data 1 and 2 view or MRP 1 view for views , i gave plant as SUJA and storage location value S001 ( plant and stor loc i have created in the company code 2001)
but i get this error COmpany code 2001 does not exist or has not been fully maintained..
I created COMPANY CODE using SPRO - Entreprise structure --definition - financial accounting --define , copy , check , delete company code..
kindly suggest me the solution for this error..

Hi,
Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
Please activate in T.code: OMSY,
[For example: For Fiscal year variant K4]
In OMSY steps, u have to enteru2026u2026u2026..
Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
Company Name..
Fiscal Year of Current Period 2009
Current period (posting period) 03( )
Fiscal year of previous period 2008( will come automatic)
Month of previous period 02( will come automatic)
Fiscal year of last period of previous year 2008
Last month of previous year 12
Allow Posting to Previous Period (Back posting)
Disallow back posting after a change of period
Now create material with T.code; MM01
Regards,
Biju K

Can you Ignore Error Response Code in HttpUrlConnection?

I have a problem with a HttpUrlConnection object throwing an IOException when it gets an HTTP Error Response code. Especially when there is an actual response from the server sent back that has more details in it that are actually helpful.
I would like to just tell the HttpUrlConnection ot ignore HTTP error responses and just pass along the page or data that was returned instead. I need to handle this myself.
The reason if it matters, is I am sending SOAP Envelopes, and if the Web Service doesn't like it, it will send an HTTP 500 Response Code, but it also sends a response SOAP Envelope that tells me exactly what is wrong.
Right now to get this response I have to use a Sniffer, or worse since it is HTTPS (ssl) i have to use the jvm's SSL debug mode, and pull the response out of the hex code.
I couldn't find anything about this, so I am afraid I am SOL, just hoping that there might be an obscure "feature" or "property" that can deal with this, that I can't find.
** 10 Duke Dollars to first person to provide a solution that works **

Just call the getErrorStream() method to read the error response. Eg.
HttpURLConnection conn = null;
try {
conn = (HttpURLConnection)
    new URL("http://www.google.com/givemea404").openConnection();
} catch (Exception e) {
InputStream in = conn.getErrorStream();
int i = in.read();
while (i != -1) {
    System.out.print((char) i);
    i = in.read();
}

Error- "Tax code B0 country IN does not exist in procedure TAXINN"

Hi to All,
I'm working on a Import PO. While doing MIRO for planned delivery cost, I'm getting an error "Tax code B0 country IN does not exist in procedure TAXINN"
I've assigned the Tax code to company code, but still I'm not able to solve this problem. Could anybody tell me the areas in which I may have made the mistake?
Thanks & Regards,
Piyush

Hi Piyush
You assign your tax code to company code at IMG--> Logis General --> Tax on Goods Movemnt --> Basic Settings --> Calculation of excise duty -> Condition type excise determination --> Maintain Tax code to country code
If still problem is not resolved you maintain the all rates to 0 in FTXP of this Tax code.
Regard
Vivek
-- Reward if helpful !!

"ink system failure" error with code oxc19e0023 on a HP Photosmart Premium All-in-One Printer - C309

"ink system failure" error with code oxc19e0023 on have a HP Photosmart Premium All-in-One Printer - C309g - Have done all the resets and reseated the ink also tried replacing ink with new HP carts..getting frustrated please help
This question was solved.
View Solution.

Have you tried the steps outlined in this article:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
If not give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error ref code: tuMfkgFG8GvC0T4olRZOeA

Similar Messages

Maybe you are looking for