Error while creating a report that uses Oracle OCI JDBC connectivity

Please let me know why my CR and LF characters are removed from my forum posting *****
Hi,
I was trying to create a report that uses Oracle OCI JDBC connectivity. I am using Eclipse3.4 download from "cr4e-all-in-one-win_2.0.2.zip". I have successfully created a JDBC OCI connection.
The connection parameters are given below:
URL: jdbc:oracle:oci8:@xe
Database: xe
username: <userName>
password: <password>
I have tested the above connection in Data source Explorer and it works fine!!!
But I am getting the following error when I drag-and-drop a table from the list of tables. Not sure what I am missing here? Any help is highly appreciated.
com.businessobjects.reports.jdbinterface.common.DBException: InvalidURLOrClassName
     at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCConnection.Open(Unknown Source)
     at com.crystaldecisions.reports.queryengine.JDBConnectionWrapper.Open(SourceFile:123)
     at com.crystaldecisions.reports.queryengine.Connection.br(SourceFile:1771)
     at com.crystaldecisions.reports.queryengine.Connection.bs(SourceFile:491)
     at com.crystaldecisions.reports.queryengine.Connection.t1(SourceFile:2979)
     at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2408)
     at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
     at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
     at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
     at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:657)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:163)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:525)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:523)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(ExecutorWithIdleProcessing.java:182)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(PriorityTask.java:75)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(PriorityCompoundCancellableRunnable.java:187)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(PriorityProgressAwareRunnable.java:90)
     at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(PriorityCompoundCancellableRunnable.java:144)
     at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
     at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$IdleTask.run(ExecutorWithIdleProcessing.java:320)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks
Karthik
Edited by: KARTHIK1 on Oct 14, 2009 9:38 PM

Hi Ted,
Thanks for the feedback. I was able to create a report in Creystal Reports Designer 2008 using OCI. It is not allowing only in the Eclipse plugin. In our environment we are not allowed to user Oracle thin connections and ONLY OCI is allowed.
1) Can you please let me know if there is a way to do this?
2) Will it allow data sources using native database driver?
3) If so, can I use JRC to create these reports from a desktop java program?
Thanks & Regards
Karthik
Edited by: KARTHIK1 on Oct 15, 2009 4:38 PM

Similar Messages

Error while creating physical standby database using Oracle Grid 10.2.0.5

Hi All,
I am setting up data guard using oracle grid.
Primary database version: - 10.2.0.4
Standby database version: - 10.2.0.4
Primary OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
Standby OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
I am creating physical standby database using EM. But it is getting failed with error message in sqlnet.ora file
Fatal NI connect error 12533, connecting to:
(DESCRIPTION=(ADDRESS_LIST=)(CONNECT_DATA=(SERVICE_NAME=INPRDSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=indb50.oii.com)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 10.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 17-AUG-2010 02:40:07
Tracing not turned on.
Tns error struct:
    ns main err code: 12533
    TNS-12533: TNS:illegal ADDRESS parameters
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0As we can see, address_list is empty.
Can anyone suggest what could be the reason behind this?

Dear user13295317,
Here is the error explanation;
Oracle Error :: TNS-12533
TNS:illegal ADDRESS parameters
Cause
An illegal set of protocol adapter parameters was specified.
In some cases, this error is returned when a connection cannot be made to the protocol transport.
Action
Verify that the destination can be reached using the specified protocol.
Check the parameters within the ADDRESS section of TNSNAMES.ORA.
Legal ADDRESS parameter formats may be found in the Oracle operating system specific documentation for your platform.
Protocols that resolve names at the transport layer (such as DECnet object names) are vulnerable to this error if not properly configured or names are misspelled.Hope That Helps.
Ogan

Error while running Webi report that uses Custom Dimension object(SAP BW)

Hi,
I have a universe that is based on SAP BW.I have created a custom dimension object that displays the maximum date.
The object syntax is
<expression>Max(@Select(CPS Online\Calendar day))</expression>
The object parses successfully.
The object 'Calendar Day ' is a defaultobject created during universe creation from the BW query.It is defined as [0CALDAY].[LEVEL01]
I tried to create a Webi report using this object and a measure .On running the query it throws the following error:
A database error occured. The database error text is: The MDX query WITH MEMBER [Measures].[EBC10672-C0DA-4998-93,80,D3,FF,C3,E8,A2,22] AS ' Max{[0CALDAY].[LEVEL01]} ' SELECT { [Measures].[EBC10672-C0DA-4998-93,80,D3,FF,C3,E8,A2,22], [Measures].[4JCOSFOKKCUR3RMBPNROFKQQD] } ON COLUMNS , NON EMPTY [0CALDAY].[LEVEL01].MEMBERS DIMENSION PROPERTIES [0CALDAY].[20CALDAY] ON ROWS FROM [ZCCPSONL/ZCPSONLINE] failed to execute with the error Invalid MDX command with (. (WIS 10901)
I have tried every possible syntax I could think of but I keep getting this error each time.I have set the object type to Number (even though it is actually a Date), I have tried writing the MDX inside the Max instead of the @select , but nothing seems to work.Could anyone please let me know why this error is occuring?Is there anything wrong with the syntax or is there any setting in Webi needed before a custom dimension object can be used on it.

Can you see data for Custom object @ BEx level??
YES, then just try to re-create the same variable and Save the BW query.
Now do View - refresh Strusture @ Universe. And you can see Filter for the same, just Parse it, just whether it is OK or not.
OK -- then Export the Universe and create WebI reports, this will come as Prompt.
Hope it will helps you.
Thank You!!
Sent from iPhone

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

XML Parser Error while creating Web service Client using JAX RPC

hello evryone,
Im facing XML Parser Error while creating web service client using JAX RPC. Im using Net Beans IDE for development purpose. I have wrote configuration file for client. Now i want to create Client stub. However i dont know how to do this in Net Beans. So i tried to do it from Command promt using command :
wscompile -gen:client -d build -classpath build config-wsdl.xml
here im getting Error:
error parsing configuration file: XML parsing error: com.sun.xml.rpc.sp.ParseException:10: XML declaration may only begin entities
Please help me out.
Many thanks in advance,
Kacee

Can i use the client generated using jdeveloper 11g to import into the oracle forms 10g, i.e., form builder 10g. Currently this is the version we have in our office.

Error while creating a report in BI publisher

Hi all ,
I am getting an error while creating a new report in BI publisher .
the error shown in console is --
java.lang.SecurityException: /
In the front end - i am getting
Operation failed: d:/OracleBI/xmlp/XMLP/Users/~administrator/annapurna/test/test.xdo
please suggest if anyone knows.

Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

Error while creating an outbound idoc using idoc type delvry02

hi,
i getting the following error while creating an outbound idoc(outbound shipping notification) using message type " DESADV" and IDOC TYPE " DELVRY02"
ERROR:
" SPECIFY EITHER ADDRESS NO OR ADDRESS HANDLE"
MESSAGE NO: AM053
Help would be appreciated.
regards
leo

The message is kind of self-explanatory. It seems that some address (delivery address ?) is required but is missing from the IDoc. If it's a syntax error, then the segment with error will appear in red in WE05 transaction.
It is also possible that you have filled some field that you should have left blank and now SAP is trying to find an address based on that field.
Check your IDoc contents. It's really hard to tell from the distance since the requirements and configuration could be very different in different systems. Sometimes the OSS note search by message ID and number is also helpful.

Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation

I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
"Document" content type for this library.
Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
request failed with HTTP status
401: Unauthorized.".
Can anybody tell me why I am getting this error?
Note: I have created the site and the library using SharePoint Admin account.

Hi,
Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
SharePoint farm. Add the report server to the
SharePoint farm and see how it works.
To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
or technology instance.
More information, see
http://msdn.microsoft.com/en-us/library/bb283190.aspx
Thanks.
Tracy Cai
TechNet Community Support

How to resolve the start at work indication while creating a report templateby using CG42?

Dear Experts,
I am working as a EHS Consultant , i am doing a assignment for power industry,
Querry 1.
While i am creating a report template by using CG42, when am trying to specify the initial status as in work, or release, system is not taking that, its automatically shows start at work. option,
while i am creating report template i used below steps.
CG2B-generation varient(Initial satus i had put it as relleased)
CG42- Edit or create report template.
I request yo u guide me how to trouble shoot this.
Querry 2.
And once i click the document option its given a information that
A report template is already being edited or displayed at front end.
I request yo u guide me how to trouble shoot this.
Thanks with regards
Vishwanath Hegde

Dear Viswa
For Query :2
Go to Utilities and click on "Rest front end" (refer below screen shot)
For Query :1
1) .Once you create the template the initial status will be "Star of work" and you should assign that template to respective Generation variant in CG2b.
2) Once you go in to report template through Cg42 , if you get above error , go to utilities click on " Rest front end" and edit the template and save the template without any errors , so automatically system status will be changed in to " In process on work station"
3) Once you finish the template creation with out any errors , you can click on Release , then the template status will be released.
Balajee

ERROR WHILE CREATING A DATABASE LINK USING HETEROGENEOUS SERVICES

I'm creating a database link with the Oracle Dataware Builder, and i get the following error:
Probando...
Fallo.
SQL Exception
Error del repositorio: Excepción SQL.
Nombre de la Clase: CacheMediator.
Nombre del Método: getDDEntryFromDB.
Mensaje de Error del Repositorio: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Informix][Informix ODBC Driver][Informix]Incorrect password or user [email protected] is not known on the database server. (SQL State: 28000; SQL Code: -951)
ORA-02063: preceding 2 lines from PRUEBA_SEH
As you can see i'm using heterogeneus services to connect to a informix database. ALTIADM is a valid user for that database, i don't send my ip address 192.168.0.62, but the error says "[email protected] is not known in the database server". how can i solve it?????

Right places to ask this question are
Heterogeneous Connectivity
Warehouse Builder

Error while creating Cross-reference table using Xreftool (PIP Ins)

Error while running xref.sh script unable to create cross reference table.
**Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool**
Could not find xref directory within tip folder (/OracleAS_1/bpel/docs/workflow/oracle/tip)
searched for similar issue in OTN it says issue fixed by upgrading Oracle AS, we are using 10.1.3.4 MLR#8
http://kr.forums.oracle.com/forums/thread.jspa?threadID=835446
steps followed.
Creating Cross-Reference Tables
Complete the following procedure to create cross-reference tables.
To create cross-reference tables
1 Navigate to the following directory:
%SOAHOME%/SiebelODOPPIP/scripts/
2 Open the following file for editing:
xref.sh
3 Set the userid and passwd for logging into BPEL console on the appropriate lines.
4 Set the correct SOA_HOME location on the appropriate line.
5 Save and close the file.
6 Make the file executeable:
chmod +x xref.sh
dos2unix xref.sh
7 Change directory (cd) to integration/esb/bin under %SOAHOME%.
8 Execute ../../../SiebelODOPPIP/scripts/xref.sh.
I am using SOA suite 10.1.3.3 and getting same error
Error: Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/xref/tool/AdminTool

Hi Abhijeet,
please check in transaction FI01, about your data consistencies. You can use this wiki help in terms of Address, it it found any useful facts for you
Address Checks - Business Address Services (BC-SRV-ADR) - SAP Library

OBI 11G sUnquotedTableName.empty() error while creating a report

hello guru's
We have a problem when trying to build a report in OBI 11G. We have migrated an RPD from 10 to 11 and one 1 installation DEV all is OK, on TEST we get all kind of problems.
One of the main issues is when trying to build a report and clicking on the + to expand a node of a dimension object we hget the sUnquotedTableName.empty() error
When going to the logs I see the following details of the error.
Does anyone have a clue and can help us out?
Koen Verheyen
ProblemhMessage Level 10
Relationship ID 0:1
Component OBIPS
Module saw.httpserver.processrequest
Host XXXXXXX
Host IP Address XXXXXX
Thread ID 2836335504
ECID 0000Ijcd5UzFw000jzwkno1Clgr10001eK
Message
Assertion failure: !sUnquotedTableName.empty() at line 1936 of /scratch/aime1/adestore/views/aime1_dadvfa0138/bifndn/analytics_web/main/project/webutil/tablenameutils.cpp
Supplemental Detail
File:tablenameutils.cpp
Line:1936
Location:
saw.httpserver.processrequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadpool
saw.threads
SessionID: 07vh3ae7bqk8nsnslpm32fhtcm9nsc5cd7va98q
AuthProps: AuthSchema=UidPwd|PWD=******|UID=koen_verheyen|User=koen_verheyen|RunAs=koen_verheyen
ecid: 0000Ijcd5UzFw000jzwkno1Clgr10001eK,0:1
ThreadID: 2836335504
HttpCommand: JSONRequestTableColumns
RemoteIP: 10.10.1.15
HttpArgs:

Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

Error while creating materialized view which using database link

Helo!
I'm getting error "ORA-00942: table or view does not exist" when I want to create materialized view.
Details:
1. On destination database I create a database link:
CREATE DATABASE LINK SDATABASE
CONNECT TO MYUSER
IDENTIFIED BY MYUSERPASS
USING 'ORCL';
=> Command "SELECT * FROM TABLE1@SDATABASE" returns data normally!
2. On source database I create MATERIALIZED VIEW LOG:
CREATE MATERIALIZED VIEW LOG
ON TABLE1
WITH PRIMARY KEY
INCLUDING NEW VALUES;
3. Now, when I want to create MATERIALIZED VIEW on destination database:
CREATE MATERIALIZED VIEW TABLE1
REFRESH FAST
START WITH SYSDATE
NEXT SYSDATE + 1/1440
WITH PRIMARY KEY
AS SELECT * FROM TABLE1@SDATABASE;
...I get error "ORA-00942: table or view does not exist"!
How is that possible if command "SELECT * FROM TABLE1@SDATABASE" returns data normally?
Thanks,
Voranc

And, I'm using Oracle 10g.
Voranc

Strange error while creating form/report pages [ORA-20001]

While creating two new pages with a form and report on it, I've got a strange error. I tried to create the pages several times, but I always got the same error:
ORA-20001: Unable to create query and update page. ORA-20001: Unable to create form on table. ORA-20001: Error creating shortcut id="" ORA-00001: unique constraint (FLOWS_030000.WWV_FLOW_SHORTCUT_IDX1) violated
Error creating query and update.
Return to application.
I'm using the wizard to get the pages, like I did many times before (without problems), but this time it will not work!
Greetings,
Jan

Below is a view or sql query i want to create in XE to show users report on startdate,end date,road name,etc,i am having a problem making this view work when i put the code in the sql script. Kindly help me with this if you can please. Thanks. CREATE OR REPLACE FORCE VIEW "RESULTS_DETAILS_VIEW" ("STARTDATE","ENDDATE","ROAD","NAME","STATUS","TYPE","UTILITIES","DATES","LUTON",
AS SELECT
d.Startdate,
d.EndDate,
l.Road,
u.Name,
ws.Status,
wt.Type,
cb.startdate,
cb.enddate,
cb.road,
cb.utility,
cb.type,
cb.status
FROM
Dates d,
Luton l,
Utilities u,
WorkStatus ws,
WorkType wt,
Comb cb
WHERE cb.startDate = d.StartDate
AND cb.endDate = d.EndDate
AND cb.road = l.Road
AND cb.utility = u.Name
AND cb.type = wt.Type
AND cb.status = ws.Status
WITH READ ONLY
/

Getting errors while creating model in webdynpro(using JAVA)

hii ,
am using EJBs ....n while creating model in webdynpro, while trying to include jars of wrapper class and command bean in model its giving an error that the jars already exist in model classes....
plz help out....

hi,
if you r importing the bean for second or nth time , delete your previous imports from model in your application and also delete the previous mappings in the component controller and corresponding view controllers and recreate it.(importing the JARs of both EJB and Bean in WD Library and recraete the java build paths,references) .
revert back if issue persists..
Thank you
Shravan.

Error while creating a report that uses Oracle OCI JDBC connectivity

Similar Messages

Maybe you are looking for