Error while connecting in Visual Administrator

Hi all,
when I connecting in the Visual Admin, the following message occurs:
<i>"Error while connecting
java.lang.ArrayIndexOutOfBoundsException: 40".</i>
The percent bar is in 3%.
Whats happening?
Thanks,
Yuri
My environment:
EP6.0 SP19
j2sdk 1_4_2_12
Ms Windows 2003

Hi Yuri,
chk out this link
/message/2924638#2924638 [original link is broken]
Reward points if useful
Thanks
Srinivas

Similar Messages

Error while connecting to Visual administrator - Server0 getting Restarted

Hi Experts,
Kindly help me to Tune the JVM Parameters For AS Java ( Enterprise Portal 7)
We are Having our Development Portal on a 32-bit Machine and recently we have migrated the same to a 64-Bit with SAP OS/DB. We are Using IBM DB2 9.1 Fix pack 2.
Now I have to Configure the Java Virtual machine (JVM) Parameters for the EP instance in the 64-bit Hardware. The Hardware details are as Follows :
Ram - 10 GB
Paging Memory - 25 GB
OS - Win 2k3 - SP2
HDD - 500 GB
Current JVM Parameters : For (Server0)
-XX:MaxPermSize=256M
-XX:PermSize=256M
-Xms2048M
-Xmx2048M
-XX:NewSize=171M
-XX:MaxNewSize=171M
Now when iam connecting to Visual Administrator (VA) with administrator it is connecting upto 20 % - 25 % and giving a error - (Ping Timeout - connection to server Lost) and the Server0 is Restarting.
i have modified Xmx and Xmx to 3072 and restarted the J2ee Engine. And now for some time it is ok and again giving the same error.
And modifying the Server0 JVM parameters is sufficient or we have to modify Instance --> Servers General JVM Parameters Too ?**
i Believe this is the problem with JVM Parameters. Correct me if iam wrong
Please Help me to solve this Issue
Thank in Advance
P.S.V Santosh Chaitanya
SAP Basis Consultant
Mobile - +91-9901121909

Hi Santosh,
The some Memory parameter you set is not correct
-XX:MaxPermSize=256M
-XX:PermSize=256M
-Xms2048M
-Xmx2048M
-XX:NewSize=171M
-XX:MaxNewSize=171M
it should be as below
-XX:MaxPermSize=512M
-XX:PermSize=512M
-Xms2048M
-Xmx2048M
-XX:NewSize=320M
-XX:MaxNewSize=320M
pls check the note suggest earlier.
Thanks
Anil

Error when connecting to Visual Administrator

Hi Experts,
Im getting this error when trying to connect to visual administrator...
Im basis, and already ask to the IT team to open the port 50004 so the Visual administrator can connect. Their answer was that the port is open waiting for a tool to ask to connect to it. I´ve been looking for info in regards this issue unsuccessfully, can't find anything. Any ideas????
Thanks in advance...

Hi,
Administrator user may be locked you can unlock and then try to connect Visual Administrator and please read below link
Visual Administrator: Logon Failure (SAP Library - SAP NetWeaver? Problem Analysis Guide (PAG))
Thanks
Brahma.

Error in connecting to Visual Administrator

All of a sudden when I want to connect to the visual admin on my productive EP6 (/usr/sap/<SID>/JC<NR>/j2ee/admin/./go) after when I give my password an click on connect it does a little % connecting to database and than gives me the error:
! Error while connecting
When I click on the right sided ! it comes with the task error message:
Error while connecting
java.lang.NullPointerException
Nothing had been changed and in the night it worked but in the morning I got called by another engineer that he wasn't able to connect to the VA to do some changes SAP had given them to change.
Hope anyone had had this same strange issue and has a solution on it

It seemed that the logging of from the VA wasn't done correctly during some time (probably the did not first do a logout and than an exit, but exited right away)
After a stop and start of the portal I was able to login again without the error.

Getting error while connecting Utility Customer E-Services

I am getting the following error while connecting to Utility Customer E-Services through the browser.
Error: Your user master has not been created correctly. Contact your system administrator.
Please advise some fix for this problem.
Thanks in advance.
Regards,
Nitin

Hi Mattia,
yes, I had resolved this problem. It requires some configuration in ume database of the WebAS, where UCES application is hosted.
1) Create a user in ume.
2) Assign group "Everyone" and "Authenticated Users" to the user
3) Within Customized Information tab, create the mapping between your web user, reference user and business partner.
fscm_refuser: Use reference user id. ( user id to login to ISU system )
objtype_0: BUS1006
objkey_0: User business partner details ( business partner number in ISU)
If there is no customized Information tab, then open visual administrator and do the following.
1) Navigate to Services->Configuration Adapter
2) Click on Runtime tab -> Display configuration
3) Navigate to cluster_data -> server -> cfg -> services -> Propertysheet com.sap.security.core.ume.service
4) Add the following in ume.admin.addattrs.
com.sap.security.core.user.refuser:fscm_refuser;com.sap.security.core.user.references:objtype_0;com.sap.security.core.user.references:objkey_0;com.sap.security.core.user.references:objtype_1;com.sap.security.core.user.references:objkey_1;com.sap.security.core.user.references:objtype_2;com.sap.security.core.user.references:objkey_2;com.sap.security.core.user.references:objtype_3;com.sap.security.core.user.references:objkey_3;com.sap.security.core.user.references:objtype_4;com.sap.security.core.user.references:objkey_4;com.sap.security.core.user.references:objtype_5;com.sap.security.core.user.references:objkey_5;com.sap.security.core.user.references:objtype_6;com.sap.security.core.user.references:objkey_6;com.sap.security.core.user.references:objtype_7;com.sap.security.core.user.references:objkey_7;com.sap.security.core.user.references:objtype_8;com.sap.security.core.user.references:objkey_8;com.sap.security.core.user.references:objtype_9;com.sap.security.core.user.references:objkey_9;com.sap.security.core.useces:objtype_10;com.sap.security.core.user.references:objkey_10;com.sap.security.core.user.references:objtype_11;com.sap.security.core.user.references:objkey_11;com.sap.security.core.user.references:objtype_12;com.sap.security.core.user.references:objkey_12;com.sap.security.core.user.references:objtype_13;com.sap.security.core.user.references:objkey_13;com.sap.security.core.user.references:objtype_14;com.sap.security.core.user.references:objkey_14;com.sap.security.core.user.references:objtype_15;com.sap.security.core.user.references:objkey_15;com.sap.security.core.user.references:objtype_16;com.sap.security.core.user.references:objkey_16;com.sap.security.core.user.references:objtype_17;com.sap.security.core.user.references:objkey_17;com.sap.security.core.user.references:objtype_18;com.sap.security.core.user.references:objkey_18;com.sap.security.core.user.references:objtype_19;com.sap.security.core.user.references:objkey_19;
5) Save the changes, exit visual administrator and restart the server.
Now. your application will work perfectly fine.

Procblem Connection with visual administrator

hai,
I want to connect with visual administrator , i created new connection with my localhost and portnumber 50000
but its giving error
Error while connecting
Cannot open connection on host: localhost and port: 50000
How can i solve this problem

I think when you using visual admin to connect the server
you should use the port 50004

Error while connecting to informatica repository server

Hi,
I am trying to connect to Informatica Repository Server, and getting following error:
Failure connecting to "INFORMATICA_REP_Logical"!
ANOMALY INFO::: Error while connecting to informatica repository server
MESSAGE:::
pmrep Connect Error
=====================================
STD OUTPUT
=====================================
Informatica(r) PMREP, version [8.6.1 HotFix6], build [319.0622], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2009
All Rights Reserved.
This Software may be protected by U.S. Patent Numbers 6,208,990; 6,044,374; 6,014,670; 6,032,158; 5,794,246; 6,339,775; 6,850,947; 6,895,471; 7,254,590 and other U.S. Patents Pending.
Invoked at Sat Apr 03 15:57:50 2010
[PCSF_10342] [PCSF_10342] Exception occurred: [[AUTHEN_10004] The Service Manager failed to authenticate user [Administrator] in the security domain [Native]. The specified user name or password is invalid.]. [FAULT_PCSFUSEREXCEPTION]
[04/03/2010 15:57:50-[REP_12164] Domain-related error: [[DOM_10033] [DOM_10033] Service [Oracle_BI_DW_Base.rep] does not exist in domain [Domain_localhost]. [FAULT_PCSFCONFIGEXCEPTION]].]
[Failed to connect to repository service [Oracle_BI_DW_Base.rep].]
An error occurred while accessing the repository[Failed to connect to repository service [Oracle_BI_DW_Base.rep].]
[04/03/2010 15:57:50-[REP_55102] Failed to connect to repository service [Oracle_BI_DW_Base.rep].]
Repository connection failed.
Failed to execute connect.
Completed at Sat Apr 03 15:57:50 2010
=====================================
ERROR OUTPUT
=====================================
EXCEPTION CLASS::: com.siebel.analytics.etl.infa.interaction.PmrepConnectException
com.siebel.analytics.etl.infa.interaction.PmrepInvoker.pmrep(PmrepInvoker.java:102)
com.siebel.etl.gui.data.StaticDatabaseCalls.testRepositoryServer(StaticDatabaseCalls.java:959)
com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:890)
com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:275)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:433)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:224)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:144)
Kindly help.
Regards,
Jitendra

I am facing the same issue.
I am connecting from DAC, any suggestions what should have gone wrong here

Error while Loggin inot VISUAL ADMIN-No login module succeeded.

Hi,
I am trying to login to the Visual Admin for the first time for my new Portal System (Quality).
But I am getting error while loggin in with Administrator user:-
com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.
The visual_administration.0.trc file shows the following:-
1.5 #C000AC117C1900010000000159CB59CB000455D3152A8478#1220264988408#com.sap.engine.services.adminadapter.gui.tasks.LoginTask##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-15,6,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Java###Error while trying to login to SBQEP: No login module succeeded.
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.
     at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:188)
     at java.security.AccessController.doPrivileged(AccessController.java:231)
     at com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:181)
     at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImpl.login(RemoteLoginContextHelperImpl.java:72)
     at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImplp4_Skel.dispatch(RemoteLoginContextHelperImplp4_Skel.java:64)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
predecessor system -
com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.
     at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:188)
     at java.security.AccessController.doPrivileged(AccessController.java:231)
     at com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:181)
     at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImpl.login(RemoteLoginContextHelperImpl.java:72)
     at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImplp4_Skel.dispatch(RemoteLoginContextHelperImplp4_Skel.java:64)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Have reffered SAP Note 957355 and performed the steps given in the note,but still the same error.
I am able to login to the PORTAL with the same Administrator user and password.
Pls suggest where could be the issue and how to process.
Regards,
Abhijeet

Problem solved. ... No, I have also an answer , perhaps it can help some other peoples.
As I said there is a note 957355. I create the entrys in offlineconfigtool, but nothing happens. So I checked the other entrys in the "configuration" node in "security" (the note 957355 treated the authentication entry)    , like "UME User Store" "ticket" and so on. I've taking another system and ckecked this entrys and compare it with my system. So I could restore the default entrys in all security nodes (for authentication). After an restart - voila, it workes.
greetings
ps.: hm, can I give some points for me?

Infrequent Error while connection application from Workspace

In HFM Workspace (9.3.1) some users are getting the following error while connecting to application. The error is infrequent.
" Please make sure that the Application you are trying to launch is registered with SharedSerivces. SharedServices must be running for the feature you are trying to access. Close the browser window and try logging into workspace again after a little while. Contact your administrator for further information.'
Shared service is running fine and the users are able to connect to application after they close the browser and try again. Has any one experienced this?

You might want to try applying HSS 9.3.1 Service fix 12
this addressed the following two issues.
7595698 – “Registered app is not active …” error. Active Financial Management application is sometimes listed as inactive.
7586480 –Inactive Planning applications. After about 30 minutes, Planning applications in User Management Console are listed in inactive status.

Getting an Error while installing Microsoft Visual Studio 2013

Hi team
I am getting an error while installing Microsoft Visual Studio 2013
PFB error : this version of visual studio requires a computer with a never version of windows
P.S. I am having Windows 7 64 bit processor , van you please advise ASAP

Hi Kanchan Gandhi,
A similar issue is addressed here, hope it’s helpful.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/127869c4-7e00-450d-b7fc-1b3cd11ebf07/this-version-of-visual-studio-requires-a-computer-with-a-newer-version-of-windows?forum=vssetup
This is system requirement of Visual Studio 2013:
http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
If there is anything I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error while connecting to workflow builder after installation...first time!

Hi,
I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
220: Unable to set NLS_LANGUAGE.
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
In the previous threads when I searched for the same issue, I found that if
select value from v$nls_parameters
where parameter='NLS_CHARACTERSET';
returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
Please help me. I tried a lot. Any type of help will be highly appreciated.
Thanks,
Sumir

This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini

Installing Java Dialog Instance - Error while connecting to DB

We would like to add a dialog instance to our production Portal server. We installed Portal as stand-alone on the central instance. We have another server we would like to setup to serve as a Portal dialog instance.
So far I have installed Windows 2003 Server Standard. Installed MSSQL server client tools (database is mssql server). Installed jdk 1.4.62. Set java home and path environmental variables. I'm now installing the Java dialog instance (I can't find any documentation on this). From Netweaver installation CD> SAP NetWeaver '04 Support Release 1> Java System> MS SQL Server> Dialog Instance Installation>
SAP System ID: (sid) ES2
Central Host: SAPEPS02
Path to JAVA DVD supplied> JDK Directory confirmed> Domain paramaters confirmed> domain<sid> account passwords supplied> domain<service><sid> account password supplied> Instance number confirmed>
Installation started> It gets to step 8 and fails stating "Error while connecting to DB". I looked through all the log files and couldn't come up with anything (i'm very thorough).
I tried adding the users to the database as dbowners (no luck). I installed SQL server 2000 with SP4. No where during this installation did I get prompted for database parameters?
Is there something basic i'm missing? Does this scenario not work? Any help would be greatly appreciated. Pointing me in the right direction of the correct documentation would also be appreciated. Thank you in advance.
Sincerely,
Brad Dridi

Hi Brad,
I am facing the same problem. I hope by now you must have got the solution for this.
Can you please let me know how did you overcome this situation?
Thank you!!
Regards,
Abhijeet Bhagat

JCONTROL - dies with Error while connecting to DB

Hi....Experts
DB : Oracle 10.2.0.4.0
OS ; AIX 5.3
NW : 7.0 SP22
UT : EP
Yesterday the above server got rebooted by a power failure. after that
The server's DB is coming up as ora<sid> user, listener is also up
But as <sid>adm user - when i am starting . The jcotnrol dies and in thee work directory
....log_bootstrap_ID1168012.0.log fiel shows the below messages in the tail end,
================================================================
ERROR-1 : OBSERVED
================================================================
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:365)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:130)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
     at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
     at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:74)
     at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:473)
     at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
     at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
     at java.lang.reflect.Method.invoke(Method.java:391)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:307)
     ... 15 more
[Feb 10, 2012 4:46:28 PM ] [Bootstrap module]> Problem occurred while performing synchronization.
================================================================
ERROR-2 : OBSERVED
================================================================
also i see error in work directory ...sapcpe.log as below
Host:d45adm> more sapcpe.log
2012/02/10 19:01:45
sapcpe version UC: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#20 $ SAP
Command line:
0: /usr/sap/D45/SYS/exe/run/sapcpe
1: name=D45
Trace level (profile): 1
INFO:    Try to find file table sapcpeft (default:sapcpeft)
INFO:    Try to find file table in the central directory /usr/sap/D45/SYS/exe/ctrun/sapcpeft
INFO:    not found any file table.
source: /usr/sap/D45/SYS/exe/ctrun
target: /usr/sap/D45/SYS/exe/run
ERROR: sapcpe: find <src> /usr/sap/D45/SYS/exe/ctrun failed, 2, No such file or directory, [sapxxcpe.c:1464]
sapcpe.log: END
================================================================
any thoughts & advises, clues ???
Rgds
PR

ISSUE - RESOLVED
####Summary######################################
Key Word of this Issue :
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
Reason
Name resolution by conflict / failure by netsvc.conf even we have hostfile & ping works with host name for Every user.
Solution
Adjusted netsvc.conf file to use the hostfile.
DETAILS OF RESOLUTION
OSS Experts asked me to copy the results
SAP Note No. 867176: FAQ: Oracle JDBC (JdbcCheckup) - Point 10
01. I copied JdbcCheckup.sar to location /home/sidadm/867176-jdbchkup/
02. Extracted the same in same foler with command : SAPCAR -xvf JdbcCheckup.sar
03. Now folder contained 2 files ""JdbcCheckup.java"" and "" JdbcCheckup.sar""
04. my JDBC driver file ojdbc14.jar is in location /oracle/client/10x_64/instantclient/
05. To determine the JDBC driver version issued the below command as per note
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
Exception in thread "main" java.sql.SQLException: Io exception: There is no process to read data written to a pipe.
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
        at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
        at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
        at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
        at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
        at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
        at java.sql.DriverManager.getConnection(DriverManager.java:559)
        at java.sql.DriverManager.getConnection(DriverManager.java:189)
        at JdbcCheckup.main(JdbcCheckup.java:128)
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
06. Immediately id did google with above Syntax of error.
"""java.sql.SQLException: Io exception: There is no process to read data
written to a pipe"""
https://forums.oracle.com/forums/thread.jspa?threadID=1320173
which was referring about netsvc.conf
With UNIX Team discussions, adjusted the host file as first name
resolution source and DNS servers list followed in same(netsvc.conf) file. which
fixed the issue and "JdbcCheckup" passed.
07. JdbcCheckup Command - Passed output.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Command : java -classpath /oracle/client/10x_64/instantclient/ojdbc14.jar:. JdbcCheckup
Please enter information to test connection to the database
user: SAPSR3DB
password: PASSWORD
database(a TNSNAME entry): SID
Hostname: portalserver
Port (1521): 1527
Connecting to the database...Connecting...
jdbc:oracle:thin:@portalserver:1527:SID, SAPSR3DB, PASSWORD
connected.
=============
Database Product Name is ... Oracle
Database Product Version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
=============
JDBC Driver Name is ........ Oracle JDBC driver
JDBC Driver Version is ..... 10.2.0.4.0
=============
Hello World
Your JDBC installation is correct.
portalserver:sidadm>
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BIG THANK TO EVERYONE !!!!!!!!!!!!!!!!
REGARDS
PR

Error while connecting to db

Hi,
We are getting the error while connecting the database.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
IBM AIX RISC System/6000 Error: 2: No such file or directory
Error persists only for second or two & again connection comes back.
NOTE-- When this happens only new connection recives the error while existing connection work properly.
On metalink the error description is.
Cause: Unable to locate shared memory realm
Action: Verify that the realm is accessible
also I have checked
SQL> select resource_name,current_utilization,max_utilization,limit_value from v$resource_limit;
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION LIMIT_VALU
processes 1044 1091 1100
sessions 1052 1097 1400
enqueue_locks 208 437 17404
enqueue_resources 248 335 UNLIMITED
ges_procs 0 0 0
Kindly advice urgent.

IBM AIX 5L
10.2.0.3
Client OS is Windows XP & oracle client using is oracle 8 & 9i client.
TNS Entery of client
AIX.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1521))
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1526))
(CONNECT_DATA =
(SID = ORCL)
There is only one oracle home on the client mechine
entries in sql* net are
names.directory_path = (TNSNAMES)
names.default_domain = world
name.default_zone = world
names.default_domain=world
erro in the listener log is
18-MAY-2009 16:42:25 * (CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=UdyogGrid.Exe)(HOST=Windows NT PC)(USER=vmittal))) * (ADDRESS=(PROTOCOL=tcp)(HOST=221.135.27.180)(PORT=2021)) * establish * ORCL * 0
18-MAY-2009 16:42:33 * ping * 0
WARNING: Subscription for node down event still pending.
NOTE-- Problem started from the day we have set the password for the listener.
Kindly advice.
Edited by: Sachin A on May 18, 2009 10:08 PM

Deserialization Error while connecting to web service

I am getting a deserialization error while connecting to a web service.
Deserializing parameter 'ScheduleReceiveService': could not find deserializer for type {http://www.w3.org/2001/XMLSchema}anyType...
There are two methods ex
UserDefinedClass1 methodA(java.lang.Object ) and
UserDefinedClass2 methodB(UserDefinedClass3)
And when i generate java files using WSDL2Java using apache axis the UserDefinedClass is generated as follows.
public class UserDefinedClassA implements java.io.Serializable {
private java.lang.Object _return;
// There are other methods for setting the attributes,hashCode,equals etc
Now when i try to invoke the method from the client i get this as an error ?
Deserializing parameter 'UserDefinedClass': could not find deserializer for type {http://www.w3.org/2001/XMLSchema}anyType
Appreciate any suggestion.

Hi Manohara,
To download the file from SharePoint, I recommend to use the credential for a user who can access the file in SharePoint in the client object model.
NetworkCredential credentials = new NetworkCredential(“username”, “pwd”, “domain”);
ClientContext context = new ClientContext(“http://thesitecollection”);
context.Credentials = credentials;
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while connecting in Visual Administrator

Similar Messages

Maybe you are looking for